--- /dev/null
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -11,6 +11,8 @@ obj-$(CONFIG_USB_DWC2) += dwc2/
+
+ obj-$(CONFIG_USB_MON) += mon/
+
++obj-$(CONFIG_USB_PHY) += phy/
++
+ obj-$(CONFIG_PCI) += host/
+ obj-$(CONFIG_USB_EHCI_HCD) += host/
+ obj-$(CONFIG_USB_ISP116X_HCD) += host/
+--- a/drivers/usb/core/hcd-pci.c
++++ b/drivers/usb/core/hcd-pci.c
+@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+ goto disable_pci;
+ }
+
++
++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++ hcd->amd_resume_bug = 0;
++#else
+ hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+ driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
++#endif
+
+ if (driver->flags & HCD_MEMORY) {
+ /* EHCI, OHCI */
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -1286,7 +1286,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
+ if (type != HUB_SUSPEND) {
+ /* Disconnect all the children */
+ for (i = 0; i < hdev->maxchild; ++i) {
+- if (hub->ports[i]->child)
++ if (hub->ports[i] && hub->ports[i]->child)
+ usb_disconnect(&hub->ports[i]->child);
+ }
+ }
+--- a/drivers/usb/core/port.c
++++ b/drivers/usb/core/port.c
+@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_port *peer;
+
+- peer = port_dev->peer;
+- if (peer)
+- unlink_peers(port_dev, peer);
+- device_unregister(&port_dev->dev);
++ if(port_dev) {
++ peer = port_dev->peer;
++ if (peer)
++ unlink_peers(port_dev, peer);
++ device_unregister(&port_dev->dev);
++ }
+ }
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -32,7 +32,12 @@ config USB_XHCI_PCI
+ default y
+
+ config USB_XHCI_PLATFORM
+- tristate
++ tristate "xHCI platform"
++
++config USB_MT7621_XHCI_PLATFORM
++ bool "MTK MT7621 xHCI"
++ depends on USB_XHCI_PLATFORM
++ depends on SOC_MT7621
+
+ config USB_XHCI_MVEBU
+ tristate "xHCI support for Marvell Armada 375/38x"
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -16,7 +16,12 @@ xhci-hcd-y := xhci.o xhci-mem.o
+ xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
+ xhci-hcd-y += xhci-trace.o
+
++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
++endif
++
+ xhci-plat-hcd-y := xhci-plat.o
++
+ ifneq ($(CONFIG_USB_XHCI_MVEBU), )
+ xhci-plat-hcd-y += xhci-mvebu.o
+ endif
+@@ -26,9 +31,14 @@ endif
+
+ obj-$(CONFIG_USB_WHCI_HCD) += whci/
+
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ obj-$(CONFIG_PCI) += pci-quirks.o
++endif
+
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
++endif
++
+ obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
+
+ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -33,6 +33,8 @@
+ #include <linux/usb.h>
+ #include <linux/usb/hcd.h>
+ #include <linux/usb/ehci_pdriver.h>
++#include <linux/usb/phy.h>
++#include <linux/usb/otg.h>
+
+ #include "ehci.h"
+
+@@ -255,6 +257,15 @@ static int ehci_platform_probe(struct platform_device *dev)
+ hcd->rsrc_start = res_mem->start;
+ hcd->rsrc_len = resource_size(res_mem);
+
++#ifdef CONFIG_USB_PHY
++ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++ if (!IS_ERR_OR_NULL(hcd->phy)) {
++ otg_set_host(hcd->phy->otg,
++ &hcd->self);
++ usb_phy_init(hcd->phy);
++ }
++#endif
++
+ hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ if (IS_ERR(hcd->regs)) {
+ err = PTR_ERR(hcd->regs);
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-7621.c
+@@ -0,0 +1,445 @@
++#include "mtk-phy.h"
++
++#ifdef CONFIG_PROJECT_7621
++#include "mtk-phy-7621.h"
++
++//not used on SoC
++PHY_INT32 phy_init(struct u3phy_info *info){
++ return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
++ return PHY_TRUE;
++}
++
++//--------------------------------------------------------
++// Function : fgEyeScanHelper_CheckPtInRegion()
++// Description : Check if the test point is in a rectangle region.
++// If it is in the rectangle, also check if this point
++// is on the multiple of deltaX and deltaY.
++// Parameter : strucScanRegion * prEye - the region
++// BYTE bX
++// BYTE bY
++// Return : BYTE - TRUE : This point needs to be tested
++// FALSE: This point will be omitted
++// Note : First check within the rectangle.
++// Secondly, use modulous to check if the point will be tested.
++//--------------------------------------------------------
++static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
++{
++ PHY_INT8 fgValid = true;
++
++
++ /// Be careful, the axis origin is on the TOP-LEFT corner.
++ /// Therefore the top-left point has the minimum X and Y
++ /// Botton-right point is the maximum X and Y
++ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
++ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
++ {
++ // With the region, now check whether or not the input test point is
++ // on the multiples of X and Y
++ // Do not have to worry about negative value, because we have already
++ // check the input bX, and bY is within the region.
++ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
++ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
++ {
++ // if the division will have remainder, that means
++ // the input test point is on the multiples of X and Y
++ fgValid = false;
++ }
++ else
++ {
++ }
++ }
++ else
++ {
++
++ fgValid = false;
++ }
++ return fgValid;
++}
++
++//--------------------------------------------------------
++// Function : EyeScanHelper_RunTest()
++// Description : Enable the test, and wait til it is completed
++// Parameter : None
++// Return : None
++// Note : None
++//--------------------------------------------------------
++static void EyeScanHelper_RunTest(struct u3phy_info *info)
++{
++ DRV_UDELAY(100);
++ // Disable the test
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0
++ DRV_UDELAY(100);
++ // Run the test
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1
++ DRV_UDELAY(100);
++ // Wait til it's done
++ //RGS_SSUSB_RX_EYE_CNT_RDY
++ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
++ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
++}
++
++//--------------------------------------------------------
++// Function : fgEyeScanHelper_CalNextPoint()
++// Description : Calcualte the test point for the measurement
++// Parameter : None
++// Return : BOOL - TRUE : the next point is within the
++// boundaryof HW limit
++// FALSE: the next point is out of the HW limit
++// Note : The next point is obtained by calculating
++// from the bottom left of the region rectangle
++// and then scanning up until it reaches the upper
++// limit. At this time, the x will increment, and
++// start scanning downwards until the y hits the
++// zero.
++//--------------------------------------------------------
++static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
++{
++ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
++ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
++ )
++ {
++ /// Reaches the limit of Y axis
++ /// Increment X
++ _bXcurr++;
++ _fgXChged = true;
++ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
++
++ if (_bXcurr > MAX_X)
++ {
++ return false;
++ }
++ }
++ else
++ {
++ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
++ _fgXChged = false;
++ }
++ return PHY_TRUE;
++}
++
++PHY_INT32 eyescan_init(struct u3phy_info *info){
++ //initial PHY setting
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
++ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
++ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
++ return PHY_TRUE;
++}
++
++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
++ PHY_INT32 cOfst = 0;
++ PHY_UINT8 bIdxX = 0;
++ PHY_UINT8 bIdxY = 0;
++ //PHY_INT8 bCnt = 0;
++ PHY_UINT8 bIdxCycCnt = 0;
++ PHY_INT8 fgValid;
++ PHY_INT8 cX;
++ PHY_INT8 cY;
++ PHY_UINT8 bExtendCnt;
++ PHY_INT8 isContinue;
++ //PHY_INT8 isBreak;
++ PHY_UINT32 wErr0 = 0, wErr1 = 0;
++ //PHY_UINT32 temp;
++
++ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++
++ _rEye1.bX_tl = x_t1;
++ _rEye1.bY_tl = y_t1;
++ _rEye1.bX_br = x_br;
++ _rEye1.bY_br = y_br;
++ _rEye1.bDeltaX = delta_x;
++ _rEye1.bDeltaY = delta_y;
++
++ _rEye2.bX_tl = x_t1;
++ _rEye2.bY_tl = y_t1;
++ _rEye2.bX_br = x_br;
++ _rEye2.bY_br = y_br;
++ _rEye2.bDeltaX = delta_x;
++ _rEye2.bDeltaY = delta_y;
++
++ _rTestCycle.wEyeCnt = eye_cnt;
++ _rTestCycle.bNumOfEyeCnt = num_cnt;
++ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
++ _rTestCycle.bPICalEn = PI_cal_en;
++
++ _bXcurr = 0;
++ _bYcurr = 0;
++ _eScanDir = SCAN_DN;
++ _fgXChged = false;
++
++ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
++ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
++ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);
++
++ //force SIGDET to OFF
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
++ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0
++
++ // RX_TRI_DET_EN to Disable
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
++ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0
++
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0
++
++
++ if (PI_cal_en){
++ // PI Calibration
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
++
++ DRV_UDELAY(20);
++
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
++ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
++ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO
++
++ printk(KERN_ERR "PI result: %d\n", _bPIResult);
++ }
++ // Read Initial DAC
++ // Set CYCLE
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
++ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT
++
++ // Eye Monitor Feature
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
++ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
++
++ // Move X,Y to the top-left corner
++ for (cOfst = 0; cOfst >= -64; cOfst--)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
++ }
++ for (cOfst = 0; cOfst < 64; cOfst++)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y
++ }
++ //ClearErrorResult
++ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
++ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
++ {
++ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
++ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
++ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
++ }
++ }
++ }
++ isContinue = true;
++ while(isContinue){
++ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
++ // The point is within the boundary, then let's check if it is within
++ // the testing region.
++ // The point is only test-able if one of the eye region
++ // includes this point.
++ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
++ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
++ // Translate bX and bY to 2's complement from where the origin was on the
++ // top left corner.
++ // 0x40 and 0x3F needs a bit of thinking!!!! >"<
++ cX = (_bXcurr ^ 0x40);
++ cY = (_bYcurr ^ 0x3F);
++
++ // Set X if necessary
++ if (_fgXChged == true)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET
++ }
++ // Set Y
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y
++
++ /// Test this point!
++ if (fgValid){
++ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
++ {
++ //run test
++ EyeScanHelper_RunTest(info);
++ }
++ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
++ {
++ EyeScanHelper_RunTest(info);
++ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
++ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
++
++ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
++ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
++
++ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
++// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
++// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
++ }
++ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
++ }
++ else{
++
++ }
++ if (fgEyeScanHelper_CalNextPoint() == false){
++#if 0
++ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
++ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
++#endif
++ printk(KERN_ERR "end of eye scan\n");
++ isContinue = false;
++ }
++ }
++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
++
++ // Move X,Y to the top-left corner
++ for (cOfst = 63; cOfst >= 0; cOfst--)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
++ }
++ for (cOfst = 63; cOfst >= 0; cOfst--)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
++
++ }
++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
++
++ printk(KERN_ERR "PI result: %d\n", _bPIResult);
++ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
++ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
++
++ return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
++ return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
++ return PHY_TRUE;
++}
++
++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
++ PHY_INT32 i=0;
++ //PHY_INT32 j=0;
++ //PHY_INT8 u1SrCalVal = 0;
++ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
++ PHY_INT32 fgRet = 0;
++ PHY_INT32 u4FmOut = 0;
++ PHY_INT32 u4Tmp = 0;
++ //PHY_INT32 temp;
++
++ // => RG_USB20_HSTX_SRCAL_EN = 1
++ // enable HS TX SR calibration
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
++ DRV_MSLEEP(1);
++
++ // => RG_FRCK_EN = 1
++ // Enable free run clock
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
++
++ // MT6290 HS signal quality patch
++ // => RG_CYCLECNT = 400
++ // Setting cyclecnt =400
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
++
++ // => RG_FREQDET_EN = 1
++ // Enable frequency meter
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
++
++ // wait for FM detection done, set 10ms timeout
++ for(i=0; i<10; i++){
++ // => u4FmOut = USB_FM_OUT
++ // read FM_OUT
++ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
++ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
++
++ // check if FM detection done
++ if (u4FmOut != 0)
++ {
++ fgRet = 0;
++ printk("FM detection done! loop = %d\n", i);
++
++ break;
++ }
++
++ fgRet = 1;
++ DRV_MSLEEP(1);
++ }
++ // => RG_FREQDET_EN = 0
++ // disable frequency meter
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
++
++ // => RG_FRCK_EN = 0
++ // disable free run clock
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
++
++ // => RG_USB20_HSTX_SRCAL_EN = 0
++ // disable HS TX SR calibration
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
++ DRV_MSLEEP(1);
++
++ if(u4FmOut == 0){
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
++
++ fgRet = 1;
++ }
++ else{
++ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
++ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
++ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
++ }
++ return fgRet;
++}
++
++#endif
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-7621.h
+@@ -0,0 +1,2871 @@
++#ifdef CONFIG_PROJECT_7621
++#ifndef __MTK_PHY_7621_H
++#define __MTK_PHY_7621_H
++
++#define U2_SR_COEF_7621 28
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u2phy_reg {
++ //0x0
++ PHY_LE32 u2phyac0;
++ PHY_LE32 u2phyac1;
++ PHY_LE32 u2phyac2;
++ PHY_LE32 reserve0;
++ //0x10
++ PHY_LE32 u2phyacr0;
++ PHY_LE32 u2phyacr1;
++ PHY_LE32 u2phyacr2;
++ PHY_LE32 u2phyacr3;
++ //0x20
++ PHY_LE32 u2phyacr4;
++ PHY_LE32 u2phyamon0;
++ PHY_LE32 reserve1[2];
++ //0x30~0x50
++ PHY_LE32 reserve2[12];
++ //0x60
++ PHY_LE32 u2phydcr0;
++ PHY_LE32 u2phydcr1;
++ PHY_LE32 u2phydtm0;
++ PHY_LE32 u2phydtm1;
++ //0x70
++ PHY_LE32 u2phydmon0;
++ PHY_LE32 u2phydmon1;
++ PHY_LE32 u2phydmon2;
++ PHY_LE32 u2phydmon3;
++ //0x80
++ PHY_LE32 u2phybc12c;
++ PHY_LE32 u2phybc12c1;
++ PHY_LE32 reserve3[2];
++ //0x90~0xe0
++ PHY_LE32 reserve4[24];
++ //0xf0
++ PHY_LE32 reserve6[3];
++ PHY_LE32 regfcom;
++};
++
++//U3D_U2PHYAC0
++#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28
++#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26
++#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24
++#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23
++#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16
++#define RG_USB20_REF_EN (0x1<<15) //15:15
++#define RG_USB20_INTR_EN (0x1<<14) //14:14
++#define RG_USB20_BG_TRIM (0xf<<8) //11:8
++#define RG_USB20_BG_RBSEL (0x3<<6) //7:6
++#define RG_USB20_BG_RASEL (0x3<<4) //5:4
++#define RG_USB20_BGR_DIV (0x3<<2) //3:2
++#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1
++#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0
++
++//U3D_U2PHYAC1
++#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28
++#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24
++#define RG_USB20_MPX_SEL (0xff<<16) //23:16
++#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12
++#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8
++#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3
++#define RG_USB20_USBPLL_LF (0x1<<2) //2:2
++#define RG_USB20_USBPLL_BR (0x1<<1) //1:1
++#define RG_USB20_USBPLL_BP (0x1<<0) //0:0
++
++//U3D_U2PHYAC2
++#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17
++#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16
++#define RG_USB20_CLKREF_REV (0xff<<0) //7:0
++
++//U3D_U2PHYACR0
++#define RG_USB20_ICUSB_EN (0x1<<24) //24:24
++#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23
++#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16
++#define RG_USB20_LS_CR (0x7<<12) //14:12
++#define RG_USB20_FS_CR (0x7<<8) //10:8
++#define RG_USB20_LS_SR (0x7<<4) //6:4
++#define RG_USB20_FS_SR (0x7<<0) //2:0
++
++//U3D_U2PHYACR1
++#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28
++#define RG_USB20_SQD (0x3<<24) //25:24
++#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20
++#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19
++#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18
++#define RG_USB20_INLPBK_EN (0x1<<17) //17:17
++#define RG_USB20_CHIRP_EN (0x1<<16) //16:16
++#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15
++#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8
++#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7
++#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0
++
++//U3D_U2PHYACR2
++#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29
++#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28
++#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27
++#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24
++#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22
++#define RG_USB20_DISCD (0x3<<20) //21:20
++#define RG_USB20_DISCTH (0xf<<16) //19:16
++#define RG_USB20_SQCAL_EN (0x1<<15) //15:15
++#define RG_USB20_SQCAL (0xf<<8) //11:8
++#define RG_USB20_SQTH (0xf<<0) //3:0
++
++//U3D_U2PHYACR3
++#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28
++#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26
++#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24
++#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23
++#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20
++#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19
++#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18
++#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17
++#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16
++#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13
++#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12
++#define RG_USB20_EN_PU_DM (0x1<<11) //11:11
++#define RG_USB20_EN_PD_DM (0x1<<10) //10:10
++#define RG_USB20_EN_PU_DP (0x1<<9) //9:9
++#define RG_USB20_EN_PD_DP (0x1<<8) //8:8
++#define RG_USB20_PHY_REV (0xff<<0) //7:0
++
++//U3D_U2PHYACR4
++#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18
++#define RG_USB20_DM_100K_EN (0x1<<17) //17:17
++#define USB20_DP_100K_EN (0x1<<16) //16:16
++#define USB20_GPIO_DM_I (0x1<<15) //15:15
++#define USB20_GPIO_DP_I (0x1<<14) //14:14
++#define USB20_GPIO_DM_OE (0x1<<13) //13:13
++#define USB20_GPIO_DP_OE (0x1<<12) //12:12
++#define RG_USB20_GPIO_CTL (0x1<<9) //9:9
++#define USB20_GPIO_MODE (0x1<<8) //8:8
++#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5
++#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4
++#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2
++#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0
++
++//U3D_U2PHYAMON0
++#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1
++#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0
++
++//U3D_U2PHYDCR0
++#define RG_USB20_CDR_TST (0x3<<30) //31:30
++#define RG_USB20_GATED_ENB (0x1<<29) //29:29
++#define RG_USB20_TESTMODE (0x3<<26) //27:26
++#define RG_USB20_PLL_STABLE (0x1<<25) //25:25
++#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24
++#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8
++#define RG_USB20_EBTHRLD (0x1<<7) //7:7
++#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6
++#define RG_USB20_TX_TST (0x1<<5) //5:5
++#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4
++#define RG_USB20_CDR_FILT (0xf<<0) //3:0
++
++//U3D_U2PHYDCR1
++#define RG_USB20_PROBE_SEL (0xff<<24) //31:24
++#define RG_USB20_DRVVBUS (0x1<<23) //23:23
++#define RG_DEBUG_EN (0x1<<22) //22:22
++#define RG_USB20_OTG_PROBE (0x3<<20) //21:20
++#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18
++#define RG_USB20_BERTH (0x3<<16) //17:16
++#define RG_USB20_LBMODE (0x3<<13) //14:13
++#define RG_USB20_FORCE_TAP (0x1<<12) //12:12
++#define RG_USB20_TAPSEL (0xfff<<0) //11:0
++
++//U3D_U2PHYDTM0
++#define RG_UART_MODE (0x3<<30) //31:30
++#define FORCE_UART_I (0x1<<29) //29:29
++#define FORCE_UART_BIAS_EN (0x1<<28) //28:28
++#define FORCE_UART_TX_OE (0x1<<27) //27:27
++#define FORCE_UART_EN (0x1<<26) //26:26
++#define FORCE_USB_CLKEN (0x1<<25) //25:25
++#define FORCE_DRVVBUS (0x1<<24) //24:24
++#define FORCE_DATAIN (0x1<<23) //23:23
++#define FORCE_TXVALID (0x1<<22) //22:22
++#define FORCE_DM_PULLDOWN (0x1<<21) //21:21
++#define FORCE_DP_PULLDOWN (0x1<<20) //20:20
++#define FORCE_XCVRSEL (0x1<<19) //19:19
++#define FORCE_SUSPENDM (0x1<<18) //18:18
++#define FORCE_TERMSEL (0x1<<17) //17:17
++#define FORCE_OPMODE (0x1<<16) //16:16
++#define UTMI_MUXSEL (0x1<<15) //15:15
++#define RG_RESET (0x1<<14) //14:14
++#define RG_DATAIN (0xf<<10) //13:10
++#define RG_TXVALIDH (0x1<<9) //9:9
++#define RG_TXVALID (0x1<<8) //8:8
++#define RG_DMPULLDOWN (0x1<<7) //7:7
++#define RG_DPPULLDOWN (0x1<<6) //6:6
++#define RG_XCVRSEL (0x3<<4) //5:4
++#define RG_SUSPENDM (0x1<<3) //3:3
++#define RG_TERMSEL (0x1<<2) //2:2
++#define RG_OPMODE (0x3<<0) //1:0
++
++//U3D_U2PHYDTM1
++#define RG_USB20_PRBS7_EN (0x1<<31) //31:31
++#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24
++#define RG_USB20_CLK48M_EN (0x1<<23) //23:23
++#define RG_USB20_CLK60M_EN (0x1<<22) //22:22
++#define RG_UART_I (0x1<<19) //19:19
++#define RG_UART_BIAS_EN (0x1<<18) //18:18
++#define RG_UART_TX_OE (0x1<<17) //17:17
++#define RG_UART_EN (0x1<<16) //16:16
++#define FORCE_VBUSVALID (0x1<<13) //13:13
++#define FORCE_SESSEND (0x1<<12) //12:12
++#define FORCE_BVALID (0x1<<11) //11:11
++#define FORCE_AVALID (0x1<<10) //10:10
++#define FORCE_IDDIG (0x1<<9) //9:9
++#define FORCE_IDPULLUP (0x1<<8) //8:8
++#define RG_VBUSVALID (0x1<<5) //5:5
++#define RG_SESSEND (0x1<<4) //4:4
++#define RG_BVALID (0x1<<3) //3:3
++#define RG_AVALID (0x1<<2) //2:2
++#define RG_IDDIG (0x1<<1) //1:1
++#define RG_IDPULLUP (0x1<<0) //0:0
++
++//U3D_U2PHYDMON0
++#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0
++
++//U3D_U2PHYDMON1
++#define USB20_UART_O (0x1<<31) //31:31
++#define RGO_USB20_LB_PASS (0x1<<30) //30:30
++#define RGO_USB20_LB_DONE (0x1<<29) //29:29
++#define AD_USB20_BVALID (0x1<<28) //28:28
++#define USB20_IDDIG (0x1<<27) //27:27
++#define AD_USB20_VBUSVALID (0x1<<26) //26:26
++#define AD_USB20_SESSEND (0x1<<25) //25:25
++#define AD_USB20_AVALID (0x1<<24) //24:24
++#define USB20_LINE_STATE (0x3<<22) //23:22
++#define USB20_HST_DISCON (0x1<<21) //21:21
++#define USB20_TX_READY (0x1<<20) //20:20
++#define USB20_RX_ERROR (0x1<<19) //19:19
++#define USB20_RX_ACTIVE (0x1<<18) //18:18
++#define USB20_RX_VALIDH (0x1<<17) //17:17
++#define USB20_RX_VALID (0x1<<16) //16:16
++#define USB20_DATA_OUT (0xffff<<0) //15:0
++
++//U3D_U2PHYDMON2
++#define RGO_TXVALID_CNT (0xff<<24) //31:24
++#define RGO_RXACTIVE_CNT (0xff<<16) //23:16
++#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8
++#define USB20_PROBE_OUT (0xff<<0) //7:0
++
++//U3D_U2PHYDMON3
++#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16
++#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3
++#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2
++#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1
++#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0
++
++//U3D_U2PHYBC12C
++#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28
++#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24
++#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16
++#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14
++#define RG_CHGDT_VDATSRC (0x1<<13) //13:13
++#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10
++#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8
++#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7
++#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6
++#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5
++#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4
++#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3
++#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2
++#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1
++#define RG_CHGDT_EN (0x1<<0) //0:0
++
++//U3D_U2PHYBC12C1
++#define RG_CHGDT_REV (0xff<<0) //7:0
++
++//U3D_REGFCOM
++#define RG_PAGE (0xff<<24) //31:24
++#define I2C_MODE (0x1<<16) //16:16
++
++
++/* OFFSET */
++
++//U3D_U2PHYAC0
++#define RG_USB20_USBPLL_DIVEN_OFST (28)
++#define RG_USB20_USBPLL_CKCTRL_OFST (26)
++#define RG_USB20_USBPLL_PREDIV_OFST (24)
++#define RG_USB20_USBPLL_FORCE_ON_OFST (23)
++#define RG_USB20_USBPLL_FBDIV_OFST (16)
++#define RG_USB20_REF_EN_OFST (15)
++#define RG_USB20_INTR_EN_OFST (14)
++#define RG_USB20_BG_TRIM_OFST (8)
++#define RG_USB20_BG_RBSEL_OFST (6)
++#define RG_USB20_BG_RASEL_OFST (4)
++#define RG_USB20_BGR_DIV_OFST (2)
++#define RG_SIFSLV_CHP_EN_OFST (1)
++#define RG_SIFSLV_BGR_EN_OFST (0)
++
++//U3D_U2PHYAC1
++#define RG_USB20_VRT_VREF_SEL_OFST (28)
++#define RG_USB20_TERM_VREF_SEL_OFST (24)
++#define RG_USB20_MPX_SEL_OFST (16)
++#define RG_USB20_MPX_OUT_SEL_OFST (12)
++#define RG_USB20_TX_PH_ROT_SEL_OFST (8)
++#define RG_USB20_USBPLL_ACCEN_OFST (3)
++#define RG_USB20_USBPLL_LF_OFST (2)
++#define RG_USB20_USBPLL_BR_OFST (1)
++#define RG_USB20_USBPLL_BP_OFST (0)
++
++//U3D_U2PHYAC2
++#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17)
++#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16)
++#define RG_USB20_CLKREF_REV_OFST (0)
++
++//U3D_U2PHYACR0
++#define RG_USB20_ICUSB_EN_OFST (24)
++#define RG_USB20_HSTX_SRCAL_EN_OFST (23)
++#define RG_USB20_HSTX_SRCTRL_OFST (16)
++#define RG_USB20_LS_CR_OFST (12)
++#define RG_USB20_FS_CR_OFST (8)
++#define RG_USB20_LS_SR_OFST (4)
++#define RG_USB20_FS_SR_OFST (0)
++
++//U3D_U2PHYACR1
++#define RG_USB20_INIT_SQ_EN_DG_OFST (28)
++#define RG_USB20_SQD_OFST (24)
++#define RG_USB20_HSTX_TMODE_SEL_OFST (20)
++#define RG_USB20_HSTX_TMODE_EN_OFST (19)
++#define RG_USB20_PHYD_MONEN_OFST (18)
++#define RG_USB20_INLPBK_EN_OFST (17)
++#define RG_USB20_CHIRP_EN_OFST (16)
++#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15)
++#define RG_USB20_DM_ABIST_SELE_OFST (8)
++#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7)
++#define RG_USB20_DP_ABIST_SELE_OFST (0)
++
++//U3D_U2PHYACR2
++#define RG_USB20_OTG_ABIST_SELE_OFST (29)
++#define RG_USB20_OTG_ABIST_EN_OFST (28)
++#define RG_USB20_OTG_VBUSCMP_EN_OFST (27)
++#define RG_USB20_OTG_VBUSTH_OFST (24)
++#define RG_USB20_DISC_FIT_EN_OFST (22)
++#define RG_USB20_DISCD_OFST (20)
++#define RG_USB20_DISCTH_OFST (16)
++#define RG_USB20_SQCAL_EN_OFST (15)
++#define RG_USB20_SQCAL_OFST (8)
++#define RG_USB20_SQTH_OFST (0)
++
++//U3D_U2PHYACR3
++#define RG_USB20_HSTX_DBIST_OFST (28)
++#define RG_USB20_HSTX_BIST_EN_OFST (26)
++#define RG_USB20_HSTX_I_EN_MODE_OFST (24)
++#define RG_USB20_HSRX_TMODE_EN_OFST (23)
++#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20)
++#define RG_USB20_USB11_TMODE_EN_OFST (19)
++#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18)
++#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17)
++#define RG_USB20_TMODE_FS_LS_MODE_OFST (16)
++#define RG_USB20_HS_TERM_EN_MODE_OFST (13)
++#define RG_USB20_PUPD_BIST_EN_OFST (12)
++#define RG_USB20_EN_PU_DM_OFST (11)
++#define RG_USB20_EN_PD_DM_OFST (10)
++#define RG_USB20_EN_PU_DP_OFST (9)
++#define RG_USB20_EN_PD_DP_OFST (8)
++#define RG_USB20_PHY_REV_OFST (0)
++
++//U3D_U2PHYACR4
++#define RG_USB20_DP_100K_MODE_OFST (18)
++#define RG_USB20_DM_100K_EN_OFST (17)
++#define USB20_DP_100K_EN_OFST (16)
++#define USB20_GPIO_DM_I_OFST (15)
++#define USB20_GPIO_DP_I_OFST (14)
++#define USB20_GPIO_DM_OE_OFST (13)
++#define USB20_GPIO_DP_OE_OFST (12)
++#define RG_USB20_GPIO_CTL_OFST (9)
++#define USB20_GPIO_MODE_OFST (8)
++#define RG_USB20_TX_BIAS_EN_OFST (5)
++#define RG_USB20_TX_VCMPDN_EN_OFST (4)
++#define RG_USB20_HS_SQ_EN_MODE_OFST (2)
++#define RG_USB20_HS_RCV_EN_MODE_OFST (0)
++
++//U3D_U2PHYAMON0
++#define RGO_USB20_GPIO_DM_O_OFST (1)
++#define RGO_USB20_GPIO_DP_O_OFST (0)
++
++//U3D_U2PHYDCR0
++#define RG_USB20_CDR_TST_OFST (30)
++#define RG_USB20_GATED_ENB_OFST (29)
++#define RG_USB20_TESTMODE_OFST (26)
++#define RG_USB20_PLL_STABLE_OFST (25)
++#define RG_USB20_PLL_FORCE_ON_OFST (24)
++#define RG_USB20_PHYD_RESERVE_OFST (8)
++#define RG_USB20_EBTHRLD_OFST (7)
++#define RG_USB20_EARLY_HSTX_I_OFST (6)
++#define RG_USB20_TX_TST_OFST (5)
++#define RG_USB20_NEGEDGE_ENB_OFST (4)
++#define RG_USB20_CDR_FILT_OFST (0)
++
++//U3D_U2PHYDCR1
++#define RG_USB20_PROBE_SEL_OFST (24)
++#define RG_USB20_DRVVBUS_OFST (23)
++#define RG_DEBUG_EN_OFST (22)
++#define RG_USB20_OTG_PROBE_OFST (20)
++#define RG_USB20_SW_PLLMODE_OFST (18)
++#define RG_USB20_BERTH_OFST (16)
++#define RG_USB20_LBMODE_OFST (13)
++#define RG_USB20_FORCE_TAP_OFST (12)
++#define RG_USB20_TAPSEL_OFST (0)
++
++//U3D_U2PHYDTM0
++#define RG_UART_MODE_OFST (30)
++#define FORCE_UART_I_OFST (29)
++#define FORCE_UART_BIAS_EN_OFST (28)
++#define FORCE_UART_TX_OE_OFST (27)
++#define FORCE_UART_EN_OFST (26)
++#define FORCE_USB_CLKEN_OFST (25)
++#define FORCE_DRVVBUS_OFST (24)
++#define FORCE_DATAIN_OFST (23)
++#define FORCE_TXVALID_OFST (22)
++#define FORCE_DM_PULLDOWN_OFST (21)
++#define FORCE_DP_PULLDOWN_OFST (20)
++#define FORCE_XCVRSEL_OFST (19)
++#define FORCE_SUSPENDM_OFST (18)
++#define FORCE_TERMSEL_OFST (17)
++#define FORCE_OPMODE_OFST (16)
++#define UTMI_MUXSEL_OFST (15)
++#define RG_RESET_OFST (14)
++#define RG_DATAIN_OFST (10)
++#define RG_TXVALIDH_OFST (9)
++#define RG_TXVALID_OFST (8)
++#define RG_DMPULLDOWN_OFST (7)
++#define RG_DPPULLDOWN_OFST (6)
++#define RG_XCVRSEL_OFST (4)
++#define RG_SUSPENDM_OFST (3)
++#define RG_TERMSEL_OFST (2)
++#define RG_OPMODE_OFST (0)
++
++//U3D_U2PHYDTM1
++#define RG_USB20_PRBS7_EN_OFST (31)
++#define RG_USB20_PRBS7_BITCNT_OFST (24)
++#define RG_USB20_CLK48M_EN_OFST (23)
++#define RG_USB20_CLK60M_EN_OFST (22)
++#define RG_UART_I_OFST (19)
++#define RG_UART_BIAS_EN_OFST (18)
++#define RG_UART_TX_OE_OFST (17)
++#define RG_UART_EN_OFST (16)
++#define FORCE_VBUSVALID_OFST (13)
++#define FORCE_SESSEND_OFST (12)
++#define FORCE_BVALID_OFST (11)
++#define FORCE_AVALID_OFST (10)
++#define FORCE_IDDIG_OFST (9)
++#define FORCE_IDPULLUP_OFST (8)
++#define RG_VBUSVALID_OFST (5)
++#define RG_SESSEND_OFST (4)
++#define RG_BVALID_OFST (3)
++#define RG_AVALID_OFST (2)
++#define RG_IDDIG_OFST (1)
++#define RG_IDPULLUP_OFST (0)
++
++//U3D_U2PHYDMON0
++#define RG_USB20_PRBS7_BERTH_OFST (0)
++
++//U3D_U2PHYDMON1
++#define USB20_UART_O_OFST (31)
++#define RGO_USB20_LB_PASS_OFST (30)
++#define RGO_USB20_LB_DONE_OFST (29)
++#define AD_USB20_BVALID_OFST (28)
++#define USB20_IDDIG_OFST (27)
++#define AD_USB20_VBUSVALID_OFST (26)
++#define AD_USB20_SESSEND_OFST (25)
++#define AD_USB20_AVALID_OFST (24)
++#define USB20_LINE_STATE_OFST (22)
++#define USB20_HST_DISCON_OFST (21)
++#define USB20_TX_READY_OFST (20)
++#define USB20_RX_ERROR_OFST (19)
++#define USB20_RX_ACTIVE_OFST (18)
++#define USB20_RX_VALIDH_OFST (17)
++#define USB20_RX_VALID_OFST (16)
++#define USB20_DATA_OUT_OFST (0)
++
++//U3D_U2PHYDMON2
++#define RGO_TXVALID_CNT_OFST (24)
++#define RGO_RXACTIVE_CNT_OFST (16)
++#define RGO_USB20_LB_BERCNT_OFST (8)
++#define USB20_PROBE_OUT_OFST (0)
++
++//U3D_U2PHYDMON3
++#define RGO_USB20_PRBS7_ERRCNT_OFST (16)
++#define RGO_USB20_PRBS7_DONE_OFST (3)
++#define RGO_USB20_PRBS7_LOCK_OFST (2)
++#define RGO_USB20_PRBS7_PASS_OFST (1)
++#define RGO_USB20_PRBS7_PASSTH_OFST (0)
++
++//U3D_U2PHYBC12C
++#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28)
++#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24)
++#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16)
++#define RG_CHGDT_ISRC_LEV_OFST (14)
++#define RG_CHGDT_VDATSRC_OFST (13)
++#define RG_CHGDT_BGVREF_SEL_OFST (10)
++#define RG_CHGDT_RDVREF_SEL_OFST (8)
++#define RG_CHGDT_ISRC_DP_OFST (7)
++#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6)
++#define RG_CHGDT_VDAT_DM_OFST (5)
++#define RG_CHGDT_OPOUT_DP_OFST (4)
++#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3)
++#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2)
++#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1)
++#define RG_CHGDT_EN_OFST (0)
++
++//U3D_U2PHYBC12C1
++#define RG_CHGDT_REV_OFST (0)
++
++//U3D_REGFCOM
++#define RG_PAGE_OFST (24)
++#define I2C_MODE_OFST (16)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phya_reg {
++ //0x0
++ PHY_LE32 reg0;
++ PHY_LE32 reg1;
++ PHY_LE32 reg2;
++ PHY_LE32 reg3;
++ //0x10
++ PHY_LE32 reg4;
++ PHY_LE32 reg5;
++ PHY_LE32 reg6;
++ PHY_LE32 reg7;
++ //0x20
++ PHY_LE32 reg8;
++ PHY_LE32 reg9;
++ PHY_LE32 rega;
++ PHY_LE32 regb;
++ //0x30
++ PHY_LE32 regc;
++ PHY_LE32 regd;
++ PHY_LE32 rege;
++};
++
++//U3D_reg0
++#define RG_SSUSB_BGR_EN (0x1<<31) //31:31
++#define RG_SSUSB_CHPEN (0x1<<30) //30:30
++#define RG_SSUSB_BG_DIV (0x3<<28) //29:28
++#define RG_SSUSB_INTR_EN (0x1<<26) //26:26
++#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24
++#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16
++#define RG_SSUSB_REF_EN (0x1<<15) //15:15
++#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11
++#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9
++#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7
++#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6
++#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0
++
++//U3D_reg1
++#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30
++#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27
++#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26
++#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25
++#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24
++#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8
++#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4
++#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2
++#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0
++
++//U3D_reg2
++#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31
++#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24
++#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22
++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21
++#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20
++#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19
++#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18
++#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17
++#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14
++#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13
++#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12
++#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11
++#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10
++#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9
++#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8
++
++//U3D_reg3
++#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16
++
++//U3D_reg4
++#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1
++
++//U3D_reg5
++#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29
++#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28
++#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27
++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26
++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25
++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24
++#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23
++#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22
++#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21
++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20
++#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0
++
++//U3D_reg6
++#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31
++#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30
++#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24
++#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23
++#define RG_SSUSB_TX_SR (0x7<<20) //22:20
++#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16
++#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14
++#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12
++#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11
++#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8
++#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7
++#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6
++#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5
++#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4
++
++//U3D_reg7
++#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12
++#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10
++#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8
++#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7
++#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6
++#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5
++#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4
++#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3
++#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2
++#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1
++#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0
++
++//U3D_reg8
++#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0
++
++//U3D_reg9
++#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0
++
++//U3D_regA
++#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31
++#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30
++#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29
++#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28
++#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21
++#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20
++#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17
++#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16
++#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15
++#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14
++#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13
++#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12
++#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11
++#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9
++#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8
++#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6
++#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4
++#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3
++#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2
++#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1
++#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0
++
++//U3D_regB
++#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31
++#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29
++#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26
++#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25
++#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24
++#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19
++#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18
++#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17
++#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14
++#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12
++#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7
++#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5
++#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3
++#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2
++
++//U3D_regC
++#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28
++#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16
++#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8
++#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0
++
++//U3D_redD
++#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8
++#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0
++
++//U3D_regE
++#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4
++#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3
++#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2
++#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1
++#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0
++
++
++/* OFFSET */
++
++//U3D_reg0
++#define RG_SSUSB_BGR_EN_OFST (31)
++#define RG_SSUSB_CHPEN_OFST (30)
++#define RG_SSUSB_BG_DIV_OFST (28)
++#define RG_SSUSB_INTR_EN_OFST (26)
++#define RG_SSUSB_MPX_OUT_SEL_OFST (24)
++#define RG_SSUSB_MPX_SEL_OFST (16)
++#define RG_SSUSB_REF_EN_OFST (15)
++#define RG_SSUSB_VRT_VREF_SEL_OFST (11)
++#define RG_SSUSB_BG_RASEL_OFST (9)
++#define RG_SSUSB_BG_RBSEL_OFST (7)
++#define RG_SSUSB_BG_MONEN_OFST (6)
++#define RG_PCIE_CLKDRV_OFFSET_OFST (0)
++
++//U3D_reg1
++#define RG_PCIE_CLKDRV_SLEW_OFST (30)
++#define RG_PCIE_CLKDRV_AMP_OFST (27)
++#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26)
++#define RG_SSUSB_XTAL_MON_EN_OFST (25)
++#define RG_SSUSB_XTAL_HYS_OFST (24)
++#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8)
++#define RG_SSUSB_SYSPLL_RESERVE_OFST (4)
++#define RG_SSUSB_SYSPLL_FBSEL_OFST (2)
++#define RG_SSUSB_SYSPLL_PREDIV_OFST (0)
++
++//U3D_reg2
++#define RG_SSUSB_SYSPLL_LF_OFST (31)
++#define RG_SSUSB_SYSPLL_FBDIV_OFST (24)
++#define RG_SSUSB_SYSPLL_POSDIV_OFST (22)
++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21)
++#define RG_SSUSB_SYSPLL_BLP_OFST (20)
++#define RG_SSUSB_SYSPLL_BP_OFST (19)
++#define RG_SSUSB_SYSPLL_BR_OFST (18)
++#define RG_SSUSB_SYSPLL_BC_OFST (17)
++#define RG_SSUSB_SYSPLL_DIVEN_OFST (14)
++#define RG_SSUSB_SYSPLL_FPEN_OFST (13)
++#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12)
++#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11)
++#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10)
++#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9)
++#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8)
++
++//U3D_reg3
++#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16)
++
++//U3D_reg4
++#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1)
++
++//U3D_reg5
++#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29)
++#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28)
++#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27)
++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26)
++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25)
++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24)
++#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23)
++#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22)
++#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21)
++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20)
++#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0)
++
++//U3D_reg6
++#define RG_SSUSB_TX250MCK_INVB_OFST (31)
++#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30)
++#define RG_SSUSB_IDRV_CALIB_OFST (24)
++#define RG_SSUSB_TX_R50_FON_OFST (23)
++#define RG_SSUSB_TX_SR_OFST (20)
++#define RG_SSUSB_TX_EIDLE_CM_OFST (16)
++#define RG_SSUSB_RXDET_RSEL_OFST (14)
++#define RG_SSUSB_RXDET_VTHSEL_OFST (12)
++#define RG_SSUSB_CKMON_EN_OFST (11)
++#define RG_SSUSB_CKMON_SEL_OFST (8)
++#define RG_SSUSB_TX_VLMON_EN_OFST (7)
++#define RG_SSUSB_TX_VLMON_SEL_OFST (6)
++#define RG_SSUSB_RXLBTX_EN_OFST (5)
++#define RG_SSUSB_TXLBRX_EN_OFST (4)
++
++//U3D_reg7
++#define RG_SSUSB_RESERVE_OFST (12)
++#define RG_SSUSB_PLL_CKCTRL_OFST (10)
++#define RG_SSUSB_PLL_POSDIV_OFST (8)
++#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7)
++#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6)
++#define RG_SSUSB_PLL_EP_EN_OFST (5)
++#define RG_SSUSB_PLL_VOD_EN_OFST (4)
++#define RG_SSUSB_PLL_V11_EN_OFST (3)
++#define RG_SSUSB_PLL_MONREF_EN_OFST (2)
++#define RG_SSUSB_PLL_MONCK_EN_OFST (1)
++#define RG_SSUSB_PLL_MONVC_EN_OFST (0)
++
++//U3D_reg8
++#define RG_SSUSB_PLL_RESERVE_OFST (0)
++
++//U3D_reg9
++#define RG_SSUSB_PLL_DDS_DMY_OFST (16)
++#define RG_SSUSB_PLL_SSC_PRD_OFST (0)
++
++//U3D_regA
++#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31)
++#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30)
++#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29)
++#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28)
++#define RG_SSUSB_PLL_DDS_VADJ_OFST (21)
++#define RG_SSUSB_PLL_DDS_MONEN_OFST (20)
++#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17)
++#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16)
++#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15)
++#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14)
++#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13)
++#define RG_SSUSB_CDR_OSCDET_EN_OFST (12)
++#define RG_SSUSB_CDR_MONMUX_OFST (11)
++#define RG_SSUSB_CDR_CKCTRL_OFST (9)
++#define RG_SSUSB_CDR_ACCEN_OFST (8)
++#define RG_SSUSB_CDR_BYPASS_OFST (6)
++#define RG_SSUSB_CDR_PI_SLEW_OFST (4)
++#define RG_SSUSB_CDR_EPEN_OFST (3)
++#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2)
++#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1)
++#define RG_SSUSB_CDR_MONEN_OFST (0)
++
++//U3D_regB
++#define RG_SSUSB_CDR_MONEN_DIG_OFST (31)
++#define RG_SSUSB_CDR_REGOD_OFST (29)
++#define RG_SSUSB_RX_DAC_EN_OFST (26)
++#define RG_SSUSB_RX_DAC_PWD_OFST (25)
++#define RG_SSUSB_EQ_CURSEL_OFST (24)
++#define RG_SSUSB_RX_DAC_MUX_OFST (19)
++#define RG_SSUSB_RX_R2T_EN_OFST (18)
++#define RG_SSUSB_RX_T2R_EN_OFST (17)
++#define RG_SSUSB_RX_50_LOWER_OFST (14)
++#define RG_SSUSB_RX_50_TAR_OFST (12)
++#define RG_SSUSB_RX_SW_CTRL_OFST (7)
++#define RG_PCIE_SIGDET_VTH_OFST (5)
++#define RG_PCIE_SIGDET_LPF_OFST (3)
++#define RG_SSUSB_LFPS_MON_EN_OFST (2)
++
++//U3D_regC
++#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28)
++#define RG_SSUSB_CDR_RESERVE_OFST (16)
++#define RG_SSUSB_RXAFE_RESERVE_OFST (8)
++#define RG_PCIE_RX_RESERVE_OFST (0)
++
++//U3D_redD
++#define RGS_SSUSB_CDR_NO_OSC_OFST (8)
++#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0)
++
++//U3D_regE
++#define RG_SSUSB_INT_BIAS_SEL_OFST (4)
++#define RG_SSUSB_EXT_BIAS_SEL_OFST (3)
++#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2)
++#define RG_SSUSB_RX_PD_RST_OFST (1)
++#define RG_SSUSB_RX_PD_RST_PASS_OFST (0)
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phya_da_reg {
++ //0x0
++ PHY_LE32 reg0;
++ PHY_LE32 reg1;
++ PHY_LE32 reg4;
++ PHY_LE32 reg5;
++ //0x10
++ PHY_LE32 reg6;
++ PHY_LE32 reg7;
++ PHY_LE32 reg8;
++ PHY_LE32 reg9;
++ //0x20
++ PHY_LE32 reg10;
++ PHY_LE32 reg12;
++ PHY_LE32 reg13;
++ PHY_LE32 reg14;
++ //0x30
++ PHY_LE32 reg15;
++ PHY_LE32 reg16;
++ PHY_LE32 reg19;
++ PHY_LE32 reg20;
++ //0x40
++ PHY_LE32 reg21;
++ PHY_LE32 reg23;
++ PHY_LE32 reg25;
++ PHY_LE32 reg26;
++ //0x50
++ PHY_LE32 reg28;
++ PHY_LE32 reg29;
++ PHY_LE32 reg30;
++ PHY_LE32 reg31;
++ //0x60
++ PHY_LE32 reg32;
++ PHY_LE32 reg33;
++};
++
++//U3D_reg0
++#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24
++#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23
++#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22
++#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21
++#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20
++#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18
++#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16
++#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14
++#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12
++#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10
++#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8
++#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6
++#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4
++#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0
++
++//U3D_reg1
++#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30
++#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29
++#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28
++#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27
++#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26
++#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25
++#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24
++#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18
++#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17
++#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16
++#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8
++#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3
++#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2
++#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1
++#define RG_PCIE_MODE_U3 (0x1<<0) //0:0
++
++//U3D_reg4
++#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22
++#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19
++#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16
++#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13
++#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10
++#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8
++#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6
++#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4
++#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0
++
++//U3D_reg5
++#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27
++#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24
++#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21
++#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18
++#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15
++#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12
++#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9
++#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6
++#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3
++#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0
++
++//U3D_reg6
++#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24
++#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16
++#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8
++#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4
++#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0
++
++//U3D_reg7
++#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24
++#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16
++#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8
++#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4
++#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0
++
++//U3D_reg8
++#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24
++#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16
++#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8
++#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0
++
++//U3D_reg9
++#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24
++#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16
++#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8
++#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0
++
++//U3D_reg10
++#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26
++#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24
++#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18
++#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16
++#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8
++#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0
++
++//U3D_reg12
++#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0
++
++//U3D_reg13
++#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0
++
++//U3D_reg14
++#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0
++
++//U3D_reg15
++#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0
++
++//U3D_reg16
++#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0
++
++//U3D_reg19
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0
++
++//U3D_reg20
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0
++
++//U3D_reg21
++#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0
++
++//U3D_reg23
++#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0
++
++//U3D_reg25
++#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0
++
++//U3D_reg26
++#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25
++#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24
++#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16
++#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8
++#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0
++
++//U3D_reg28
++#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24
++#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16
++#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10
++#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8
++#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0
++
++//U3D_reg29
++#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24
++#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16
++#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6
++#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3
++#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0
++
++//U3D_reg30
++#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24
++#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16
++#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6
++#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3
++#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0
++
++//U3D_reg31
++#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24
++#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16
++#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8
++#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0
++
++//U3D_reg32
++#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30
++#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28
++#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26
++#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24
++#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22
++#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20
++#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18
++#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16
++#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14
++#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12
++#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11
++#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10
++#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9
++#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8
++#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7
++#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0
++
++//U3D_reg33
++#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26
++#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25
++#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24
++#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23
++#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16
++#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8
++#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6
++#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4
++#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0
++
++
++/* OFFSET */
++
++//U3D_reg0
++#define RG_PCIE_SPEED_PE2D_OFST (24)
++#define RG_PCIE_SPEED_PE2H_OFST (23)
++#define RG_PCIE_SPEED_PE1D_OFST (22)
++#define RG_PCIE_SPEED_PE1H_OFST (21)
++#define RG_PCIE_SPEED_U3_OFST (20)
++#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18)
++#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16)
++#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14)
++#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12)
++#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10)
++#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8)
++#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6)
++#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4)
++#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2)
++#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0)
++
++//U3D_reg1
++#define RG_USB20_REFCK_SEL_PE2D_OFST (30)
++#define RG_USB20_REFCK_SEL_PE2H_OFST (29)
++#define RG_USB20_REFCK_SEL_PE1D_OFST (28)
++#define RG_USB20_REFCK_SEL_PE1H_OFST (27)
++#define RG_USB20_REFCK_SEL_U3_OFST (26)
++#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25)
++#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24)
++#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18)
++#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17)
++#define RG_PCIE_REFCK_DIV4_U3_OFST (16)
++#define RG_PCIE_MODE_PE2D_OFST (8)
++#define RG_PCIE_MODE_PE2H_OFST (3)
++#define RG_PCIE_MODE_PE1D_OFST (2)
++#define RG_PCIE_MODE_PE1H_OFST (1)
++#define RG_PCIE_MODE_U3_OFST (0)
++
++//U3D_reg4
++#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22)
++#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19)
++#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16)
++#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13)
++#define RG_SSUSB_PLL_DIVEN_U3_OFST (10)
++#define RG_SSUSB_PLL_BC_PE2D_OFST (8)
++#define RG_SSUSB_PLL_BC_PE2H_OFST (6)
++#define RG_SSUSB_PLL_BC_PE1D_OFST (4)
++#define RG_SSUSB_PLL_BC_PE1H_OFST (2)
++#define RG_SSUSB_PLL_BC_U3_OFST (0)
++
++//U3D_reg5
++#define RG_SSUSB_PLL_BR_PE2D_OFST (27)
++#define RG_SSUSB_PLL_BR_PE2H_OFST (24)
++#define RG_SSUSB_PLL_BR_PE1D_OFST (21)
++#define RG_SSUSB_PLL_BR_PE1H_OFST (18)
++#define RG_SSUSB_PLL_BR_U3_OFST (15)
++#define RG_SSUSB_PLL_IC_PE2D_OFST (12)
++#define RG_SSUSB_PLL_IC_PE2H_OFST (9)
++#define RG_SSUSB_PLL_IC_PE1D_OFST (6)
++#define RG_SSUSB_PLL_IC_PE1H_OFST (3)
++#define RG_SSUSB_PLL_IC_U3_OFST (0)
++
++//U3D_reg6
++#define RG_SSUSB_PLL_IR_PE2D_OFST (24)
++#define RG_SSUSB_PLL_IR_PE2H_OFST (16)
++#define RG_SSUSB_PLL_IR_PE1D_OFST (8)
++#define RG_SSUSB_PLL_IR_PE1H_OFST (4)
++#define RG_SSUSB_PLL_IR_U3_OFST (0)
++
++//U3D_reg7
++#define RG_SSUSB_PLL_BP_PE2D_OFST (24)
++#define RG_SSUSB_PLL_BP_PE2H_OFST (16)
++#define RG_SSUSB_PLL_BP_PE1D_OFST (8)
++#define RG_SSUSB_PLL_BP_PE1H_OFST (4)
++#define RG_SSUSB_PLL_BP_U3_OFST (0)
++
++//U3D_reg8
++#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24)
++#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16)
++#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8)
++#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2)
++#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0)
++
++//U3D_reg9
++#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24)
++#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16)
++#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8)
++#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0)
++
++//U3D_reg10
++#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26)
++#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24)
++#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18)
++#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16)
++#define RG_SSUSB_PLL_PREDIV_U3_OFST (8)
++#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0)
++
++//U3D_reg12
++#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0)
++
++//U3D_reg13
++#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0)
++
++//U3D_reg14
++#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0)
++
++//U3D_reg15
++#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0)
++
++//U3D_reg16
++#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0)
++
++//U3D_reg19
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0)
++
++//U3D_reg20
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0)
++
++//U3D_reg21
++#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0)
++
++//U3D_reg23
++#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0)
++
++//U3D_reg25
++#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0)
++
++//U3D_reg26
++#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25)
++#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24)
++#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16)
++#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8)
++#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0)
++
++//U3D_reg28
++#define RG_SSUSB_CDR_BPA_PE2D_OFST (24)
++#define RG_SSUSB_CDR_BPA_PE2H_OFST (16)
++#define RG_SSUSB_CDR_BPA_PE1D_OFST (10)
++#define RG_SSUSB_CDR_BPA_PE1H_OFST (8)
++#define RG_SSUSB_CDR_BPA_U3_OFST (0)
++
++//U3D_reg29
++#define RG_SSUSB_CDR_BPB_PE2D_OFST (24)
++#define RG_SSUSB_CDR_BPB_PE2H_OFST (16)
++#define RG_SSUSB_CDR_BPB_PE1D_OFST (6)
++#define RG_SSUSB_CDR_BPB_PE1H_OFST (3)
++#define RG_SSUSB_CDR_BPB_U3_OFST (0)
++
++//U3D_reg30
++#define RG_SSUSB_CDR_BR_PE2D_OFST (24)
++#define RG_SSUSB_CDR_BR_PE2H_OFST (16)
++#define RG_SSUSB_CDR_BR_PE1D_OFST (6)
++#define RG_SSUSB_CDR_BR_PE1H_OFST (3)
++#define RG_SSUSB_CDR_BR_U3_OFST (0)
++
++//U3D_reg31
++#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24)
++#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16)
++#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8)
++#define RG_SSUSB_CDR_FBDIV_U3_OFST (0)
++
++//U3D_reg32
++#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30)
++#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28)
++#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26)
++#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24)
++#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22)
++#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20)
++#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18)
++#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16)
++#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14)
++#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12)
++#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11)
++#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10)
++#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9)
++#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8)
++#define RG_SSUSB_CDR_KVSEL_U3_OFST (7)
++#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0)
++
++//U3D_reg33
++#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26)
++#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25)
++#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24)
++#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23)
++#define RG_SSUSB_RX_CMPWD_U3_OFST (16)
++#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8)
++#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6)
++#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4)
++#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2)
++#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phyd_reg {
++ //0x0
++ PHY_LE32 phyd_mix0;
++ PHY_LE32 phyd_mix1;
++ PHY_LE32 phyd_lfps0;
++ PHY_LE32 phyd_lfps1;
++ //0x10
++ PHY_LE32 phyd_impcal0;
++ PHY_LE32 phyd_impcal1;
++ PHY_LE32 phyd_txpll0;
++ PHY_LE32 phyd_txpll1;
++ //0x20
++ PHY_LE32 phyd_txpll2;
++ PHY_LE32 phyd_fl0;
++ PHY_LE32 phyd_mix2;
++ PHY_LE32 phyd_rx0;
++ //0x30
++ PHY_LE32 phyd_t2rlb;
++ PHY_LE32 phyd_cppat;
++ PHY_LE32 phyd_mix3;
++ PHY_LE32 phyd_ebufctl;
++ //0x40
++ PHY_LE32 phyd_pipe0;
++ PHY_LE32 phyd_pipe1;
++ PHY_LE32 phyd_mix4;
++ PHY_LE32 phyd_ckgen0;
++ //0x50
++ PHY_LE32 phyd_mix5;
++ PHY_LE32 phyd_reserved;
++ PHY_LE32 phyd_cdr0;
++ PHY_LE32 phyd_cdr1;
++ //0x60
++ PHY_LE32 phyd_pll_0;
++ PHY_LE32 phyd_pll_1;
++ PHY_LE32 phyd_bcn_det_1;
++ PHY_LE32 phyd_bcn_det_2;
++ //0x70
++ PHY_LE32 eq0;
++ PHY_LE32 eq1;
++ PHY_LE32 eq2;
++ PHY_LE32 eq3;
++ //0x80
++ PHY_LE32 eq_eye0;
++ PHY_LE32 eq_eye1;
++ PHY_LE32 eq_eye2;
++ PHY_LE32 eq_dfe0;
++ //0x90
++ PHY_LE32 eq_dfe1;
++ PHY_LE32 eq_dfe2;
++ PHY_LE32 eq_dfe3;
++ PHY_LE32 reserve0;
++ //0xa0
++ PHY_LE32 phyd_mon0;
++ PHY_LE32 phyd_mon1;
++ PHY_LE32 phyd_mon2;
++ PHY_LE32 phyd_mon3;
++ //0xb0
++ PHY_LE32 phyd_mon4;
++ PHY_LE32 phyd_mon5;
++ PHY_LE32 phyd_mon6;
++ PHY_LE32 phyd_mon7;
++ //0xc0
++ PHY_LE32 phya_rx_mon0;
++ PHY_LE32 phya_rx_mon1;
++ PHY_LE32 phya_rx_mon2;
++ PHY_LE32 phya_rx_mon3;
++ //0xd0
++ PHY_LE32 phya_rx_mon4;
++ PHY_LE32 phya_rx_mon5;
++ PHY_LE32 phyd_cppat2;
++ PHY_LE32 eq_eye3;
++ //0xe0
++ PHY_LE32 kband_out;
++ PHY_LE32 kband_out1;
++};
++
++//U3D_PHYD_MIX0
++#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31
++#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30
++#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29
++#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28
++#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27
++#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24
++#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16
++#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15
++#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14
++#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13
++#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12
++#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8
++#define RG_SSUSB_COMCNT (0xf<<4) //7:4
++#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0
++
++//U3D_PHYD_MIX1
++#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31
++#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28
++#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24
++#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23
++#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22
++#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16
++#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15
++#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14
++#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8
++#define RG_SSUSB_BERT_EN (0x1<<7) //7:7
++#define RG_SSUSB_SCP_TH (0x7<<4) //6:4
++#define RG_SSUSB_SCP_EN (0x1<<3) //3:3
++#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0
++
++//U3D_PHYD_LFPS0
++#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29
++#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24
++#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23
++#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22
++#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20
++#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16
++#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15
++#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14
++#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13
++#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8
++#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7
++#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6
++#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5
++#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0
++
++//U3D_PHYD_LFPS1
++#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28
++#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24
++#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16
++#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8
++#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0
++
++//U3D_PHYD_IMPCAL0
++#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31
++#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29
++#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24
++#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16
++#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10
++#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
++
++//U3D_PHYD_IMPCAL1
++#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31
++#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29
++#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24
++#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16
++#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10
++#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
++
++//U3D_PHYD_TXPLL0
++#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27
++#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25
++#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16
++#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12
++#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10
++#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0
++
++//U3D_PHYD_TXPLL1
++#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31
++#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30
++#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28
++#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27
++#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26
++#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25
++#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24
++#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23
++#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22
++#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16
++#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15
++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14
++#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12
++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11
++#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8
++#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7
++#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6
++#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5
++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4
++#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3
++#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2
++
++//U3D_PHYD_TXPLL2
++#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31
++#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30
++#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29
++#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28
++#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27
++#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25
++#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24
++#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16
++#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11
++#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10
++#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8
++#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7
++#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6
++#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0
++
++//U3D_PHYD_FL0
++#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16
++#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0
++
++//U3D_PHYD_MIX2
++#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31
++#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30
++#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29
++#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24
++#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18
++#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16
++#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8
++#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0
++
++//U3D_PHYD_RX0
++#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24
++#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16
++#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15
++#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14
++#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13
++#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11
++#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10
++#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9
++#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8
++#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7
++#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6
++#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5
++#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4
++#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3
++#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2
++#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1
++#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0
++
++//U3D_PHYD_T2RLB
++#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28
++#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27
++#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26
++#define RG_SSUSB_VALID_EN (0x1<<25) //25:25
++#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24
++#define RG_SSUSB_K_EMP (0xf<<20) //23:20
++#define RG_SSUSB_K_FUL (0xf<<16) //19:16
++#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12
++#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10
++#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8
++#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0
++
++//U3D_PHYD_CPPAT
++#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24
++#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21
++#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20
++#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16
++#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8
++#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0
++
++//U3D_PHYD_MIX3
++#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31
++#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30
++#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28
++#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24
++#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23
++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20
++#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19
++#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16
++#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15
++#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14
++#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13
++#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12
++#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11
++#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0
++
++//U3D_PHYD_EBUFCTL
++#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0
++
++//U3D_PHYD_PIPE0
++#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30
++#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29
++#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28
++#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26
++#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24
++#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23
++#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22
++#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21
++#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20
++#define RG_SSUSB_TXDATAK (0xf<<16) //19:16
++#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15
++#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14
++#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13
++#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12
++#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4
++#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1
++#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0
++
++//U3D_PHYD_PIPE1
++#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MIX4
++#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24
++#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16
++#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0
++
++//U3D_PHYD_CKGEN0
++#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27
++#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24
++#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8
++#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0
++
++//U3D_PHYD_MIX5
++#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16
++#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0
++
++//U3D_PHYD_RESERVED
++#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0
++//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11)
++//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10)
++
++//U3D_PHYD_CDR0
++#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28
++#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24
++#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16
++#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8
++#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0
++
++//U3D_PHYD_CDR1
++#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24
++#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16
++#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8
++#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6
++#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0
++
++//U3D_PHYD_PLL_0
++#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28
++#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27
++#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25
++#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15
++#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5
++#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4
++#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3
++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2
++#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1
++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0
++
++//U3D_PHYD_PLL_1
++#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
++#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
++#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
++#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
++
++//U3D_PHYD_BCN_DET_1
++#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16
++#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0
++
++//U3D_PHYD_BCN_DET_2
++#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16
++#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12
++#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0
++
++//U3D_EQ0
++#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0
++
++//U3D_EQ1
++#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0
++
++//U3D_EQ2
++#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14
++#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11
++#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8
++#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6
++#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3
++#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0
++
++//U3D_EQ3
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24
++#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7
++#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0
++
++//U3D_EQ_EYE0
++#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25
++#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24
++#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7
++#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4
++#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3
++
++//U3D_EQ_EYE1
++#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7
++
++//U3D_EQ_EYE2
++#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31
++#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24
++#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22
++#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16
++
++//U3D_EQ_DFE0
++#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28
++#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27
++#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24
++#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23
++#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0
++
++//U3D_EQ_DFE1
++#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16
++#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12
++#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8
++#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7
++#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6
++#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4
++#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2
++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1
++#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0
++
++//U3D_EQ_DFE2
++#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24
++#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16
++#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8
++#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0
++
++//U3D_EQ_DFE3
++#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MON0
++#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16
++#define RGS_SSUSB_LFPS (0xf<<12) //15:12
++#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8
++#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0
++
++//U3D_PHYD_MON1
++#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0
++
++//U3D_PHYD_MON2
++#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16
++#define RGS_SSUSB_RETRACK (0xf<<12) //15:12
++#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10
++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9
++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8
++#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0
++
++//U3D_PHYD_MON3
++#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16
++#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0
++
++//U3D_PHYD_MON4
++#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24
++#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16
++#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0
++
++//U3D_PHYD_MON5
++#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16
++#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15
++#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14
++#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13
++#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12
++#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11
++#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10
++#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9
++#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8
++#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6
++#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5
++#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4
++#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3
++#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2
++#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1
++#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0
++
++//U3D_PHYD_MON6
++#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30
++#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29
++#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24
++#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16
++#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8
++#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4
++#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0
++
++//U3D_PHYD_MON7
++#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8
++#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0
++
++//U3D_PHYA_RX_MON0
++#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24
++#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16
++#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON1
++#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24
++#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16
++#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON2
++#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31
++#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24
++#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16
++#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON3
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0
++
++//U3D_PHYA_RX_MON4
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0
++
++//U3D_PHYA_RX_MON5
++#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8
++#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7
++#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0
++
++//U3D_PHYD_CPPAT2
++#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16
++#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8
++#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0
++
++//U3D_EQ_EYE3
++#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24
++#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0
++
++//U3D_KBAND_OUT
++#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
++#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
++#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
++#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
++
++//U3D_KBAND_OUT1
++#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24
++#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16
++#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8
++#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0
++
++
++/* OFFSET */
++
++//U3D_PHYD_MIX0
++#define RG_SSUSB_P_P3_TX_NG_OFST (31)
++#define RG_SSUSB_TSEQ_EN_OFST (30)
++#define RG_SSUSB_TSEQ_POLEN_OFST (29)
++#define RG_SSUSB_TSEQ_POL_OFST (28)
++#define RG_SSUSB_P_P3_PCLK_NG_OFST (27)
++#define RG_SSUSB_TSEQ_TH_OFST (24)
++#define RG_SSUSB_PRBS_BERTH_OFST (16)
++#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15)
++#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14)
++#define RG_SSUSB_PRBS_EN_OFST (13)
++#define RG_SSUSB_BPSLOCK_OFST (12)
++#define RG_SSUSB_RTCOMCNT_OFST (8)
++#define RG_SSUSB_COMCNT_OFST (4)
++#define RG_SSUSB_PRBSEL_CALIB_OFST (0)
++
++//U3D_PHYD_MIX1
++#define RG_SSUSB_SLEEP_EN_OFST (31)
++#define RG_SSUSB_PRBSEL_PCS_OFST (28)
++#define RG_SSUSB_TXLFPS_PRD_OFST (24)
++#define RG_SSUSB_P_RX_P0S_CK_OFST (23)
++#define RG_SSUSB_P_TX_P0S_CK_OFST (22)
++#define RG_SSUSB_PDNCTL_OFST (16)
++#define RG_SSUSB_TX_DRV_EN_OFST (15)
++#define RG_SSUSB_TX_DRV_SEL_OFST (14)
++#define RG_SSUSB_TX_DRV_DLY_OFST (8)
++#define RG_SSUSB_BERT_EN_OFST (7)
++#define RG_SSUSB_SCP_TH_OFST (4)
++#define RG_SSUSB_SCP_EN_OFST (3)
++#define RG_SSUSB_RXANSIDEC_TEST_OFST (0)
++
++//U3D_PHYD_LFPS0
++#define RG_SSUSB_LFPS_PWD_OFST (30)
++#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29)
++#define RG_SSUSB_RXLFPS_OVF_OFST (24)
++#define RG_SSUSB_P3_ENTRY_SEL_OFST (23)
++#define RG_SSUSB_P3_ENTRY_OFST (22)
++#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20)
++#define RG_SSUSB_RXLFPS_CDRTH_OFST (16)
++#define RG_SSUSB_LOCK5G_BLOCK_OFST (15)
++#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14)
++#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13)
++#define RG_SSUSB_RXLFPS_LOB_OFST (8)
++#define RG_SSUSB_TXLFPS_EN_OFST (7)
++#define RG_SSUSB_TXLFPS_SEL_OFST (6)
++#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5)
++#define RG_SSUSB_RXLFPS_UPB_OFST (0)
++
++//U3D_PHYD_LFPS1
++#define RG_SSUSB_RX_IMP_BIAS_OFST (28)
++#define RG_SSUSB_TX_IMP_BIAS_OFST (24)
++#define RG_SSUSB_FWAKE_TH_OFST (16)
++#define RG_SSUSB_RXLFPS_UDF_OFST (8)
++#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0)
++
++//U3D_PHYD_IMPCAL0
++#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31)
++#define RG_SSUSB_TX_IMPCAL_EN_OFST (30)
++#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29)
++#define RG_SSUSB_TX_IMPSEL_OFST (24)
++#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16)
++#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10)
++#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0)
++
++//U3D_PHYD_IMPCAL1
++#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31)
++#define RG_SSUSB_RX_IMPCAL_EN_OFST (30)
++#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29)
++#define RG_SSUSB_RX_IMPSEL_OFST (24)
++#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16)
++#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10)
++#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0)
++
++//U3D_PHYD_TXPLL0
++#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27)
++#define RG_SSUSB_TXPLL_ON_OFST (26)
++#define RG_SSUSB_FORCE_TXPLLON_OFST (25)
++#define RG_SSUSB_TXPLL_STBCYC_OFST (16)
++#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12)
++#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10)
++#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0)
++
++//U3D_PHYD_TXPLL1
++#define RG_SSUSB_PLL_NCPO_EN_OFST (31)
++#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30)
++#define RG_SSUSB_PLL_NCPO_CHG_OFST (28)
++#define RG_SSUSB_PLL_DDS_RSTB_OFST (27)
++#define RG_SSUSB_PLL_DDS_PWDB_OFST (26)
++#define RG_SSUSB_PLL_DDSEN_OFST (25)
++#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24)
++#define RG_SSUSB_PLL_PWD_OFST (23)
++#define RG_SSUSB_RX_AFE_PWD_OFST (22)
++#define RG_SSUSB_PLL_TCADJ_OFST (16)
++#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15)
++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14)
++#define RG_SSUSB_FORCE_CDR_PWD_OFST (13)
++#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12)
++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11)
++#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9)
++#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8)
++#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7)
++#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6)
++#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5)
++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4)
++#define RG_SSUSB_FORCE_PLL_PWD_OFST (3)
++#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2)
++
++//U3D_PHYD_TXPLL2
++#define RG_SSUSB_TX_LFPS_EN_OFST (31)
++#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30)
++#define RG_SSUSB_TX_LFPS_OFST (29)
++#define RG_SSUSB_FORCE_TX_LFPS_OFST (28)
++#define RG_SSUSB_RXPLL_STB_OFST (27)
++#define RG_SSUSB_TXPLL_STB_OFST (26)
++#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25)
++#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24)
++#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16)
++#define RG_SSUSB_RXPLL_STBMODE_OFST (11)
++#define RG_SSUSB_RXPLL_ON_OFST (10)
++#define RG_SSUSB_FORCE_RXPLLON_OFST (9)
++#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8)
++#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7)
++#define RG_SSUSB_CDR_PWD_OFST (6)
++#define RG_SSUSB_CDR_TCADJ_OFST (0)
++
++//U3D_PHYD_FL0
++#define RG_SSUSB_RX_FL_TARGET_OFST (16)
++#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0)
++
++//U3D_PHYD_MIX2
++#define RG_SSUSB_RX_EQ_RST_OFST (31)
++#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30)
++#define RG_SSUSB_RXVAL_RST_OFST (29)
++#define RG_SSUSB_RXVAL_CNT_OFST (24)
++#define RG_SSUSB_CDROS_EN_OFST (18)
++#define RG_SSUSB_CDR_LCKOP_OFST (16)
++#define RG_SSUSB_RX_FL_LOCKTH_OFST (8)
++#define RG_SSUSB_RX_FL_OFFSET_OFST (0)
++
++//U3D_PHYD_RX0
++#define RG_SSUSB_T2RLB_BERTH_OFST (24)
++#define RG_SSUSB_T2RLB_PAT_OFST (16)
++#define RG_SSUSB_T2RLB_EN_OFST (15)
++#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14)
++#define RG_SSUSB_T2RLB_SERIAL_OFST (13)
++#define RG_SSUSB_T2RLB_MODE_OFST (11)
++#define RG_SSUSB_RX_SAOSC_EN_OFST (10)
++#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9)
++#define RG_SSUSB_RX_DFE_OPTION_OFST (8)
++#define RG_SSUSB_RX_DFE_EN_OFST (7)
++#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6)
++#define RG_SSUSB_RX_EQ_EN_OFST (5)
++#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4)
++#define RG_SSUSB_RX_SAOSC_RST_OFST (3)
++#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2)
++#define RG_SSUSB_RX_DFE_RST_OFST (1)
++#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0)
++
++//U3D_PHYD_T2RLB
++#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28)
++#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27)
++#define RG_SSUSB_BPANSIENC_OFST (26)
++#define RG_SSUSB_VALID_EN_OFST (25)
++#define RG_SSUSB_EBUF_SRST_OFST (24)
++#define RG_SSUSB_K_EMP_OFST (20)
++#define RG_SSUSB_K_FUL_OFST (16)
++#define RG_SSUSB_T2RLB_BDATRST_OFST (12)
++#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10)
++#define RG_SSUSB_T2RLB_PATMODE_OFST (8)
++#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0)
++
++//U3D_PHYD_CPPAT
++#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24)
++#define RG_SSUSB_CPPAT_TOZ_OFST (21)
++#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20)
++#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16)
++#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8)
++#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0)
++
++//U3D_PHYD_MIX3
++#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31)
++#define RG_SSUSB_P_CDROS_EN_OFST (30)
++#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28)
++#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24)
++#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23)
++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20)
++#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19)
++#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16)
++#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15)
++#define RG_SSUSB_PLL_SSCEN_OFST (14)
++#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13)
++#define RG_SSUSB_CDR_PI_PWD_OFST (12)
++#define RG_SSUSB_CDR_PI_MODE_OFST (11)
++#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0)
++
++//U3D_PHYD_EBUFCTL
++#define RG_SSUSB_EBUFCTL_OFST (0)
++
++//U3D_PHYD_PIPE0
++#define RG_SSUSB_RXTERMINATION_OFST (30)
++#define RG_SSUSB_RXEQTRAINING_OFST (29)
++#define RG_SSUSB_RXPOLARITY_OFST (28)
++#define RG_SSUSB_TXDEEMPH_OFST (26)
++#define RG_SSUSB_POWERDOWN_OFST (24)
++#define RG_SSUSB_TXONESZEROS_OFST (23)
++#define RG_SSUSB_TXELECIDLE_OFST (22)
++#define RG_SSUSB_TXDETECTRX_OFST (21)
++#define RG_SSUSB_PIPE_SEL_OFST (20)
++#define RG_SSUSB_TXDATAK_OFST (16)
++#define RG_SSUSB_CDR_STABLE_SEL_OFST (15)
++#define RG_SSUSB_CDR_STABLE_OFST (14)
++#define RG_SSUSB_CDR_RSTB_SEL_OFST (13)
++#define RG_SSUSB_CDR_RSTB_OFST (12)
++#define RG_SSUSB_P_ERROR_SEL_OFST (4)
++#define RG_SSUSB_TXMARGIN_OFST (1)
++#define RG_SSUSB_TXCOMPLIANCE_OFST (0)
++
++//U3D_PHYD_PIPE1
++#define RG_SSUSB_TXDATA_OFST (0)
++
++//U3D_PHYD_MIX4
++#define RG_SSUSB_CDROS_CNT_OFST (24)
++#define RG_SSUSB_T2RLB_BER_EN_OFST (16)
++#define RG_SSUSB_T2RLB_BER_RATE_OFST (0)
++
++//U3D_PHYD_CKGEN0
++#define RG_SSUSB_RFIFO_IMPLAT_OFST (27)
++#define RG_SSUSB_TFIFO_PSEL_OFST (24)
++#define RG_SSUSB_CKGEN_PSEL_OFST (8)
++#define RG_SSUSB_RXCK_INV_OFST (0)
++
++//U3D_PHYD_MIX5
++#define RG_SSUSB_PRB_SEL_OFST (16)
++#define RG_SSUSB_RXPLL_STBCYC_OFST (0)
++
++//U3D_PHYD_RESERVED
++#define RG_SSUSB_PHYD_RESERVE_OFST (0)
++//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11)
++//#define RG_SSUSB_RX_SIGDET_EN_OFST (12)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10)
++
++//U3D_PHYD_CDR0
++#define RG_SSUSB_CDR_BIC_LTR_OFST (28)
++#define RG_SSUSB_CDR_BIC_LTD0_OFST (24)
++#define RG_SSUSB_CDR_BC_LTD1_OFST (16)
++#define RG_SSUSB_CDR_BC_LTR_OFST (8)
++#define RG_SSUSB_CDR_BC_LTD0_OFST (0)
++
++//U3D_PHYD_CDR1
++#define RG_SSUSB_CDR_BIR_LTD1_OFST (24)
++#define RG_SSUSB_CDR_BIR_LTR_OFST (16)
++#define RG_SSUSB_CDR_BIR_LTD0_OFST (8)
++#define RG_SSUSB_CDR_BW_SEL_OFST (6)
++#define RG_SSUSB_CDR_BIC_LTD1_OFST (0)
++
++//U3D_PHYD_PLL_0
++#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28)
++#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27)
++#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26)
++#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25)
++#define RG_SSUSB_P_EQ_T_SEL_OFST (15)
++#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5)
++#define RG_SSUSB_PLLBAND_RECAL_OFST (4)
++#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3)
++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2)
++#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1)
++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0)
++
++//U3D_PHYD_PLL_1
++#define RG_SSUSB_CDR_BAND_5G_OFST (24)
++#define RG_SSUSB_CDR_BAND_2P5G_OFST (16)
++#define RG_SSUSB_PLL_BAND_5G_OFST (8)
++#define RG_SSUSB_PLL_BAND_2P5G_OFST (0)
++
++//U3D_PHYD_BCN_DET_1
++#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16)
++#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0)
++
++//U3D_PHYD_BCN_DET_2
++#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16)
++#define RG_SSUSB_BCN_DET_DIS_OFST (12)
++#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0)
++
++//U3D_EQ0
++#define RG_SSUSB_EQ_DLHL_LFI_OFST (24)
++#define RG_SSUSB_EQ_DHHL_LFI_OFST (16)
++#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8)
++#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0)
++
++//U3D_EQ1
++#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24)
++#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16)
++#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8)
++#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0)
++
++//U3D_EQ2
++#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24)
++#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16)
++#define RG_SSUSB_EQ_STOPTIME_OFST (14)
++#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11)
++#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8)
++#define RG_SSUSB_EQ_STARTTIME_OFST (6)
++#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3)
++#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0)
++
++//U3D_EQ3
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28)
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24)
++#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16)
++#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8)
++#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7)
++#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0)
++
++//U3D_EQ_EYE0
++#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25)
++#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24)
++#define RG_SSUSB_EQ_EYE0_Y_OFST (16)
++#define RG_SSUSB_EQ_EYE1_Y_OFST (8)
++#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7)
++#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4)
++#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3)
++
++//U3D_EQ_EYE1
++#define RG_SSUSB_EQ_SIGDET_OFST (24)
++#define RG_SSUSB_EQ_EYE_MASK_OFST (7)
++
++//U3D_EQ_EYE2
++#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31)
++#define RG_SSUSB_EQ_SD_CNT1_OFST (24)
++#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22)
++#define RG_SSUSB_EQ_SD_CNT0_OFST (16)
++
++//U3D_EQ_DFE0
++#define RG_SSUSB_EQ_LEQMAX_OFST (28)
++#define RG_SSUSB_EQ_DFEX_EN_OFST (27)
++#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24)
++#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23)
++#define RG_SSUSB_EQ_PIEYE_INI_OFST (16)
++#define RG_SSUSB_EQ_PI90_INI_OFST (8)
++#define RG_SSUSB_EQ_PI0_INI_OFST (0)
++
++//U3D_EQ_DFE1
++#define RG_SSUSB_EQ_REV_OFST (16)
++#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12)
++#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8)
++#define RG_SSUSB_EQ_DFEX_RST_OFST (7)
++#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6)
++#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4)
++#define RG_SSUSB_EQ_DFEX_DIS_OFST (2)
++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1)
++#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0)
++
++//U3D_EQ_DFE2
++#define RG_SSUSB_EQ_MON_SEL_OFST (24)
++#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16)
++#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8)
++#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0)
++
++//U3D_EQ_DFE3
++#define RG_SSUSB_EQ_RESERVED_OFST (0)
++
++//U3D_PHYD_MON0
++#define RGS_SSUSB_BERT_BERC_OFST (16)
++#define RGS_SSUSB_LFPS_OFST (12)
++#define RGS_SSUSB_TRAINDEC_OFST (8)
++#define RGS_SSUSB_SCP_PAT_OFST (0)
++
++//U3D_PHYD_MON1
++#define RGS_SSUSB_RX_FL_OUT_OFST (0)
++
++//U3D_PHYD_MON2
++#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16)
++#define RGS_SSUSB_RETRACK_OFST (12)
++#define RGS_SSUSB_RXPLL_LOCK_OFST (10)
++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9)
++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8)
++#define RGS_SSUSB_PDNCTL_OFST (0)
++
++//U3D_PHYD_MON3
++#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16)
++#define RGS_SSUSB_PRBS_ERRCNT_OFST (0)
++
++//U3D_PHYD_MON4
++#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24)
++#define RGS_SSUSB_SCP_DETCNT_OFST (16)
++#define RGS_SSUSB_TSEQ_DETCNT_OFST (0)
++
++//U3D_PHYD_MON5
++#define RGS_SSUSB_EBUFMSG_OFST (16)
++#define RGS_SSUSB_BERT_LOCK_OFST (15)
++#define RGS_SSUSB_SCP_DET_OFST (14)
++#define RGS_SSUSB_TSEQ_DET_OFST (13)
++#define RGS_SSUSB_EBUF_UDF_OFST (12)
++#define RGS_SSUSB_EBUF_OVF_OFST (11)
++#define RGS_SSUSB_PRBS_PASSTH_OFST (10)
++#define RGS_SSUSB_PRBS_PASS_OFST (9)
++#define RGS_SSUSB_PRBS_LOCK_OFST (8)
++#define RGS_SSUSB_T2RLB_ERR_OFST (6)
++#define RGS_SSUSB_T2RLB_PASSTH_OFST (5)
++#define RGS_SSUSB_T2RLB_PASS_OFST (4)
++#define RGS_SSUSB_T2RLB_LOCK_OFST (3)
++#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2)
++#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1)
++#define RGS_SSUSB_RXDETECTED_OFST (0)
++
++//U3D_PHYD_MON6
++#define RGS_SSUSB_SIGCAL_DONE_OFST (30)
++#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29)
++#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24)
++#define RGS_SSUSB_RX_IMP_SEL_OFST (16)
++#define RGS_SSUSB_TX_IMP_SEL_OFST (8)
++#define RGS_SSUSB_TFIFO_MSG_OFST (4)
++#define RGS_SSUSB_RFIFO_MSG_OFST (0)
++
++//U3D_PHYD_MON7
++#define RGS_SSUSB_FT_OUT_OFST (8)
++#define RGS_SSUSB_PRB_OUT_OFST (0)
++
++//U3D_PHYA_RX_MON0
++#define RGS_SSUSB_EQ_DCLEQ_OFST (24)
++#define RGS_SSUSB_EQ_DCD0H_OFST (16)
++#define RGS_SSUSB_EQ_DCD0L_OFST (8)
++#define RGS_SSUSB_EQ_DCD1H_OFST (0)
++
++//U3D_PHYA_RX_MON1
++#define RGS_SSUSB_EQ_DCD1L_OFST (24)
++#define RGS_SSUSB_EQ_DCE0_OFST (16)
++#define RGS_SSUSB_EQ_DCE1_OFST (8)
++#define RGS_SSUSB_EQ_DCHHL_OFST (0)
++
++//U3D_PHYA_RX_MON2
++#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31)
++#define RGS_SSUSB_EQ_DCLHL_OFST (24)
++#define RGS_SSUSB_EQ_STATUS_OFST (16)
++#define RGS_SSUSB_EQ_DCEYE0_OFST (8)
++#define RGS_SSUSB_EQ_DCEYE1_OFST (0)
++
++//U3D_PHYA_RX_MON3
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0)
++
++//U3D_PHYA_RX_MON4
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0)
++
++//U3D_PHYA_RX_MON5
++#define RGS_SSUSB_EQ_DCLEQOS_OFST (8)
++#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7)
++#define RGS_SSUSB_EQ_PILPO_OFST (0)
++
++//U3D_PHYD_CPPAT2
++#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16)
++#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8)
++#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0)
++
++//U3D_EQ_EYE3
++#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24)
++#define RG_SSUSB_EQ_EYE_CNT_OFST (0)
++
++//U3D_KBAND_OUT
++#define RGS_SSUSB_CDR_BAND_5G_OFST (24)
++#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16)
++#define RGS_SSUSB_PLL_BAND_5G_OFST (8)
++#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0)
++
++//U3D_KBAND_OUT1
++#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24)
++#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16)
++#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8)
++#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phyd_bank2_reg {
++ //0x0
++ PHY_LE32 b2_phyd_top1;
++ PHY_LE32 b2_phyd_top2;
++ PHY_LE32 b2_phyd_top3;
++ PHY_LE32 b2_phyd_top4;
++ //0x10
++ PHY_LE32 b2_phyd_top5;
++ PHY_LE32 b2_phyd_top6;
++ PHY_LE32 b2_phyd_top7;
++ PHY_LE32 b2_phyd_p_sigdet1;
++ //0x20
++ PHY_LE32 b2_phyd_p_sigdet2;
++ PHY_LE32 b2_phyd_p_sigdet_cal1;
++ PHY_LE32 b2_phyd_rxdet1;
++ PHY_LE32 b2_phyd_rxdet2;
++ //0x30
++ PHY_LE32 b2_phyd_misc0;
++ PHY_LE32 b2_phyd_misc2;
++ PHY_LE32 b2_phyd_misc3;
++ PHY_LE32 reserve0;
++ //0x40
++ PHY_LE32 b2_rosc_0;
++ PHY_LE32 b2_rosc_1;
++ PHY_LE32 b2_rosc_2;
++ PHY_LE32 b2_rosc_3;
++ //0x50
++ PHY_LE32 b2_rosc_4;
++ PHY_LE32 b2_rosc_5;
++ PHY_LE32 b2_rosc_6;
++ PHY_LE32 b2_rosc_7;
++ //0x60
++ PHY_LE32 b2_rosc_8;
++ PHY_LE32 b2_rosc_9;
++ PHY_LE32 b2_rosc_a;
++ PHY_LE32 reserve1;
++ //0x70~0xd0
++ PHY_LE32 reserve2[28];
++ //0xe0
++ PHY_LE32 phyd_version;
++ PHY_LE32 phyd_model;
++};
++
++//U3D_B2_PHYD_TOP1
++#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28
++#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24
++#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17
++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16
++#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15
++#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14
++#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12
++#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11
++#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10
++#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8
++#define RG_SSUSB_RATE (0x1<<6) //6:6
++#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5
++#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4
++#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3
++#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1
++#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0
++
++//U3D_B2_PHYD_TOP2
++#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30
++#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24
++#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22
++#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16
++#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14
++#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8
++#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6
++#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0
++
++//U3D_B2_PHYD_TOP3
++#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25
++#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24
++#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16
++#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8
++#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0
++
++//U3D_B2_PHYD_TOP4
++#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28
++#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24
++#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16
++#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8
++#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0
++
++//U3D_B2_PHYD_TOP5
++#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24
++#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16
++#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8
++#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0
++
++//U3D_B2_PHYD_TOP6
++#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28
++#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24
++#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16
++#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8
++#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0
++
++//U3D_B2_PHYD_TOP7
++#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24
++#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16
++#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8
++#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0
++
++//U3D_B2_PHYD_P_SIGDET1
++#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31
++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24
++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16
++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8
++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0
++
++//U3D_B2_PHYD_P_SIGDET2
++#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29
++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28
++#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24
++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16
++#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10
++#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8
++#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6
++#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5
++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4
++#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2
++#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0
++
++//U3D_B2_PHYD_P_SIGDET_CAL1
++#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16
++#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3
++#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2
++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1
++#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0
++
++//U3D_B2_PHYD_RXDET1
++#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31
++#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30
++#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29
++#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28
++#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27
++#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18
++#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9
++#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0
++
++//U3D_B2_PHYD_RXDET2
++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31
++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30
++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29
++#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18
++#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9
++#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0
++
++//U3D_B2_PHYD_MISC0
++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22
++#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21
++#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20
++#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16
++#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15
++#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14
++#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13
++#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12
++#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11
++#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10
++#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8
++#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5
++#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4
++#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2
++#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1
++#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0
++
++//U3D_B2_PHYD_MISC2
++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31
++#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27
++#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26
++#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25
++#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24
++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23
++#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22
++#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13
++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7
++#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1
++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0
++
++//U3D_B2_PHYD_MISC3
++#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16
++#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_0
++#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23
++#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16
++#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3
++#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2
++#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1
++#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0
++
++//U3D_B2_ROSC_1
++#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20
++#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19
++#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17
++#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16
++#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8
++#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0
++
++//U3D_B2_ROSC_2
++#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_3
++#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_4
++#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_5
++#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_6
++#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_7
++#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_8
++#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16
++#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2
++#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1
++#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0
++
++//U3D_B2_ROSC_9
++#define RGS_FM_RING_CNT (0xffff<<16) //31:16
++#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10
++#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9
++#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8
++#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0
++
++//U3D_B2_ROSC_A
++#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0
++
++//U3D_PHYD_VERSION
++#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MODEL
++#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0
++
++
++/* OFFSET */
++
++//U3D_B2_PHYD_TOP1
++#define RG_SSUSB_PCIE2_K_EMP_OFST (28)
++#define RG_SSUSB_PCIE2_K_FUL_OFST (24)
++#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17)
++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16)
++#define RG_SSUSB_SIGDET_EN_OFST (15)
++#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14)
++#define RG_SSUSB_CLKRX_EN_OFST (13)
++#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12)
++#define RG_SSUSB_CLKTX_EN_OFST (11)
++#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10)
++#define RG_SSUSB_CLK_REQ_N_I_OFST (9)
++#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8)
++#define RG_SSUSB_RATE_OFST (6)
++#define RG_SSUSB_FORCE_RATE_OFST (5)
++#define RG_SSUSB_PCIE_MODE_SEL_OFST (4)
++#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3)
++#define RG_SSUSB_PHY_MODE_OFST (1)
++#define RG_SSUSB_FORCE_PHY_MODE_OFST (0)
++
++//U3D_B2_PHYD_TOP2
++#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30)
++#define RG_SSUSB_IDRV_6DB_OFST (24)
++#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22)
++#define RG_SSUSB_IDEM_3P5DB_OFST (16)
++#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14)
++#define RG_SSUSB_IDRV_3P5DB_OFST (8)
++#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6)
++#define RG_SSUSB_IDRV_0DB_OFST (0)
++
++//U3D_B2_PHYD_TOP3
++#define RG_SSUSB_TX_BIASI_OFST (25)
++#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24)
++#define RG_SSUSB_TX_BIASI_EN_OFST (16)
++#define RG_SSUSB_FORCE_TX_BIASI_OFST (13)
++#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8)
++#define RG_SSUSB_IDEM_6DB_OFST (0)
++
++//U3D_B2_PHYD_TOP4
++#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28)
++#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24)
++#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16)
++#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8)
++#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0)
++
++//U3D_B2_PHYD_TOP5
++#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24)
++#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16)
++#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8)
++#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0)
++
++//U3D_B2_PHYD_TOP6
++#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28)
++#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24)
++#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16)
++#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8)
++#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0)
++
++//U3D_B2_PHYD_TOP7
++#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24)
++#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16)
++#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8)
++#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0)
++
++//U3D_B2_PHYD_P_SIGDET1
++#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31)
++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24)
++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16)
++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8)
++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0)
++
++//U3D_B2_PHYD_P_SIGDET2
++#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29)
++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28)
++#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27)
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25)
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24)
++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16)
++#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10)
++#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8)
++#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6)
++#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5)
++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4)
++#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2)
++#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0)
++
++//U3D_B2_PHYD_P_SIGDET_CAL1
++#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24)
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16)
++#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8)
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3)
++#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2)
++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1)
++#define RG_SSUSB_P_SIGDET_REK_OFST (0)
++
++//U3D_B2_PHYD_RXDET1
++#define RG_SSUSB_RXDET_PRB_SEL_OFST (31)
++#define RG_SSUSB_FORCE_CMDET_OFST (30)
++#define RG_SSUSB_RXDET_EN_OFST (29)
++#define RG_SSUSB_FORCE_RXDET_EN_OFST (28)
++#define RG_SSUSB_RXDET_K_TWICE_OFST (27)
++#define RG_SSUSB_RXDET_STB3_SET_OFST (18)
++#define RG_SSUSB_RXDET_STB2_SET_OFST (9)
++#define RG_SSUSB_RXDET_STB1_SET_OFST (0)
++
++//U3D_B2_PHYD_RXDET2
++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31)
++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30)
++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29)
++#define RG_SSUSB_PDN_T_SEL_OFST (18)
++#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9)
++#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0)
++
++//U3D_B2_PHYD_MISC0
++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22)
++#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21)
++#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20)
++#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16)
++#define RG_SSUSB_LFPS_PSEL_OFST (15)
++#define RG_SSUSB_RX_SIGDET_EN_OFST (14)
++#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13)
++#define RG_SSUSB_RX_PI_CAL_EN_OFST (12)
++#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11)
++#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10)
++#define RG_SSUSB_T2RLB_PSEL_OFST (8)
++#define RG_SSUSB_PPCTL_PSEL_OFST (5)
++#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4)
++#define RG_SSUSB_BERTLB_PSEL_OFST (2)
++#define RG_SSUSB_RETRACK_DIS_OFST (1)
++#define RG_SSUSB_PPERRCNT_CLR_OFST (0)
++
++//U3D_B2_PHYD_MISC2
++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31)
++#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27)
++#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26)
++#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25)
++#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24)
++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23)
++#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22)
++#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13)
++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7)
++#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1)
++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0)
++
++//U3D_B2_PHYD_MISC3
++#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16)
++#define RGS_SSUSB_PPERRCNT_OFST (0)
++
++//U3D_B2_ROSC_0
++#define RG_SSUSB_RING_OSC_CNTEND_OFST (23)
++#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16)
++#define RG_SSUSB_RING_OSC_EN_OFST (3)
++#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2)
++#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1)
++#define RG_SSUSB_RING_BYPASS_DET_OFST (0)
++
++//U3D_B2_ROSC_1
++#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20)
++#define RG_SSUSB_RING_OSC_P3_OFST (19)
++#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17)
++#define RG_SSUSB_RING_OSC_RECAL_OFST (16)
++#define RG_SSUSB_RING_OSC_SEL_OFST (8)
++#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0)
++
++//U3D_B2_ROSC_2
++#define RG_SSUSB_RING_DET_STRCYC2_OFST (16)
++#define RG_SSUSB_RING_DET_STRCYC1_OFST (0)
++
++//U3D_B2_ROSC_3
++#define RG_SSUSB_RING_DET_DETWIN1_OFST (16)
++#define RG_SSUSB_RING_DET_STRCYC3_OFST (0)
++
++//U3D_B2_ROSC_4
++#define RG_SSUSB_RING_DET_DETWIN3_OFST (16)
++#define RG_SSUSB_RING_DET_DETWIN2_OFST (0)
++
++//U3D_B2_ROSC_5
++#define RG_SSUSB_RING_DET_LBOND1_OFST (16)
++#define RG_SSUSB_RING_DET_UBOND1_OFST (0)
++
++//U3D_B2_ROSC_6
++#define RG_SSUSB_RING_DET_LBOND2_OFST (16)
++#define RG_SSUSB_RING_DET_UBOND2_OFST (0)
++
++//U3D_B2_ROSC_7
++#define RG_SSUSB_RING_DET_LBOND3_OFST (16)
++#define RG_SSUSB_RING_DET_UBOND3_OFST (0)
++
++//U3D_B2_ROSC_8
++#define RG_SSUSB_RING_RESERVE_OFST (16)
++#define RG_SSUSB_ROSC_PROB_SEL_OFST (2)
++#define RG_SSUSB_RING_FREQMETER_EN_OFST (1)
++#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0)
++
++//U3D_B2_ROSC_9
++#define RGS_FM_RING_CNT_OFST (16)
++#define RGS_SSUSB_RING_OSC_STATE_OFST (10)
++#define RGS_SSUSB_RING_OSC_STABLE_OFST (9)
++#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8)
++#define RGS_SSUSB_RING_OSC_CAL_OFST (0)
++
++//U3D_B2_ROSC_A
++#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0)
++
++//U3D_PHYD_VERSION
++#define RGS_SSUSB_PHYD_VERSION_OFST (0)
++
++//U3D_PHYD_MODEL
++#define RGS_SSUSB_PHYD_MODEL_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct sifslv_chip_reg {
++ PHY_LE32 xtalbias;
++ PHY_LE32 syspll1;
++ PHY_LE32 gpio_ctla;
++ PHY_LE32 gpio_ctlb;
++ PHY_LE32 gpio_ctlc;
++};
++
++//U3D_GPIO_CTLA
++#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0
++
++//U3D_GPIO_CTLB
++#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0
++
++//U3D_GPIO_CTLC
++#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0
++
++/* OFFSET */
++
++//U3D_GPIO_CTLA
++#define RG_C60802_GPIO_CTLA_OFST (0)
++
++//U3D_GPIO_CTLB
++#define RG_C60802_GPIO_CTLB_OFST (0)
++
++//U3D_GPIO_CTLC
++#define RG_C60802_GPIO_CTLC_OFST (0)
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct sifslv_fm_feg {
++ //0x0
++ PHY_LE32 fmcr0;
++ PHY_LE32 fmcr1;
++ PHY_LE32 fmcr2;
++ PHY_LE32 fmmonr0;
++ //0x10
++ PHY_LE32 fmmonr1;
++};
++
++//U3D_FMCR0
++#define RG_LOCKTH (0xf<<28) //31:28
++#define RG_MONCLK_SEL (0x3<<26) //27:26
++#define RG_FM_MODE (0x1<<25) //25:25
++#define RG_FREQDET_EN (0x1<<24) //24:24
++#define RG_CYCLECNT (0xffffff<<0) //23:0
++
++//U3D_FMCR1
++#define RG_TARGET (0xffffffff<<0) //31:0
++
++//U3D_FMCR2
++#define RG_OFFSET (0xffffffff<<0) //31:0
++
++//U3D_FMMONR0
++#define USB_FM_OUT (0xffffffff<<0) //31:0
++
++//U3D_FMMONR1
++#define RG_MONCLK_SEL_3 (0x1<<9) //9:9
++#define RG_FRCK_EN (0x1<<8) //8:8
++#define USBPLL_LOCK (0x1<<1) //1:1
++#define USB_FM_VLD (0x1<<0) //0:0
++
++
++/* OFFSET */
++
++//U3D_FMCR0
++#define RG_LOCKTH_OFST (28)
++#define RG_MONCLK_SEL_OFST (26)
++#define RG_FM_MODE_OFST (25)
++#define RG_FREQDET_EN_OFST (24)
++#define RG_CYCLECNT_OFST (0)
++
++//U3D_FMCR1
++#define RG_TARGET_OFST (0)
++
++//U3D_FMCR2
++#define RG_OFFSET_OFST (0)
++
++//U3D_FMMONR0
++#define USB_FM_OUT_OFST (0)
++
++//U3D_FMMONR1
++#define RG_MONCLK_SEL_3_OFST (9)
++#define RG_FRCK_EN_OFST (8)
++#define USBPLL_LOCK_OFST (1)
++#define USB_FM_VLD_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++PHY_INT32 phy_init(struct u3phy_info *info);
++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
++PHY_INT32 eyescan_init(struct u3phy_info *info);
++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
++PHY_INT32 u2_save_cur_en(struct u3phy_info *info);
++PHY_INT32 u2_save_cur_re(struct u3phy_info *info);
++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info);
++
++#endif
++#endif
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-ahb.c
+@@ -0,0 +1,58 @@
++#include "mtk-phy.h"
++#ifdef CONFIG_U3D_HAL_SUPPORT
++#include "mu3d_hal_osal.h"
++#endif
++
++#ifdef CONFIG_U3_PHY_AHB_SUPPORT
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++
++#ifndef CONFIG_U3D_HAL_SUPPORT
++#define os_writel(addr,data) {\
++ (*((volatile PHY_UINT32*)(addr)) = data);\
++ }
++#define os_readl(addr) *((volatile PHY_UINT32*)(addr))
++#define os_writelmsk(addr, data, msk) \
++ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
++ }
++#define os_setmsk(addr, msk) \
++ { os_writel(addr, os_readl(addr) | msk); \
++ }
++#define os_clrmsk(addr, msk) \
++ { os_writel(addr, os_readl(addr) &~ msk); \
++ }
++/*msk the data first, then umsk with the umsk.*/
++#define os_writelmskumsk(addr, data, msk, umsk) \
++{\
++ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
++}
++
++#endif
++
++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
++{
++ os_writel(addr, data);
++
++ return 0;
++}
++
++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
++{
++ return os_readl(addr);
++}
++
++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
++{
++ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
++
++ return 0;
++}
++
++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
++{
++ return ((os_readl(addr)>>((addr%4)*8))&0xff);
++}
++
++#endif
++
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy.c
+@@ -0,0 +1,102 @@
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#define U3_PHY_LIB
++#include "mtk-phy.h"
++#ifdef CONFIG_PROJECT_7621
++#include "mtk-phy-7621.h"
++#endif
++#ifdef CONFIG_PROJECT_PHY
++static struct u3phy_operator project_operators = {
++ .init = phy_init,
++ .change_pipe_phase = phy_change_pipe_phase,
++ .eyescan_init = eyescan_init,
++ .eyescan = phy_eyescan,
++ .u2_slew_rate_calibration = u2_slew_rate_calibration,
++};
++#endif
++
++
++PHY_INT32 u3phy_init(){
++#ifndef CONFIG_PROJECT_PHY
++ PHY_INT32 u3phy_version;
++#endif
++
++ if(u3phy != NULL){
++ return PHY_TRUE;
++ }
++
++ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
++#endif
++#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
++ u3phy->phyd_version_addr = 0x2000e4;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1->phyd_version_addr = 0x2000e4;
++#endif
++#else
++ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
++#endif
++#endif
++
++#ifdef CONFIG_PROJECT_PHY
++
++ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
++ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
++ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
++ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
++ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
++ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
++ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
++ u3phy_ops = &project_operators;
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
++ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
++ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
++ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
++ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
++ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
++ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
++#endif
++#endif
++
++ return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
++ PHY_INT8 cur_value;
++ PHY_INT8 new_value;
++
++ cur_value = U3PhyReadReg8(addr);
++ new_value = (cur_value & (~mask)) | (value << offset);
++ //udelay(i2cdelayus);
++ U3PhyWriteReg8(addr, new_value);
++ return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
++ PHY_INT32 cur_value;
++ PHY_INT32 new_value;
++
++ cur_value = U3PhyReadReg32(addr);
++ new_value = (cur_value & (~mask)) | ((value << offset) & mask);
++ U3PhyWriteReg32(addr, new_value);
++ //DRV_MDELAY(100);
++
++ return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
++
++ return ((U3PhyReadReg8(addr) & mask) >> offset);
++}
++
++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
++
++ return ((U3PhyReadReg32(addr) & mask) >> offset);
++}
++
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy.h
+@@ -0,0 +1,179 @@
++#ifndef __MTK_PHY_NEW_H
++#define __MTK_PHY_NEW_H
++
++//#define CONFIG_U3D_HAL_SUPPORT
++
++/* include system library */
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++/* Choose PHY R/W implementation */
++//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO
++#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC
++
++/* Choose PHY version */
++//Select your project by defining one of the followings
++#define CONFIG_PROJECT_7621 //7621
++#define CONFIG_PROJECT_PHY
++
++/* BASE ADDRESS DEFINE, should define this on ASIC */
++#define PHY_BASE 0xBE1D0000
++#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100)
++#define SIFSLV_CHIP_BASE (PHY_BASE+0x700)
++#define U2_PHY_BASE (PHY_BASE+0x800)
++#define U3_PHYD_BASE (PHY_BASE+0x900)
++#define U3_PHYD_B2_BASE (PHY_BASE+0xa00)
++#define U3_PHYA_BASE (PHY_BASE+0xb00)
++#define U3_PHYA_DA_BASE (PHY_BASE+0xc00)
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100)
++#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700)
++#define U2_PHY_BASE_P1 (PHY_BASE+0x1000)
++#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100)
++#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200)
++#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300)
++#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400)
++#endif
++
++/*
++
++0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg
++0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc
++0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28
++0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28
++0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28
++0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28
++0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28
++*/
++
++
++/* TYPE DEFINE */
++typedef unsigned int PHY_UINT32;
++typedef int PHY_INT32;
++typedef unsigned short PHY_UINT16;
++typedef short PHY_INT16;
++typedef unsigned char PHY_UINT8;
++typedef char PHY_INT8;
++
++typedef PHY_UINT32 __bitwise PHY_LE32;
++
++/* CONSTANT DEFINE */
++#define PHY_FALSE 0
++#define PHY_TRUE 1
++
++/* MACRO DEFINE */
++#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
++#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr))
++
++#define DRV_MDELAY mdelay
++#define DRV_MSLEEP msleep
++#define DRV_UDELAY udelay
++#define DRV_USLEEP usleep
++
++/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
++
++/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
++PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
++
++struct u3phy_info {
++ PHY_INT32 phy_version;
++ PHY_INT32 phyd_version_addr;
++
++#ifdef CONFIG_PROJECT_PHY
++ struct u2phy_reg *u2phy_regs;
++ struct u3phya_reg *u3phya_regs;
++ struct u3phya_da_reg *u3phya_da_regs;
++ struct u3phyd_reg *u3phyd_regs;
++ struct u3phyd_bank2_reg *u3phyd_bank2_regs;
++ struct sifslv_chip_reg *sifslv_chip_regs;
++ struct sifslv_fm_feg *sifslv_fm_regs;
++#endif
++};
++
++struct u3phy_operator {
++ PHY_INT32 (*init) (struct u3phy_info *info);
++ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
++ PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
++ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
++ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
++ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
++ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
++};
++
++#ifdef U3_PHY_LIB
++#define AUTOEXT
++#else
++#define AUTOEXT extern
++#endif
++
++AUTOEXT struct u3phy_info *u3phy;
++AUTOEXT struct u3phy_info *u3phy_p1;
++AUTOEXT struct u3phy_operator *u3phy_ops;
++
++/*********eye scan required*********/
++
++#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF))
++#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8))
++
++typedef enum
++{
++ SCAN_UP,
++ SCAN_DN
++} enumScanDir;
++
++struct strucScanRegion
++{
++ PHY_INT8 bX_tl;
++ PHY_INT8 bY_tl;
++ PHY_INT8 bX_br;
++ PHY_INT8 bY_br;
++ PHY_INT8 bDeltaX;
++ PHY_INT8 bDeltaY;
++};
++
++struct strucTestCycle
++{
++ PHY_UINT16 wEyeCnt;
++ PHY_INT8 bNumOfEyeCnt;
++ PHY_INT8 bPICalEn;
++ PHY_INT8 bNumOfIgnoreCnt;
++};
++
++#define ERRCNT_MAX 128
++#define CYCLE_COUNT_MAX 15
++
++/// the map resolution is 128 x 128 pts
++#define MAX_X 127
++#define MAX_Y 127
++#define MIN_X 0
++#define MIN_Y 0
++
++PHY_INT32 u3phy_init(void);
++
++AUTOEXT struct strucScanRegion _rEye1;
++AUTOEXT struct strucScanRegion _rEye2;
++AUTOEXT struct strucTestCycle _rTestCycle;
++AUTOEXT PHY_UINT8 _bXcurr;
++AUTOEXT PHY_UINT8 _bYcurr;
++AUTOEXT enumScanDir _eScanDir;
++AUTOEXT PHY_INT8 _fgXChged;
++AUTOEXT PHY_INT8 _bPIResult;
++/* use local variable instead to save memory use */
++#if 0
++AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++#endif
++
++/***********************************/
++#endif
++
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
+@@ -27,7 +27,10 @@
+ #include <linux/reset.h>
+ #include <linux/usb/ohci_pdriver.h>
+ #include <linux/usb.h>
++#include <linux/usb/phy.h>
+ #include <linux/usb/hcd.h>
++#include <linux/dma-mapping.h>
++#include <linux/of.h>
+
+ #include "ohci.h"
+
+@@ -41,6 +44,7 @@ struct ohci_platform_priv {
+ struct phy *phy;
+ };
+
++static struct usb_ohci_pdata ohci_platform_defaults;
+ static const char hcd_name[] = "ohci-platform";
+
+ static int ohci_platform_reset(struct usb_hcd *hcd)
+@@ -239,6 +243,12 @@ static int ohci_platform_probe(struct platform_device *dev)
+ hcd->rsrc_start = res_mem->start;
+ hcd->rsrc_len = resource_size(res_mem);
+
++#ifdef CONFIG_USB_PHY
++ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++ if (!IS_ERR_OR_NULL(hcd->phy))
++ usb_phy_init(hcd->phy);
++#endif
++
+ hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ if (IS_ERR(hcd->regs)) {
+ err = PTR_ERR(hcd->regs);
+--- a/drivers/usb/host/pci-quirks.h
++++ b/drivers/usb/host/pci-quirks.h
+@@ -1,7 +1,7 @@
+ #ifndef __LINUX_USB_PCI_QUIRKS_H
+ #define __LINUX_USB_PCI_QUIRKS_H
+
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+ #endif /* CONFIG_PCI */
+--- a/drivers/usb/host/xhci-dbg.c
++++ b/drivers/usb/host/xhci-dbg.c
+@@ -21,6 +21,9 @@
+ */
+
+ #include "xhci.h"
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include "xhci-mtk.h"
++#endif
+
+ #define XHCI_INIT_VALUE 0x0
+
+--- a/drivers/usb/host/xhci-mem.c
++++ b/drivers/usb/host/xhci-mem.c
+@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
+
+ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+ {
++ if (!seg)
++ return;
++
+ if (seg->trbs) {
+ dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+ seg->trbs = NULL;
+@@ -1475,9 +1478,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
+ max_burst = (usb_endpoint_maxp(&ep->desc)
+ & 0x1800) >> 11;
+ }
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++ max_packet += 2;
++#endif
+ break;
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++ max_packet += 2;
++#endif
+ break;
+ default:
+ BUG();
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-power.c
+@@ -0,0 +1,115 @@
++#include "xhci-mtk.h"
++#include "xhci-mtk-power.h"
++#include "xhci.h"
++#include <linux/kernel.h> /* printk() */
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++static int g_num_u3_port;
++static int g_num_u2_port;
++
++
++void enableXhciAllPortPower(struct xhci_hcd *xhci){
++ int i;
++ u32 port_id, temp;
++ u32 __iomem *addr;
++
++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++
++ for(i=1; i<=g_num_u3_port; i++){
++ port_id=i;
++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
++ temp = readl(addr);
++ temp = xhci_port_state_to_neutral(temp);
++ temp |= PORT_POWER;
++ writel(temp, addr);
++ }
++ for(i=1; i<=g_num_u2_port; i++){
++ port_id=i+g_num_u3_port;
++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
++ temp = readl(addr);
++ temp = xhci_port_state_to_neutral(temp);
++ temp |= PORT_POWER;
++ writel(temp, addr);
++ }
++}
++
++void enableAllClockPower(){
++
++ int i;
++ u32 temp;
++
++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++
++ //2. Enable xHC
++ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
++ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++
++ //1. Enable target ports
++ for(i=0; i<g_num_u3_port; i++){
++ temp = readl(SSUSB_U3_CTRL(i));
++ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
++ writel(temp, SSUSB_U3_CTRL(i));
++ }
++ for(i=0; i<g_num_u2_port; i++){
++ temp = readl(SSUSB_U2_CTRL(i));
++ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
++ writel(temp, SSUSB_U2_CTRL(i));
++ }
++ msleep(100);
++}
++
++
++//(X)disable clock/power of a port
++//(X)if all ports are disabled, disable IP ctrl power
++//disable all ports and IP clock/power, this is just mention HW that the power/clock of port
++//and IP could be disable if suspended.
++//If doesn't not disable all ports at first, the IP clock/power will never be disabled
++//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
++//port_index: port number
++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
++void disablePortClockPower(void){
++ int i;
++ u32 temp;
++
++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++
++ for(i=0; i<g_num_u3_port; i++){
++ temp = readl(SSUSB_U3_CTRL(i));
++ temp = temp | (SSUSB_U3_PORT_PDN);
++ writel(temp, SSUSB_U3_CTRL(i));
++ }
++ for(i=0; i<g_num_u2_port; i++){
++ temp = readl(SSUSB_U2_CTRL(i));
++ temp = temp | (SSUSB_U2_PORT_PDN);
++ writel(temp, SSUSB_U2_CTRL(i));
++ }
++ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++}
++
++//if IP ctrl power is disabled, enable it
++//enable clock/power of a port
++//port_index: port number
++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
++void enablePortClockPower(int port_index, int port_rev){
++ int i;
++ u32 temp;
++
++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++
++ if(port_rev == 0x3){
++ temp = readl(SSUSB_U3_CTRL(port_index));
++ temp = temp & (~SSUSB_U3_PORT_PDN);
++ writel(temp, SSUSB_U3_CTRL(port_index));
++ }
++ else if(port_rev == 0x2){
++ temp = readl(SSUSB_U2_CTRL(port_index));
++ temp = temp & (~SSUSB_U2_PORT_PDN);
++ writel(temp, SSUSB_U2_CTRL(port_index));
++ }
++}
++
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-power.h
+@@ -0,0 +1,13 @@
++#ifndef _XHCI_MTK_POWER_H
++#define _XHCI_MTK_POWER_H
++
++#include <linux/usb.h>
++#include "xhci.h"
++#include "xhci-mtk.h"
++
++void enableXhciAllPortPower(struct xhci_hcd *xhci);
++void enableAllClockPower(void);
++void disablePortClockPower(void);
++void enablePortClockPower(int port_index, int port_rev);
++
++#endif
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-scheduler.c
+@@ -0,0 +1,608 @@
++#include "xhci-mtk-scheduler.h"
++#include <linux/kernel.h> /* printk() */
++
++static struct sch_ep **ss_out_eps[MAX_EP_NUM];
++static struct sch_ep **ss_in_eps[MAX_EP_NUM];
++static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc
++static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
++
++
++int mtk_xhci_scheduler_init(void){
++ int i;
++
++ for(i=0; i<MAX_EP_NUM; i++){
++ ss_out_eps[i] = NULL;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ ss_in_eps[i] = NULL;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ hs_eps[i] = NULL;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ tt_intr_eps[i] = NULL;
++ }
++ return 0;
++}
++
++int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
++ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
++
++ struct sch_ep **ep_array;
++ int i;
++
++ if(is_in && dev_speed == USB_SPEED_SUPER ){
++ ep_array = (struct sch_ep **)ss_in_eps;
++ }
++ else if(dev_speed == USB_SPEED_SUPER){
++ ep_array = (struct sch_ep **)ss_out_eps;
++ }
++ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
++ ep_array = (struct sch_ep **)hs_eps;
++ }
++ else{
++ ep_array = (struct sch_ep **)tt_intr_eps;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ if(ep_array[i] == NULL){
++ tmp_ep->dev_speed = dev_speed;
++ tmp_ep->isTT = isTT;
++ tmp_ep->is_in = is_in;
++ tmp_ep->ep_type = ep_type;
++ tmp_ep->maxp = maxp;
++ tmp_ep->interval = interval;
++ tmp_ep->burst = burst;
++ tmp_ep->mult = mult;
++ tmp_ep->offset = offset;
++ tmp_ep->repeat = repeat;
++ tmp_ep->pkts = pkts;
++ tmp_ep->cs_count = cs_count;
++ tmp_ep->burst_mode = burst_mode;
++ tmp_ep->bw_cost = bw_cost;
++ tmp_ep->ep = ep;
++ ep_array[i] = tmp_ep;
++ return SCH_SUCCESS;
++ }
++ }
++ return SCH_FAIL;
++}
++
++int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
++ , int td_size){
++ int i, j, k;
++ int bw_required[3];
++ int final_bw_required;
++ int bw_required_per_repeat;
++ int tmp_bw_required;
++ struct sch_ep *cur_sch_ep;
++ struct sch_ep **ep_array;
++ int cur_offset;
++ int cur_ep_offset;
++ int tmp_offset;
++ int tmp_interval;
++ int ep_offset;
++ int ep_interval;
++ int ep_repeat;
++ int ep_mult;
++
++ if(is_in){
++ ep_array = (struct sch_ep **)ss_in_eps;
++ }
++ else{
++ ep_array = (struct sch_ep **)ss_out_eps;
++ }
++
++ bw_required[0] = 0;
++ bw_required[1] = 0;
++ bw_required[2] = 0;
++
++ if(repeat == 0){
++ final_bw_required = 0;
++ for(i=0; i<MAX_EP_NUM; i++){
++ cur_sch_ep = ep_array[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_interval = cur_sch_ep->interval;
++ ep_offset = cur_sch_ep->offset;
++ if(cur_sch_ep->repeat == 0){
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ final_bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ else{
++ ep_repeat = cur_sch_ep->repeat;
++ ep_mult = cur_sch_ep->mult;
++ for(k=0; k<=ep_mult; k++){
++ cur_ep_offset = ep_offset+(k*ep_mult);
++ if(ep_interval >= interval){
++ tmp_offset = cur_ep_offset + ep_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - cur_ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ final_bw_required += cur_sch_ep->bw_cost;
++ break;
++ }
++ }
++ }
++ }
++ final_bw_required += td_size;
++ }
++ else{
++ bw_required_per_repeat = maxp * (burst+1);
++ for(j=0; j<=mult; j++){
++ tmp_bw_required = 0;
++ cur_offset = offset+(j*repeat);
++ for(i=0; i<MAX_EP_NUM; i++){
++ cur_sch_ep = ep_array[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_interval = cur_sch_ep->interval;
++ ep_offset = cur_sch_ep->offset;
++ if(cur_sch_ep->repeat == 0){
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - cur_offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = cur_offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ tmp_bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ else{
++ ep_repeat = cur_sch_ep->repeat;
++ ep_mult = cur_sch_ep->mult;
++ for(k=0; k<=ep_mult; k++){
++ cur_ep_offset = ep_offset+(k*ep_repeat);
++ if(ep_interval >= interval){
++ tmp_offset = cur_ep_offset + ep_interval - cur_offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = cur_offset + interval - cur_ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ tmp_bw_required += cur_sch_ep->bw_cost;
++ break;
++ }
++ }
++ }
++ }
++ bw_required[j] = tmp_bw_required;
++ }
++ final_bw_required = SS_BW_BOUND;
++ for(j=0; j<=mult; j++){
++ if(bw_required[j] < final_bw_required){
++ final_bw_required = bw_required[j];
++ }
++ }
++ final_bw_required += bw_required_per_repeat;
++ }
++ return final_bw_required;
++}
++
++int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
++ int i;
++ int bw_required;
++ struct sch_ep *cur_sch_ep;
++ int tmp_offset;
++ int tmp_interval;
++ int ep_offset;
++ int ep_interval;
++ int cur_tt_isoc_interval; //for isoc tt check
++
++ bw_required = 0;
++ for(i=0; i<MAX_EP_NUM; i++){
++
++ cur_sch_ep = (struct sch_ep *)hs_eps[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_offset = cur_sch_ep->offset;
++ ep_interval = cur_sch_ep->interval;
++
++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
++ cur_tt_isoc_interval = ep_interval<<3;
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - ep_offset;
++ tmp_interval = cur_tt_isoc_interval;
++ }
++ if(cur_sch_ep->is_in){
++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
++ bw_required += 188;
++ }
++ }
++ else{
++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
++ bw_required += 188;
++ }
++ }
++ }
++ else{
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset%tmp_interval == 0){
++ bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ }
++ bw_required += td_size;
++ return bw_required;
++}
++
++int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
++ char is_cs;
++ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
++ int bw_required, max_bw;
++ int ss_cs_count;
++ int cs_mframe;
++ int max_frame;
++ int i,j;
++ struct sch_ep *cur_sch_ep;
++ int ep_offset;
++ int ep_interval;
++ int ep_cs_count;
++ int tt_isoc_interval; //for isoc tt check
++ int cur_tt_isoc_interval; //for isoc tt check
++ int tmp_offset;
++ int tmp_interval;
++
++ is_cs = 0;
++
++ tt_isoc_interval = interval<<3; //frame to mframe
++ if(is_in){
++ is_cs = 1;
++ }
++ s_frame = offset/8;
++ s_mframe = offset%8;
++ ss_cs_count = (maxp + (188 - 1))/188;
++ if(is_cs){
++ cs_mframe = offset%8 + 2 + ss_cs_count;
++ if (cs_mframe <= 6)
++ ss_cs_count += 2;
++ else if (cs_mframe == 7)
++ ss_cs_count++;
++ else if (cs_mframe > 8)
++ return -1;
++ }
++ max_bw = 0;
++ if(is_in){
++ i=2;
++ }
++ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
++ bw_required = 0;
++ for(j=0; j<MAX_EP_NUM; j++){
++ cur_sch_ep = (struct sch_ep *)hs_eps[j];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_offset = cur_sch_ep->offset;
++ ep_interval = cur_sch_ep->interval;
++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
++ //isoc tt
++ //check if mframe offset overlap
++ //if overlap, add 188 to the bw
++ cur_tt_isoc_interval = ep_interval<<3;
++ if(cur_tt_isoc_interval >= tt_isoc_interval){
++ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe;
++ tmp_interval = tt_isoc_interval;
++ }
++ else{
++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
++ tmp_interval = cur_tt_isoc_interval;
++ }
++ if(cur_sch_ep->is_in){
++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
++ bw_required += 188;
++ }
++ }
++ else{
++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
++ bw_required += 188;
++ }
++ }
++
++ }
++ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
++ //check if mframe
++ if(ep_interval >= tt_isoc_interval){
++ tmp_offset = (ep_offset+ep_interval) - cur_mframe;
++ tmp_interval = tt_isoc_interval;
++ }
++ else{
++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset%tmp_interval == 0){
++ bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ }
++ bw_required += 188;
++ if(bw_required > max_bw){
++ max_bw = bw_required;
++ }
++ }
++ return max_bw;
++}
++
++int count_tt_intr_bw(int interval, int frame_offset){
++ //check all eps in tt_intr_eps
++ int ret;
++ int i,j;
++ int ep_offset;
++ int ep_interval;
++ int tmp_offset;
++ int tmp_interval;
++ ret = SCH_SUCCESS;
++ struct sch_ep *cur_sch_ep;
++
++ for(i=0; i<MAX_EP_NUM; i++){
++ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_offset = cur_sch_ep->offset;
++ ep_interval = cur_sch_ep->interval;
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - frame_offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = frame_offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++
++ if(tmp_offset%tmp_interval==0){
++ return SCH_FAIL;
++ }
++ }
++ return SCH_SUCCESS;
++}
++
++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
++ int i;
++ struct sch_ep **ep_array;
++ struct sch_ep *cur_ep;
++
++ if (is_in && dev_speed == USB_SPEED_SUPER) {
++ ep_array = (struct sch_ep **)ss_in_eps;
++ }
++ else if (dev_speed == USB_SPEED_SUPER) {
++ ep_array = (struct sch_ep **)ss_out_eps;
++ }
++ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
++ ep_array = (struct sch_ep **)hs_eps;
++ }
++ else {
++ ep_array = (struct sch_ep **)tt_intr_eps;
++ }
++ for (i = 0; i < MAX_EP_NUM; i++) {
++ cur_ep = (struct sch_ep *)ep_array[i];
++ if(cur_ep != NULL && cur_ep->ep == ep){
++ ep_array[i] = NULL;
++ return cur_ep;
++ }
++ }
++ return NULL;
++}
++
++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
++ mtk_u32 bPkts = 0;
++ mtk_u32 bCsCount = 0;
++ mtk_u32 bBm = 1;
++ mtk_u32 bOffset = 0;
++ mtk_u32 bRepeat = 0;
++ int ret;
++ struct mtk_xhci_ep_ctx *temp_ep_ctx;
++ int td_size;
++ int mframe_idx, frame_idx;
++ int bw_cost;
++ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
++ int cur_offset, cs_mframe;
++ int break_out;
++ int frame_interval;
++
++ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
++ , interval, burst, mult, ep, ep_ctx, sch_ep);
++ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
++ frame_interval = interval >> 3;
++ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
++ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
++ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
++ printk(KERN_ERR "check OK............\n");
++ bOffset = frame_idx<<3;
++ bPkts = 1;
++ bCsCount = 3;
++ bw_cost = maxp;
++ bRepeat = 0;
++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ break;
++ }
++ }
++ }
++ else if(isTT && ep_type == USB_EP_ISOC){
++ best_bw = HS_BW_BOUND;
++ best_bw_idx = -1;
++ cur_bw = 0;
++ td_size = maxp;
++ break_out = 0;
++ frame_interval = interval>>3;
++ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
++ for(mframe_idx=0; mframe_idx<8; mframe_idx++){
++ cur_offset = (frame_idx*8) + mframe_idx;
++ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
++ if(cur_bw > 0 && cur_bw < best_bw){
++ best_bw_idx = cur_offset;
++ best_bw = cur_bw;
++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
++ break_out = 1;
++ break;
++ }
++ }
++ }
++ }
++ if(best_bw_idx == -1){
++ return SCH_FAIL;
++ }
++ else{
++ bOffset = best_bw_idx;
++ bPkts = 1;
++ bCsCount = (maxp + (188 - 1)) / 188;
++ if(is_in){
++ cs_mframe = bOffset%8 + 2 + bCsCount;
++ if (cs_mframe <= 6)
++ bCsCount += 2;
++ else if (cs_mframe == 7)
++ bCsCount++;
++ }
++ bw_cost = 188;
++ bRepeat = 0;
++ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ }
++ }
++ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
++ bPkts = 1;
++ ret = SCH_SUCCESS;
++ }
++ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
++ bPkts = 1;
++ ret = SCH_SUCCESS;
++ }
++ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
++ best_bw = HS_BW_BOUND;
++ best_bw_idx = -1;
++ cur_bw = 0;
++ td_size = maxp*(burst+1);
++ for(cur_offset = 0; cur_offset<interval; cur_offset++){
++ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
++ if(cur_bw > 0 && cur_bw < best_bw){
++ best_bw_idx = cur_offset;
++ best_bw = cur_bw;
++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
++ break;
++ }
++ }
++ }
++ if(best_bw_idx == -1){
++ return SCH_FAIL;
++ }
++ else{
++ bOffset = best_bw_idx;
++ bPkts = burst + 1;
++ bCsCount = 0;
++ bw_cost = td_size;
++ bRepeat = 0;
++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ }
++ }
++ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
++ best_bw = SS_BW_BOUND;
++ best_bw_idx = -1;
++ cur_bw = 0;
++ td_size = maxp * (mult+1) * (burst+1);
++ if(mult == 0){
++ max_repeat = 0;
++ }
++ else{
++ max_repeat = (interval-1)/(mult+1);
++ }
++ break_out = 0;
++ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
++ for(repeat = max_repeat; repeat >= 0; repeat--){
++ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
++ , repeat, td_size);
++ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
++ , frame_idx, repeat, td_size, cur_bw);
++ if(cur_bw > 0 && cur_bw < best_bw){
++ best_bw_idx = frame_idx;
++ best_bw_repeat = repeat;
++ best_bw = cur_bw;
++ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
++ break_out = 1;
++ break;
++ }
++ }
++ }
++ }
++ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
++ if(best_bw_idx == -1){
++ return SCH_FAIL;
++ }
++ else{
++ bOffset = best_bw_idx;
++ bCsCount = 0;
++ bRepeat = best_bw_repeat;
++ if(bRepeat == 0){
++ bw_cost = (burst+1)*(mult+1)*maxp;
++ bPkts = (burst+1)*(mult+1);
++ }
++ else{
++ bw_cost = (burst+1)*maxp;
++ bPkts = (burst+1);
++ }
++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ }
++ }
++ else{
++ bPkts = 1;
++ ret = SCH_SUCCESS;
++ }
++ if(ret == SCH_SUCCESS){
++ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
++ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
++ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
++
++ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
++ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
++ return SCH_SUCCESS;
++ }
++ else{
++ return SCH_FAIL;
++ }
++}
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-scheduler.h
+@@ -0,0 +1,77 @@
++#ifndef _XHCI_MTK_SCHEDULER_H
++#define _XHCI_MTK_SCHEDULER_H
++
++#define MTK_SCH_NEW 1
++
++#define SCH_SUCCESS 1
++#define SCH_FAIL 0
++
++#define MAX_EP_NUM 64
++#define SS_BW_BOUND 51000
++#define HS_BW_BOUND 6144
++
++#define USB_EP_CONTROL 0
++#define USB_EP_ISOC 1
++#define USB_EP_BULK 2
++#define USB_EP_INT 3
++
++#define USB_SPEED_LOW 1
++#define USB_SPEED_FULL 2
++#define USB_SPEED_HIGH 3
++#define USB_SPEED_SUPER 5
++
++/* mtk scheduler bitmasks */
++#define BPKTS(p) ((p) & 0x3f)
++#define BCSCOUNT(p) (((p) & 0x7) << 8)
++#define BBM(p) ((p) << 11)
++#define BOFFSET(p) ((p) & 0x3fff)
++#define BREPEAT(p) (((p) & 0x7fff) << 16)
++
++
++#if 1
++typedef unsigned int mtk_u32;
++typedef unsigned long long mtk_u64;
++#endif
++
++#define NULL ((void *)0)
++
++struct mtk_xhci_ep_ctx {
++ mtk_u32 ep_info;
++ mtk_u32 ep_info2;
++ mtk_u64 deq;
++ mtk_u32 tx_info;
++ /* offset 0x14 - 0x1f reserved for HC internal use */
++ mtk_u32 reserved[3];
++};
++
++
++struct sch_ep
++{
++ //device info
++ int dev_speed;
++ int isTT;
++ //ep info
++ int is_in;
++ int ep_type;
++ int maxp;
++ int interval;
++ int burst;
++ int mult;
++ //scheduling info
++ int offset;
++ int repeat;
++ int pkts;
++ int cs_count;
++ int burst_mode;
++ //other
++ int bw_cost; //bandwidth cost in each repeat; including overhead
++ mtk_u32 *ep; //address of usb_endpoint pointer
++};
++
++int mtk_xhci_scheduler_init(void);
++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
++
++
++#endif
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.c
+@@ -0,0 +1,265 @@
++#include "xhci-mtk.h"
++#include "xhci-mtk-power.h"
++#include "xhci.h"
++#include "mtk-phy.h"
++#ifdef CONFIG_C60802_SUPPORT
++#include "mtk-phy-c60802.h"
++#endif
++#include "xhci-mtk-scheduler.h"
++#include <linux/kernel.h> /* printk() */
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++
++void setInitialReg(void )
++{
++ __u32 __iomem *addr;
++ u32 temp;
++
++ /* set SSUSB DMA burst size to 128B */
++ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
++ temp = SSUSB_HDMA_CFG_MT7621_VALUE;
++ writel(temp, addr);
++
++ /* extend U3 LTSSM Polling.LFPS timeout value */
++ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
++ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
++ writel(temp, addr);
++
++ /* EOF */
++ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
++ temp = SYNC_HS_EOF_VALUE;
++ writel(temp, addr);
++
++#if defined (CONFIG_PERIODIC_ENP)
++ /* HSCH_CFG1: SCH2_FIFO_DEPTH */
++ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
++ temp = readl(addr);
++ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
++ writel(temp, addr);
++#endif
++
++ /* Doorbell handling */
++ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
++ temp = 0x1;
++ writel(temp, addr);
++
++ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
++ /* Port 0 */
++ addr = U2_PHY_BASE + U2_PHYD_CR1;
++ temp = readl(addr);
++ temp &= ~(0x3 << 18);
++ temp |= (1 << 18);
++ writel(temp, addr);
++
++ /* Port 1 */
++ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
++ temp = readl(addr);
++ temp &= ~(0x3 << 18);
++ temp |= (1 << 18);
++ writel(temp, addr);
++}
++
++
++void setLatchSel(void){
++ __u32 __iomem *latch_sel_addr;
++ u32 latch_sel_value;
++ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
++ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
++ writel(latch_sel_value, latch_sel_addr);
++}
++
++void reinitIP(void){
++ __u32 __iomem *ip_reset_addr;
++ u32 ip_reset_value;
++
++ enableAllClockPower();
++ mtk_xhci_scheduler_init();
++}
++
++void dbg_prb_out(void){
++ mtk_probe_init(0x0f0f0f0f);
++ mtk_probe_out(0xffffffff);
++ mtk_probe_out(0x01010101);
++ mtk_probe_out(0x02020202);
++ mtk_probe_out(0x04040404);
++ mtk_probe_out(0x08080808);
++ mtk_probe_out(0x10101010);
++ mtk_probe_out(0x20202020);
++ mtk_probe_out(0x40404040);
++ mtk_probe_out(0x80808080);
++ mtk_probe_out(0x55555555);
++ mtk_probe_out(0xaaaaaaaa);
++}
++
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++#define RET_SUCCESS 0
++#define RET_FAIL 1
++
++static int dbg_u3w(int argc, char**argv)
++{
++ int u4TimingValue;
++ char u1TimingValue;
++ int u4TimingAddress;
++
++ if (argc<3)
++ {
++ printk(KERN_ERR "Arg: address value\n");
++ return RET_FAIL;
++ }
++ u3phy_init();
++
++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
++ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
++ u1TimingValue = u4TimingValue & 0xff;
++ /* access MMIO directly */
++ writel(u1TimingValue, u4TimingAddress);
++ printk(KERN_ERR "Write done\n");
++ return RET_SUCCESS;
++
++}
++
++static int dbg_u3r(int argc, char**argv)
++{
++ char u1ReadTimingValue;
++ int u4TimingAddress;
++ if (argc<2)
++ {
++ printk(KERN_ERR "Arg: address\n");
++ return 0;
++ }
++ u3phy_init();
++ mdelay(500);
++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
++ /* access MMIO directly */
++ u1ReadTimingValue = readl(u4TimingAddress);
++ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
++ return 0;
++}
++
++static int dbg_u3init(int argc, char**argv)
++{
++ int ret;
++ ret = u3phy_init();
++ printk(KERN_ERR "phy registers and operations initial done\n");
++ if(u3phy_ops->u2_slew_rate_calibration){
++ u3phy_ops->u2_slew_rate_calibration(u3phy);
++ }
++ else{
++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
++ }
++ if(u3phy_ops->init(u3phy) == PHY_TRUE)
++ return RET_SUCCESS;
++ return RET_FAIL;
++}
++
++void dbg_setU1U2(int argc, char**argv){
++ struct xhci_hcd *xhci;
++ int u1_value;
++ int u2_value;
++ u32 port_id, temp;
++ u32 __iomem *addr;
++
++ if (argc<3)
++ {
++ printk(KERN_ERR "Arg: u1value u2value\n");
++ return RET_FAIL;
++ }
++
++ u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
++ u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
++ addr = (SSUSB_U3_XHCI_BASE + 0x424);
++ temp = readl(addr);
++ temp = temp & (~(0x0000ffff));
++ temp = temp | u1_value | (u2_value<<8);
++ writel(temp, addr);
++}
++///////////////////////////////////////////////////////////////////////////////
++
++int call_function(char *buf)
++{
++ int i;
++ int argc;
++ char *argv[80];
++
++ argc = 0;
++ do
++ {
++ argv[argc] = strsep(&buf, " ");
++ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
++ argc++;
++ } while (buf);
++ if (!strcmp("dbg.r", argv[0]))
++ dbg_prb_out();
++ else if (!strcmp("dbg.u3w", argv[0]))
++ dbg_u3w(argc, argv);
++ else if (!strcmp("dbg.u3r", argv[0]))
++ dbg_u3r(argc, argv);
++ else if (!strcmp("dbg.u3i", argv[0]))
++ dbg_u3init(argc, argv);
++ else if (!strcmp("pw.u1u2", argv[0]))
++ dbg_setU1U2(argc, argv);
++ return 0;
++}
++
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++ char w_buf[200];
++ char r_buf[200] = "this is a test";
++ int len = 200;
++
++ switch (cmd) {
++ case IOCTL_READ:
++ copy_to_user((char *) arg, r_buf, len);
++ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
++ break;
++ case IOCTL_WRITE:
++ copy_from_user(w_buf, (char *) arg, len);
++ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
++
++ //invoke function
++ return call_function(w_buf);
++ break;
++ default:
++ return -ENOTTY;
++ }
++
++ return len;
++}
++
++int xhci_mtk_test_open(struct inode *inode, struct file *file)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
++ return 0;
++}
++
++int xhci_mtk_test_release(struct inode *inode, struct file *file)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
++ return 0;
++}
++
++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
++ return 0;
++}
++
++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
++ return 0;
++}
++
++
++
++
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.h
+@@ -0,0 +1,120 @@
++#ifndef _XHCI_MTK_H
++#define _XHCI_MTK_H
++
++#include <linux/usb.h>
++#include "xhci.h"
++
++#define SSUSB_U3_XHCI_BASE 0xBE1C0000
++#define SSUSB_U3_MAC_BASE 0xBE1C2400
++#define SSUSB_U3_SYS_BASE 0xBE1C2600
++#define SSUSB_U2_SYS_BASE 0xBE1C3400
++#define SSUB_SIF_SLV_TOP 0xBE1D0000
++#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700)
++
++#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130
++#define U3_PIPE_LATCH_TX 0
++#define U3_PIPE_LATCH_RX 0
++
++#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0
++#define U3_REF_CK_PAR 0xb0
++#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8
++#define U3_RX_UX_EXIT_LFPS_REF 3
++#define U3_REF_CK_VAL 10
++
++#define U3_TIMING_PULSE_CTRL 0xb4
++#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
++
++#define USB20_TIMING_PARAMETER 0x40
++#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
++
++#define LINK_PM_TIMER 0x8
++#define PM_LC_TIMEOUT_VALUE 3
++
++#define XHCI_IMOD 0x624
++#define XHCI_IMOD_MT7621_VALUE 0x10
++
++#define SSUSB_HDMA_CFG 0x950
++#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C
++
++#define U3_LTSSM_TIMING_PARAMETER3 0x2514
++#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C
++
++#define U2_PHYD_CR1 0x64
++
++#define SSUSB_IP_SPAR0 0xC8
++
++#define SYNC_HS_EOF 0x938
++#define SYNC_HS_EOF_VALUE 0x201F3
++
++#define HSCH_CFG1 0x960
++#define SCH2_FIFO_DEPTH_OFFSET 16
++
++
++#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0)
++#define SSUSB_IP_SW_RST (1<<0)
++#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4)
++#define SSUSB_IP_PDN (1<<0)
++#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08))
++#define SSUSB_U3_PORT_DIS (1<<0)
++#define SSUSB_U3_PORT_PDN (1<<1)
++#define SSUSB_U3_PORT_HOST_SEL (1<<2)
++#define SSUSB_U3_PORT_CKBG_EN (1<<3)
++#define SSUSB_U3_PORT_MAC_RST (1<<4)
++#define SSUSB_U3_PORT_PHYD_RST (1<<5)
++#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08))
++#define SSUSB_U2_PORT_DIS (1<<0)
++#define SSUSB_U2_PORT_PDN (1<<1)
++#define SSUSB_U2_PORT_HOST_SEL (1<<2)
++#define SSUSB_U2_PORT_CKBG_EN (1<<3)
++#define SSUSB_U2_PORT_MAC_RST (1<<4)
++#define SSUSB_U2_PORT_PHYD_RST (1<<5)
++#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024)
++
++#define SSUSB_U3_PORT_NUM(p) (p & 0xff)
++#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff)
++
++
++#define XHCI_MTK_TEST_MAJOR 234
++#define DEVICE_NAME "xhci_mtk_test"
++
++#define CLI_MAGIC 'CLI'
++#define IOCTL_READ _IOR(CLI_MAGIC, 0, int)
++#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int)
++
++void reinitIP(void);
++void setInitialReg(void);
++void dbg_prb_out(void);
++int call_function(char *buf);
++
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
++int xhci_mtk_test_open(struct inode *inode, struct file *file);
++int xhci_mtk_test_release(struct inode *inode, struct file *file);
++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
++
++/*
++ mediatek probe out
++*/
++/************************************************************************************/
++
++#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0)
++#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc)
++
++static inline void mtk_probe_init(const u32 byte){
++ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
++ writel(byte, ptr);
++}
++
++static inline void mtk_probe_out(const u32 value){
++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
++ writel(value, ptr);
++}
++
++static inline u32 mtk_probe_value(void){
++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
++
++ return readl(ptr);
++}
++
++
++#endif
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -33,6 +33,13 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+ * dev struct in order to setup MSI
+ */
+ xhci->quirks |= XHCI_PLAT;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ /* MTK host controller gives a spurious successful event after a
++ * short transfer. Ignore it.
++ */
++ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
++ xhci->quirks |= XHCI_LPM_SUPPORT;
++#endif
+ }
+
+ /* called during probe() after chip reset completes */
+@@ -79,7 +86,11 @@ static int xhci_plat_probe(struct platform_device *pdev)
+
+ driver = &xhci_plat_hc_driver;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ irq = XHC_IRQ;
++#else
+ irq = platform_get_irq(pdev, 0);
++#endif
+ if (irq < 0)
+ return -ENODEV;
+
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ unsigned int num_trbs)
+ {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ int num_trbs_in_deq_seg;
++#endif
+
+ if (ring->num_trbs_free < num_trbs)
+ return 0;
+
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
+ num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
+ if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
+ return 0;
+ }
++#endif
+
+ return 1;
+ }
+@@ -2799,6 +2803,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ next = ring->enqueue;
+
+ while (last_trb(xhci, ring, ring->enq_seg, next)) {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ /* If we're not dealing with 0.95 hardware or isoc rings
+ * on AMD 0.96 host, clear the chain bit.
+ */
+@@ -2808,6 +2813,9 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
+ else
+ next->link.control |= cpu_to_le32(TRB_CHAIN);
++#else
++ next->link.control &= cpu_to_le32(~TRB_CHAIN);
++#endif
+
+ wmb();
+ next->link.control ^= cpu_to_le32(TRB_CYCLE);
+@@ -2938,6 +2946,9 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+ start_trb->field[3] |= cpu_to_le32(start_cycle);
+ else
+ start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ wmb();
++#endif
+ xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
+ }
+
+@@ -2993,6 +3004,29 @@ static u32 xhci_td_remainder(unsigned int remainder)
+ return (remainder >> 10) << 17;
+ }
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
++{
++ u32 max = 31;
++ int remainder, td_packet_count, packet_transferred;
++
++ //0 for the last TRB
++ //FIXME: need to workaround if there is ZLP in this TD
++ if (td_running_total + trb_buffer_length == td_transfer_size)
++ return 0;
++
++ //FIXME: need to take care of high-bandwidth (MAX_ESIT)
++ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
++ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
++ remainder = td_packet_count - packet_transferred;
++
++ if (remainder > max)
++ return max << 17;
++ else
++ return remainder << 17;
++}
++#endif
++
+ /*
+ * For xHCI 1.0 host controllers, TD size is the number of max packet sized
+ * packets remaining in the TD (*not* including this TRB).
+@@ -3130,6 +3164,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ }
+
+ /* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->hci_version < 0x100) {
+ remainder = xhci_td_remainder(
+ urb->transfer_buffer_length -
+@@ -3139,6 +3174,12 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ trb_buff_len, total_packet_count, urb,
+ num_trbs - 1);
+ }
++#else
++ if (num_trbs > 1)
++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length,
++ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
++#endif
++
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+@@ -3201,6 +3242,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ int running_total, trb_buff_len, ret;
+ unsigned int total_packet_count;
+ u64 addr;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ int max_packet;
++#endif
+
+ if (urb->num_sgs)
+ return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
+@@ -3226,6 +3270,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+ /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ switch(urb->dev->speed){
++ case USB_SPEED_SUPER:
++ max_packet = urb->ep->desc.wMaxPacketSize;
++ break;
++ case USB_SPEED_HIGH:
++ case USB_SPEED_FULL:
++ case USB_SPEED_LOW:
++ case USB_SPEED_WIRELESS:
++ case USB_SPEED_UNKNOWN:
++ default:
++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++ break;
++ }
++ if((urb->transfer_flags & URB_ZERO_PACKET)
++ && ((urb->transfer_buffer_length % max_packet) == 0)){
++ num_trbs++;
++ }
++#endif
+
+ ret = prepare_transfer(xhci, xhci->devs[slot_id],
+ ep_index, urb->stream_id,
+@@ -3285,6 +3348,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ field |= TRB_ISP;
+
+ /* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->hci_version < 0x100) {
+ remainder = xhci_td_remainder(
+ urb->transfer_buffer_length -
+@@ -3294,6 +3358,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ trb_buff_len, total_packet_count, urb,
+ num_trbs - 1);
+ }
++#else
++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+@@ -3383,7 +3451,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ field |= 0x1;
+
+ /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if (1) {
++#else
+ if (xhci->hci_version == 0x100) {
++#endif
+ if (urb->transfer_buffer_length > 0) {
+ if (setup->bRequestType & USB_DIR_IN)
+ field |= TRB_TX_TYPE(TRB_DATA_IN);
+@@ -3407,7 +3479,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ field = TRB_TYPE(TRB_DATA);
+
+ length_field = TRB_LEN(urb->transfer_buffer_length) |
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ xhci_td_remainder(urb->transfer_buffer_length) |
++#else
++ //CC: MTK style, no scatter-gather for control transfer
++ 0 |
++#endif
+ TRB_INTR_TARGET(0);
+ if (urb->transfer_buffer_length > 0) {
+ if (setup->bRequestType & USB_DIR_IN)
+@@ -3530,6 +3607,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ u64 start_addr, addr;
+ int i, j;
+ bool more_trbs_coming;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ int max_packet;
++#endif
+
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+
+@@ -3543,6 +3623,21 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ switch(urb->dev->speed){
++ case USB_SPEED_SUPER:
++ max_packet = urb->ep->desc.wMaxPacketSize;
++ break;
++ case USB_SPEED_HIGH:
++ case USB_SPEED_FULL:
++ case USB_SPEED_LOW:
++ case USB_SPEED_WIRELESS:
++ case USB_SPEED_UNKNOWN:
++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++ break;
++ }
++#endif
++
+ urb_priv = urb->hcpriv;
+ /* Queue the first TRB, even if it's zero-length */
+ for (i = 0; i < num_tds; i++) {
+@@ -3614,9 +3709,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ } else {
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if (!(xhci->quirks & XHCI_AVOID_BEI)) {
++#else
+ if (xhci->hci_version == 0x100 &&
+ !(xhci->quirks &
+ XHCI_AVOID_BEI)) {
++#endif
+ /* Set BEI bit except for the last td */
+ if (i < num_tds - 1)
+ field |= TRB_BEI;
+@@ -3631,6 +3730,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ trb_buff_len = td_remain_len;
+
+ /* Set the TRB length, TD size, & interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->hci_version < 0x100) {
+ remainder = xhci_td_remainder(
+ td_len - running_total);
+@@ -3640,6 +3740,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ total_packet_count, urb,
+ (trbs_per_td - j - 1));
+ }
++#else
++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -32,6 +32,16 @@
+ #include "xhci.h"
+ #include "xhci-trace.h"
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include "mtk-phy.h"
++#include "xhci-mtk-scheduler.h"
++#include "xhci-mtk-power.h"
++#include "xhci-mtk.h"
++#endif
++
+ #define DRIVER_AUTHOR "Sarah Sharp"
+ #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+@@ -46,6 +56,18 @@ static unsigned int quirks;
+ module_param(quirks, uint, S_IRUGO);
+ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
++static struct file_operations xhci_mtk_test_fops = {
++ .owner = THIS_MODULE,
++ .read = xhci_mtk_test_read,
++ .write = xhci_mtk_test_write,
++ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl,
++ .open = xhci_mtk_test_open,
++ .release = xhci_mtk_test_release,
++};
++#endif
++
+ /* TODO: copied from ehci-hcd.c - can this be refactored? */
+ /*
+ * xhci_handshake - spin reading hc until handshake completes or fails
+@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
+ return ret;
+ }
+
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ static int xhci_free_msi(struct xhci_hcd *xhci)
+ {
+ int i;
+@@ -448,6 +470,11 @@ static void compliance_mode_recovery(unsigned long arg)
+ "Attempting compliance mode recovery");
+ hcd = xhci->shared_hcd;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ temp |= (1 << 31);
++ writel(temp, xhci->usb3_ports[i]);
++#endif
++
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+@@ -497,6 +524,9 @@ static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+ {
+ const char *dmi_product_name, *dmi_sys_vendor;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ return true;
++#endif
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (!dmi_product_name || !dmi_sys_vendor)
+@@ -542,6 +572,10 @@ int xhci_init(struct usb_hcd *hcd)
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "xHCI doesn't need link TRB QUIRK");
+ }
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ mtk_xhci_scheduler_init();
++#endif
+ retval = xhci_mem_init(xhci, GFP_KERNEL);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
+
+@@ -626,7 +660,11 @@ int xhci_run(struct usb_hcd *hcd)
+ "// Set the interrupt modulation register");
+ temp = readl(&xhci->ir_set->irq_control);
+ temp &= ~ER_IRQ_INTERVAL_MASK;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ temp |= (u32) 16;
++#else
+ temp |= (u32) 160;
++#endif
+ writel(temp, &xhci->ir_set->irq_control);
+
+ /* Set the HCD state before we enable the irqs */
+@@ -651,6 +689,9 @@ int xhci_run(struct usb_hcd *hcd)
+ xhci_queue_vendor_command(xhci, command, 0, 0, 0,
+ TRB_TYPE(TRB_NEC_GET_FW));
+ }
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ enableXhciAllPortPower(xhci);
++#endif
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Finished xhci_run for USB2 roothub");
+ return 0;
+@@ -1642,6 +1683,14 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ u32 drop_flag;
+ u32 new_add_flags, new_drop_flags;
+ int ret;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++ struct xhci_slot_ctx *slot_ctx;
++ struct sch_ep *sch_ep = NULL;
++ int isTT;
++ int ep_type;
++#endif
++#endif
+
+ ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ if (ret <= 0)
+@@ -1689,6 +1738,40 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+
+ xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
++ if ((slot_ctx->tt_info & 0xff) > 0) {
++ isTT = 1;
++ }
++ else {
++ isTT = 0;
++ }
++ if (usb_endpoint_xfer_int(&ep->desc)) {
++ ep_type = USB_EP_INT;
++ }
++ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++ ep_type = USB_EP_ISOC;
++ }
++ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++ ep_type = USB_EP_BULK;
++ }
++ else
++ ep_type = USB_EP_CONTROL;
++
++ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
++ , isTT, ep_type, (mtk_u32 *)ep);
++ if (sch_ep != NULL) {
++ kfree(sch_ep);
++ }
++ else {
++ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
++ }
++#else
++ mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
++#endif
++#endif
++
+ xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+@@ -1721,6 +1804,19 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ u32 new_add_flags, new_drop_flags;
+ struct xhci_virt_device *virt_dev;
+ int ret = 0;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ struct xhci_ep_ctx *in_ep_ctx;
++#if MTK_SCH_NEW
++ struct xhci_slot_ctx *slot_ctx;
++ struct sch_ep *sch_ep;
++ int isTT;
++ int ep_type;
++ int maxp = 0;
++ int burst = 0;
++ int mult = 0;
++ int interval;
++#endif
++#endif
+
+ ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ if (ret <= 0) {
+@@ -1787,6 +1883,56 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ return -ENOMEM;
+ }
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
++#if MTK_SCH_NEW
++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
++ if ((slot_ctx->tt_info & 0xff) > 0) {
++ isTT = 1;
++ }
++ else {
++ isTT = 0;
++ }
++ if (usb_endpoint_xfer_int(&ep->desc)) {
++ ep_type = USB_EP_INT;
++ }
++ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++ ep_type = USB_EP_ISOC;
++ }
++ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++ ep_type = USB_EP_BULK;
++ }
++ else
++ ep_type = USB_EP_CONTROL;
++
++ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH
++ || udev->speed == USB_SPEED_LOW) {
++ maxp = ep->desc.wMaxPacketSize & 0x7FF;
++ burst = ep->desc.wMaxPacketSize >> 11;
++ mult = 0;
++ }
++ else if (udev->speed == USB_SPEED_SUPER) {
++ maxp = ep->desc.wMaxPacketSize & 0x7FF;
++ burst = ep->ss_ep_comp.bMaxBurst;
++ mult = ep->ss_ep_comp.bmAttributes & 0x3;
++ }
++ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
++ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
++ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
++ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
++ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
++ xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++ return -ENOSPC;
++ }
++#else
++ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
++ xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++ return -ENOSPC;
++ }
++#endif
++#endif
+ ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+ new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+@@ -4451,8 +4597,14 @@ static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+ u16 *timeout)
+ {
+ if (state == USB3_LPM_U1)
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ return xhci_calculate_u1_timeout(xhci, udev, desc);
+ else if (state == USB3_LPM_U2)
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ return xhci_calculate_u2_timeout(xhci, udev, desc);
+
+ return USB3_LPM_DISABLED;
+@@ -4837,7 +4989,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+ hcd->self.no_sg_constraint = 1;
+
+ /* XHCI controllers don't stop the ep queue on short packets :| */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ hcd->self.no_stop_on_short = 1;
++#endif
+
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+ goto error;
+ xhci_dbg(xhci, "Reset complete\n");
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ setInitialReg();
++#endif
++
+ /* Set dma_mask and coherent_dma_mask to 64-bits,
+ * if xHC supports 64-bit addressing */
+ if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+@@ -4994,8 +5152,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+ MODULE_AUTHOR(DRIVER_AUTHOR);
+ MODULE_LICENSE("GPL");
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static struct resource xhci_resouce[] = {
++ {
++ .name = "xhci-hcd",
++ .start = XHC_IO_START,
++ .end = XHC_IO_START + XHC_IO_LENGTH -1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device xhci_platform_dev = {
++ .name = "xhci-hcd",
++ .id = -1,
++ .dev = {
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = xhci_resouce,
++};
++#endif
++
+ static int __init xhci_hcd_init(void)
+ {
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ struct platform_device *pPlatformDev;
++
++ register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
++
++ u3phy_init();
++ if (u3phy_ops->u2_slew_rate_calibration) {
++ u3phy_ops->u2_slew_rate_calibration(u3phy);
++ u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
++ }
++ else{
++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
++ }
++ u3phy_ops->init(u3phy);
++ reinitIP();
++
++ pPlatformDev = &xhci_platform_dev;
++ memset(pPlatformDev, 0, sizeof(struct platform_device));
++ pPlatformDev->name = "xhci-hcd";
++ pPlatformDev->id = -1;
++ pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
++ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
++ pPlatformDev->resource = xhci_resouce;
++ pPlatformDev->num_resources = ARRAY_SIZE(xhci_resouce);
++
++ platform_device_register(&xhci_platform_dev);
++
++#endif
++
+ /*
+ * Check the compiler generated sizes of structures that must be laid
+ * out in specific ways for hardware access.
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -32,6 +32,21 @@
+ #include "xhci-ext-caps.h"
+ #include "pci-quirks.h"
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#define XHC_IRQ (22 + 8)
++#define XHC_IO_START 0x1E1C0000
++#define XHC_IO_LENGTH 0x10000
++/* mtk scheduler bitmasks */
++#define BPKTS(p) ((p) & 0x3f)
++#define BCSCOUNT(p) (((p) & 0x7) << 8)
++#define BBM(p) ((p) << 11)
++#define BOFFSET(p) ((p) & 0x3fff)
++#define BREPEAT(p) (((p) & 0x7fff) << 16)
++#endif
++
++
++
++
+ /* xHCI PCI Configuration Registers */
+ #define XHCI_SBRN_OFFSET (0x60)
+
+@@ -1582,8 +1597,12 @@ struct xhci_hcd {
+ /* Compliance Mode Recovery Data */
+ struct timer_list comp_mode_recovery_timer;
+ u32 port_status_u0;
++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++#define COMP_MODE_RCVRY_MSECS 5000
++#else
+ /* Compliance Mode Timer Triggered every 2 seconds */
+ #define COMP_MODE_RCVRY_MSECS 2000
++#endif
+ };
+
+ /* convert between an HCD pointer and the corresponding EHCI_HCD */
+@@ -1731,6 +1750,26 @@ void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
+ void xhci_free_command(struct xhci_hcd *xhci,
+ struct xhci_command *command);
+
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++/* xHCI PCI glue */
++int xhci_register_pci(void);
++void xhci_unregister_pci(void);
++#else
++static inline int xhci_register_pci(void) { return 0; }
++static inline void xhci_unregister_pci(void) {}
++#endif
++
++#if defined(CONFIG_USB_XHCI_PLATFORM) \
++ || defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
++int xhci_register_plat(void);
++void xhci_unregister_plat(void);
++#else
++static inline int xhci_register_plat(void)
++{ return 0; }
++static inline void xhci_unregister_plat(void)
++{ }
++#endif
++
+ /* xHCI host controller glue */
+ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
+ int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+--- a/drivers/usb/phy/Kconfig
++++ b/drivers/usb/phy/Kconfig
+@@ -199,6 +199,14 @@ config USB_RCAR_GEN2_PHY
+ To compile this driver as a module, choose M here: the
+ module will be called phy-rcar-gen2-usb.
+
++config RALINK_USBPHY
++ bool "Ralink USB PHY controller Driver"
++ depends on MIPS && RALINK
++ select USB_PHY
++ help
++ Enable this to support ralink USB phy controller for ralink
++ SoCs.
++
+ config USB_ULPI
+ bool "Generic ULPI Transceiver Driver"
+ depends on ARM || ARM64
+--- a/drivers/usb/phy/Makefile
++++ b/drivers/usb/phy/Makefile
+@@ -27,3 +27,4 @@ obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o
+ obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
+ obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
+ obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
++obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
+--- /dev/null
++++ b/drivers/usb/phy/ralink-phy.c
+@@ -0,0 +1,193 @@
++/*
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * based on: Renesas R-Car USB phy driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/usb/otg.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RT_SYSC_REG_SYSCFG1 0x014
++#define RT_SYSC_REG_CLKCFG1 0x030
++#define RT_SYSC_REG_USB_PHY_CFG 0x05c
++
++#define RT_RSTCTRL_UDEV BIT(25)
++#define RT_RSTCTRL_UHST BIT(22)
++#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
++
++#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
++#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
++#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
++#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
++
++#define USB_PHY_UTMI_8B60M BIT(1)
++#define UDEV_WAKEUP BIT(0)
++
++static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
++static struct reset_control *rstdev;
++static struct reset_control *rsthost;
++static u32 phy_clk;
++
++static void usb_phy_enable(int state)
++{
++ if (state)
++ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
++ else
++ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
++ mdelay(100);
++}
++
++static int usb_power_on(struct usb_phy *phy)
++{
++ if (atomic_inc_return(&usb_pwr_ref) == 1) {
++ u32 t;
++
++ usb_phy_enable(1);
++
++// reset_control_assert(rstdev);
++// reset_control_assert(rsthost);
++
++ if (OTG_STATE_B_HOST) {
++ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
++ if (!IS_ERR(rsthost))
++ reset_control_deassert(rsthost);
++ if (!IS_ERR(rstdev))
++ reset_control_deassert(rstdev);
++ } else {
++ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
++ if (!IS_ERR(rstdev))
++ reset_control_deassert(rstdev);
++ }
++ mdelay(100);
++
++ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
++ dev_info(phy->dev, "remote usb device wakeup %s\n",
++ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
++ if (t & USB_PHY_UTMI_8B60M)
++ dev_info(phy->dev, "UTMI 8bit 60MHz\n");
++ else
++ dev_info(phy->dev, "UTMI 16bit 30MHz\n");
++ }
++
++ return 0;
++}
++
++static void usb_power_off(struct usb_phy *phy)
++{
++ if (atomic_dec_return(&usb_pwr_ref) == 0) {
++ usb_phy_enable(0);
++ if (!IS_ERR(rstdev))
++ reset_control_assert(rstdev);
++ if (!IS_ERR(rsthost))
++ reset_control_assert(rsthost);
++ }
++}
++
++static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
++{
++ otg->gadget = NULL;
++ otg->host = host;
++
++ return 0;
++}
++
++static int usb_set_peripheral(struct usb_otg *otg,
++ struct usb_gadget *gadget)
++{
++ otg->host = NULL;
++ otg->gadget = gadget;
++
++ return 0;
++}
++
++static const struct of_device_id ralink_usbphy_dt_match[] = {
++ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
++ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
++
++static int usb_phy_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct device *dev = &pdev->dev;
++ struct usb_otg *otg;
++ struct usb_phy *phy;
++ int ret;
++
++ match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
++ phy_clk = (int) match->data;
++
++ rsthost = devm_reset_control_get(&pdev->dev, "host");
++ rstdev = devm_reset_control_get(&pdev->dev, "device");
++
++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++ if (!phy) {
++ dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
++ return -ENOMEM;
++ }
++
++ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
++ if (!otg) {
++ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
++ return -ENOMEM;
++ }
++
++ phy->dev = dev;
++ phy->label = dev_name(dev);
++ phy->init = usb_power_on;
++ phy->shutdown = usb_power_off;
++ otg->set_host = usb_set_host;
++ otg->set_peripheral = usb_set_peripheral;
++ otg->phy = phy;
++ phy->otg = otg;
++ ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
++
++ if (ret < 0) {
++ dev_err(dev, "usb phy addition error\n");
++ return ret;
++ }
++
++ platform_set_drvdata(pdev, phy);
++
++ dev_info(&pdev->dev, "loaded\n");
++
++ return ret;
++}
++
++static int usb_phy_remove(struct platform_device *pdev)
++{
++ struct usb_phy *phy = platform_get_drvdata(pdev);
++
++ usb_remove_phy(phy);
++
++ return 0;
++}
++
++static struct platform_driver usb_phy_driver = {
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "rt3xxx-usbphy",
++ .of_match_table = of_match_ptr(ralink_usbphy_dt_match),
++ },
++ .probe = usb_phy_probe,
++ .remove = usb_phy_remove,
++};
++
++module_platform_driver(usb_phy_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Ralink USB phy");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
projects / openwrt / staging / kaloz.git / commitdiff