--- /dev/null
+/*
+ * CAN driver for PEAK System PCAN-USB FD / PCAN-USB Pro FD adapter
+ *
+ * Copyright (C) 2013-2014 Stephane Grosjean <s.grosjean@peak-system.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include "pcan_usb_core.h"
+#include "pcan_usb_pro.h"
+#include "pcan_ucan.h"
+
+MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB FD adapter");
+MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter");
+
+#define PCAN_USBPROFD_CHANNEL_COUNT 2
+#define PCAN_USBFD_CHANNEL_COUNT 1
+
+/* PCAN-USB Pro FD adapter internal clock (Hz) */
+#define PCAN_UFD_CRYSTAL_HZ 80000000
+
+#define PCAN_UFD_CMD_BUFFER_SIZE 512
+#define PCAN_UFD_LOSPD_PKT_SIZE 64
+
+/* PCAN-USB Pro FD command timeout (ms.) */
+#define PCAN_UFD_CMD_TIMEOUT_MS 1000
+
+/* PCAN-USB Pro FD rx/tx buffers size */
+#define PCAN_UFD_RX_BUFFER_SIZE 2048
+#define PCAN_UFD_TX_BUFFER_SIZE 512
+
+/* read some versions info from the hw devcie */
+struct __packed pcan_ufd_fw_info {
+ __le16 size_of; /* sizeof this */
+ __le16 type; /* type of this structure */
+ u8 hw_type; /* Type of hardware (HW_TYPE_xxx) */
+ u8 bl_version[3]; /* Bootloader version */
+ u8 hw_version; /* Hardware version (PCB) */
+ u8 fw_version[3]; /* Firmware version */
+ __le32 dev_id[2]; /* "device id" per CAN */
+ __le32 ser_no; /* S/N */
+ __le32 flags; /* special functions */
+};
+
+/* handle device specific info used by the netdevices */
+struct pcan_usb_fd_if {
+ struct peak_usb_device *dev[PCAN_USB_MAX_CHANNEL];
+ struct pcan_ufd_fw_info fw_info;
+ struct peak_time_ref time_ref;
+ int cm_ignore_count;
+ int dev_opened_count;
+};
+
+/* device information */
+struct pcan_usb_fd_device {
+ struct peak_usb_device dev;
+ struct can_berr_counter bec;
+ struct pcan_usb_fd_if *usb_if;
+ u8 *cmd_buffer_addr;
+};
+
+/* Extended USB commands (non uCAN commands) */
+
+/* Clock Modes command */
+#define PCAN_UFD_CMD_CLK_SET 0x80
+
+#define PCAN_UFD_CLK_80MHZ 0x0
+#define PCAN_UFD_CLK_60MHZ 0x1
+#define PCAN_UFD_CLK_40MHZ 0x2
+#define PCAN_UFD_CLK_30MHZ 0x3
+#define PCAN_UFD_CLK_24MHZ 0x4
+#define PCAN_UFD_CLK_20MHZ 0x5
+#define PCAN_UFD_CLK_DEF PCAN_UFD_CLK_80MHZ
+
+struct __packed pcan_ufd_clock {
+ __le16 opcode_channel;
+
+ u8 mode;
+ u8 unused[5];
+};
+
+/* LED control command */
+#define PCAN_UFD_CMD_LED_SET 0x86
+
+#define PCAN_UFD_LED_DEV 0x00
+#define PCAN_UFD_LED_FAST 0x01
+#define PCAN_UFD_LED_SLOW 0x02
+#define PCAN_UFD_LED_ON 0x03
+#define PCAN_UFD_LED_OFF 0x04
+#define PCAN_UFD_LED_DEF PCAN_UFD_LED_DEV
+
+struct __packed pcan_ufd_led {
+ __le16 opcode_channel;
+
+ u8 mode;
+ u8 unused[5];
+};
+
+/* Extended usage of uCAN commands CMD_RX_FRAME_xxxABLE for PCAN-USB Pro FD */
+#define PCAN_UFD_FLTEXT_CALIBRATION 0x8000
+
+struct __packed pcan_ufd_filter_ext {
+ __le16 opcode_channel;
+
+ __le16 ext_mask;
+ u16 unused;
+ __le16 usb_mask;
+};
+
+/* Extended usage of uCAN messages for PCAN-USB Pro FD */
+#define PCAN_UFD_MSG_CALIBRATION 0x100
+
+struct __packed pcan_ufd_ts_msg {
+ __le16 size;
+ __le16 type;
+ __le32 ts_low;
+ __le32 ts_high;
+ __le16 usb_frame_index;
+ u16 unused;
+};
+
+#define PCAN_UFD_MSG_OVERRUN 0x101
+
+#define PCAN_UFD_OVMSG_CHANNEL(o) ((o)->channel & 0xf)
+
+struct __packed pcan_ufd_ovr_msg {
+ __le16 size;
+ __le16 type;
+ __le32 ts_low;
+ __le32 ts_high;
+ u8 channel;
+ u8 unused[3];
+};
+
+static inline int pufd_omsg_get_channel(struct pcan_ufd_ovr_msg *om)
+{
+ return om->channel & 0xf;
+}
+
+/* Clock mode frequency values */
+static const u32 pcan_usb_fd_clk_freq[6] = {
+ [PCAN_UFD_CLK_80MHZ] = 80000000,
+ [PCAN_UFD_CLK_60MHZ] = 60000000,
+ [PCAN_UFD_CLK_40MHZ] = 40000000,
+ [PCAN_UFD_CLK_30MHZ] = 30000000,
+ [PCAN_UFD_CLK_24MHZ] = 24000000,
+ [PCAN_UFD_CLK_20MHZ] = 20000000
+};
+
+/* return a device USB interface */
+static inline
+struct pcan_usb_fd_if *pcan_usb_fd_dev_if(struct peak_usb_device *dev)
+{
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+ return pdev->usb_if;
+}
+
+/* return a device USB commands buffer */
+static inline void *pcan_usb_fd_cmd_buffer(struct peak_usb_device *dev)
+{
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+ return pdev->cmd_buffer_addr;
+}
+
+/* send PCAN-USB Pro FD commands synchronously */
+static int pcan_usb_fd_send_cmd(struct peak_usb_device *dev, void *cmd_tail)
+{
+ void *cmd_head = pcan_usb_fd_cmd_buffer(dev);
+ int err;
+ u8 *packet_ptr;
+ int i, n = 1, packet_len;
+ ptrdiff_t cmd_len;
+
+ /* usb device unregistered? */
+ if (!(dev->state & PCAN_USB_STATE_CONNECTED))
+ return 0;
+
+ /* if a packet is not filled completely by commands, the command list
+ * is terminated with an "end of collection" record.
+ */
+ cmd_len = cmd_tail - cmd_head;
+ if (cmd_len <= (PCAN_UFD_CMD_BUFFER_SIZE - sizeof(u64))) {
+ memset(cmd_tail, 0xff, sizeof(u64));
+ cmd_len += sizeof(u64);
+ }
+
+ packet_ptr = cmd_head;
+
+ /* firmware is not able to re-assemble 512 bytes buffer in full-speed */
+ if ((dev->udev->speed != USB_SPEED_HIGH) &&
+ (cmd_len > PCAN_UFD_LOSPD_PKT_SIZE)) {
+ packet_len = PCAN_UFD_LOSPD_PKT_SIZE;
+ n += cmd_len / packet_len;
+ } else {
+ packet_len = cmd_len;
+ }
+
+ for (i = 0; i < n; i++) {
+ err = usb_bulk_msg(dev->udev,
+ usb_sndbulkpipe(dev->udev,
+ PCAN_USBPRO_EP_CMDOUT),
+ packet_ptr, packet_len,
+ NULL, PCAN_UFD_CMD_TIMEOUT_MS);
+ if (err) {
+ netdev_err(dev->netdev,
+ "sending command failure: %d\n", err);
+ break;
+ }
+
+ packet_ptr += packet_len;
+ }
+
+ return err;
+}
+
+/* build the commands list in the given buffer, to enter operational mode */
+static int pcan_usb_fd_build_restart_cmd(struct peak_usb_device *dev, u8 *buf)
+{
+ struct pucan_wr_err_cnt *prc;
+ struct pucan_command *cmd;
+ u8 *pc = buf;
+
+ /* 1st, reset error counters: */
+ prc = (struct pucan_wr_err_cnt *)pc;
+ prc->opcode_channel = pucan_cmd_opcode_channel(dev,
+ PUCAN_CMD_WR_ERR_CNT);
+
+ /* select both counters */
+ prc->sel_mask = cpu_to_le16(PUCAN_WRERRCNT_TE|PUCAN_WRERRCNT_RE);
+
+ /* and reset their values */
+ prc->tx_counter = 0;
+ prc->rx_counter = 0;
+
+ /* moves the pointer forward */
+ pc += sizeof(struct pucan_wr_err_cnt);
+
+ /* next, go back to operational mode */
+ cmd = (struct pucan_command *)pc;
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ (dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) ?
+ PUCAN_CMD_LISTEN_ONLY_MODE :
+ PUCAN_CMD_NORMAL_MODE);
+ pc += sizeof(struct pucan_command);
+
+ return pc - buf;
+}
+
+/* set CAN bus on/off */
+static int pcan_usb_fd_set_bus(struct peak_usb_device *dev, u8 onoff)
+{
+ u8 *pc = pcan_usb_fd_cmd_buffer(dev);
+ int l;
+
+ if (onoff) {
+ /* build the cmds list to enter operational mode */
+ l = pcan_usb_fd_build_restart_cmd(dev, pc);
+ } else {
+ struct pucan_command *cmd = (struct pucan_command *)pc;
+
+ /* build cmd to go back to reset mode */
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ PUCAN_CMD_RESET_MODE);
+ l = sizeof(struct pucan_command);
+ }
+
+ /* send the command */
+ return pcan_usb_fd_send_cmd(dev, pc + l);
+}
+
+/* set filtering masks:
+ *
+ * idx in range [0..63] selects a row #idx, all rows otherwise
+ * mask in range [0..0xffffffff] defines up to 32 CANIDs in the row(s)
+ *
+ * Each bit of this 64 x 32 bits array defines a CANID value:
+ *
+ * bit[i,j] = 1 implies that CANID=(i x 32)+j will be received, while
+ * bit[i,j] = 0 implies that CANID=(i x 32)+j will be discarded.
+ */
+static int pcan_usb_fd_set_filter_std(struct peak_usb_device *dev, int idx,
+ u32 mask)
+{
+ struct pucan_filter_std *cmd = pcan_usb_fd_cmd_buffer(dev);
+ int i, n;
+
+ /* select all rows when idx is out of range [0..63] */
+ if ((idx < 0) || (idx >= (1 << PUCAN_FLTSTD_ROW_IDX_BITS))) {
+ n = 1 << PUCAN_FLTSTD_ROW_IDX_BITS;
+ idx = 0;
+
+ /* select the row (and only the row) otherwise */
+ } else {
+ n = idx + 1;
+ }
+
+ for (i = idx; i < n; i++, cmd++) {
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ PUCAN_CMD_FILTER_STD);
+ cmd->idx = cpu_to_le16(i);
+ cmd->mask = cpu_to_le32(mask);
+ }
+
+ /* send the command */
+ return pcan_usb_fd_send_cmd(dev, cmd);
+}
+
+/* set/unset notifications filter:
+ *
+ * onoff sets(1)/unset(0) notifications
+ * mask each bit defines a kind of notification to set/unset
+ */
+static int pcan_usb_fd_set_filter_ext(struct peak_usb_device *dev,
+ bool onoff, u16 ext_mask, u16 usb_mask)
+{
+ struct pcan_ufd_filter_ext *cmd = pcan_usb_fd_cmd_buffer(dev);
+
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ (onoff) ? PUCAN_CMD_RX_FRAME_ENABLE :
+ PUCAN_CMD_RX_FRAME_DISABLE);
+
+ cmd->ext_mask = cpu_to_le16(ext_mask);
+ cmd->usb_mask = cpu_to_le16(usb_mask);
+
+ /* send the command */
+ return pcan_usb_fd_send_cmd(dev, ++cmd);
+}
+
+/* setup LED control */
+static int pcan_usb_fd_set_can_led(struct peak_usb_device *dev, u8 led_mode)
+{
+ struct pcan_ufd_led *cmd = pcan_usb_fd_cmd_buffer(dev);
+
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ PCAN_UFD_CMD_LED_SET);
+ cmd->mode = led_mode;
+
+ /* send the command */
+ return pcan_usb_fd_send_cmd(dev, ++cmd);
+}
+
+/* set CAN clock domain */
+static int pcan_usb_fd_set_clock_domain(struct peak_usb_device *dev,
+ u8 clk_mode)
+{
+ struct pcan_ufd_clock *cmd = pcan_usb_fd_cmd_buffer(dev);
+
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ PCAN_UFD_CMD_CLK_SET);
+ cmd->mode = clk_mode;
+
+ /* send the command */
+ return pcan_usb_fd_send_cmd(dev, ++cmd);
+}
+
+/* set bittiming for CAN and CAN-FD header */
+static int pcan_usb_fd_set_bittiming_slow(struct peak_usb_device *dev,
+ struct can_bittiming *bt)
+{
+ struct pucan_timing_slow *cmd = pcan_usb_fd_cmd_buffer(dev);
+
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ PUCAN_CMD_TIMING_SLOW);
+ cmd->sjw_t = PUCAN_TSLOW_SJW_T(bt->sjw - 1,
+ dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES);
+
+ cmd->tseg2 = PUCAN_TSLOW_TSEG2(bt->phase_seg2 - 1);
+ cmd->tseg1 = PUCAN_TSLOW_TSEG1(bt->prop_seg + bt->phase_seg1 - 1);
+ cmd->brp = cpu_to_le16(PUCAN_TSLOW_BRP(bt->brp - 1));
+
+ cmd->ewl = 96; /* default */
+
+ /* send the command */
+ return pcan_usb_fd_send_cmd(dev, ++cmd);
+}
+
+/* set CAN-FD bittiming for data */
+static int pcan_usb_fd_set_bittiming_fast(struct peak_usb_device *dev,
+ struct can_bittiming *bt)
+{
+ struct pucan_timing_fast *cmd = pcan_usb_fd_cmd_buffer(dev);
+
+ cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
+ PUCAN_CMD_TIMING_FAST);
+ cmd->sjw = PUCAN_TFAST_SJW(bt->sjw - 1);
+ cmd->tseg2 = PUCAN_TFAST_TSEG2(bt->phase_seg2 - 1);
+ cmd->tseg1 = PUCAN_TFAST_TSEG1(bt->prop_seg + bt->phase_seg1 - 1);
+ cmd->brp = cpu_to_le16(PUCAN_TFAST_BRP(bt->brp - 1));
+
+ /* send the command */
+ return pcan_usb_fd_send_cmd(dev, ++cmd);
+}
+
+/* handle restart but in asynchronously way
+ * (uses PCAN-USB Pro code to complete asynchronous request)
+ */
+static int pcan_usb_fd_restart_async(struct peak_usb_device *dev,
+ struct urb *urb, u8 *buf)
+{
+ u8 *pc = buf;
+
+ /* build the entire cmds list in the provided buffer, to go back into
+ * operational mode.
+ */
+ pc += pcan_usb_fd_build_restart_cmd(dev, pc);
+
+ /* add EOC */
+ memset(pc, 0xff, sizeof(struct pucan_command));
+ pc += sizeof(struct pucan_command);
+
+ /* complete the URB */
+ usb_fill_bulk_urb(urb, dev->udev,
+ usb_sndbulkpipe(dev->udev, PCAN_USBPRO_EP_CMDOUT),
+ buf, pc - buf,
+ pcan_usb_pro_restart_complete, dev);
+
+ /* and submit it. */
+ return usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static int pcan_usb_fd_drv_loaded(struct peak_usb_device *dev, bool loaded)
+{
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+
+ pdev->cmd_buffer_addr[0] = 0;
+ pdev->cmd_buffer_addr[1] = !!loaded;
+
+ return pcan_usb_pro_send_req(dev,
+ PCAN_USBPRO_REQ_FCT,
+ PCAN_USBPRO_FCT_DRVLD,
+ pdev->cmd_buffer_addr,
+ PCAN_USBPRO_FCT_DRVLD_REQ_LEN);
+}
+
+static int pcan_usb_fd_decode_canmsg(struct pcan_usb_fd_if *usb_if,
+ struct pucan_msg *rx_msg)
+{
+ struct pucan_rx_msg *rm = (struct pucan_rx_msg *)rx_msg;
+ struct peak_usb_device *dev = usb_if->dev[pucan_msg_get_channel(rm)];
+ struct net_device *netdev = dev->netdev;
+ struct canfd_frame *cfd;
+ struct sk_buff *skb;
+ const u16 rx_msg_flags = le16_to_cpu(rm->flags);
+
+ if (rx_msg_flags & PUCAN_MSG_EXT_DATA_LEN) {
+ /* CANFD frame case */
+ skb = alloc_canfd_skb(netdev, &cfd);
+ if (!skb)
+ return -ENOMEM;
+
+ if (rx_msg_flags & PUCAN_MSG_BITRATE_SWITCH)
+ cfd->flags |= CANFD_BRS;
+
+ if (rx_msg_flags & PUCAN_MSG_ERROR_STATE_IND)
+ cfd->flags |= CANFD_ESI;
+
+ cfd->len = can_dlc2len(get_canfd_dlc(pucan_msg_get_dlc(rm)));
+ } else {
+ /* CAN 2.0 frame case */
+ skb = alloc_can_skb(netdev, (struct can_frame **)&cfd);
+ if (!skb)
+ return -ENOMEM;
+
+ cfd->len = get_can_dlc(pucan_msg_get_dlc(rm));
+ }
+
+ cfd->can_id = le32_to_cpu(rm->can_id);
+
+ if (rx_msg_flags & PUCAN_MSG_EXT_ID)
+ cfd->can_id |= CAN_EFF_FLAG;
+
+ if (rx_msg_flags & PUCAN_MSG_RTR)
+ cfd->can_id |= CAN_RTR_FLAG;
+ else
+ memcpy(cfd->data, rm->d, cfd->len);
+
+ peak_usb_netif_rx(skb, &usb_if->time_ref,
+ le32_to_cpu(rm->ts_low), le32_to_cpu(rm->ts_high));
+
+ netdev->stats.rx_packets++;
+ netdev->stats.rx_bytes += cfd->len;
+
+ return 0;
+}
+
+/* handle uCAN status message */
+static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if,
+ struct pucan_msg *rx_msg)
+{
+ struct pucan_status_msg *sm = (struct pucan_status_msg *)rx_msg;
+ struct peak_usb_device *dev = usb_if->dev[pucan_stmsg_get_channel(sm)];
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+ enum can_state new_state = CAN_STATE_ERROR_ACTIVE;
+ enum can_state rx_state, tx_state;
+ struct net_device *netdev = dev->netdev;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ /* nothing should be sent while in BUS_OFF state */
+ if (dev->can.state == CAN_STATE_BUS_OFF)
+ return 0;
+
+ if (sm->channel_p_w_b & PUCAN_BUS_BUSOFF) {
+ new_state = CAN_STATE_BUS_OFF;
+ } else if (sm->channel_p_w_b & PUCAN_BUS_PASSIVE) {
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ } else if (sm->channel_p_w_b & PUCAN_BUS_WARNING) {
+ new_state = CAN_STATE_ERROR_WARNING;
+ } else {
+ /* no error bit (so, no error skb, back to active state) */
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+ pdev->bec.txerr = 0;
+ pdev->bec.rxerr = 0;
+ return 0;
+ }
+
+ /* state hasn't changed */
+ if (new_state == dev->can.state)
+ return 0;
+
+ /* handle bus state change */
+ tx_state = (pdev->bec.txerr >= pdev->bec.rxerr) ? new_state : 0;
+ rx_state = (pdev->bec.txerr <= pdev->bec.rxerr) ? new_state : 0;
+
+ /* allocate an skb to store the error frame */
+ skb = alloc_can_err_skb(netdev, &cf);
+ if (skb)
+ can_change_state(netdev, cf, tx_state, rx_state);
+
+ /* things must be done even in case of OOM */
+ if (new_state == CAN_STATE_BUS_OFF)
+ can_bus_off(netdev);
+
+ if (!skb)
+ return -ENOMEM;
+
+ peak_usb_netif_rx(skb, &usb_if->time_ref,
+ le32_to_cpu(sm->ts_low), le32_to_cpu(sm->ts_high));
+
+ netdev->stats.rx_packets++;
+ netdev->stats.rx_bytes += cf->can_dlc;
+
+ return 0;
+}
+
+/* handle uCAN error message */
+static int pcan_usb_fd_decode_error(struct pcan_usb_fd_if *usb_if,
+ struct pucan_msg *rx_msg)
+{
+ struct pucan_error_msg *er = (struct pucan_error_msg *)rx_msg;
+ struct peak_usb_device *dev = usb_if->dev[pucan_ermsg_get_channel(er)];
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+
+ /* keep a trace of tx and rx error counters for later use */
+ pdev->bec.txerr = er->tx_err_cnt;
+ pdev->bec.rxerr = er->rx_err_cnt;
+
+ return 0;
+}
+
+/* handle uCAN overrun message */
+static int pcan_usb_fd_decode_overrun(struct pcan_usb_fd_if *usb_if,
+ struct pucan_msg *rx_msg)
+{
+ struct pcan_ufd_ovr_msg *ov = (struct pcan_ufd_ovr_msg *)rx_msg;
+ struct peak_usb_device *dev = usb_if->dev[pufd_omsg_get_channel(ov)];
+ struct net_device *netdev = dev->netdev;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ /* allocate an skb to store the error frame */
+ skb = alloc_can_err_skb(netdev, &cf);
+ if (!skb)
+ return -ENOMEM;
+
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
+
+ peak_usb_netif_rx(skb, &usb_if->time_ref,
+ le32_to_cpu(ov->ts_low), le32_to_cpu(ov->ts_high));
+
+ netdev->stats.rx_over_errors++;
+ netdev->stats.rx_errors++;
+
+ return 0;
+}
+
+/* handle USB calibration message */
+static void pcan_usb_fd_decode_ts(struct pcan_usb_fd_if *usb_if,
+ struct pucan_msg *rx_msg)
+{
+ struct pcan_ufd_ts_msg *ts = (struct pcan_ufd_ts_msg *)rx_msg;
+
+ /* should wait until clock is stabilized */
+ if (usb_if->cm_ignore_count > 0)
+ usb_if->cm_ignore_count--;
+ else
+ peak_usb_set_ts_now(&usb_if->time_ref, le32_to_cpu(ts->ts_low));
+}
+
+/* callback for bulk IN urb */
+static int pcan_usb_fd_decode_buf(struct peak_usb_device *dev, struct urb *urb)
+{
+ struct pcan_usb_fd_if *usb_if = pcan_usb_fd_dev_if(dev);
+ struct net_device *netdev = dev->netdev;
+ struct pucan_msg *rx_msg;
+ u8 *msg_ptr, *msg_end;
+ int err = 0;
+
+ /* loop reading all the records from the incoming message */
+ msg_ptr = urb->transfer_buffer;
+ msg_end = urb->transfer_buffer + urb->actual_length;
+ for (; msg_ptr < msg_end;) {
+ u16 rx_msg_type, rx_msg_size;
+
+ rx_msg = (struct pucan_msg *)msg_ptr;
+ if (!rx_msg->size) {
+ /* null packet found: end of list */
+ break;
+ }
+
+ rx_msg_size = le16_to_cpu(rx_msg->size);
+ rx_msg_type = le16_to_cpu(rx_msg->type);
+
+ /* check if the record goes out of current packet */
+ if (msg_ptr + rx_msg_size > msg_end) {
+ netdev_err(netdev,
+ "got frag rec: should inc usb rx buf sze\n");
+ err = -EBADMSG;
+ break;
+ }
+
+ switch (rx_msg_type) {
+ case PUCAN_MSG_CAN_RX:
+ err = pcan_usb_fd_decode_canmsg(usb_if, rx_msg);
+ if (err < 0)
+ goto fail;
+ break;
+
+ case PCAN_UFD_MSG_CALIBRATION:
+ pcan_usb_fd_decode_ts(usb_if, rx_msg);
+ break;
+
+ case PUCAN_MSG_ERROR:
+ err = pcan_usb_fd_decode_error(usb_if, rx_msg);
+ if (err < 0)
+ goto fail;
+ break;
+
+ case PUCAN_MSG_STATUS:
+ err = pcan_usb_fd_decode_status(usb_if, rx_msg);
+ if (err < 0)
+ goto fail;
+ break;
+
+ case PCAN_UFD_MSG_OVERRUN:
+ err = pcan_usb_fd_decode_overrun(usb_if, rx_msg);
+ if (err < 0)
+ goto fail;
+ break;
+
+ default:
+ netdev_err(netdev,
+ "unhandled msg type 0x%02x (%d): ignored\n",
+ rx_msg_type, rx_msg_type);
+ break;
+ }
+
+ msg_ptr += rx_msg_size;
+ }
+
+fail:
+ if (err)
+ pcan_dump_mem("received msg",
+ urb->transfer_buffer, urb->actual_length);
+ return err;
+}
+
+/* CAN/CANFD frames encoding callback */
+static int pcan_usb_fd_encode_msg(struct peak_usb_device *dev,
+ struct sk_buff *skb, u8 *obuf, size_t *size)
+{
+ struct pucan_tx_msg *tx_msg = (struct pucan_tx_msg *)obuf;
+ struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
+ u16 tx_msg_size, tx_msg_flags;
+ u8 can_dlc;
+
+ tx_msg_size = ALIGN(sizeof(struct pucan_tx_msg) + cfd->len, 4);
+ tx_msg->size = cpu_to_le16(tx_msg_size);
+ tx_msg->type = cpu_to_le16(PUCAN_MSG_CAN_TX);
+
+ tx_msg_flags = 0;
+ if (cfd->can_id & CAN_EFF_FLAG) {
+ tx_msg_flags |= PUCAN_MSG_EXT_ID;
+ tx_msg->can_id = cpu_to_le32(cfd->can_id & CAN_EFF_MASK);
+ } else {
+ tx_msg->can_id = cpu_to_le32(cfd->can_id & CAN_SFF_MASK);
+ }
+
+ if (can_is_canfd_skb(skb)) {
+ /* considering a CANFD frame */
+ can_dlc = can_len2dlc(cfd->len);
+
+ tx_msg_flags |= PUCAN_MSG_EXT_DATA_LEN;
+
+ if (cfd->flags & CANFD_BRS)
+ tx_msg_flags |= PUCAN_MSG_BITRATE_SWITCH;
+
+ if (cfd->flags & CANFD_ESI)
+ tx_msg_flags |= PUCAN_MSG_ERROR_STATE_IND;
+ } else {
+ /* CAND 2.0 frames */
+ can_dlc = cfd->len;
+
+ if (cfd->can_id & CAN_RTR_FLAG)
+ tx_msg_flags |= PUCAN_MSG_RTR;
+ }
+
+ tx_msg->flags = cpu_to_le16(tx_msg_flags);
+ tx_msg->channel_dlc = PUCAN_MSG_CHANNEL_DLC(dev->ctrl_idx, can_dlc);
+ memcpy(tx_msg->d, cfd->data, cfd->len);
+
+ /* add null size message to tag the end (messages are 32-bits aligned)
+ */
+ tx_msg = (struct pucan_tx_msg *)(obuf + tx_msg_size);
+
+ tx_msg->size = 0;
+
+ /* set the whole size of the USB packet to send */
+ *size = tx_msg_size + sizeof(u32);
+
+ return 0;
+}
+
+/* start the interface (last chance before set bus on) */
+static int pcan_usb_fd_start(struct peak_usb_device *dev)
+{
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+ int err;
+
+ /* set filter mode: all acceptance */
+ err = pcan_usb_fd_set_filter_std(dev, -1, 0xffffffff);
+ if (err)
+ return err;
+
+ /* opening first device: */
+ if (pdev->usb_if->dev_opened_count == 0) {
+ /* reset time_ref */
+ peak_usb_init_time_ref(&pdev->usb_if->time_ref,
+ &pcan_usb_pro_fd);
+
+ /* enable USB calibration messages */
+ err = pcan_usb_fd_set_filter_ext(dev, 1,
+ PUCAN_FLTEXT_ERROR,
+ PCAN_UFD_FLTEXT_CALIBRATION);
+ }
+
+ pdev->usb_if->dev_opened_count++;
+
+ /* reset cached error counters */
+ pdev->bec.txerr = 0;
+ pdev->bec.rxerr = 0;
+
+ return err;
+}
+
+/* socket callback used to copy berr counters values receieved through USB */
+static int pcan_usb_fd_get_berr_counter(const struct net_device *netdev,
+ struct can_berr_counter *bec)
+{
+ struct peak_usb_device *dev = netdev_priv(netdev);
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+
+ *bec = pdev->bec;
+
+ /* must return 0 */
+ return 0;
+}
+
+/* stop interface (last chance before set bus off) */
+static int pcan_usb_fd_stop(struct peak_usb_device *dev)
+{
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+
+ /* turn off special msgs for that interface if no other dev opened */
+ if (pdev->usb_if->dev_opened_count == 1)
+ pcan_usb_fd_set_filter_ext(dev, 0,
+ PUCAN_FLTEXT_ERROR,
+ PCAN_UFD_FLTEXT_CALIBRATION);
+ pdev->usb_if->dev_opened_count--;
+
+ return 0;
+}
+
+/* called when probing, to initialize a device object */
+static int pcan_usb_fd_init(struct peak_usb_device *dev)
+{
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+ int i, err = -ENOMEM;
+
+ /* do this for 1st channel only */
+ if (!dev->prev_siblings) {
+ /* allocate netdevices common structure attached to first one */
+ pdev->usb_if = kzalloc(sizeof(*pdev->usb_if), GFP_KERNEL);
+ if (!pdev->usb_if)
+ goto err_out;
+
+ /* allocate command buffer once for all for the interface */
+ pdev->cmd_buffer_addr = kmalloc(PCAN_UFD_CMD_BUFFER_SIZE,
+ GFP_KERNEL);
+ if (!pdev->cmd_buffer_addr)
+ goto err_out_1;
+
+ /* number of ts msgs to ignore before taking one into account */
+ pdev->usb_if->cm_ignore_count = 5;
+
+ err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO,
+ PCAN_USBPRO_INFO_FW,
+ &pdev->usb_if->fw_info,
+ sizeof(pdev->usb_if->fw_info));
+ if (err) {
+ dev_err(dev->netdev->dev.parent,
+ "unable to read %s firmware info (err %d)\n",
+ dev->adapter->name, err);
+ goto err_out_2;
+ }
+
+ /* explicit use of dev_xxx() instead of netdev_xxx() here:
+ * information displayed are related to the device itself, not
+ * to the canx (channel) device.
+ */
+ dev_info(dev->netdev->dev.parent,
+ "PEAK-System %s v%u fw v%u.%u.%u (%u channels)\n",
+ dev->adapter->name, pdev->usb_if->fw_info.hw_version,
+ pdev->usb_if->fw_info.fw_version[0],
+ pdev->usb_if->fw_info.fw_version[1],
+ pdev->usb_if->fw_info.fw_version[2],
+ dev->adapter->ctrl_count);
+
+ /* the currently supported hw is non-ISO */
+ dev->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+
+ /* tell the hardware the can driver is running */
+ err = pcan_usb_fd_drv_loaded(dev, 1);
+ if (err) {
+ dev_err(dev->netdev->dev.parent,
+ "unable to tell %s driver is loaded (err %d)\n",
+ dev->adapter->name, err);
+ goto err_out_2;
+ }
+ } else {
+ /* otherwise, simply copy previous sibling's values */
+ struct pcan_usb_fd_device *ppdev =
+ container_of(dev->prev_siblings,
+ struct pcan_usb_fd_device, dev);
+
+ pdev->usb_if = ppdev->usb_if;
+ pdev->cmd_buffer_addr = ppdev->cmd_buffer_addr;
+ }
+
+ pdev->usb_if->dev[dev->ctrl_idx] = dev;
+ dev->device_number =
+ le32_to_cpu(pdev->usb_if->fw_info.dev_id[dev->ctrl_idx]);
+
+ /* set clock domain */
+ for (i = 0; i < ARRAY_SIZE(pcan_usb_fd_clk_freq); i++)
+ if (dev->adapter->clock.freq == pcan_usb_fd_clk_freq[i])
+ break;
+
+ if (i >= ARRAY_SIZE(pcan_usb_fd_clk_freq)) {
+ dev_warn(dev->netdev->dev.parent,
+ "incompatible clock frequencies\n");
+ err = -EINVAL;
+ goto err_out_2;
+ }
+
+ pcan_usb_fd_set_clock_domain(dev, i);
+
+ /* set LED in default state (end of init phase) */
+ pcan_usb_fd_set_can_led(dev, PCAN_UFD_LED_DEF);
+
+ return 0;
+
+err_out_2:
+ kfree(pdev->cmd_buffer_addr);
+err_out_1:
+ kfree(pdev->usb_if);
+err_out:
+ return err;
+}
+
+/* called when driver module is being unloaded */
+static void pcan_usb_fd_exit(struct peak_usb_device *dev)
+{
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+
+ /* when rmmod called before unplug and if down, should reset things
+ * before leaving
+ */
+ if (dev->can.state != CAN_STATE_STOPPED) {
+ /* set bus off on the corresponding channel */
+ pcan_usb_fd_set_bus(dev, 0);
+ }
+
+ /* switch off corresponding CAN LEDs */
+ pcan_usb_fd_set_can_led(dev, PCAN_UFD_LED_OFF);
+
+ /* if channel #0 (only) */
+ if (dev->ctrl_idx == 0) {
+ /* turn off calibration message if any device were opened */
+ if (pdev->usb_if->dev_opened_count > 0)
+ pcan_usb_fd_set_filter_ext(dev, 0,
+ PUCAN_FLTEXT_ERROR,
+ PCAN_UFD_FLTEXT_CALIBRATION);
+
+ /* tell USB adapter that the driver is being unloaded */
+ pcan_usb_fd_drv_loaded(dev, 0);
+ }
+}
+
+/* called when the USB adapter is unplugged */
+static void pcan_usb_fd_free(struct peak_usb_device *dev)
+{
+ /* last device: can free shared objects now */
+ if (!dev->prev_siblings && !dev->next_siblings) {
+ struct pcan_usb_fd_device *pdev =
+ container_of(dev, struct pcan_usb_fd_device, dev);
+
+ /* free commands buffer */
+ kfree(pdev->cmd_buffer_addr);
+
+ /* free usb interface object */
+ kfree(pdev->usb_if);
+ }
+}
+
+/* describes the PCAN-USB FD adapter */
+const struct peak_usb_adapter pcan_usb_fd = {
+ .name = "PCAN-USB FD",
+ .device_id = PCAN_USBFD_PRODUCT_ID,
+ .ctrl_count = PCAN_USBFD_CHANNEL_COUNT,
+ .ctrlmode_supported = CAN_CTRLMODE_FD |
+ CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY,
+ .clock = {
+ .freq = PCAN_UFD_CRYSTAL_HZ,
+ },
+ .bittiming_const = {
+ .name = "pcan_usb_fd",
+ .tseg1_min = 1,
+ .tseg1_max = 64,
+ .tseg2_min = 1,
+ .tseg2_max = 16,
+ .sjw_max = 16,
+ .brp_min = 1,
+ .brp_max = 1024,
+ .brp_inc = 1,
+ },
+ .data_bittiming_const = {
+ .name = "pcan_usb_fd",
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 1024,
+ .brp_inc = 1,
+ },
+
+ /* size of device private data */
+ .sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
+
+ /* timestamps usage */
+ .ts_used_bits = 32,
+ .ts_period = 1000000, /* calibration period in ts. */
+ .us_per_ts_scale = 1, /* us = (ts * scale) >> shift */
+ .us_per_ts_shift = 0,
+
+ /* give here messages in/out endpoints */
+ .ep_msg_in = PCAN_USBPRO_EP_MSGIN,
+ .ep_msg_out = {PCAN_USBPRO_EP_MSGOUT_0},
+
+ /* size of rx/tx usb buffers */
+ .rx_buffer_size = PCAN_UFD_RX_BUFFER_SIZE,
+ .tx_buffer_size = PCAN_UFD_TX_BUFFER_SIZE,
+
+ /* device callbacks */
+ .intf_probe = pcan_usb_pro_probe, /* same as PCAN-USB Pro */
+ .dev_init = pcan_usb_fd_init,
+
+ .dev_exit = pcan_usb_fd_exit,
+ .dev_free = pcan_usb_fd_free,
+ .dev_set_bus = pcan_usb_fd_set_bus,
+ .dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
+ .dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
+ .dev_decode_buf = pcan_usb_fd_decode_buf,
+ .dev_start = pcan_usb_fd_start,
+ .dev_stop = pcan_usb_fd_stop,
+ .dev_restart_async = pcan_usb_fd_restart_async,
+ .dev_encode_msg = pcan_usb_fd_encode_msg,
+
+ .do_get_berr_counter = pcan_usb_fd_get_berr_counter,
+};
+
+/* describes the PCAN-USB Pro FD adapter */
+const struct peak_usb_adapter pcan_usb_pro_fd = {
+ .name = "PCAN-USB Pro FD",
+ .device_id = PCAN_USBPROFD_PRODUCT_ID,
+ .ctrl_count = PCAN_USBPROFD_CHANNEL_COUNT,
+ .ctrlmode_supported = CAN_CTRLMODE_FD |
+ CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY,
+ .clock = {
+ .freq = PCAN_UFD_CRYSTAL_HZ,
+ },
+ .bittiming_const = {
+ .name = "pcan_usb_pro_fd",
+ .tseg1_min = 1,
+ .tseg1_max = 64,
+ .tseg2_min = 1,
+ .tseg2_max = 16,
+ .sjw_max = 16,
+ .brp_min = 1,
+ .brp_max = 1024,
+ .brp_inc = 1,
+ },
+ .data_bittiming_const = {
+ .name = "pcan_usb_pro_fd",
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 1024,
+ .brp_inc = 1,
+ },
+
+ /* size of device private data */
+ .sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
+
+ /* timestamps usage */
+ .ts_used_bits = 32,
+ .ts_period = 1000000, /* calibration period in ts. */
+ .us_per_ts_scale = 1, /* us = (ts * scale) >> shift */
+ .us_per_ts_shift = 0,
+
+ /* give here messages in/out endpoints */
+ .ep_msg_in = PCAN_USBPRO_EP_MSGIN,
+ .ep_msg_out = {PCAN_USBPRO_EP_MSGOUT_0, PCAN_USBPRO_EP_MSGOUT_1},
+
+ /* size of rx/tx usb buffers */
+ .rx_buffer_size = PCAN_UFD_RX_BUFFER_SIZE,
+ .tx_buffer_size = PCAN_UFD_TX_BUFFER_SIZE,
+
+ /* device callbacks */
+ .intf_probe = pcan_usb_pro_probe, /* same as PCAN-USB Pro */
+ .dev_init = pcan_usb_fd_init,
+
+ .dev_exit = pcan_usb_fd_exit,
+ .dev_free = pcan_usb_fd_free,
+ .dev_set_bus = pcan_usb_fd_set_bus,
+ .dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
+ .dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
+ .dev_decode_buf = pcan_usb_fd_decode_buf,
+ .dev_start = pcan_usb_fd_start,
+ .dev_stop = pcan_usb_fd_stop,
+ .dev_restart_async = pcan_usb_fd_restart_async,
+ .dev_encode_msg = pcan_usb_fd_encode_msg,
+
+ .do_get_berr_counter = pcan_usb_fd_get_berr_counter,
+};
projects / openwrt / staging / blogic.git / commitdiff