Move up dependency versions in user guide

Move up the version numbers in the user guide of:

 * DS-5 (to v5.21)
 * EDK2 (to v3.0)
 * Linux Kernel (to 1.6-Juno)
 * Linaro file-system (to 15.03)
 * Juno SCP binary (to v1.7.0 within board recovery image 0.11.3).

Change-Id: Ieb09e633acc2b33823ddf35f77f44e7da60b99ba

diff --git a/docs/user-guide.md b/docs/user-guide.md
index 00feacc5d5fea73cdc5d1da9b53eeb22f6664813..c1cadbbe8cbd9a7f359e1d74811b9a45a34cbe4c 100644 (file)
--- a/docs/user-guide.md
+++ b/docs/user-guide.md
@@ -62,7 +62,7 @@ The following tools are required to use the ARM Trusted Firmware:
 *   `libssl-dev` package to build the certificate generation tool when support
     for Trusted Board Boot is needed.
 
-*   (Optional) For debugging, ARM [Development Studio 5 (DS-5)][DS-5] v5.20.
+*   (Optional) For debugging, ARM [Development Studio 5 (DS-5)][DS-5] v5.21.
 
 
 4.  Building the Trusted Firmware
@@ -546,7 +546,7 @@ Juno platform, follow these steps:
 
         cd edk2
         git remote add -f --tags arm-software https://github.com/ARM-software/edk2.git
-        git checkout --detach v2.1-rc0
+        git checkout --detach v3.0
 
 2.  Copy build config templates to local workspace
 
@@ -625,7 +625,7 @@ Preparing a Linux kernel for use on the FVPs can be done as follows
 
         cd linux
         git remote add -f --tags arm-software https://github.com/ARM-software/linux.git
-        git checkout --detach 1.3-Juno
+        git checkout --detach 1.6-Juno
 
 2.  Build with the Linaro GCC tools.
 
@@ -700,8 +700,8 @@ To prepare a VirtioBlock file-system, do the following:
 
     NOTE: The unpacked disk image grows to 3 GiB in size.
 
-        wget http://releases.linaro.org/14.12/openembedded/aarch64/vexpress64-openembedded_lamp-armv8-gcc-4.9_20141211-701.img.gz
-        gunzip vexpress64-openembedded_lamp-armv8-gcc-4.9_20141211-701.img.gz
+        wget http://releases.linaro.org/15.03/members/arm/openembedded/aarch64/vexpress64-openembedded_lamp-armv8-gcc-4.9_20150324-715.img.gz
+        gunzip vexpress64-openembedded_lamp-armv8-gcc-4.9_20150324-715.img.gz
 
 2.  Make sure the Linux kernel has Virtio support enabled using
     `make ARCH=arm64 menuconfig`.
@@ -763,14 +763,14 @@ To prepare a RAM-disk root file-system, do the following:
 
 1.  Download the file-system image:
 
-        wget http://releases.linaro.org/14.12/openembedded/aarch64/linaro-image-lamp-genericarmv8-20141212-729.rootfs.tar.gz
+        wget http://releases.linaro.org/15.03/members/arm/openembedded/aarch64/linaro-image-lamp-genericarmv8-20150323-747.rootfs.tar.gz
 
 2.  Modify the Linaro image:
 
         # Prepare for use as RAM-disk. Normally use MMC, NFS or VirtioBlock.
         # Be careful, otherwise you could damage your host file-system.
         mkdir tmp; cd tmp
-        sudo sh -c "zcat ../linaro-image-lamp-genericarmv8-20141212-729.rootfs.tar.gz | cpio -id"
+        sudo sh -c "zcat ../linaro-image-lamp-genericarmv8-20150323-747.rootfs.tar.gz | cpio -id"
         sudo ln -s sbin/init .
         sudo sh -c "echo 'devtmpfs /dev devtmpfs mode=0755,nosuid 0 0' >> etc/fstab"
         sudo sh -c "find . | cpio --quiet -H newc -o | gzip -3 -n > ../filesystem.cpio.gz"
@@ -1068,10 +1068,19 @@ have an earlier version installed or are unsure which version is installed,
 follow the recovery image update instructions in the [Juno Software Guide]
 on the [ARM Connected Community] website.
 
-The Juno platform requires a BL3-0 image to boot up. This image contains the
-runtime firmware that runs on the SCP (System Control Processor). This image is
-embedded within the [Juno Board Recovery Image] but can also be
-[downloaded directly][Juno SCP Firmware].
+Note that you must use the board recovery image provided in the Juno R1 Initial
+Alpha release, even for Juno R0. This is because the Trusted Firmware now
+supports the new [SCPI v1.0 final protocol][Juno SCP Protocols v1.0]
+exclusively, which is not compatible with the SCP firmware provided in the
+latest Juno R0 release. Although the Juno R1 Initial Alpha release is generally
+not recommended for use with Juno R0 boards, it is suitable for Trusted Firmware
+development.
+
+The Juno platform requires a BL0 and a BL3-0 image to boot up. The BL0 image
+contains the ROM firmware that runs on the SCP (System Control Processor),
+whereas the BL3-0 image contains the SCP Runtime firmware. Both images are
+embedded within the [Juno Board Recovery Image] but they can also be downloaded
+directly: [Juno SCP ROM Firmware] and [Juno SCP Runtime Firmware].
 
 Rebuild the Trusted Firmware specifying the BL3-0 image. Refer to the section
 "Building the Trusted Firmware". Alternatively, the FIP image can be updated
@@ -1083,7 +1092,7 @@ manually with the BL3-0 image:
 
 Juno's device tree blob is built along with the kernel. It is located in:
 
-    <path-to-linux>/arch/arm64/boot/dts/juno.dtb
+    <path-to-linux>/arch/arm64/boot/dts/arm/juno.dtb
 
 ### Other Juno software information
 
@@ -1104,8 +1113,10 @@ _Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved._
 [ARM FVP website]:             http://www.arm.com/fvp
 [ARM Connected Community]:     http://community.arm.com
 [Juno Software Guide]:         http://community.arm.com/docs/DOC-8396
-[Juno Board Recovery Image]:   http://community.arm.com/servlet/JiveServlet/download/9427-1-15432/board_recovery_image_0.10.1.zip
-[Juno SCP Firmware]:           http://community.arm.com/servlet/JiveServlet/download/9427-1-15422/bl30.bin.zip
+[Juno Board Recovery Image]:   http://community.arm.com/servlet/JiveServlet/download/10177-1-18236/board_recovery_image_0.11.3.zip
+[Juno SCP ROM Firmware]:       http://community.arm.com/servlet/JiveServlet/download/10177-1-18187/bl0.bin.zip
+[Juno SCP Runtime Firmware]:   http://community.arm.com/servlet/JiveServlet/download/10177-1-18193/bl30.bin.zip
+[Juno SCP Protocols v1.0]:     http://community.arm.com/servlet/JiveServlet/download/8401-40-18262/DUI0922A_scp_message_interface.pdf
 [Linaro Toolchain]:            http://releases.linaro.org/14.07/components/toolchain/binaries/
 [EDK2]:                        http://github.com/tianocore/edk2
 [DS-5]:                        http://www.arm.com/products/tools/software-tools/ds-5/index.php