IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
TPLINK_BOARD := ARCHER-C5-V2
endef
-# TARGET_DEVICES += tplink-archer-c5-v2
+TARGET_DEVICES += tplink-archer-c5-v2
define Device/tplink-archer-c9-v1
DEVICE_TITLE := TP-LINK Archer C9 V1
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's enough to have proper stdout-path for getting serial working but
+for some reason LEDE doesn't offer "Please press Enter to activate this
+console." unless ttyS0 is specified.
+
+This is a workaround to get serial working in LEDE.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -13,7 +13,7 @@
+ model = "TP-LINK Archer C5 V2";
+
+ chosen {
+- bootargs = "earlycon";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
#include <uapi/linux/magic.h>
-@@ -249,6 +250,28 @@ static int bcm47xxpart_parse(struct mtd_
+@@ -249,6 +250,36 @@ static int bcm47xxpart_parse(struct mtd_
break;
}
+ */
+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
+ continue;
++ } else if (of_machine_is_compatible("tplink,archer-c5-v2") && offset == 0xe40000) {
++ /*
++ * There is a whole set of partitions (not even listed
++ * by original firmware): "default-mac", "pin",
++ * "partition-table", etc.
++ */
++ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
++ continue;
+ } else if (of_machine_is_compatible("tplink,archer-c9-v1") && offset == 0xe40000) {
+ /*
+ * There is a whole set of partitions (not even listed
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's enough to have proper stdout-path for getting serial working but
+for some reason LEDE doesn't offer "Please press Enter to activate this
+console." unless ttyS0 is specified.
+
+This is a workaround to get serial working in LEDE.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -13,7 +13,7 @@
+ model = "TP-LINK Archer C5 V2";
+
+ chosen {
+- bootargs = "earlycon";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
#include <uapi/linux/magic.h>
-@@ -249,6 +250,28 @@ static int bcm47xxpart_parse(struct mtd_
+@@ -249,6 +250,36 @@ static int bcm47xxpart_parse(struct mtd_
break;
}
+ */
+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
+ continue;
++ } else if (of_machine_is_compatible("tplink,archer-c5-v2") && offset == 0xe40000) {
++ /*
++ * There is a whole set of partitions (not even listed
++ * by original firmware): "default-mac", "pin",
++ * "partition-table", etc.
++ */
++ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
++ continue;
+ } else if (of_machine_is_compatible("tplink,archer-c9-v1") && offset == 0xe40000) {
+ /*
+ * There is a whole set of partitions (not even listed