--- /dev/null
+--- a/net80211/ieee80211_rate.h
++++ b/net80211/ieee80211_rate.h
+@@ -81,6 +81,8 @@ struct ieee80211vap;
+
+ /* Multi-rare retry: 3 additional rate/retry pairs */
+ struct ieee80211_mrr {
++ int rate0;
++ int retries0;
+ int rate1;
+ int retries1;
+ int rate2;
+@@ -142,7 +144,7 @@ struct ieee80211_rate_ops {
+ * for packets that were successfully sent and for those that
+ * failed (consult the descriptor for details). */
+ void (*tx_complete)(struct ath_softc *sc, struct ath_node *an,
+- const struct ath_buf *bf);
++ const struct ath_buf *bf, const struct ieee80211_mrr *mrr);
+ };
+
+ struct ath_ratectrl {
+--- a/ath/if_ath.c
++++ b/ath/if_ath.c
+@@ -8634,6 +8634,8 @@ ath_tx_processq(struct ath_softc *sc, st
+
+ ni = bf->bf_node;
+ if (ni != NULL) {
++ struct ieee80211_mrr mrr;
++
+ an = ATH_NODE(ni);
+ if (ts->ts_status == 0) {
+ u_int8_t txant = ts->ts_antenna;
+@@ -8686,15 +8688,43 @@ ath_tx_processq(struct ath_softc *sc, st
+ lr = ts->ts_longretry;
+ sc->sc_stats.ast_tx_shortretry += sr;
+ sc->sc_stats.ast_tx_longretry += lr;
++ memset(&mrr, 0, sizeof(mrr));
++
++ switch(ah->ah_macType) {
++ case 5210:
++ case 5211:
++ goto skip_mrr;
++
++ case 5212:
++ mrr.rate0 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate;
++ mrr.rate1 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate;
++ mrr.rate2 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate;
++ mrr.rate3 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate;
++ break;
++
++ case 5416:
++ mrr.rate0 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate0)].ieeerate;
++ mrr.rate1 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate1)].ieeerate;
++ mrr.rate2 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate2)].ieeerate;
++ mrr.rate3 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate3)].ieeerate;
++ break;
++ }
++
++ mrr.retries0 = MS(ds->ds_ctl2, AR_XmitDataTries0);
++ mrr.retries1 = MS(ds->ds_ctl2, AR_XmitDataTries1);
++ mrr.retries2 = MS(ds->ds_ctl2, AR_XmitDataTries2);
++ mrr.retries3 = MS(ds->ds_ctl2, AR_XmitDataTries3);
++
+ /*
+ * Hand the descriptor to the rate control algorithm
+ * if the frame wasn't dropped for filtering or sent
+ * w/o waiting for an ack. In those cases the rssi
+ * and retry counts will be meaningless.
+ */
++skip_mrr:
+ if ((ts->ts_status & HAL_TXERR_FILT) == 0 &&
+ (bf->bf_flags & HAL_TXDESC_NOACK) == 0)
+- sc->sc_rc->ops->tx_complete(sc, an, bf);
++ sc->sc_rc->ops->tx_complete(sc, an, bf, &mrr);
+ }
+
+ bus_unmap_single(sc->sc_bdev, bf->bf_skbaddr,
+--- a/ath/if_athvar.h
++++ b/ath/if_athvar.h
+@@ -595,6 +595,46 @@ struct ath_vap {
+ (_tqs)->axq_link = NULL; \
+ } while (0)
+
++/*
++ * Definitions for pulling the rate and trie counts from
++ * a 5212 h/w descriptor. These Don't belong here; the
++ * driver should record this information so the rate control
++ * code doesn't go groveling around in the descriptor bits.
++ */
++#define ds_ctl2 ds_hw[0]
++#define ds_ctl3 ds_hw[1]
++
++/* TX ds_ctl3 */
++#define AR_XmitDataTries0 0x000f0000 /* series 0 max attempts */
++#define AR_XmitDataTries0_S 16
++#define AR_XmitDataTries1 0x00f00000 /* series 1 max attempts */
++#define AR_XmitDataTries1_S 20
++#define AR_XmitDataTries2 0x0f000000 /* series 2 max attempts */
++#define AR_XmitDataTries2_S 24
++#define AR_XmitDataTries3 0xf0000000 /* series 3 max attempts */
++#define AR_XmitDataTries3_S 28
++
++/* TX ds_ctl3 */
++#define AR_XmitRate0 0x0000001f /* series 0 tx rate */
++#define AR_XmitRate0_S 0
++#define AR_XmitRate1 0x000003e0 /* series 1 tx rate */
++#define AR_XmitRate1_S 5
++#define AR_XmitRate2 0x00007c00 /* series 2 tx rate */
++#define AR_XmitRate2_S 10
++#define AR_XmitRate3 0x000f8000 /* series 3 tx rate */
++#define AR_XmitRate3_S 15
++
++#define AR5416_XmitRate0 0x000000ff
++#define AR5416_XmitRate0_S 0
++#define AR5416_XmitRate1 0x0000ff00
++#define AR5416_XmitRate1_S 8
++#define AR5416_XmitRate2 0x00ff0000
++#define AR5416_XmitRate2_S 16
++#define AR5416_XmitRate3 0xff000000
++#define AR5416_XmitRate3_S 24
++
++#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
++
+ /*
+ * concat buffers from one queue to other
+ */
+--- a/ath_rate/amrr/amrr.c
++++ b/ath_rate/amrr/amrr.c
+@@ -123,7 +123,8 @@ ath_rate_get_mrr(struct ath_softc *sc, s
+
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+- struct ath_node *an, const struct ath_buf *bf)
++ struct ath_node *an, const struct ath_buf *bf,
++ const struct ieee80211_mrr *mrr)
+ {
+ struct amrr_node *amn = ATH_NODE_AMRR(an);
+ const struct ath_tx_status *ts = &bf->bf_dsstatus.ds_txstat;
+--- a/ath_rate/minstrel/minstrel.c
++++ b/ath_rate/minstrel/minstrel.c
+@@ -333,7 +333,8 @@ ath_rate_get_mrr(struct ath_softc *sc, s
+
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+- struct ath_node *an, const struct ath_buf *bf)
++ struct ath_node *an, const struct ath_buf *bf,
++ const struct ieee80211_mrr *mrr)
+ {
+ struct minstrel_node *sn = ATH_NODE_MINSTREL(an);
+ struct ieee80211com *ic = &sc->sc_ic;
+@@ -341,12 +342,9 @@ ath_rate_tx_complete(struct ath_softc *s
+ const struct ath_desc *ds = &bf->bf_desc[0];
+ int final_rate = 0;
+ int tries = 0;
+- int mrr;
++ int use_mrr;
+ int final_ndx;
+- int rate0, tries0, ndx0;
+- int rate1, tries1, ndx1;
+- int rate2, tries2, ndx2;
+- int rate3, tries3, ndx3;
++ int ndx0, ndx1, ndx2, ndx3;
+
+ /* This is the index in the retry chain we finish at.
+ * With no retransmits, it is always 0.
+@@ -376,9 +374,9 @@ ath_rate_tx_complete(struct ath_softc *s
+ if (!ts->ts_status) /* Success when sending a packet*/
+ sn->rs_ratesuccess[final_ndx]++;
+
+- mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
++ use_mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
+
+- if (!mrr) {
++ if (!use_mrr) {
+ if ((0 <= final_ndx) && (final_ndx < sn->num_rates)) {
+ sn->rs_rateattempts[final_ndx] += tries; /* only one rate was used */
+ }
+@@ -388,47 +386,36 @@ ath_rate_tx_complete(struct ath_softc *s
+ /* Now, query the hal/hardware to find out the contents of the multirate retry chain.
+ * If we have it set to 6,3,2,2, this call will always return 6,3,2,2. For some packets, we can
+ * get a mrr of 0, -1, -1, -1, which indicates there is no chain installed for that packet */
+- rate0 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate;
+- tries0 = MS(ds->ds_ctl2, AR_XmitDataTries0);
+- ndx0 = rate_to_ndx(sn, rate0);
++ ndx0 = rate_to_ndx(sn, mrr->rate0);
++ ndx1 = rate_to_ndx(sn, mrr->rate1);
++ ndx2 = rate_to_ndx(sn, mrr->rate2);
++ ndx3 = rate_to_ndx(sn, mrr->rate3);
+
+- rate1 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate;
+- tries1 = MS(ds->ds_ctl2, AR_XmitDataTries1);
+- ndx1 = rate_to_ndx(sn, rate1);
+-
+- rate2 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate;
+- tries2 = MS(ds->ds_ctl2, AR_XmitDataTries2);
+- ndx2 = rate_to_ndx(sn, rate2);
+-
+- rate3 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate;
+- tries3 = MS(ds->ds_ctl2, AR_XmitDataTries3);
+- ndx3 = rate_to_ndx(sn, rate3);
+-
+- sn->rs_rateattempts[ndx0] += MIN(tries, tries0);
+- if (tries <= tries0)
++ sn->rs_rateattempts[ndx0] += MIN(tries, mrr->retries0);
++ if (tries <= mrr->retries0)
+ return;
+
+- if (tries1 < 0)
++ if (mrr->retries1 < 0)
+ return;
+- tries = tries - tries0;
+- sn->rs_rateattempts[ndx1] += MIN(tries, tries1);
+- if (tries <= tries1)
++ tries = tries - mrr->retries0;
++ sn->rs_rateattempts[ndx1] += MIN(tries, mrr->retries1);
++ if (tries <= mrr->retries1)
+ return;
+
+ if (bf->rcflags)
+ sn->sample_count++;
+
+- if (tries2 < 0)
++ if (mrr->retries2 < 0)
+ return;
+- tries = tries - tries1;
+- sn->rs_rateattempts[ndx2] += MIN(tries, tries2);
+- if (tries <= tries2)
++ tries = tries - mrr->retries1;
++ sn->rs_rateattempts[ndx2] += MIN(tries, mrr->retries2);
++ if (tries <= mrr->retries2)
+ return;
+
+- if (tries3 < 0)
++ if (mrr->retries3 < 0)
+ return;
+- tries = tries - tries2;
+- sn->rs_rateattempts[ndx3] += MIN(tries, tries3);
++ tries = tries - mrr->retries2;
++ sn->rs_rateattempts[ndx3] += MIN(tries, mrr->retries3);
+ }
+
+ static void
+--- a/ath_rate/minstrel/minstrel.h
++++ b/ath_rate/minstrel/minstrel.h
+@@ -171,36 +171,6 @@ struct minstrel_node {
+
+ #define ATH_NODE_MINSTREL(an) ((struct minstrel_node *)&an[1])
+
+-/*
+- * Definitions for pulling the rate and trie counts from
+- * a 5212 h/w descriptor. These Don't belong here; the
+- * driver should record this information so the rate control
+- * code doesn't go groveling around in the descriptor bits.
+- */
+-#define ds_ctl2 ds_hw[0]
+-#define ds_ctl3 ds_hw[1]
+-
+-/* TX ds_ctl3 */
+-#define AR_XmitDataTries0 0x000f0000 /* series 0 max attempts */
+-#define AR_XmitDataTries0_S 16
+-#define AR_XmitDataTries1 0x00f00000 /* series 1 max attempts */
+-#define AR_XmitDataTries1_S 20
+-#define AR_XmitDataTries2 0x0f000000 /* series 2 max attempts */
+-#define AR_XmitDataTries2_S 24
+-#define AR_XmitDataTries3 0xf0000000 /* series 3 max attempts */
+-#define AR_XmitDataTries3_S 28
+-
+-/* TX ds_ctl3 */
+-#define AR_XmitRate0 0x0000001f /* series 0 tx rate */
+-#define AR_XmitRate0_S 0
+-#define AR_XmitRate1 0x000003e0 /* series 1 tx rate */
+-#define AR_XmitRate1_S 5
+-#define AR_XmitRate2 0x00007c00 /* series 2 tx rate */
+-#define AR_XmitRate2_S 10
+-#define AR_XmitRate3 0x000f8000 /* series 3 tx rate */
+-#define AR_XmitRate3_S 15
+-
+-#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
+ #endif /* _DEV_ATH_RATE_MINSTEL_H */
+
+ /* The comment below is magic for those who use emacs to edit this file. */
+--- a/ath_rate/onoe/onoe.c
++++ b/ath_rate/onoe/onoe.c
+@@ -137,7 +137,8 @@ ath_rate_get_mrr(struct ath_softc *sc, s
+
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+- struct ath_node *an, const struct ath_buf *bf)
++ struct ath_node *an, const struct ath_buf *bf,
++ const struct ieee80211_mrr *mrr)
+ {
+ struct onoe_node *on = ATH_NODE_ONOE(an);
+ const struct ath_tx_status *ts = &bf->bf_dsstatus.ds_txstat;
+--- a/ath_rate/sample/sample.c
++++ b/ath_rate/sample/sample.c
+@@ -178,10 +178,6 @@ static __inline int best_rate_ndx(struct
+ !sn->stats[size_bin][x].packets_acked))
+ continue;
+
+- /* 9 megabits never works better than 12 */
+- if (sn->rates[x].rate == 18)
+- continue;
+-
+ /* don't use a bit-rate that has been failing */
+ if (sn->stats[size_bin][x].successive_failures > 3)
+ continue;
+@@ -234,10 +230,6 @@ pick_sample_ndx(struct sample_node *sn,
+ if (sn->rates[ndx].rate > 22 && ndx > current_ndx + 2)
+ continue;
+
+- /* 9 megabits never works better than 12 */
+- if (sn->rates[ndx].rate == 18)
+- continue;
+-
+ /* if we're using 11 megabits, only sample up to 12 megabits
+ */
+ if (sn->rates[current_ndx].rate == 22 && ndx > current_ndx + 1)
+@@ -531,7 +523,8 @@ update_stats(struct ath_softc *sc, struc
+
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+- struct ath_node *an, const struct ath_buf *bf)
++ struct ath_node *an, const struct ath_buf *bf,
++ const struct ieee80211_mrr *mrr)
+ {
+ struct sample_node *sn = ATH_NODE_SAMPLE(an);
+ struct ieee80211com *ic = &sc->sc_ic;
+@@ -541,7 +534,7 @@ ath_rate_tx_complete(struct ath_softc *s
+ unsigned int short_tries;
+ unsigned int long_tries;
+ unsigned int frame_size;
+- unsigned int mrr;
++ unsigned int use_mrr;
+
+ final_rate = sc->sc_hwmap[ts->ts_rate &~ HAL_TXSTAT_ALTRATE].ieeerate;
+ short_tries = ts->ts_shortretry + 1;
+@@ -557,7 +550,7 @@ ath_rate_tx_complete(struct ath_softc *s
+ return;
+ }
+
+- mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
++ use_mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
+
+
+ if (sc->sc_mrretry && ts->ts_status) {
+@@ -566,22 +559,15 @@ ath_rate_tx_complete(struct ath_softc *s
+ dev_info,
+ MAC_ADDR(an->an_node.ni_macaddr),
+ bin_to_size(size_to_bin(frame_size)),
+- sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate,
+- MS(ds->ds_ctl2, AR_XmitDataTries0),
+- sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate,
+- MS(ds->ds_ctl2, AR_XmitDataTries1),
+- sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate,
+- MS(ds->ds_ctl2, AR_XmitDataTries2),
+- sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate,
+- MS(ds->ds_ctl2, AR_XmitDataTries3),
++ mrr->rate0,
++ mrr->rate1,
++ mrr->rate2,
++ mrr->rate3,
+ ts->ts_status ? "FAIL" : "OK",
+ short_tries, long_tries);
+ }
+
+- mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
+-
+-
+- if (!mrr || !(ts->ts_rate & HAL_TXSTAT_ALTRATE)) {
++ if (!use_mrr || !(ts->ts_rate & HAL_TXSTAT_ALTRATE)) {
+ /* only one rate was used */
+ int ndx = rate_to_ndx(sn, final_rate);
+ if ((ndx >= 0) && (ndx < sn->num_rates)) {
+@@ -593,7 +579,6 @@ ath_rate_tx_complete(struct ath_softc *s
+ short_tries, long_tries, ts->ts_status);
+ }
+ } else {
+- unsigned int rate[4], tries[4];
+ int ndx[4];
+ int finalTSIdx = ts->ts_finaltsi;
+
+@@ -601,21 +586,10 @@ ath_rate_tx_complete(struct ath_softc *s
+ * Process intermediate rates that failed.
+ */
+
+- rate[0] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate;
+- tries[0] = MS(ds->ds_ctl2, AR_XmitDataTries0);
+- ndx[0] = rate_to_ndx(sn, rate[0]);
+-
+- rate[1] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate;
+- tries[1] = MS(ds->ds_ctl2, AR_XmitDataTries1);
+- ndx[1] = rate_to_ndx(sn, rate[1]);
+-
+- rate[2] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate;
+- tries[2] = MS(ds->ds_ctl2, AR_XmitDataTries2);
+- ndx[2] = rate_to_ndx(sn, rate[2]);
+-
+- rate[3] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate;
+- tries[3] = MS(ds->ds_ctl2, AR_XmitDataTries3);
+- ndx[3] = rate_to_ndx(sn, rate[3]);
++ ndx[0] = rate_to_ndx(sn, mrr->rate0);
++ ndx[1] = rate_to_ndx(sn, mrr->rate1);
++ ndx[2] = rate_to_ndx(sn, mrr->rate2);
++ ndx[3] = rate_to_ndx(sn, mrr->rate3);
+
+ #if 0
+ DPRINTF(sc, ATH_DEBUG_RATE, "%s: " MAC_FMT " size %u finaltsidx %u tries %u status %u rate/try %u/%u %u/%u %u/%u %u/%u\n",
+@@ -636,43 +610,43 @@ ath_rate_tx_complete(struct ath_softc *s
+ * sample higher rates 1 try at a time doing so
+ * may unfairly penalize them.
+ */
+- if (tries[0] && ndx[0] >= 0) {
++ if (mrr->retries0 && ndx[0] >= 0) {
+ update_stats(sc, an, frame_size,
+- ndx[0], tries[0],
+- ndx[1], tries[1],
+- ndx[2], tries[2],
+- ndx[3], tries[3],
++ ndx[0], mrr->retries0,
++ ndx[1], mrr->retries1,
++ ndx[2], mrr->retries2,
++ ndx[3], mrr->retries3,
+ short_tries, long_tries,
+- long_tries > tries[0]);
+- long_tries -= tries[0];
++ long_tries > mrr->retries0);
++ long_tries -= mrr->retries0;
+
+ }
+
+- if (tries[1] && ndx[1] >= 0 && finalTSIdx > 0) {
++ if (mrr->retries1 && ndx[1] >= 0 && finalTSIdx > 0) {
+ update_stats(sc, an, frame_size,
+- ndx[1], tries[1],
+- ndx[2], tries[2],
+- ndx[3], tries[3],
++ ndx[1], mrr->retries1,
++ ndx[2], mrr->retries2,
++ ndx[3], mrr->retries3,
+ 0, 0,
+ short_tries, long_tries,
+ ts->ts_status);
+- long_tries -= tries[1];
++ long_tries -= mrr->retries1;
+ }
+
+- if (tries[2] && ndx[2] >= 0 && finalTSIdx > 1) {
++ if (mrr->retries2 && ndx[2] >= 0 && finalTSIdx > 1) {
+ update_stats(sc, an, frame_size,
+- ndx[2], tries[2],
+- ndx[3], tries[3],
++ ndx[2], mrr->retries2,
++ ndx[3], mrr->retries3,
+ 0, 0,
+ 0, 0,
+ short_tries, long_tries,
+ ts->ts_status);
+- long_tries -= tries[2];
++ long_tries -= mrr->retries2;
+ }
+
+- if (tries[3] && ndx[3] >= 0 && finalTSIdx > 2) {
++ if (mrr->retries3 && ndx[3] >= 0 && finalTSIdx > 2) {
+ update_stats(sc, an, frame_size,
+- ndx[3], tries[3],
++ ndx[3], mrr->retries3,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+--- a/ath_rate/sample/sample.h
++++ b/ath_rate/sample/sample.h
+@@ -98,36 +98,4 @@ struct sample_node {
+ };
+ #define ATH_NODE_SAMPLE(an) ((struct sample_node *)&an[1])
+
+-
+-/*
+- * Definitions for pulling the rate and trie counts from
+- * a 5212 h/w descriptor. These Don't belong here; the
+- * driver should record this information so the rate control
+- * code doesn't go groveling around in the descriptor bits.
+- */
+-#define ds_ctl2 ds_hw[0]
+-#define ds_ctl3 ds_hw[1]
+-
+-/* TX ds_ctl3 */
+-#define AR_XmitDataTries0 0x000f0000 /* series 0 max attempts */
+-#define AR_XmitDataTries0_S 16
+-#define AR_XmitDataTries1 0x00f00000 /* series 1 max attempts */
+-#define AR_XmitDataTries1_S 20
+-#define AR_XmitDataTries2 0x0f000000 /* series 2 max attempts */
+-#define AR_XmitDataTries2_S 24
+-#define AR_XmitDataTries3 0xf0000000 /* series 3 max attempts */
+-#define AR_XmitDataTries3_S 28
+-
+-/* TX ds_ctl3 */
+-#define AR_XmitRate0 0x0000001f /* series 0 tx rate */
+-#define AR_XmitRate0_S 0
+-#define AR_XmitRate1 0x000003e0 /* series 1 tx rate */
+-#define AR_XmitRate1_S 5
+-#define AR_XmitRate2 0x00007c00 /* series 2 tx rate */
+-#define AR_XmitRate2_S 10
+-#define AR_XmitRate3 0x000f8000 /* series 3 tx rate */
+-#define AR_XmitRate3_S 15
+-
+-#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
+-
+ #endif /* _DEV_ATH_RATE_SAMPLE_H */
projects / openwrt / staging / hauke.git / commitdiff