if (!memcmp(&pmlmepriv->cur_network.network.MacAddress, bssid,
ETH_ALEN)) {
if (!check_fwstate(pmlmepriv, WIFI_STATION_STATE))
- goto _Abort_Set_BSSID; /* driver is in
- * WIFI_ADHOC_MASTER_STATE
- */
+ /* driver is in
+ * WIFI_ADHOC_MASTER_STATE
+ */
+ goto _Abort_Set_BSSID;
} else {
r8712_disassoc_cmd(padapter);
if (check_fwstate(pmlmepriv, _FW_LINKED))
WIFI_ADHOC_STATE);
}
} else {
- goto _Abort_Set_SSID; /* driver is in
- * WIFI_ADHOC_MASTER_STATE
- */
+ /* driver is in
+ * WIFI_ADHOC_MASTER_STATE
+ */
+ goto _Abort_Set_SSID;
}
}
} else {
}
-/*
- return the wlan_network with the matching addr
- Shall be called under atomic context...
- to avoid possible racing condition...
-*/
+/* return the wlan_network with the matching addr
+ * Shall be called under atomic context...
+ * to avoid possible racing condition...
+ */
static struct wlan_network *_r8712_find_network(struct __queue *scanned_queue,
u8 *addr)
{
}
/*
- return the wlan_network with the matching addr
-
- Shall be called under atomic context...
- to avoid possible racing condition...
-*/
+ * return the wlan_network with the matching addr
+ * Shall be called under atomic context...
+ * to avoid possible racing condition...
+ */
static struct wlan_network *r8712_find_network(struct __queue *scanned_queue,
u8 *addr)
{
}
}
-/*
-Caller must hold pmlmepriv->lock first.
-*/
+/* Caller must hold pmlmepriv->lock first */
static void update_scanned_network(struct _adapter *adapter,
struct wlan_bssid_ex *target)
{
}
/*
-*r8712_indicate_connect: the caller has to lock pmlmepriv->lock
-*/
+ * r8712_indicate_connect: the caller has to lock pmlmepriv->lock
+ */
void r8712_indicate_connect(struct _adapter *padapter)
{
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
/*
-*r8712_ind_disconnect: the caller has to lock pmlmepriv->lock
-*/
+ * r8712_ind_disconnect: the caller has to lock pmlmepriv->lock
+ */
void r8712_ind_disconnect(struct _adapter *padapter)
{
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
}
/*
-Caller: r8712_cmd_thread
-
-Check if the fw_pwrstate is okay for issuing cmd.
-If not (cpwm should be is less than P2 state), then the sub-routine
-will raise the cpwm to be greater than or equal to P2.
-
-Calling Context: Passive
-
-Return Value:
-
-_SUCCESS: r8712_cmd_thread can issue cmds to firmware afterwards.
-_FAIL: r8712_cmd_thread can not do anything.
-*/
+ * Caller: r8712_cmd_thread
+ * Check if the fw_pwrstate is okay for issuing cmd.
+ * If not (cpwm should be is less than P2 state), then the sub-routine
+ * will raise the cpwm to be greater than or equal to P2.
+ * Calling Context: Passive
+ * Return Value:
+ * _SUCCESS: r8712_cmd_thread can issue cmds to firmware afterwards.
+ * _FAIL: r8712_cmd_thread can not do anything.
+ */
sint r8712_register_cmd_alive(struct _adapter *padapter)
{
uint res = _SUCCESS;
}
/*
-Caller: ISR
-
-If ISR's txdone,
-No more pkts for TX,
-Then driver shall call this fun. to power down firmware again.
-*/
-
+ * Caller: ISR
+ * If ISR's txdone,
+ * No more pkts for TX,
+ * Then driver shall call this fun. to power down firmware again.
+ */
void r8712_unregister_cmd_alive(struct _adapter *padapter)
{
struct pwrctrl_priv *pwrctrl = &padapter->pwrctrlpriv;
}
/*
-caller : defrag; recvframe_chk_defrag in recv_thread (passive)
-pframequeue: defrag_queue : will be accessed in recv_thread (passive)
-
-using spin_lock to protect
-
-*/
-
+ * caller : defrag; recvframe_chk_defrag in recv_thread (passive)
+ * pframequeue: defrag_queue : will be accessed in recv_thread (passive)
+ * using spin_lock to protect
+ */
void r8712_free_recvframe_queue(struct __queue *pframequeue,
struct __queue *pfree_recv_queue)
{
}
/*
- Need to consider the fragment situation
-*/
+ * Need to consider the fragment situation
+ */
void r8712_wep_encrypt(struct _adapter *padapter, u8 *pxmitframe)
{ /* exclude ICV */
unsigned char crc[4];
};
/*
-**********************************************************************
-* Routine: Phase 1 -- generate P1K, given TA, TK, IV32
-*
-* Inputs:
-* tk[] = temporal key [128 bits]
-* ta[] = transmitter's MAC address [ 48 bits]
-* iv32 = upper 32 bits of IV [ 32 bits]
-* Output:
-* p1k[] = Phase 1 key [ 80 bits]
-*
-* Note:
-* This function only needs to be called every 2**16 packets,
-* although in theory it could be called every packet.
-*
-**********************************************************************
-*/
+ **********************************************************************
+ * Routine: Phase 1 -- generate P1K, given TA, TK, IV32
+ *
+ * Inputs:
+ * tk[] = temporal key [128 bits]
+ * ta[] = transmitter's MAC address [ 48 bits]
+ * iv32 = upper 32 bits of IV [ 32 bits]
+ * Output:
+ * p1k[] = Phase 1 key [ 80 bits]
+ *
+ * Note:
+ * This function only needs to be called every 2**16 packets,
+ * although in theory it could be called every packet.
+ *
+ **********************************************************************
+ */
static void phase1(u16 *p1k, const u8 *tk, const u8 *ta, u32 iv32)
{
sint i;
}
/*
-**********************************************************************
-* Routine: Phase 2 -- generate RC4KEY, given TK, P1K, IV16
-*
-* Inputs:
-* tk[] = Temporal key [128 bits]
-* p1k[] = Phase 1 output key [ 80 bits]
-* iv16 = low 16 bits of IV counter [ 16 bits]
-* Output:
-* rc4key[] = the key used to encrypt the packet [128 bits]
-*
-* Note:
-* The value {TA,IV32,IV16} for Phase1/Phase2 must be unique
-* across all packets using the same key TK value. Then, for a
-* given value of TK[], this TKIP48 construction guarantees that
-* the final RC4KEY value is unique across all packets.
-*
-* Suggested implementation optimization: if PPK[] is "overlaid"
-* appropriately on RC4KEY[], there is no need for the final
-* for loop below that copies the PPK[] result into RC4KEY[].
-*
-**********************************************************************
-*/
+ **********************************************************************
+ * Routine: Phase 2 -- generate RC4KEY, given TK, P1K, IV16
+ *
+ * Inputs:
+ * tk[] = Temporal key [128 bits]
+ * p1k[] = Phase 1 output key [ 80 bits]
+ * iv16 = low 16 bits of IV counter [ 16 bits]
+ * Output:
+ * rc4key[] = the key used to encrypt the packet [128 bits]
+ *
+ * Note:
+ * The value {TA,IV32,IV16} for Phase1/Phase2 must be unique
+ * across all packets using the same key TK value. Then, for a
+ * given value of TK[], this TKIP48 construction guarantees that
+ * the final RC4KEY value is unique across all packets.
+ *
+ * Suggested implementation optimization: if PPK[] is "overlaid"
+ * appropriately on RC4KEY[], there is no need for the final
+ * for loop below that copies the PPK[] result into RC4KEY[].
+ *
+ **********************************************************************
+ */
static void phase2(u8 *rc4key, const u8 *tk, const u16 *p1k, u16 iv16)
{
sint i;
memset((unsigned char *)pxmitpriv, 0, sizeof(struct xmit_priv));
spin_lock_init(&pxmitpriv->lock);
/*
- Please insert all the queue initialization using _init_queue below
- */
+ *Please insert all the queue initialization using _init_queue below
+ */
pxmitpriv->adapter = padapter;
_init_queue(&pxmitpriv->be_pending);
_init_queue(&pxmitpriv->bk_pending);
_init_queue(&pxmitpriv->apsd_queue);
_init_queue(&pxmitpriv->free_xmit_queue);
/*
- Please allocate memory with the sz = (struct xmit_frame) * NR_XMITFRAME,
- and initialize free_xmit_frame below.
- Please also apply free_txobj to link_up all the xmit_frames...
- */
+ * Please allocate memory with the sz = (struct xmit_frame) * NR_XMITFRAME,
+ * and initialize free_xmit_frame below.
+ * Please also apply free_txobj to link_up all the xmit_frames...
+ */
pxmitpriv->pallocated_frame_buf = kmalloc(NR_XMITFRAME * sizeof(struct xmit_frame) + 4,
GFP_ATOMIC);
if (!pxmitpriv->pallocated_frame_buf) {
}
pxmitpriv->free_xmitframe_cnt = NR_XMITFRAME;
/*
- init xmit hw_txqueue
- */
+ * init xmit hw_txqueue
+ */
_r8712_init_hw_txqueue(&pxmitpriv->be_txqueue, BE_QUEUE_INX);
_r8712_init_hw_txqueue(&pxmitpriv->bk_txqueue, BK_QUEUE_INX);
_r8712_init_hw_txqueue(&pxmitpriv->vi_txqueue, VI_QUEUE_INX);
}
/*
-Calling context:
-1. OS_TXENTRY
-2. RXENTRY (rx_thread or RX_ISR/RX_CallBack)
-
-If we turn on USE_RXTHREAD, then, no need for critical section.
-Otherwise, we must use _enter/_exit critical to protect free_xmit_queue...
-
-Must be very very cautious...
-
-*/
-
+ * Calling context:
+ * 1. OS_TXENTRY
+ * 2. RXENTRY (rx_thread or RX_ISR/RX_CallBack)
+ *
+ * If we turn on USE_RXTHREAD, then, no need for critical section.
+ * Otherwise, we must use _enter/_exit critical to protect free_xmit_queue...
+ *
+ * Must be very very cautious...
+ *
+ */
struct xmit_frame *r8712_alloc_xmitframe(struct xmit_priv *pxmitpriv)
{
/*
- Please remember to use all the osdep_service api,
- and lock/unlock or _enter/_exit critical to protect
- pfree_xmit_queue
- */
+ * Please remember to use all the osdep_service api,
+ * and lock/unlock or _enter/_exit critical to protect
+ * pfree_xmit_queue
+ */
unsigned long irqL;
struct xmit_frame *pxframe;
struct __queue *pfree_xmit_queue = &pxmitpriv->free_xmit_queue;
projects / openwrt / staging / blogic.git / commitdiff