static INT CorruptISOSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal);
static INT SaveHeaderIfPresent(struct bcm_mini_adapter *Adapter, PUCHAR pBuff, UINT uiSectAlignAddr);
static INT WriteToFlashWithoutSectorErase(struct bcm_mini_adapter *Adapter, PUINT pBuff,
- FLASH2X_SECTION_VAL eFlash2xSectionVal,
- UINT uiOffset, UINT uiNumBytes);
+ FLASH2X_SECTION_VAL eFlash2xSectionVal,
+ UINT uiOffset, UINT uiNumBytes);
static FLASH2X_SECTION_VAL getHighestPriDSD(struct bcm_mini_adapter *Adapter);
static FLASH2X_SECTION_VAL getHighestPriISO(struct bcm_mini_adapter *Adapter);
static INT GetFlashBaseAddr(struct bcm_mini_adapter *Adapter);
-static INT ReadBeceemEEPROMBulk(struct bcm_mini_adapter *Adapter,UINT dwAddress, UINT *pdwData, UINT dwNumData);
+static INT ReadBeceemEEPROMBulk(struct bcm_mini_adapter *Adapter, UINT dwAddress, UINT *pdwData, UINT dwNumData);
// Procedure: ReadEEPROMStatusRegister
//
//
//-----------------------------------------------------------------------------
-static UCHAR ReadEEPROMStatusRegister(struct bcm_mini_adapter *Adapter )
+static UCHAR ReadEEPROMStatusRegister(struct bcm_mini_adapter *Adapter)
{
UCHAR uiData = 0;
- DWORD dwRetries = MAX_EEPROM_RETRIES*RETRIES_PER_DELAY;
+ DWORD dwRetries = MAX_EEPROM_RETRIES * RETRIES_PER_DELAY;
UINT uiStatus = 0;
UINT value = 0;
UINT value1 = 0;
/* Read the EEPROM status register */
- value = EEPROM_READ_STATUS_REGISTER ;
- wrmalt( Adapter, EEPROM_CMDQ_SPI_REG, &value, sizeof(value));
+ value = EEPROM_READ_STATUS_REGISTER;
+ wrmalt(Adapter, EEPROM_CMDQ_SPI_REG, &value, sizeof(value));
- while ( dwRetries != 0 )
+ while (dwRetries != 0)
{
- value=0;
- uiStatus = 0 ;
+ value = 0;
+ uiStatus = 0;
rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
- if(Adapter->device_removed == TRUE)
+ if (Adapter->device_removed == TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Modem has got removed hence exiting....");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Modem has got removed hence exiting....");
break;
}
/* Wait for Avail bit to be set. */
- if ( ( uiStatus & EEPROM_READ_DATA_AVAIL) != 0 )
+ if ((uiStatus & EEPROM_READ_DATA_AVAIL) != 0)
{
/* Clear the Avail/Full bits - which ever is set. */
value = uiStatus & (EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL);
- wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
+ wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
- value =0;
+ value = 0;
rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
uiData = (UCHAR)value;
break;
}
- dwRetries-- ;
- if ( dwRetries == 0 )
+ dwRetries--;
+ if (dwRetries == 0)
{
- rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
- rdmalt(Adapter, EEPROM_SPI_Q_STATUS_REG, &value1, sizeof(value1));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"0x3004 = %x 0x3008 = %x, retries = %d failed.\n",value,value1, MAX_EEPROM_RETRIES*RETRIES_PER_DELAY);
+ rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
+ rdmalt(Adapter, EEPROM_SPI_Q_STATUS_REG, &value1, sizeof(value1));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "0x3004 = %x 0x3008 = %x, retries = %d failed.\n", value, value1, MAX_EEPROM_RETRIES * RETRIES_PER_DELAY);
return uiData;
}
- if( !(dwRetries%RETRIES_PER_DELAY) )
+ if (!(dwRetries%RETRIES_PER_DELAY))
msleep(1);
uiStatus = 0 ;
}
//-----------------------------------------------------------------------------
INT ReadBeceemEEPROMBulk(struct bcm_mini_adapter *Adapter,
- DWORD dwAddress,
- DWORD *pdwData,
- DWORD dwNumWords
- )
+ DWORD dwAddress,
+ DWORD *pdwData,
+ DWORD dwNumWords)
{
DWORD dwIndex = 0;
- DWORD dwRetries = MAX_EEPROM_RETRIES*RETRIES_PER_DELAY;
+ DWORD dwRetries = MAX_EEPROM_RETRIES * RETRIES_PER_DELAY;
UINT uiStatus = 0;
- UINT value= 0;
+ UINT value = 0;
UINT value1 = 0;
UCHAR *pvalue;
/* Flush the read and cmd queue. */
- value=( EEPROM_READ_QUEUE_FLUSH | EEPROM_CMD_QUEUE_FLUSH );
- wrmalt( Adapter, SPI_FLUSH_REG, &value, sizeof(value) );
- value=0;
- wrmalt( Adapter, SPI_FLUSH_REG, &value, sizeof(value));
+ value = (EEPROM_READ_QUEUE_FLUSH | EEPROM_CMD_QUEUE_FLUSH);
+ wrmalt(Adapter, SPI_FLUSH_REG, &value, sizeof(value));
+ value = 0;
+ wrmalt(Adapter, SPI_FLUSH_REG, &value, sizeof(value));
/* Clear the Avail/Full bits. */
- value=( EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL );
- wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG,&value, sizeof(value));
-
- value= dwAddress | ( (dwNumWords == 4) ? EEPROM_16_BYTE_PAGE_READ : EEPROM_4_BYTE_PAGE_READ );
- wrmalt( Adapter, EEPROM_CMDQ_SPI_REG, &value, sizeof(value));
+ value = (EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL);
+ wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
- while ( dwRetries != 0 )
- {
+ value = dwAddress | ((dwNumWords == 4) ? EEPROM_16_BYTE_PAGE_READ : EEPROM_4_BYTE_PAGE_READ);
+ wrmalt(Adapter, EEPROM_CMDQ_SPI_REG, &value, sizeof(value));
+ while (dwRetries != 0)
+ {
uiStatus = 0;
rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
- if(Adapter->device_removed == TRUE)
+ if (Adapter->device_removed == TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Modem has got Removed.hence exiting from loop...");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Modem has got Removed.hence exiting from loop...");
return -ENODEV;
}
/* If we are reading 16 bytes we want to be sure that the queue
* is full before we read. In the other cases we are ok if the
* queue has data available */
- if ( dwNumWords == 4 )
+ if (dwNumWords == 4)
{
- if ( ( uiStatus & EEPROM_READ_DATA_FULL ) != 0 )
+ if ((uiStatus & EEPROM_READ_DATA_FULL) != 0)
{
/* Clear the Avail/Full bits - which ever is set. */
- value = ( uiStatus & (EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL) ) ;
- wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG,&value, sizeof(value));
+ value = (uiStatus & (EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL));
+ wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
break;
}
}
- else if ( dwNumWords == 1 )
+ else if (dwNumWords == 1)
{
-
- if ( ( uiStatus & EEPROM_READ_DATA_AVAIL ) != 0 )
+ if ((uiStatus & EEPROM_READ_DATA_AVAIL) != 0)
{
/* We just got Avail and we have to read 32bits so we
* need this sleep for Cardbus kind of devices. */
- if (Adapter->chip_id == 0xBECE0210 )
- udelay(800);
+ if (Adapter->chip_id == 0xBECE0210)
+ udelay(800);
/* Clear the Avail/Full bits - which ever is set. */
- value=( uiStatus & (EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL) );
- wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG,&value, sizeof(value));
+ value = (uiStatus & (EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL));
+ wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
break;
}
}
uiStatus = 0;
dwRetries--;
- if(dwRetries == 0)
+ if (dwRetries == 0)
{
- value=0;
- value1=0;
+ value = 0;
+ value1 = 0;
rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
rdmalt(Adapter, EEPROM_SPI_Q_STATUS_REG, &value1, sizeof(value1));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "dwNumWords %d 0x3004 = %x 0x3008 = %x retries = %d failed.\n", dwNumWords, value, value1, MAX_EEPROM_RETRIES*RETRIES_PER_DELAY);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "dwNumWords %d 0x3004 = %x 0x3008 = %x retries = %d failed.\n",
+ dwNumWords, value, value1, MAX_EEPROM_RETRIES * RETRIES_PER_DELAY);
return STATUS_FAILURE;
}
- if( !(dwRetries%RETRIES_PER_DELAY) )
+
+ if (!(dwRetries%RETRIES_PER_DELAY))
msleep(1);
}
- for ( dwIndex = 0; dwIndex < dwNumWords ; dwIndex++ )
+ for (dwIndex = 0; dwIndex < dwNumWords; dwIndex++)
{
/* We get only a byte at a time - from LSB to MSB. We shift it into an integer. */
pvalue = (PUCHAR)(pdwData + dwIndex);
- value =0;
+ value = 0;
rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
pvalue[0] = value;
pvalue[1] = value;
- value =0;
+ value = 0;
rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
pvalue[2] = value;
//-----------------------------------------------------------------------------
INT ReadBeceemEEPROM(struct bcm_mini_adapter *Adapter,
- DWORD uiOffset,
- DWORD *pBuffer
- )
+ DWORD uiOffset,
+ DWORD *pBuffer)
{
- UINT uiData[8] = {0};
+ UINT uiData[8] = {0};
UINT uiByteOffset = 0;
UINT uiTempOffset = 0;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL," ====> ");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, " ====> ");
uiTempOffset = uiOffset - (uiOffset % MAX_RW_SIZE);
uiByteOffset = uiOffset - uiTempOffset;
/* A word can overlap at most over 2 pages. In that case we read the
* next page too. */
- if ( uiByteOffset > 12 )
+ if (uiByteOffset > 12)
{
ReadBeceemEEPROMBulk(Adapter, uiTempOffset + MAX_RW_SIZE, (PUINT)&uiData[4], 4);
}
- memcpy( (PUCHAR) pBuffer, ( ((PUCHAR)&uiData[0]) + uiByteOffset ), 4);
+ memcpy((PUCHAR)pBuffer, (((PUCHAR)&uiData[0]) + uiByteOffset), 4);
return STATUS_SUCCESS;
} /* ReadBeceemEEPROM() */
-
-
INT ReadMacAddressFromNVM(struct bcm_mini_adapter *Adapter)
{
INT Status;
INIT_PARAMS_1_MACADDRESS_ADDRESS,
MAC_ADDRESS_SIZE);
- if(Status == STATUS_SUCCESS)
+ if (Status == STATUS_SUCCESS)
memcpy(Adapter->dev->dev_addr, puMacAddr, MAC_ADDRESS_SIZE);
return Status;
// <FAILURE> - if failed.
//-----------------------------------------------------------------------------
-INT BeceemEEPROMBulkRead(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- UINT uiOffset,
- UINT uiNumBytes)
+INT BeceemEEPROMBulkRead(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes)
{
- UINT uiData[4] = {0};
- //UINT uiAddress = 0;
- UINT uiBytesRemaining = uiNumBytes;
- UINT uiIndex = 0;
- UINT uiTempOffset = 0;
- UINT uiExtraBytes = 0;
- UINT uiFailureRetries = 0;
+ UINT uiData[4] = {0};
+ // UINT uiAddress = 0;
+ UINT uiBytesRemaining = uiNumBytes;
+ UINT uiIndex = 0;
+ UINT uiTempOffset = 0;
+ UINT uiExtraBytes = 0;
+ UINT uiFailureRetries = 0;
PUCHAR pcBuff = (PUCHAR)pBuffer;
-
- if(uiOffset%MAX_RW_SIZE&& uiBytesRemaining)
+ if (uiOffset % MAX_RW_SIZE && uiBytesRemaining)
{
- uiTempOffset = uiOffset - (uiOffset%MAX_RW_SIZE);
- uiExtraBytes = uiOffset-uiTempOffset;
- ReadBeceemEEPROMBulk(Adapter,uiTempOffset,(PUINT)&uiData[0],4);
- if(uiBytesRemaining >= (MAX_RW_SIZE - uiExtraBytes))
+ uiTempOffset = uiOffset - (uiOffset % MAX_RW_SIZE);
+ uiExtraBytes = uiOffset - uiTempOffset;
+ ReadBeceemEEPROMBulk(Adapter, uiTempOffset, (PUINT)&uiData[0], 4);
+ if (uiBytesRemaining >= (MAX_RW_SIZE - uiExtraBytes))
{
- memcpy(pBuffer,(((PUCHAR)&uiData[0])+uiExtraBytes),MAX_RW_SIZE - uiExtraBytes);
-
+ memcpy(pBuffer, (((PUCHAR)&uiData[0]) + uiExtraBytes), MAX_RW_SIZE - uiExtraBytes);
uiBytesRemaining -= (MAX_RW_SIZE - uiExtraBytes);
uiIndex += (MAX_RW_SIZE - uiExtraBytes);
uiOffset += (MAX_RW_SIZE - uiExtraBytes);
}
else
{
- memcpy(pBuffer,(((PUCHAR)&uiData[0])+uiExtraBytes),uiBytesRemaining);
+ memcpy(pBuffer, (((PUCHAR)&uiData[0]) + uiExtraBytes), uiBytesRemaining);
uiIndex += uiBytesRemaining;
uiOffset += uiBytesRemaining;
uiBytesRemaining = 0;
}
-
-
}
-
- while(uiBytesRemaining && uiFailureRetries != 128)
+ while (uiBytesRemaining && uiFailureRetries != 128)
{
- if(Adapter->device_removed )
+ if (Adapter->device_removed)
{
return -1;
}
- if(uiBytesRemaining >= MAX_RW_SIZE)
+ if (uiBytesRemaining >= MAX_RW_SIZE)
{
/* For the requests more than or equal to 16 bytes, use bulk
* read function to make the access faster.
* We read 4 Dwords of data */
- if(0 == ReadBeceemEEPROMBulk(Adapter,uiOffset,&uiData[0],4))
+ if (0 == ReadBeceemEEPROMBulk(Adapter, uiOffset, &uiData[0], 4))
{
- memcpy(pcBuff+uiIndex,&uiData[0],MAX_RW_SIZE);
+ memcpy(pcBuff + uiIndex, &uiData[0], MAX_RW_SIZE);
uiOffset += MAX_RW_SIZE;
uiBytesRemaining -= MAX_RW_SIZE;
uiIndex += MAX_RW_SIZE;
else
{
uiFailureRetries++;
- mdelay(3);//sleep for a while before retry...
+ mdelay(3); //sleep for a while before retry...
}
}
- else if(uiBytesRemaining >= 4)
+ else if (uiBytesRemaining >= 4)
{
- if(0 == ReadBeceemEEPROM(Adapter,uiOffset,&uiData[0]))
+ if (0 == ReadBeceemEEPROM(Adapter, uiOffset, &uiData[0]))
{
- memcpy(pcBuff+uiIndex,&uiData[0],4);
+ memcpy(pcBuff + uiIndex, &uiData[0], 4);
uiOffset += 4;
uiBytesRemaining -= 4;
- uiIndex +=4;
+ uiIndex += 4;
}
else
{
uiFailureRetries++;
- mdelay(3);//sleep for a while before retry...
+ mdelay(3); //sleep for a while before retry...
}
}
else
- { // Handle the reads less than 4 bytes...
+ { // Handle the reads less than 4 bytes...
PUCHAR pCharBuff = (PUCHAR)pBuffer;
pCharBuff += uiIndex;
- if(0 == ReadBeceemEEPROM(Adapter,uiOffset,&uiData[0]))
+ if (0 == ReadBeceemEEPROM(Adapter, uiOffset, &uiData[0]))
{
- memcpy(pCharBuff,&uiData[0],uiBytesRemaining);//copy only bytes requested.
+ memcpy(pCharBuff, &uiData[0], uiBytesRemaining); //copy only bytes requested.
uiBytesRemaining = 0;
}
else
{
uiFailureRetries++;
- mdelay(3);//sleep for a while before retry...
+ mdelay(3); //sleep for a while before retry...
}
}
-
}
return 0;
// <FAILURE> - if failed.
//-----------------------------------------------------------------------------
-static INT BeceemFlashBulkRead(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- UINT uiOffset,
- UINT uiNumBytes)
+static INT BeceemFlashBulkRead(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes)
{
UINT uiIndex = 0;
UINT uiBytesToRead = uiNumBytes;
UINT uiPartOffset = 0;
int bytes;
- if(Adapter->device_removed )
+ if (Adapter->device_removed)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Device Got Removed ");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device Got Removed");
return -ENODEV;
}
- //Adding flash Base address
-// uiOffset = uiOffset + GetFlashBaseAddr(Adapter);
-#if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
- Status = bcmflash_raw_read((uiOffset/FLASH_PART_SIZE),(uiOffset % FLASH_PART_SIZE),( unsigned char *)pBuffer,uiNumBytes);
- return Status;
-#endif
+ // Adding flash Base address
+ // uiOffset = uiOffset + GetFlashBaseAddr(Adapter);
+ #if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
+ Status = bcmflash_raw_read((uiOffset/FLASH_PART_SIZE), (uiOffset % FLASH_PART_SIZE), (unsigned char *)pBuffer, uiNumBytes);
+ return Status;
+ #endif
Adapter->SelectedChip = RESET_CHIP_SELECT;
- if(uiOffset % MAX_RW_SIZE)
+ if (uiOffset % MAX_RW_SIZE)
{
- BcmDoChipSelect(Adapter,uiOffset);
+ BcmDoChipSelect(Adapter, uiOffset);
uiPartOffset = (uiOffset & (FLASH_PART_SIZE - 1)) + GetFlashBaseAddr(Adapter);
- uiBytesToRead = MAX_RW_SIZE - (uiOffset%MAX_RW_SIZE);
- uiBytesToRead = MIN(uiNumBytes,uiBytesToRead);
+ uiBytesToRead = MAX_RW_SIZE - (uiOffset % MAX_RW_SIZE);
+ uiBytesToRead = MIN(uiNumBytes, uiBytesToRead);
- bytes = rdm(Adapter, uiPartOffset, (PCHAR)pBuffer+uiIndex, uiBytesToRead);
+ bytes = rdm(Adapter, uiPartOffset, (PCHAR)pBuffer + uiIndex, uiBytesToRead);
if (bytes < 0) {
Status = bytes;
Adapter->SelectedChip = RESET_CHIP_SELECT;
uiNumBytes -= uiBytesToRead;
}
- while(uiNumBytes)
+ while (uiNumBytes)
{
- BcmDoChipSelect(Adapter,uiOffset);
+ BcmDoChipSelect(Adapter, uiOffset);
uiPartOffset = (uiOffset & (FLASH_PART_SIZE - 1)) + GetFlashBaseAddr(Adapter);
- uiBytesToRead = MIN(uiNumBytes,MAX_RW_SIZE);
+ uiBytesToRead = MIN(uiNumBytes, MAX_RW_SIZE);
- bytes = rdm(Adapter, uiPartOffset, (PCHAR)pBuffer+uiIndex, uiBytesToRead);
+ bytes = rdm(Adapter, uiPartOffset, (PCHAR)pBuffer + uiIndex, uiBytesToRead);
if (bytes < 0) {
Status = bytes;
break;
}
-
uiIndex += uiBytesToRead;
uiOffset += uiBytesToRead;
uiNumBytes -= uiBytesToRead;
-
}
Adapter->SelectedChip = RESET_CHIP_SELECT;
return Status;
static UINT BcmGetFlashSize(struct bcm_mini_adapter *Adapter)
{
- if(IsFlash2x(Adapter))
- return (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER));
+ if (IsFlash2x(Adapter))
+ return (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER));
else
- return 32*1024;
-
-
+ return 32 * 1024;
}
//-----------------------------------------------------------------------------
UINT uiData = 0;
UINT uiIndex = 0;
-//
-// if EEPROM is present and already Calibrated,it will have
-// 'BECM' string at 0th offset.
-// To find the EEPROM size read the possible boundaries of the
-// EEPROM like 4K,8K etc..accessing the EEPROM beyond its size will
-// result in wrap around. So when we get the End of the EEPROM we will
-// get 'BECM' string which is indeed at offset 0.
-//
- BeceemEEPROMBulkRead(Adapter,&uiData,0x0,4);
- if(uiData == BECM)
+ //
+ // if EEPROM is present and already Calibrated,it will have
+ // 'BECM' string at 0th offset.
+ // To find the EEPROM size read the possible boundaries of the
+ // EEPROM like 4K,8K etc..accessing the EEPROM beyond its size will
+ // result in wrap around. So when we get the End of the EEPROM we will
+ // get 'BECM' string which is indeed at offset 0.
+ //
+ BeceemEEPROMBulkRead(Adapter, &uiData, 0x0, 4);
+ if (uiData == BECM)
{
- for(uiIndex = 2;uiIndex <=256; uiIndex*=2)
+ for (uiIndex = 2; uiIndex <= 256; uiIndex *= 2)
{
- BeceemEEPROMBulkRead(Adapter,&uiData,uiIndex*1024,4);
- if(uiData == BECM)
+ BeceemEEPROMBulkRead(Adapter, &uiData, uiIndex * 1024, 4);
+ if (uiData == BECM)
{
- return uiIndex*1024;
+ return uiIndex * 1024;
}
}
}
else
{
-//
-// EEPROM may not be present or not programmed
-//
-
- uiData = 0xBABEFACE;
- if(0 == BeceemEEPROMBulkWrite(Adapter,(PUCHAR)&uiData,0,4,TRUE))
+ //
+ // EEPROM may not be present or not programmed
+ //
+ uiData = 0xBABEFACE;
+ if (0 == BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&uiData, 0, 4, TRUE))
{
uiData = 0;
- for(uiIndex = 2;uiIndex <=256; uiIndex*=2)
+ for (uiIndex = 2; uiIndex <= 256; uiIndex *= 2)
{
- BeceemEEPROMBulkRead(Adapter,&uiData,uiIndex*1024,4);
- if(uiData == 0xBABEFACE)
+ BeceemEEPROMBulkRead(Adapter, &uiData, uiIndex * 1024, 4);
+ if (uiData == 0xBABEFACE)
{
- return uiIndex*1024;
+ return uiIndex * 1024;
}
}
}
-
}
return 0;
}
-
//-----------------------------------------------------------------------------
// Procedure: FlashSectorErase
//
//
//-----------------------------------------------------------------------------
-
static INT FlashSectorErase(struct bcm_mini_adapter *Adapter,
- UINT addr,
- UINT numOfSectors)
+ UINT addr,
+ UINT numOfSectors)
{
UINT iIndex = 0, iRetries = 0;
UINT uiStatus = 0;
UINT value;
int bytes;
- for(iIndex=0;iIndex<numOfSectors;iIndex++)
+ for (iIndex = 0; iIndex < numOfSectors; iIndex++)
{
value = 0x06000000;
wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value));
do
{
value = (FLASH_CMD_STATUS_REG_READ << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Programing of FLASH_SPI_CMDQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Programing of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
}
return uiStatus;
}
iRetries++;
- //After every try lets make the CPU free for 10 ms. generally time taken by the
- //the sector erase cycle is 500 ms to 40000 msec. hence sleeping 10 ms
- //won't hamper performance in any case.
+ // After every try lets make the CPU free for 10 ms. generally time taken by the
+ // the sector erase cycle is 500 ms to 40000 msec. hence sleeping 10 ms
+ // won't hamper performance in any case.
msleep(10);
- }while((uiStatus & 0x1) && (iRetries < 400));
+ } while ((uiStatus & 0x1) && (iRetries < 400));
- if(uiStatus & 0x1)
+ if (uiStatus & 0x1)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"iRetries crossing the limit of 80000\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "iRetries crossing the limit of 80000\n");
return STATUS_FAILURE;
}
//
//-----------------------------------------------------------------------------
-static INT flashByteWrite(
- struct bcm_mini_adapter *Adapter,
- UINT uiOffset,
- PVOID pData)
+static INT flashByteWrite(struct bcm_mini_adapter *Adapter,
+ UINT uiOffset,
+ PVOID pData)
{
-
UINT uiStatus = 0;
INT iRetries = MAX_FLASH_RETRIES * FLASH_PER_RETRIES_DELAY; //3
-
UINT value;
ULONG ulData = *(PUCHAR)pData;
int bytes;
+ //
+ // need not write 0xFF because write requires an erase and erase will
+ // make whole sector 0xFF.
+ //
-//
-// need not write 0xFF because write requires an erase and erase will
-// make whole sector 0xFF.
-//
-
- if(0xFF == ulData)
+ if (0xFF == ulData)
{
return STATUS_SUCCESS;
}
-// DumpDebug(NVM_RW,("flashWrite ====>\n"));
+ // DumpDebug(NVM_RW,("flashWrite ====>\n"));
value = (FLASH_CMD_WRITE_ENABLE << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG,&value, sizeof(value)) < 0)
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Write enable in FLASH_SPI_CMDQ_REG register fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write enable in FLASH_SPI_CMDQ_REG register fails");
return STATUS_FAILURE;
}
- if(wrm(Adapter,FLASH_SPI_WRITEQ_REG, (PCHAR)&ulData, 4) < 0 )
+
+ if (wrm(Adapter, FLASH_SPI_WRITEQ_REG, (PCHAR)&ulData, 4) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"DATA Write on FLASH_SPI_WRITEQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "DATA Write on FLASH_SPI_WRITEQ_REG fails");
return STATUS_FAILURE;
}
value = (0x02000000 | (uiOffset & 0xFFFFFF));
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG,&value, sizeof(value)) < 0 )
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Programming of FLASH_SPI_CMDQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Programming of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
}
do
{
value = (FLASH_CMD_STATUS_REG_READ << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Programing of FLASH_SPI_CMDQ_REG fails");
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Programing of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
- }
- //__udelay(1);
+ }
+ //__udelay(1);
bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
if (bytes < 0) {
uiStatus = bytes;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reading status of FLASH_SPI_READQ_REG fails");
return uiStatus;
}
- iRetries--;
- if( iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
- msleep(1);
+ iRetries--;
+ if (iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
+ msleep(1);
- }while((uiStatus & 0x1) && (iRetries >0) );
+ } while ((uiStatus & 0x1) && (iRetries > 0));
- if(uiStatus & 0x1)
+ if (uiStatus & 0x1)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Write fails even after checking status for 200 times.");
- return STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Write fails even after checking status for 200 times.");
+ return STATUS_FAILURE;
}
return STATUS_SUCCESS;
}
-
-
//-----------------------------------------------------------------------------
// Procedure: flashWrite
//
//
//-----------------------------------------------------------------------------
-static INT flashWrite(
- struct bcm_mini_adapter *Adapter,
- UINT uiOffset,
- PVOID pData)
-
+static INT flashWrite(struct bcm_mini_adapter *Adapter,
+ UINT uiOffset,
+ PVOID pData)
{
//UINT uiStatus = 0;
//INT iRetries = 0;
UINT uiStatus = 0;
INT iRetries = MAX_FLASH_RETRIES * FLASH_PER_RETRIES_DELAY; //3
-
UINT value;
- UINT uiErasePattern[4] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF};
+ UINT uiErasePattern[4] = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF};
int bytes;
-//
-// need not write 0xFFFFFFFF because write requires an erase and erase will
-// make whole sector 0xFFFFFFFF.
-//
+ //
+ // need not write 0xFFFFFFFF because write requires an erase and erase will
+ // make whole sector 0xFFFFFFFF.
+ //
if (!memcmp(pData, uiErasePattern, MAX_RW_SIZE))
{
return 0;
value = (FLASH_CMD_WRITE_ENABLE << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG,&value, sizeof(value)) < 0 )
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Write Enable of FLASH_SPI_CMDQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write Enable of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
}
- if(wrm(Adapter, uiOffset, (PCHAR)pData, MAX_RW_SIZE) < 0)
+
+ if (wrm(Adapter, uiOffset, (PCHAR)pData, MAX_RW_SIZE) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Data write fails...");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Data write fails...");
return STATUS_FAILURE;
}
do
{
value = (FLASH_CMD_STATUS_REG_READ << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Programing of FLASH_SPI_CMDQ_REG fails");
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Programing of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
- }
- //__udelay(1);
+ }
+ //__udelay(1);
bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
if (bytes < 0) {
uiStatus = bytes;
//currently one rdm/wrm takes 125 us.
//Hence 125 *2 * FLASH_PER_RETRIES_DELAY > 3 ms(worst case delay)
//Hence current implementation cycle will intoduce no delay in current path
- if(iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
- msleep(1);
- }while((uiStatus & 0x1) && (iRetries > 0));
+ if (iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
+ msleep(1);
+ } while ((uiStatus & 0x1) && (iRetries > 0));
- if(uiStatus & 0x1)
+ if (uiStatus & 0x1)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Write fails even after checking status for 200 times.");
- return STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Write fails even after checking status for 200 times.");
+ return STATUS_FAILURE;
}
return STATUS_SUCCESS;
// OSAL_STATUS_CODE
//
//-----------------------------------------------------------------------------
-static INT flashByteWriteStatus(
- struct bcm_mini_adapter *Adapter,
- UINT uiOffset,
- PVOID pData)
+static INT flashByteWriteStatus(struct bcm_mini_adapter *Adapter,
+ UINT uiOffset,
+ PVOID pData)
{
UINT uiStatus = 0;
INT iRetries = MAX_FLASH_RETRIES * FLASH_PER_RETRIES_DELAY; //3
UINT value;
int bytes;
-//
-// need not write 0xFFFFFFFF because write requires an erase and erase will
-// make whole sector 0xFFFFFFFF.
-//
+ //
+ // need not write 0xFFFFFFFF because write requires an erase and erase will
+ // make whole sector 0xFFFFFFFF.
+ //
- if(0xFF == ulData)
+ if (0xFF == ulData)
{
return STATUS_SUCCESS;
}
// DumpDebug(NVM_RW,("flashWrite ====>\n"));
value = (FLASH_CMD_WRITE_ENABLE << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG,&value, sizeof(value)) < 0)
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Write enable in FLASH_SPI_CMDQ_REG register fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write enable in FLASH_SPI_CMDQ_REG register fails");
return STATUS_SUCCESS;
}
- if(wrm(Adapter,FLASH_SPI_WRITEQ_REG, (PCHAR)&ulData, 4) < 0)
+ if (wrm(Adapter, FLASH_SPI_WRITEQ_REG, (PCHAR)&ulData, 4) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"DATA Write on FLASH_SPI_WRITEQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "DATA Write on FLASH_SPI_WRITEQ_REG fails");
return STATUS_FAILURE;
}
value = (0x02000000 | (uiOffset & 0xFFFFFF));
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG,&value, sizeof(value)) < 0)
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Programming of FLASH_SPI_CMDQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Programming of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
}
- //msleep(1);
+ //msleep(1);
do
{
value = (FLASH_CMD_STATUS_REG_READ << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Programing of FLASH_SPI_CMDQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Programing of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
}
//__udelay(1);
}
iRetries--;
- if( iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
- msleep(1);
- }while((uiStatus & 0x1) && (iRetries > 0));
+ if (iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
+ msleep(1);
+
+ } while ((uiStatus & 0x1) && (iRetries > 0));
- if(uiStatus & 0x1)
+ if (uiStatus & 0x1)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Write fails even after checking status for 200 times.");
- return STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Write fails even after checking status for 200 times.");
+ return STATUS_FAILURE;
}
return STATUS_SUCCESS;
-
}
//-----------------------------------------------------------------------------
// Procedure: flashWriteStatus
//
//-----------------------------------------------------------------------------
-static INT flashWriteStatus(
- struct bcm_mini_adapter *Adapter,
- UINT uiOffset,
- PVOID pData)
+static INT flashWriteStatus(struct bcm_mini_adapter *Adapter,
+ UINT uiOffset,
+ PVOID pData)
{
UINT uiStatus = 0;
INT iRetries = MAX_FLASH_RETRIES * FLASH_PER_RETRIES_DELAY; //3
//UINT uiReadBack = 0;
UINT value;
- UINT uiErasePattern[4] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF};
+ UINT uiErasePattern[4] = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF};
int bytes;
-//
-// need not write 0xFFFFFFFF because write requires an erase and erase will
-// make whole sector 0xFFFFFFFF.
-//
- if (!memcmp(pData,uiErasePattern,MAX_RW_SIZE))
+ //
+ // need not write 0xFFFFFFFF because write requires an erase and erase will
+ // make whole sector 0xFFFFFFFF.
+ //
+ if (!memcmp(pData, uiErasePattern, MAX_RW_SIZE))
{
return 0;
}
value = (FLASH_CMD_WRITE_ENABLE << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG,&value, sizeof(value)) < 0)
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Write Enable of FLASH_SPI_CMDQ_REG fails");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write Enable of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
}
- if(wrm(Adapter, uiOffset, (PCHAR)pData, MAX_RW_SIZE) < 0)
+
+ if (wrm(Adapter, uiOffset, (PCHAR)pData, MAX_RW_SIZE) < 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Data write fails...");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Data write fails...");
return STATUS_FAILURE;
}
- // __udelay(1);
+ // __udelay(1);
do
{
value = (FLASH_CMD_STATUS_REG_READ << 24);
- if(wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Programing of FLASH_SPI_CMDQ_REG fails");
+ if (wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value)) < 0)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Programing of FLASH_SPI_CMDQ_REG fails");
return STATUS_FAILURE;
- }
- //__udelay(1);
+ }
+ //__udelay(1);
bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
if (bytes < 0) {
uiStatus = bytes;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reading status of FLASH_SPI_READQ_REG fails");
return uiStatus;
}
- iRetries--;
- //this will ensure that in there will be no changes in the current path.
- //currently one rdm/wrm takes 125 us.
- //Hence 125 *2 * FLASH_PER_RETRIES_DELAY >3 ms(worst case delay)
- //Hence current implementation cycle will intoduce no delay in current path
- if(iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
- msleep(1);
- }while((uiStatus & 0x1) && (iRetries >0));
+ iRetries--;
+ // this will ensure that in there will be no changes in the current path.
+ // currently one rdm/wrm takes 125 us.
+ // Hence 125 *2 * FLASH_PER_RETRIES_DELAY >3 ms(worst case delay)
+ // Hence current implementation cycle will intoduce no delay in current path
+ if (iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
+ msleep(1);
- if(uiStatus & 0x1)
+ } while ((uiStatus & 0x1) && (iRetries > 0));
+
+ if (uiStatus & 0x1)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Write fails even after checking status for 200 times.");
- return STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Write fails even after checking status for 200 times.");
+ return STATUS_FAILURE;
}
return STATUS_SUCCESS;
//
//-----------------------------------------------------------------------------
-static VOID BcmRestoreBlockProtectStatus(struct bcm_mini_adapter *Adapter,ULONG ulWriteStatus)
+static VOID BcmRestoreBlockProtectStatus(struct bcm_mini_adapter *Adapter, ULONG ulWriteStatus)
{
UINT value;
- value = (FLASH_CMD_WRITE_ENABLE<< 24);
+ value = (FLASH_CMD_WRITE_ENABLE << 24);
wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value));
udelay(20);
- value = (FLASH_CMD_STATUS_REG_WRITE<<24)|(ulWriteStatus << 16);
+ value = (FLASH_CMD_STATUS_REG_WRITE << 24) | (ulWriteStatus << 16);
wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value));
udelay(20);
}
+
//-----------------------------------------------------------------------------
// Procedure: BcmFlashUnProtectBlock
//
// ULONG - Status value before UnProtect.
//
//-----------------------------------------------------------------------------
-static ULONG BcmFlashUnProtectBlock(struct bcm_mini_adapter *Adapter,UINT uiOffset, UINT uiLength)
+
+static ULONG BcmFlashUnProtectBlock(struct bcm_mini_adapter *Adapter, UINT uiOffset, UINT uiLength)
{
- ULONG ulStatus = 0;
- ULONG ulWriteStatus = 0;
+ ULONG ulStatus = 0;
+ ULONG ulWriteStatus = 0;
UINT value;
- uiOffset = uiOffset&0x000FFFFF;
-//
-// Implemented only for 1MB Flash parts.
-//
- if(FLASH_PART_SST25VF080B == Adapter->ulFlashID)
- {
+ uiOffset = uiOffset&0x000FFFFF;
//
- // Get Current BP status.
+ // Implemented only for 1MB Flash parts.
//
+ if (FLASH_PART_SST25VF080B == Adapter->ulFlashID)
+ {
+ //
+ // Get Current BP status.
+ //
value = (FLASH_CMD_STATUS_REG_READ << 24);
wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value));
udelay(10);
- //
- // Read status will be WWXXYYZZ. We have to take only WW.
- //
+ //
+ // Read status will be WWXXYYZZ. We have to take only WW.
+ //
rdmalt(Adapter, FLASH_SPI_READQ_REG, (PUINT)&ulStatus, sizeof(ulStatus));
ulStatus >>= 24;
ulWriteStatus = ulStatus;
-
- //
- // Bits [5-2] give current block level protection status.
- // Bit5: BP3 - DONT CARE
- // BP2-BP0: 0 - NO PROTECTION, 1 - UPPER 1/16, 2 - UPPER 1/8, 3 - UPPER 1/4
- // 4 - UPPER 1/2. 5 to 7 - ALL BLOCKS
- //
-
- if(ulStatus)
+ //
+ // Bits [5-2] give current block level protection status.
+ // Bit5: BP3 - DONT CARE
+ // BP2-BP0: 0 - NO PROTECTION, 1 - UPPER 1/16, 2 - UPPER 1/8, 3 - UPPER 1/4
+ // 4 - UPPER 1/2. 5 to 7 - ALL BLOCKS
+ //
+
+ if (ulStatus)
{
- if((uiOffset+uiLength) <= 0x80000)
+ if ((uiOffset+uiLength) <= 0x80000)
{
- //
- // Offset comes in lower half of 1MB. Protect the upper half.
- // Clear BP1 and BP0 and set BP2.
- //
+ //
+ // Offset comes in lower half of 1MB. Protect the upper half.
+ // Clear BP1 and BP0 and set BP2.
+ //
ulWriteStatus |= (0x4<<2);
ulWriteStatus &= ~(0x3<<2);
}
- else if((uiOffset+uiLength) <= 0xC0000)
+ else if ((uiOffset + uiLength) <= 0xC0000)
{
- //
- // Offset comes below Upper 1/4. Upper 1/4 can be protected.
- // Clear BP2 and set BP1 and BP0.
- //
+ //
+ // Offset comes below Upper 1/4. Upper 1/4 can be protected.
+ // Clear BP2 and set BP1 and BP0.
+ //
ulWriteStatus |= (0x3<<2);
ulWriteStatus &= ~(0x1<<4);
}
- else if((uiOffset+uiLength) <= 0xE0000)
- {
- //
- // Offset comes below Upper 1/8. Upper 1/8 can be protected.
- // Clear BP2 and BP0 and set BP1
- //
- ulWriteStatus |= (0x1<<3);
- ulWriteStatus &= ~(0x5<<2);
-
- }
- else if((uiOffset+uiLength) <= 0xF0000)
- {
- //
- // Offset comes below Upper 1/16. Only upper 1/16 can be protected.
- // Set BP0 and Clear BP2,BP1.
- //
- ulWriteStatus |= (0x1<<2);
- ulWriteStatus &= ~(0x3<<3);
- }
- else
- {
- //
- // Unblock all.
- // Clear BP2,BP1 and BP0.
- //
- ulWriteStatus &= ~(0x7<<2);
- }
-
- value = (FLASH_CMD_WRITE_ENABLE<< 24);
+ else if ((uiOffset + uiLength) <= 0xE0000)
+ {
+ //
+ // Offset comes below Upper 1/8. Upper 1/8 can be protected.
+ // Clear BP2 and BP0 and set BP1
+ //
+ ulWriteStatus |= (0x1<<3);
+ ulWriteStatus &= ~(0x5<<2);
+ }
+ else if ((uiOffset + uiLength) <= 0xF0000)
+ {
+ //
+ // Offset comes below Upper 1/16. Only upper 1/16 can be protected.
+ // Set BP0 and Clear BP2,BP1.
+ //
+ ulWriteStatus |= (0x1<<2);
+ ulWriteStatus &= ~(0x3<<3);
+ }
+ else
+ {
+ //
+ // Unblock all.
+ // Clear BP2,BP1 and BP0.
+ //
+ ulWriteStatus &= ~(0x7<<2);
+ }
+
+ value = (FLASH_CMD_WRITE_ENABLE << 24);
wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value));
udelay(20);
- value = (FLASH_CMD_STATUS_REG_WRITE<<24)|(ulWriteStatus << 16);
+ value = (FLASH_CMD_STATUS_REG_WRITE << 24) | (ulWriteStatus << 16);
wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value));
udelay(20);
-
}
-
}
return ulStatus;
}
+
//-----------------------------------------------------------------------------
// Procedure: BeceemFlashBulkWrite
//
//
// Arguments:
// Adapter - ptr to Adapter object instance
-// pBuffer - Data to be written.
+// pBuffer - Data to be written.
// uiOffset - Offset of the flash where data needs to be written to.
// uiNumBytes - Number of bytes to be written.
// bVerify - read verify flag.
//
//-----------------------------------------------------------------------------
-static INT BeceemFlashBulkWrite(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- UINT uiOffset,
- UINT uiNumBytes,
- BOOLEAN bVerify)
+static INT BeceemFlashBulkWrite(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes,
+ BOOLEAN bVerify)
{
- PCHAR pTempBuff = NULL;
- PUCHAR pcBuffer = (PUCHAR)pBuffer;
- UINT uiIndex = 0;
- UINT uiOffsetFromSectStart = 0;
- UINT uiSectAlignAddr = 0;
- UINT uiCurrSectOffsetAddr = 0;
- UINT uiSectBoundary = 0;
- UINT uiNumSectTobeRead = 0;
- UCHAR ucReadBk[16] = {0};
- ULONG ulStatus = 0;
- INT Status = STATUS_SUCCESS;
- UINT uiTemp = 0;
- UINT index = 0;
- UINT uiPartOffset = 0;
-
-#if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
- Status = bcmflash_raw_write((uiOffset/FLASH_PART_SIZE),(uiOffset % FLASH_PART_SIZE),( unsigned char *)pBuffer,uiNumBytes);
- return Status;
-#endif
-
- uiOffsetFromSectStart = uiOffset & ~(Adapter->uiSectorSize - 1);
-
- //Adding flash Base address
-// uiOffset = uiOffset + GetFlashBaseAddr(Adapter);
-
- uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
- uiCurrSectOffsetAddr = uiOffset & (Adapter->uiSectorSize - 1);
- uiSectBoundary = uiSectAlignAddr + Adapter->uiSectorSize;
+ PCHAR pTempBuff = NULL;
+ PUCHAR pcBuffer = (PUCHAR)pBuffer;
+ UINT uiIndex = 0;
+ UINT uiOffsetFromSectStart = 0;
+ UINT uiSectAlignAddr = 0;
+ UINT uiCurrSectOffsetAddr = 0;
+ UINT uiSectBoundary = 0;
+ UINT uiNumSectTobeRead = 0;
+ UCHAR ucReadBk[16] = {0};
+ ULONG ulStatus = 0;
+ INT Status = STATUS_SUCCESS;
+ UINT uiTemp = 0;
+ UINT index = 0;
+ UINT uiPartOffset = 0;
+
+ #if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
+ Status = bcmflash_raw_write((uiOffset / FLASH_PART_SIZE), (uiOffset % FLASH_PART_SIZE), (unsigned char *)pBuffer, uiNumBytes);
+ return Status;
+ #endif
+
+ uiOffsetFromSectStart = uiOffset & ~(Adapter->uiSectorSize - 1);
+
+ // Adding flash Base address
+ // uiOffset = uiOffset + GetFlashBaseAddr(Adapter);
+
+ uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
+ uiCurrSectOffsetAddr = uiOffset & (Adapter->uiSectorSize - 1);
+ uiSectBoundary = uiSectAlignAddr + Adapter->uiSectorSize;
pTempBuff = kmalloc(Adapter->uiSectorSize, GFP_KERNEL);
- if(NULL == pTempBuff)
+ if (NULL == pTempBuff)
goto BeceemFlashBulkWrite_EXIT;
-//
-// check if the data to be written is overlapped across sectors
-//
- if(uiOffset+uiNumBytes < uiSectBoundary)
+ //
+ // check if the data to be written is overlapped across sectors
+ //
+ if (uiOffset+uiNumBytes < uiSectBoundary)
{
uiNumSectTobeRead = 1;
}
else
{
- // Number of sectors = Last sector start address/First sector start address
- uiNumSectTobeRead = (uiCurrSectOffsetAddr+uiNumBytes)/Adapter->uiSectorSize;
- if((uiCurrSectOffsetAddr+uiNumBytes)%Adapter->uiSectorSize)
+ // Number of sectors = Last sector start address/First sector start address
+ uiNumSectTobeRead = (uiCurrSectOffsetAddr + uiNumBytes) / Adapter->uiSectorSize;
+ if ((uiCurrSectOffsetAddr + uiNumBytes)%Adapter->uiSectorSize)
{
uiNumSectTobeRead++;
}
}
- //Check whether Requested sector is writable or not in case of flash2x write. But if write call is
+ // Check whether Requested sector is writable or not in case of flash2x write. But if write call is
// for DSD calibration, allow it without checking of sector permission
- if(IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == FALSE))
+ if (IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == FALSE))
{
index = 0;
- uiTemp = uiNumSectTobeRead ;
- while(uiTemp)
+ uiTemp = uiNumSectTobeRead;
+ while (uiTemp)
{
- if(IsOffsetWritable(Adapter, uiOffsetFromSectStart + index * Adapter->uiSectorSize ) == FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Sector Starting at offset <0X%X> is not writable",
- (uiOffsetFromSectStart + index * Adapter->uiSectorSize));
+ if (IsOffsetWritable(Adapter, uiOffsetFromSectStart + index * Adapter->uiSectorSize) == FALSE)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Sector Starting at offset <0X%X> is not writable",
+ (uiOffsetFromSectStart + index * Adapter->uiSectorSize));
Status = SECTOR_IS_NOT_WRITABLE;
goto BeceemFlashBulkWrite_EXIT;
- }
- uiTemp = uiTemp - 1;
- index = index + 1 ;
+ }
+ uiTemp = uiTemp - 1;
+ index = index + 1 ;
}
}
Adapter->SelectedChip = RESET_CHIP_SELECT;
- while(uiNumSectTobeRead)
+ while (uiNumSectTobeRead)
{
- //do_gettimeofday(&tv1);
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "\nTime In start of write :%ld ms\n",(tv1.tv_sec *1000 + tv1.tv_usec /1000));
+ // do_gettimeofday(&tv1);
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "\nTime In start of write :%ld ms\n",(tv1.tv_sec *1000 + tv1.tv_usec /1000));
uiPartOffset = (uiSectAlignAddr & (FLASH_PART_SIZE - 1)) + GetFlashBaseAddr(Adapter);
- BcmDoChipSelect(Adapter,uiSectAlignAddr);
+ BcmDoChipSelect(Adapter, uiSectAlignAddr);
- if(0 != BeceemFlashBulkRead(Adapter,
+ if (0 != BeceemFlashBulkRead(Adapter,
(PUINT)pTempBuff,
uiOffsetFromSectStart,
Adapter->uiSectorSize))
goto BeceemFlashBulkWrite_EXIT;
}
- //do_gettimeofday(&tr);
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken by Read :%ld ms\n", (tr.tv_sec *1000 + tr.tv_usec/1000) - (tv1.tv_sec *1000 + tv1.tv_usec/1000));
-
- ulStatus = BcmFlashUnProtectBlock(Adapter,uiSectAlignAddr,Adapter->uiSectorSize);
+ // do_gettimeofday(&tr);
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken by Read :%ld ms\n", (tr.tv_sec *1000 + tr.tv_usec/1000) - (tv1.tv_sec *1000 + tv1.tv_usec/1000));
+ ulStatus = BcmFlashUnProtectBlock(Adapter, uiSectAlignAddr, Adapter->uiSectorSize);
- if(uiNumSectTobeRead > 1)
+ if (uiNumSectTobeRead > 1)
{
-
- memcpy(&pTempBuff[uiCurrSectOffsetAddr],pcBuffer,uiSectBoundary-(uiSectAlignAddr+uiCurrSectOffsetAddr));
- pcBuffer += ((uiSectBoundary-(uiSectAlignAddr+uiCurrSectOffsetAddr)));
- uiNumBytes -= (uiSectBoundary-(uiSectAlignAddr+uiCurrSectOffsetAddr));
+ memcpy(&pTempBuff[uiCurrSectOffsetAddr], pcBuffer, uiSectBoundary - (uiSectAlignAddr + uiCurrSectOffsetAddr));
+ pcBuffer += ((uiSectBoundary - (uiSectAlignAddr + uiCurrSectOffsetAddr)));
+ uiNumBytes -= (uiSectBoundary - (uiSectAlignAddr + uiCurrSectOffsetAddr));
}
else
{
- memcpy(&pTempBuff[uiCurrSectOffsetAddr],pcBuffer,uiNumBytes);
+ memcpy(&pTempBuff[uiCurrSectOffsetAddr], pcBuffer, uiNumBytes);
}
- if(IsFlash2x(Adapter))
+ if (IsFlash2x(Adapter))
{
- SaveHeaderIfPresent(Adapter,(PUCHAR)pTempBuff,uiOffsetFromSectStart);
+ SaveHeaderIfPresent(Adapter, (PUCHAR)pTempBuff, uiOffsetFromSectStart);
}
- FlashSectorErase(Adapter,uiPartOffset,1);
- //do_gettimeofday(&te);
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken by Erase :%ld ms\n", (te.tv_sec *1000 + te.tv_usec/1000) - (tr.tv_sec *1000 + tr.tv_usec/1000));
+ FlashSectorErase(Adapter, uiPartOffset, 1);
+ // do_gettimeofday(&te);
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken by Erase :%ld ms\n", (te.tv_sec *1000 + te.tv_usec/1000) - (tr.tv_sec *1000 + tr.tv_usec/1000));
- for(uiIndex = 0; uiIndex < Adapter->uiSectorSize; uiIndex +=Adapter->ulFlashWriteSize)
+ for (uiIndex = 0; uiIndex < Adapter->uiSectorSize; uiIndex += Adapter->ulFlashWriteSize)
{
- if(Adapter->device_removed)
+ if (Adapter->device_removed)
{
Status = -1;
goto BeceemFlashBulkWrite_EXIT;
}
- if(STATUS_SUCCESS != (*Adapter->fpFlashWrite)(Adapter,uiPartOffset+uiIndex,(&pTempBuff[uiIndex])))
+
+ if (STATUS_SUCCESS != (*Adapter->fpFlashWrite)(Adapter, uiPartOffset + uiIndex, (&pTempBuff[uiIndex])))
{
Status = -1;
goto BeceemFlashBulkWrite_EXIT;
}
}
- //do_gettimeofday(&tw);
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken in Write to Flash :%ld ms\n", (tw.tv_sec *1000 + tw.tv_usec/1000) - (te.tv_sec *1000 + te.tv_usec/1000));
- for(uiIndex = 0;uiIndex < Adapter->uiSectorSize;uiIndex += MAX_RW_SIZE)
+ // do_gettimeofday(&tw);
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken in Write to Flash :%ld ms\n", (tw.tv_sec *1000 + tw.tv_usec/1000) - (te.tv_sec *1000 + te.tv_usec/1000));
+ for (uiIndex = 0; uiIndex < Adapter->uiSectorSize; uiIndex += MAX_RW_SIZE)
{
- if(STATUS_SUCCESS == BeceemFlashBulkRead(Adapter,(PUINT)ucReadBk,uiOffsetFromSectStart+uiIndex,MAX_RW_SIZE))
+ if (STATUS_SUCCESS == BeceemFlashBulkRead(Adapter, (PUINT)ucReadBk, uiOffsetFromSectStart + uiIndex, MAX_RW_SIZE))
{
- if(Adapter->ulFlashWriteSize == 1)
+ if (Adapter->ulFlashWriteSize == 1)
{
UINT uiReadIndex = 0;
- for(uiReadIndex = 0; uiReadIndex < 16; uiReadIndex++)
+ for (uiReadIndex = 0; uiReadIndex < 16; uiReadIndex++)
{
- if(ucReadBk[uiReadIndex] != pTempBuff[uiIndex+uiReadIndex])
+ if (ucReadBk[uiReadIndex] != pTempBuff[uiIndex + uiReadIndex])
{
- if(STATUS_SUCCESS != (*Adapter->fpFlashWriteWithStatusCheck)(Adapter,uiPartOffset+uiIndex+uiReadIndex,&pTempBuff[uiIndex+uiReadIndex]))
+ if (STATUS_SUCCESS != (*Adapter->fpFlashWriteWithStatusCheck)(Adapter, uiPartOffset + uiIndex + uiReadIndex, &pTempBuff[uiIndex+uiReadIndex]))
{
Status = STATUS_FAILURE;
goto BeceemFlashBulkWrite_EXIT;
}
else
{
- if(memcmp(ucReadBk,&pTempBuff[uiIndex],MAX_RW_SIZE))
+ if (memcmp(ucReadBk, &pTempBuff[uiIndex], MAX_RW_SIZE))
{
- if(STATUS_SUCCESS != (*Adapter->fpFlashWriteWithStatusCheck)(Adapter,uiPartOffset+uiIndex,&pTempBuff[uiIndex]))
+ if (STATUS_SUCCESS != (*Adapter->fpFlashWriteWithStatusCheck)(Adapter, uiPartOffset + uiIndex, &pTempBuff[uiIndex]))
{
Status = STATUS_FAILURE;
goto BeceemFlashBulkWrite_EXIT;
}
}
}
- //do_gettimeofday(&twv);
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken in Write to Flash verification :%ld ms\n", (twv.tv_sec *1000 + twv.tv_usec/1000) - (tw.tv_sec *1000 + tw.tv_usec/1000));
-
-
- if(ulStatus)
+ // do_gettimeofday(&twv);
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken in Write to Flash verification :%ld ms\n", (twv.tv_sec *1000 + twv.tv_usec/1000) - (tw.tv_sec *1000 + tw.tv_usec/1000));
+ if (ulStatus)
{
- BcmRestoreBlockProtectStatus(Adapter,ulStatus);
+ BcmRestoreBlockProtectStatus(Adapter, ulStatus);
ulStatus = 0;
}
uiOffsetFromSectStart += Adapter->uiSectorSize;
uiNumSectTobeRead--;
}
- //do_gettimeofday(&tv2);
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Time after Write :%ld ms\n",(tv2.tv_sec *1000 + tv2.tv_usec/1000));
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken by in Write is :%ld ms\n", (tv2.tv_sec *1000 + tv2.tv_usec/1000) - (tv1.tv_sec *1000 + tv1.tv_usec/1000));
-//
-// Cleanup.
-//
-BeceemFlashBulkWrite_EXIT:
- if(ulStatus)
+ // do_gettimeofday(&tv2);
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Time after Write :%ld ms\n",(tv2.tv_sec *1000 + tv2.tv_usec/1000));
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Total time taken by in Write is :%ld ms\n", (tv2.tv_sec *1000 + tv2.tv_usec/1000) - (tv1.tv_sec *1000 + tv1.tv_usec/1000));
+ //
+ // Cleanup.
+ //
+BeceemFlashBulkWrite_EXIT :
+ if (ulStatus)
{
- BcmRestoreBlockProtectStatus(Adapter,ulStatus);
+ BcmRestoreBlockProtectStatus(Adapter, ulStatus);
}
-
+
kfree(pTempBuff);
Adapter->SelectedChip = RESET_CHIP_SELECT;
return Status;
}
-
//-----------------------------------------------------------------------------
// Procedure: BeceemFlashBulkWriteStatus
//
// Description: Writes to Flash. Checks the SPI status after each write.
//
// Arguments:
-// Adapter - ptr to Adapter object instance
-// pBuffer - Data to be written.
-// uiOffset - Offset of the flash where data needs to be written to.
-// uiNumBytes - Number of bytes to be written.
-// bVerify - read verify flag.
+// Adapter - ptr to Adapter object instance
+// pBuffer - Data to be written.
+// uiOffset - Offset of the flash where data needs to be written to.
+// uiNumBytes - Number of bytes to be written.
+// bVerify - read verify flag.
// Returns:
// OSAL_STATUS_CODE
//
//-----------------------------------------------------------------------------
-static INT BeceemFlashBulkWriteStatus(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- UINT uiOffset,
- UINT uiNumBytes,
- BOOLEAN bVerify)
+static INT BeceemFlashBulkWriteStatus(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes,
+ BOOLEAN bVerify)
{
- PCHAR pTempBuff = NULL;
- PUCHAR pcBuffer = (PUCHAR)pBuffer;
- UINT uiIndex = 0;
- UINT uiOffsetFromSectStart = 0;
- UINT uiSectAlignAddr = 0;
- UINT uiCurrSectOffsetAddr = 0;
- UINT uiSectBoundary = 0;
- UINT uiNumSectTobeRead = 0;
- UCHAR ucReadBk[16] = {0};
- ULONG ulStatus = 0;
- UINT Status = STATUS_SUCCESS;
- UINT uiTemp = 0;
- UINT index = 0;
- UINT uiPartOffset = 0;
-
- uiOffsetFromSectStart = uiOffset & ~(Adapter->uiSectorSize - 1);
-
- //uiOffset += Adapter->ulFlashCalStart;
- //Adding flash Base address
-// uiOffset = uiOffset + GetFlashBaseAddr(Adapter);
-
- uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
- uiCurrSectOffsetAddr = uiOffset & (Adapter->uiSectorSize - 1);
- uiSectBoundary = uiSectAlignAddr + Adapter->uiSectorSize;
+ PCHAR pTempBuff = NULL;
+ PUCHAR pcBuffer = (PUCHAR)pBuffer;
+ UINT uiIndex = 0;
+ UINT uiOffsetFromSectStart = 0;
+ UINT uiSectAlignAddr = 0;
+ UINT uiCurrSectOffsetAddr = 0;
+ UINT uiSectBoundary = 0;
+ UINT uiNumSectTobeRead = 0;
+ UCHAR ucReadBk[16] = {0};
+ ULONG ulStatus = 0;
+ UINT Status = STATUS_SUCCESS;
+ UINT uiTemp = 0;
+ UINT index = 0;
+ UINT uiPartOffset = 0;
+
+ uiOffsetFromSectStart = uiOffset & ~(Adapter->uiSectorSize - 1);
+
+ // uiOffset += Adapter->ulFlashCalStart;
+ // Adding flash Base address
+ // uiOffset = uiOffset + GetFlashBaseAddr(Adapter);
+
+ uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
+ uiCurrSectOffsetAddr = uiOffset & (Adapter->uiSectorSize - 1);
+ uiSectBoundary = uiSectAlignAddr + Adapter->uiSectorSize;
pTempBuff = kmalloc(Adapter->uiSectorSize, GFP_KERNEL);
- if(NULL == pTempBuff)
+ if (NULL == pTempBuff)
goto BeceemFlashBulkWriteStatus_EXIT;
-//
-// check if the data to be written is overlapped across sectors
-//
- if(uiOffset+uiNumBytes < uiSectBoundary)
+ //
+ // check if the data to be written is overlapped across sectors
+ //
+ if (uiOffset+uiNumBytes < uiSectBoundary)
{
uiNumSectTobeRead = 1;
}
else
{
-// Number of sectors = Last sector start address/First sector start address
- uiNumSectTobeRead = (uiCurrSectOffsetAddr+uiNumBytes)/Adapter->uiSectorSize;
- if((uiCurrSectOffsetAddr+uiNumBytes)%Adapter->uiSectorSize)
+ // Number of sectors = Last sector start address/First sector start address
+ uiNumSectTobeRead = (uiCurrSectOffsetAddr + uiNumBytes) / Adapter->uiSectorSize;
+ if ((uiCurrSectOffsetAddr + uiNumBytes)%Adapter->uiSectorSize)
{
uiNumSectTobeRead++;
}
}
- if(IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == FALSE))
+ if (IsFlash2x(Adapter) && (Adapter->bAllDSDWriteAllow == FALSE))
{
index = 0;
- uiTemp = uiNumSectTobeRead ;
- while(uiTemp)
+ uiTemp = uiNumSectTobeRead;
+ while (uiTemp)
{
- if(IsOffsetWritable(Adapter,uiOffsetFromSectStart + index * Adapter->uiSectorSize ) == FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Sector Starting at offset <0X%x> is not writable",
- (uiOffsetFromSectStart + index * Adapter->uiSectorSize));
+ if (IsOffsetWritable(Adapter, uiOffsetFromSectStart + index * Adapter->uiSectorSize) == FALSE)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Sector Starting at offset <0X%x> is not writable",
+ (uiOffsetFromSectStart + index * Adapter->uiSectorSize));
Status = SECTOR_IS_NOT_WRITABLE;
goto BeceemFlashBulkWriteStatus_EXIT;
- }
- uiTemp = uiTemp - 1;
- index = index + 1 ;
+ }
+ uiTemp = uiTemp - 1;
+ index = index + 1 ;
}
}
Adapter->SelectedChip = RESET_CHIP_SELECT;
- while(uiNumSectTobeRead)
+ while (uiNumSectTobeRead)
{
uiPartOffset = (uiSectAlignAddr & (FLASH_PART_SIZE - 1)) + GetFlashBaseAddr(Adapter);
- BcmDoChipSelect(Adapter,uiSectAlignAddr);
- if(0 != BeceemFlashBulkRead(Adapter,
+ BcmDoChipSelect(Adapter, uiSectAlignAddr);
+ if (0 != BeceemFlashBulkRead(Adapter,
(PUINT)pTempBuff,
uiOffsetFromSectStart,
Adapter->uiSectorSize))
goto BeceemFlashBulkWriteStatus_EXIT;
}
- ulStatus = BcmFlashUnProtectBlock(Adapter,uiOffsetFromSectStart,Adapter->uiSectorSize);
+ ulStatus = BcmFlashUnProtectBlock(Adapter, uiOffsetFromSectStart, Adapter->uiSectorSize);
- if(uiNumSectTobeRead > 1)
+ if (uiNumSectTobeRead > 1)
{
-
- memcpy(&pTempBuff[uiCurrSectOffsetAddr],pcBuffer,uiSectBoundary-(uiSectAlignAddr+uiCurrSectOffsetAddr));
- pcBuffer += ((uiSectBoundary-(uiSectAlignAddr+uiCurrSectOffsetAddr)));
- uiNumBytes -= (uiSectBoundary-(uiSectAlignAddr+uiCurrSectOffsetAddr));
+ memcpy(&pTempBuff[uiCurrSectOffsetAddr], pcBuffer, uiSectBoundary - (uiSectAlignAddr + uiCurrSectOffsetAddr));
+ pcBuffer += ((uiSectBoundary - (uiSectAlignAddr + uiCurrSectOffsetAddr)));
+ uiNumBytes -= (uiSectBoundary - (uiSectAlignAddr + uiCurrSectOffsetAddr));
}
else
{
- memcpy(&pTempBuff[uiCurrSectOffsetAddr],pcBuffer,uiNumBytes);
+ memcpy(&pTempBuff[uiCurrSectOffsetAddr], pcBuffer, uiNumBytes);
}
- if(IsFlash2x(Adapter))
+ if (IsFlash2x(Adapter))
{
- SaveHeaderIfPresent(Adapter,(PUCHAR)pTempBuff,uiOffsetFromSectStart);
+ SaveHeaderIfPresent(Adapter, (PUCHAR)pTempBuff, uiOffsetFromSectStart);
}
- FlashSectorErase(Adapter,uiPartOffset,1);
-
- for(uiIndex = 0; uiIndex < Adapter->uiSectorSize; uiIndex +=Adapter->ulFlashWriteSize)
+ FlashSectorErase(Adapter, uiPartOffset, 1);
+ for (uiIndex = 0; uiIndex < Adapter->uiSectorSize; uiIndex += Adapter->ulFlashWriteSize)
{
- if(Adapter->device_removed)
+ if (Adapter->device_removed)
{
Status = -1;
goto BeceemFlashBulkWriteStatus_EXIT;
}
- if(STATUS_SUCCESS != (*Adapter->fpFlashWriteWithStatusCheck)(Adapter,uiPartOffset+uiIndex,&pTempBuff[uiIndex]))
+ if (STATUS_SUCCESS != (*Adapter->fpFlashWriteWithStatusCheck)(Adapter, uiPartOffset+uiIndex, &pTempBuff[uiIndex]))
{
Status = -1;
goto BeceemFlashBulkWriteStatus_EXIT;
}
}
- if(bVerify)
+ if (bVerify)
{
- for(uiIndex = 0;uiIndex < Adapter->uiSectorSize;uiIndex += MAX_RW_SIZE)
+ for (uiIndex = 0; uiIndex < Adapter->uiSectorSize; uiIndex += MAX_RW_SIZE)
{
-
- if(STATUS_SUCCESS == BeceemFlashBulkRead(Adapter,(PUINT)ucReadBk,uiOffsetFromSectStart+uiIndex,MAX_RW_SIZE))
+ if (STATUS_SUCCESS == BeceemFlashBulkRead(Adapter, (PUINT)ucReadBk, uiOffsetFromSectStart + uiIndex, MAX_RW_SIZE))
{
- if(memcmp(ucReadBk,&pTempBuff[uiIndex],MAX_RW_SIZE))
+ if (memcmp(ucReadBk, &pTempBuff[uiIndex], MAX_RW_SIZE))
{
Status = STATUS_FAILURE;
goto BeceemFlashBulkWriteStatus_EXIT;
}
-
}
-
}
}
- if(ulStatus)
+ if (ulStatus)
{
- BcmRestoreBlockProtectStatus(Adapter,ulStatus);
+ BcmRestoreBlockProtectStatus(Adapter, ulStatus);
ulStatus = 0;
}
//
// Cleanup.
//
-BeceemFlashBulkWriteStatus_EXIT:
- if(ulStatus)
+BeceemFlashBulkWriteStatus_EXIT :
+ if (ulStatus)
{
- BcmRestoreBlockProtectStatus(Adapter,ulStatus);
+ BcmRestoreBlockProtectStatus(Adapter, ulStatus);
}
kfree(pTempBuff);
Adapter->SelectedChip = RESET_CHIP_SELECT;
return Status;
-
}
//-----------------------------------------------------------------------------
//
//-----------------------------------------------------------------------------
-
INT PropagateCalParamsFromEEPROMToMemory(struct bcm_mini_adapter *Adapter)
{
PCHAR pBuff = kmalloc(BUFFER_4K, GFP_KERNEL);
UINT uiMemoryLoc = EEPROM_CAL_DATA_INTERNAL_LOC;
UINT value;
INT Status = 0;
- if(pBuff == NULL)
+
+ if (pBuff == NULL)
{
return -1;
}
- if(0 != BeceemEEPROMBulkRead(Adapter,&uiEepromSize,EEPROM_SIZE_OFFSET,4))
+ if (0 != BeceemEEPROMBulkRead(Adapter, &uiEepromSize, EEPROM_SIZE_OFFSET, 4))
{
-
kfree(pBuff);
return -1;
}
uiEepromSize >>= 16;
- if(uiEepromSize > 1024*1024)
+ if (uiEepromSize > 1024 * 1024)
{
kfree(pBuff);
return -1;
}
+ uiBytesToCopy = MIN(BUFFER_4K, uiEepromSize);
- uiBytesToCopy = MIN(BUFFER_4K,uiEepromSize);
-
- while(uiBytesToCopy)
+ while (uiBytesToCopy)
{
- if(0 != BeceemEEPROMBulkRead(Adapter,(PUINT)pBuff,uiCalStartAddr,uiBytesToCopy))
+ if (0 != BeceemEEPROMBulkRead(Adapter, (PUINT)pBuff, uiCalStartAddr, uiBytesToCopy))
{
Status = -1;
break;
}
- wrm(Adapter,uiMemoryLoc,(PCHAR)(((PULONG)pBuff)+uiIndex),uiBytesToCopy);
+ wrm(Adapter, uiMemoryLoc, (PCHAR)(((PULONG)pBuff) + uiIndex), uiBytesToCopy);
uiMemoryLoc += uiBytesToCopy;
uiEepromSize -= uiBytesToCopy;
uiCalStartAddr += uiBytesToCopy;
- uiIndex += uiBytesToCopy/4;
- uiBytesToCopy = MIN(BUFFER_4K,uiEepromSize);
+ uiIndex += uiBytesToCopy / 4;
+ uiBytesToCopy = MIN(BUFFER_4K, uiEepromSize);
}
value = 0xbeadbead;
- wrmalt(Adapter, EEPROM_CAL_DATA_INTERNAL_LOC-4,&value, sizeof(value));
+ wrmalt(Adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 4, &value, sizeof(value));
value = 0xbeadbead;
- wrmalt(Adapter, EEPROM_CAL_DATA_INTERNAL_LOC-8,&value, sizeof(value));
+ wrmalt(Adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 8, &value, sizeof(value));
kfree(pBuff);
return Status;
-
}
//-----------------------------------------------------------------------------
UINT uiMemoryLoc = EEPROM_CAL_DATA_INTERNAL_LOC;
UINT value;
INT Status = 0;
-//
-// Write the signature first. This will ensure firmware does not access EEPROM.
-//
+
+ //
+ // Write the signature first. This will ensure firmware does not access EEPROM.
+ //
value = 0xbeadbead;
wrmalt(Adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 4, &value, sizeof(value));
value = 0xbeadbead;
wrmalt(Adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 8, &value, sizeof(value));
- if(0 != BeceemNVMRead(Adapter,&uiEepromSize,EEPROM_SIZE_OFFSET, 4))
+ if (0 != BeceemNVMRead(Adapter, &uiEepromSize, EEPROM_SIZE_OFFSET, 4))
{
return -1;
}
uiEepromSize = ntohl(uiEepromSize);
uiEepromSize >>= 16;
-//
-// subtract the auto init section size
-//
+ //
+ // subtract the auto init section size
+ //
uiEepromSize -= EEPROM_CALPARAM_START;
- if(uiEepromSize > 1024*1024)
+ if (uiEepromSize > 1024 * 1024)
{
return -1;
}
pBuff = kmalloc(uiEepromSize, GFP_KERNEL);
- if ( pBuff == NULL )
+ if (pBuff == NULL)
return -1;
- if(0 != BeceemNVMRead(Adapter,(PUINT)pBuff,uiCalStartAddr, uiEepromSize))
+ if (0 != BeceemNVMRead(Adapter, (PUINT)pBuff, uiCalStartAddr, uiEepromSize))
{
kfree(pBuff);
return -1;
pPtr = pBuff;
- uiBytesToCopy = MIN(BUFFER_4K,uiEepromSize);
+ uiBytesToCopy = MIN(BUFFER_4K, uiEepromSize);
- while(uiBytesToCopy)
+ while (uiBytesToCopy)
{
- Status = wrm(Adapter,uiMemoryLoc,(PCHAR)pPtr,uiBytesToCopy);
- if(Status)
+ Status = wrm(Adapter, uiMemoryLoc, (PCHAR)pPtr, uiBytesToCopy);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"wrm failed with status :%d",Status);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed with status :%d", Status);
break;
}
pPtr += uiBytesToCopy;
uiEepromSize -= uiBytesToCopy;
uiMemoryLoc += uiBytesToCopy;
- uiBytesToCopy = MIN(BUFFER_4K,uiEepromSize);
+ uiBytesToCopy = MIN(BUFFER_4K, uiEepromSize);
}
kfree(pBuff);
return Status;
-
}
//-----------------------------------------------------------------------------
// Description: Read back the data written and verifies.
//
// Arguments:
-// Adapter - ptr to Adapter object instance
-// pBuffer - Data to be written.
-// uiOffset - Offset of the flash where data needs to be written to.
-// uiNumBytes - Number of bytes to be written.
+// Adapter - ptr to Adapter object instance
+// pBuffer - Data to be written.
+// uiOffset - Offset of the flash where data needs to be written to.
+// uiNumBytes - Number of bytes to be written.
// Returns:
// OSAL_STATUS_CODE
//
//-----------------------------------------------------------------------------
-static INT BeceemEEPROMReadBackandVerify(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- UINT uiOffset,
- UINT uiNumBytes)
+static INT BeceemEEPROMReadBackandVerify(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes)
{
- UINT uiRdbk = 0;
- UINT uiIndex = 0;
- UINT uiData = 0;
- UINT auiData[4] = {0};
+ UINT uiRdbk = 0;
+ UINT uiIndex = 0;
+ UINT uiData = 0;
+ UINT auiData[4] = {0};
- while(uiNumBytes)
+ while (uiNumBytes)
{
- if(Adapter->device_removed )
+ if (Adapter->device_removed)
{
return -1;
}
- if(uiNumBytes >= MAX_RW_SIZE)
- {// for the requests more than or equal to MAX_RW_SIZE bytes, use bulk read function to make the access faster.
- BeceemEEPROMBulkRead(Adapter,&auiData[0],uiOffset,MAX_RW_SIZE);
+ if (uiNumBytes >= MAX_RW_SIZE)
+ { // for the requests more than or equal to MAX_RW_SIZE bytes, use bulk read function to make the access faster.
+ BeceemEEPROMBulkRead(Adapter, &auiData[0], uiOffset, MAX_RW_SIZE);
- if(memcmp(&pBuffer[uiIndex],&auiData[0],MAX_RW_SIZE))
+ if (memcmp(&pBuffer[uiIndex], &auiData[0], MAX_RW_SIZE))
{
// re-write
- BeceemEEPROMBulkWrite(Adapter,(PUCHAR)(pBuffer+uiIndex),uiOffset,MAX_RW_SIZE,FALSE);
+ BeceemEEPROMBulkWrite(Adapter, (PUCHAR)(pBuffer + uiIndex), uiOffset, MAX_RW_SIZE, FALSE);
mdelay(3);
- BeceemEEPROMBulkRead(Adapter,&auiData[0],uiOffset,MAX_RW_SIZE);
+ BeceemEEPROMBulkRead(Adapter, &auiData[0], uiOffset, MAX_RW_SIZE);
- if(memcmp(&pBuffer[uiIndex],&auiData[0],MAX_RW_SIZE))
+ if (memcmp(&pBuffer[uiIndex], &auiData[0], MAX_RW_SIZE))
{
return -1;
}
uiOffset += MAX_RW_SIZE;
uiNumBytes -= MAX_RW_SIZE;
uiIndex += 4;
-
}
- else if(uiNumBytes >= 4)
+ else if (uiNumBytes >= 4)
{
- BeceemEEPROMBulkRead(Adapter,&uiData,uiOffset,4);
- if(uiData != pBuffer[uiIndex])
+ BeceemEEPROMBulkRead(Adapter, &uiData, uiOffset, 4);
+ if (uiData != pBuffer[uiIndex])
{
- //re-write
- BeceemEEPROMBulkWrite(Adapter,(PUCHAR)(pBuffer+uiIndex),uiOffset,4,FALSE);
+ // re-write
+ BeceemEEPROMBulkWrite(Adapter, (PUCHAR)(pBuffer + uiIndex), uiOffset, 4, FALSE);
mdelay(3);
- BeceemEEPROMBulkRead(Adapter,&uiData,uiOffset,4);
- if(uiData != pBuffer[uiIndex])
+ BeceemEEPROMBulkRead(Adapter, &uiData, uiOffset, 4);
+ if (uiData != pBuffer[uiIndex])
{
return -1;
}
uiOffset += 4;
uiNumBytes -= 4;
uiIndex++;
-
}
else
{ // Handle the reads less than 4 bytes...
uiData = 0;
- memcpy(&uiData,((PUCHAR)pBuffer)+(uiIndex*sizeof(UINT)),uiNumBytes);
- BeceemEEPROMBulkRead(Adapter,&uiRdbk,uiOffset,4);
+ memcpy(&uiData, ((PUCHAR)pBuffer) + (uiIndex * sizeof(UINT)), uiNumBytes);
+ BeceemEEPROMBulkRead(Adapter, &uiRdbk, uiOffset, 4);
- if(memcmp(&uiData, &uiRdbk, uiNumBytes))
+ if (memcmp(&uiData, &uiRdbk, uiNumBytes))
return -1;
uiNumBytes = 0;
}
-
}
return 0;
static VOID BcmSwapWord(UINT *ptr1) {
- UINT tempval = (UINT)*ptr1;
+ UINT tempval = (UINT)*ptr1;
char *ptr2 = (char *)&tempval;
char *ptr = (char *)ptr1;
// Description: Performs page write (16bytes) to the EEPROM
//
// Arguments:
-// Adapter - ptr to Adapter object instance
-// uiData - Data to be written.
-// uiOffset - Offset of the EEPROM where data needs to be written to.
+// Adapter - ptr to Adapter object instance
+// uiData - Data to be written.
+// uiOffset - Offset of the EEPROM where data needs to be written to.
// Returns:
// OSAL_STATUS_CODE
//
//-----------------------------------------------------------------------------
-static INT BeceemEEPROMWritePage(struct bcm_mini_adapter *Adapter, UINT uiData[], UINT uiOffset )
+
+static INT BeceemEEPROMWritePage(struct bcm_mini_adapter *Adapter, UINT uiData[], UINT uiOffset)
{
- UINT uiRetries = MAX_EEPROM_RETRIES*RETRIES_PER_DELAY;
+ UINT uiRetries = MAX_EEPROM_RETRIES * RETRIES_PER_DELAY;
UINT uiStatus = 0;
UCHAR uiEpromStatus = 0;
- UINT value =0 ;
+ UINT value = 0;
/* Flush the Write/Read/Cmd queues. */
- value = ( EEPROM_WRITE_QUEUE_FLUSH | EEPROM_CMD_QUEUE_FLUSH | EEPROM_READ_QUEUE_FLUSH );
- wrmalt( Adapter, SPI_FLUSH_REG, &value, sizeof(value));
- value = 0 ;
- wrmalt( Adapter, SPI_FLUSH_REG, &value, sizeof(value) );
+ value = (EEPROM_WRITE_QUEUE_FLUSH | EEPROM_CMD_QUEUE_FLUSH | EEPROM_READ_QUEUE_FLUSH);
+ wrmalt(Adapter, SPI_FLUSH_REG, &value, sizeof(value));
+ value = 0;
+ wrmalt(Adapter, SPI_FLUSH_REG, &value, sizeof(value));
/* Clear the Empty/Avail/Full bits. After this it has been confirmed
* that the bit was cleared by reading back the register. See NOTE below.
* We also clear the Read queues as we do a EEPROM status register read
* later. */
- value = ( EEPROM_WRITE_QUEUE_EMPTY | EEPROM_WRITE_QUEUE_AVAIL | EEPROM_WRITE_QUEUE_FULL | EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL ) ;
- wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG,&value, sizeof(value));
+ value = (EEPROM_WRITE_QUEUE_EMPTY | EEPROM_WRITE_QUEUE_AVAIL | EEPROM_WRITE_QUEUE_FULL | EEPROM_READ_DATA_AVAIL | EEPROM_READ_DATA_FULL);
+ wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
/* Enable write */
- value = EEPROM_WRITE_ENABLE ;
- wrmalt( Adapter, EEPROM_CMDQ_SPI_REG,&value, sizeof(value) );
+ value = EEPROM_WRITE_ENABLE;
+ wrmalt(Adapter, EEPROM_CMDQ_SPI_REG, &value, sizeof(value));
/* We can write back to back 8bits * 16 into the queue and as we have
* checked for the queue to be empty we can write in a burst. */
value = uiData[0];
BcmSwapWord(&value);
- wrm( Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
+ wrm(Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
value = uiData[1];
BcmSwapWord(&value);
- wrm( Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
+ wrm(Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
value = uiData[2];
BcmSwapWord(&value);
- wrm( Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
+ wrm(Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
value = uiData[3];
BcmSwapWord(&value);
- wrm( Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
+ wrm(Adapter, EEPROM_WRITE_DATAQ_REG, (PUCHAR)&value, 4);
/* NOTE : After this write, on readback of EEPROM_SPI_Q_STATUS1_REG
* shows that we see 7 for the EEPROM data write. Which means that
* queue got full, also space is available as well as the queue is empty.
* This may happen in sequence. */
- value = EEPROM_16_BYTE_PAGE_WRITE | uiOffset ;
- wrmalt( Adapter, EEPROM_CMDQ_SPI_REG, &value, sizeof(value) );
+ value = EEPROM_16_BYTE_PAGE_WRITE | uiOffset;
+ wrmalt(Adapter, EEPROM_CMDQ_SPI_REG, &value, sizeof(value));
/* Ideally we should loop here without tries and eventually succeed.
* What we are checking if the previous write has completed, and this
* may take time. We should wait till the Empty bit is set. */
uiStatus = 0;
rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
- while ( ( uiStatus & EEPROM_WRITE_QUEUE_EMPTY ) == 0 )
+ while ((uiStatus & EEPROM_WRITE_QUEUE_EMPTY) == 0)
{
uiRetries--;
- if ( uiRetries == 0 )
+ if (uiRetries == 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "0x0f003004 = %x, %d retries failed.\n", uiStatus, MAX_EEPROM_RETRIES *RETRIES_PER_DELAY);
- return STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "0x0f003004 = %x, %d retries failed.\n", uiStatus, MAX_EEPROM_RETRIES * RETRIES_PER_DELAY);
+ return STATUS_FAILURE;
}
- if( !(uiRetries%RETRIES_PER_DELAY) )
- msleep(1);
+ if (!(uiRetries%RETRIES_PER_DELAY))
+ msleep(1);
uiStatus = 0;
rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
- if(Adapter->device_removed == TRUE)
+ if (Adapter->device_removed == TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Modem got removed hence exiting from loop....");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Modem got removed hence exiting from loop....");
return -ENODEV;
}
-
}
- if ( uiRetries != 0 )
+ if (uiRetries != 0)
{
/* Clear the ones that are set - either, Empty/Full/Avail bits */
- value = ( uiStatus & ( EEPROM_WRITE_QUEUE_EMPTY | EEPROM_WRITE_QUEUE_AVAIL | EEPROM_WRITE_QUEUE_FULL ) );
- wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
+ value = (uiStatus & (EEPROM_WRITE_QUEUE_EMPTY | EEPROM_WRITE_QUEUE_AVAIL | EEPROM_WRITE_QUEUE_FULL));
+ wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
}
/* Here we should check if the EEPROM status register is correct before
* we proceed further. A 1 at Bit 0 indicates that the EEPROM is busy
* with the previous write. Note also that issuing this read finally
* means the previous write to the EEPROM has completed. */
- uiRetries = MAX_EEPROM_RETRIES*RETRIES_PER_DELAY;
+ uiRetries = MAX_EEPROM_RETRIES * RETRIES_PER_DELAY;
uiEpromStatus = 0;
- while ( uiRetries != 0 )
+ while (uiRetries != 0)
{
- uiEpromStatus = ReadEEPROMStatusRegister( Adapter) ;
- if(Adapter->device_removed == TRUE)
+ uiEpromStatus = ReadEEPROMStatusRegister(Adapter);
+ if (Adapter->device_removed == TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Modem has got removed hence exiting from loop...");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Modem has got removed hence exiting from loop...");
return -ENODEV;
}
- if ( ( EEPROM_STATUS_REG_WRITE_BUSY & uiEpromStatus ) == 0 )
+ if ((EEPROM_STATUS_REG_WRITE_BUSY & uiEpromStatus) == 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "EEPROM status register = %x tries = %d\n", uiEpromStatus, (MAX_EEPROM_RETRIES * RETRIES_PER_DELAY- uiRetries) );
- return STATUS_SUCCESS ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM status register = %x tries = %d\n", uiEpromStatus, (MAX_EEPROM_RETRIES * RETRIES_PER_DELAY - uiRetries));
+ return STATUS_SUCCESS;
}
uiRetries--;
- if ( uiRetries == 0 )
+ if (uiRetries == 0)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "0x0f003004 = %x, for EEPROM status read %d retries failed.\n", uiEpromStatus, MAX_EEPROM_RETRIES *RETRIES_PER_DELAY);
- return STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "0x0f003004 = %x, for EEPROM status read %d retries failed.\n", uiEpromStatus, MAX_EEPROM_RETRIES * RETRIES_PER_DELAY);
+ return STATUS_FAILURE;
}
uiEpromStatus = 0;
- if( !(uiRetries%RETRIES_PER_DELAY) )
- msleep(1);
+ if (!(uiRetries%RETRIES_PER_DELAY))
+ msleep(1);
}
- return STATUS_SUCCESS ;
+ return STATUS_SUCCESS;
} /* BeceemEEPROMWritePage */
-
//-----------------------------------------------------------------------------
// Procedure: BeceemEEPROMBulkWrite
//
// Description: Performs write to the EEPROM
//
// Arguments:
-// Adapter - ptr to Adapter object instance
-// pBuffer - Data to be written.
-// uiOffset - Offset of the EEPROM where data needs to be written to.
-// uiNumBytes - Number of bytes to be written.
-// bVerify - read verify flag.
+// Adapter - ptr to Adapter object instance
+// pBuffer - Data to be written.
+// uiOffset - Offset of the EEPROM where data needs to be written to.
+// uiNumBytes - Number of bytes to be written.
+// bVerify - read verify flag.
// Returns:
// OSAL_STATUS_CODE
//
//-----------------------------------------------------------------------------
-INT BeceemEEPROMBulkWrite(
- struct bcm_mini_adapter *Adapter,
- PUCHAR pBuffer,
- UINT uiOffset,
- UINT uiNumBytes,
- BOOLEAN bVerify)
+INT BeceemEEPROMBulkWrite(struct bcm_mini_adapter *Adapter,
+ PUCHAR pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes,
+ BOOLEAN bVerify)
{
- UINT uiBytesToCopy = uiNumBytes;
- //UINT uiRdbk = 0;
- UINT uiData[4] = {0};
- UINT uiIndex = 0;
- UINT uiTempOffset = 0;
- UINT uiExtraBytes = 0;
- //PUINT puiBuffer = (PUINT)pBuffer;
- //INT value;
+ UINT uiBytesToCopy = uiNumBytes;
+ // UINT uiRdbk = 0;
+ UINT uiData[4] = {0};
+ UINT uiIndex = 0;
+ UINT uiTempOffset = 0;
+ UINT uiExtraBytes = 0;
+ // PUINT puiBuffer = (PUINT)pBuffer;
+ // INT value;
- if(uiOffset%MAX_RW_SIZE && uiBytesToCopy)
+ if (uiOffset % MAX_RW_SIZE && uiBytesToCopy)
{
- uiTempOffset = uiOffset - (uiOffset%MAX_RW_SIZE);
- uiExtraBytes = uiOffset-uiTempOffset;
-
+ uiTempOffset = uiOffset - (uiOffset % MAX_RW_SIZE);
+ uiExtraBytes = uiOffset - uiTempOffset;
- BeceemEEPROMBulkRead(Adapter,&uiData[0],uiTempOffset,MAX_RW_SIZE);
+ BeceemEEPROMBulkRead(Adapter, &uiData[0], uiTempOffset, MAX_RW_SIZE);
- if(uiBytesToCopy >= (16 -uiExtraBytes))
+ if (uiBytesToCopy >= (16 - uiExtraBytes))
{
- memcpy((((PUCHAR)&uiData[0])+uiExtraBytes),pBuffer,MAX_RW_SIZE- uiExtraBytes);
+ memcpy((((PUCHAR)&uiData[0]) + uiExtraBytes), pBuffer, MAX_RW_SIZE - uiExtraBytes);
- if ( STATUS_FAILURE == BeceemEEPROMWritePage( Adapter, uiData, uiTempOffset ) )
- return STATUS_FAILURE;
+ if (STATUS_FAILURE == BeceemEEPROMWritePage(Adapter, uiData, uiTempOffset))
+ return STATUS_FAILURE;
uiBytesToCopy -= (MAX_RW_SIZE - uiExtraBytes);
uiIndex += (MAX_RW_SIZE - uiExtraBytes);
}
else
{
- memcpy((((PUCHAR)&uiData[0])+uiExtraBytes),pBuffer,uiBytesToCopy);
+ memcpy((((PUCHAR)&uiData[0]) + uiExtraBytes), pBuffer, uiBytesToCopy);
- if ( STATUS_FAILURE == BeceemEEPROMWritePage( Adapter, uiData, uiTempOffset ) )
- return STATUS_FAILURE;
+ if (STATUS_FAILURE == BeceemEEPROMWritePage(Adapter, uiData, uiTempOffset))
+ return STATUS_FAILURE;
uiIndex += uiBytesToCopy;
uiOffset += uiBytesToCopy;
uiBytesToCopy = 0;
}
-
-
}
- while(uiBytesToCopy)
+ while (uiBytesToCopy)
{
- if(Adapter->device_removed)
+ if (Adapter->device_removed)
{
return -1;
}
- if(uiBytesToCopy >= MAX_RW_SIZE)
+ if (uiBytesToCopy >= MAX_RW_SIZE)
{
-
- if (STATUS_FAILURE == BeceemEEPROMWritePage( Adapter, (PUINT) &pBuffer[uiIndex], uiOffset ) )
- return STATUS_FAILURE;
+ if (STATUS_FAILURE == BeceemEEPROMWritePage(Adapter, (PUINT) &pBuffer[uiIndex], uiOffset))
+ return STATUS_FAILURE;
uiIndex += MAX_RW_SIZE;
uiOffset += MAX_RW_SIZE;
- uiBytesToCopy -= MAX_RW_SIZE;
+ uiBytesToCopy -= MAX_RW_SIZE;
}
else
{
- //
- // To program non 16byte aligned data, read 16byte and then update.
- //
- BeceemEEPROMBulkRead(Adapter,&uiData[0],uiOffset,16);
- memcpy(&uiData[0],pBuffer+uiIndex,uiBytesToCopy);
+ //
+ // To program non 16byte aligned data, read 16byte and then update.
+ //
+ BeceemEEPROMBulkRead(Adapter, &uiData[0], uiOffset, 16);
+ memcpy(&uiData[0], pBuffer + uiIndex, uiBytesToCopy);
+ if (STATUS_FAILURE == BeceemEEPROMWritePage(Adapter, uiData, uiOffset))
+ return STATUS_FAILURE;
- if ( STATUS_FAILURE == BeceemEEPROMWritePage( Adapter, uiData, uiOffset ) )
- return STATUS_FAILURE;
uiBytesToCopy = 0;
}
-
}
return 0;
// <FAILURE> - if failed.
//-----------------------------------------------------------------------------
-INT BeceemNVMRead(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- UINT uiOffset,
- UINT uiNumBytes)
+INT BeceemNVMRead(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes)
{
INT Status = 0;
-#if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
- UINT uiTemp = 0, value;
-#endif
- if(Adapter->eNVMType == NVM_FLASH)
+ #if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
+ UINT uiTemp = 0, value;
+ #endif
+
+ if (Adapter->eNVMType == NVM_FLASH)
{
- if(Adapter->bFlashRawRead == FALSE)
+ if (Adapter->bFlashRawRead == FALSE)
{
- if (IsSectionExistInVendorInfo(Adapter,Adapter->eActiveDSD))
- return vendorextnReadSection(Adapter,(PUCHAR)pBuffer,Adapter->eActiveDSD,uiOffset,uiNumBytes);
- uiOffset = uiOffset+ Adapter->ulFlashCalStart ;
+ if (IsSectionExistInVendorInfo(Adapter, Adapter->eActiveDSD))
+ return vendorextnReadSection(Adapter, (PUCHAR)pBuffer, Adapter->eActiveDSD, uiOffset, uiNumBytes);
+
+ uiOffset = uiOffset + Adapter->ulFlashCalStart;
}
-#if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
- Status = bcmflash_raw_read((uiOffset/FLASH_PART_SIZE),(uiOffset % FLASH_PART_SIZE),( unsigned char *)pBuffer,uiNumBytes);
-#else
- rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
- value = 0;
- wrmalt(Adapter, 0x0f000C80,&value, sizeof(value));
- Status = BeceemFlashBulkRead(Adapter,
+ #if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
+ Status = bcmflash_raw_read((uiOffset / FLASH_PART_SIZE), (uiOffset % FLASH_PART_SIZE), (unsigned char *)pBuffer, uiNumBytes);
+ #else
+ rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
+ value = 0;
+ wrmalt(Adapter, 0x0f000C80, &value, sizeof(value));
+ Status = BeceemFlashBulkRead(Adapter,
pBuffer,
uiOffset,
uiNumBytes);
- wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
-#endif
+ wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
+ #endif
}
- else if(Adapter->eNVMType == NVM_EEPROM)
+ else if (Adapter->eNVMType == NVM_EEPROM)
{
Status = BeceemEEPROMBulkRead(Adapter,
pBuffer,
{
Status = -1;
}
+
return Status;
}
// <FAILURE> - if failed.
//-----------------------------------------------------------------------------
-INT BeceemNVMWrite(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- UINT uiOffset,
- UINT uiNumBytes,
- BOOLEAN bVerify)
+INT BeceemNVMWrite(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ UINT uiOffset,
+ UINT uiNumBytes,
+ BOOLEAN bVerify)
{
INT Status = 0;
UINT uiTemp = 0;
UINT uiMemoryLoc = EEPROM_CAL_DATA_INTERNAL_LOC;
UINT uiIndex = 0;
-#if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
- UINT value;
-#endif
+
+ #if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
+ UINT value;
+ #endif
+
UINT uiFlashOffset = 0;
- if(Adapter->eNVMType == NVM_FLASH)
+ if (Adapter->eNVMType == NVM_FLASH)
{
- if (IsSectionExistInVendorInfo(Adapter,Adapter->eActiveDSD))
- Status = vendorextnWriteSection(Adapter,(PUCHAR)pBuffer,Adapter->eActiveDSD,uiOffset,uiNumBytes,bVerify);
+ if (IsSectionExistInVendorInfo(Adapter, Adapter->eActiveDSD))
+ Status = vendorextnWriteSection(Adapter, (PUCHAR)pBuffer, Adapter->eActiveDSD, uiOffset, uiNumBytes, bVerify);
else
{
uiFlashOffset = uiOffset + Adapter->ulFlashCalStart;
-#if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
- Status = bcmflash_raw_write((uiFlashOffset/FLASH_PART_SIZE), (uiFlashOffset % FLASH_PART_SIZE), (unsigned char *)pBuffer,uiNumBytes);
-#else
- rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
- value = 0;
- wrmalt(Adapter, 0x0f000C80, &value, sizeof(value));
+ #if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
+ Status = bcmflash_raw_write((uiFlashOffset / FLASH_PART_SIZE), (uiFlashOffset % FLASH_PART_SIZE), (unsigned char *)pBuffer, uiNumBytes);
+ #else
+ rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
+ value = 0;
+ wrmalt(Adapter, 0x0f000C80, &value, sizeof(value));
- if(Adapter->bStatusWrite == TRUE)
- {
- Status = BeceemFlashBulkWriteStatus(Adapter,
- pBuffer,
- uiFlashOffset,
- uiNumBytes ,
- bVerify);
- }
- else
- {
+ if (Adapter->bStatusWrite == TRUE)
+ {
+ Status = BeceemFlashBulkWriteStatus(Adapter,
+ pBuffer,
+ uiFlashOffset,
+ uiNumBytes ,
+ bVerify);
+ }
+ else
+ {
- Status = BeceemFlashBulkWrite(Adapter,
- pBuffer,
- uiFlashOffset,
- uiNumBytes,
- bVerify);
- }
-#endif
+ Status = BeceemFlashBulkWrite(Adapter,
+ pBuffer,
+ uiFlashOffset,
+ uiNumBytes,
+ bVerify);
+ }
+ #endif
}
-
- if(uiOffset >= EEPROM_CALPARAM_START)
+ if (uiOffset >= EEPROM_CALPARAM_START)
{
uiMemoryLoc += (uiOffset - EEPROM_CALPARAM_START);
- while(uiNumBytes)
+ while (uiNumBytes)
{
- if(uiNumBytes > BUFFER_4K)
+ if (uiNumBytes > BUFFER_4K)
{
- wrm(Adapter,(uiMemoryLoc+uiIndex),(PCHAR)(pBuffer+(uiIndex/4)),BUFFER_4K);
+ wrm(Adapter, (uiMemoryLoc+uiIndex), (PCHAR)(pBuffer + (uiIndex / 4)), BUFFER_4K);
uiNumBytes -= BUFFER_4K;
uiIndex += BUFFER_4K;
}
else
{
- wrm(Adapter,uiMemoryLoc+uiIndex,(PCHAR)(pBuffer+(uiIndex/4)),uiNumBytes);
+ wrm(Adapter, uiMemoryLoc+uiIndex, (PCHAR)(pBuffer + (uiIndex / 4)), uiNumBytes);
uiNumBytes = 0;
break;
}
}
else
{
- if((uiOffset+uiNumBytes) > EEPROM_CALPARAM_START)
+ if ((uiOffset + uiNumBytes) > EEPROM_CALPARAM_START)
{
ULONG ulBytesTobeSkipped = 0;
- PUCHAR pcBuffer = (PUCHAR)pBuffer;// char pointer to take care of odd byte cases.
+ PUCHAR pcBuffer = (PUCHAR)pBuffer; // char pointer to take care of odd byte cases.
uiNumBytes -= (EEPROM_CALPARAM_START - uiOffset);
ulBytesTobeSkipped += (EEPROM_CALPARAM_START - uiOffset);
uiOffset += (EEPROM_CALPARAM_START - uiOffset);
- while(uiNumBytes)
+ while (uiNumBytes)
{
- if(uiNumBytes > BUFFER_4K)
+ if (uiNumBytes > BUFFER_4K)
{
- wrm(Adapter,uiMemoryLoc+uiIndex,(PCHAR )&pcBuffer[ulBytesTobeSkipped+uiIndex],BUFFER_4K);
+ wrm(Adapter, uiMemoryLoc + uiIndex, (PCHAR)&pcBuffer[ulBytesTobeSkipped + uiIndex], BUFFER_4K);
uiNumBytes -= BUFFER_4K;
uiIndex += BUFFER_4K;
}
else
{
- wrm(Adapter,uiMemoryLoc+uiIndex,(PCHAR)&pcBuffer[ulBytesTobeSkipped+uiIndex],uiNumBytes);
+ wrm(Adapter, uiMemoryLoc + uiIndex, (PCHAR)&pcBuffer[ulBytesTobeSkipped + uiIndex], uiNumBytes);
uiNumBytes = 0;
break;
}
}
-
}
}
-
- // restore the values.
- wrmalt(Adapter,0x0f000C80,&uiTemp, sizeof(uiTemp));
+ // restore the values.
+ wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
}
- else if(Adapter->eNVMType == NVM_EEPROM)
+ else if (Adapter->eNVMType == NVM_EEPROM)
{
Status = BeceemEEPROMBulkWrite(Adapter,
(PUCHAR)pBuffer,
uiOffset,
uiNumBytes,
bVerify);
- if(bVerify)
+ if (bVerify)
{
- Status = BeceemEEPROMReadBackandVerify(Adapter,(PUINT)pBuffer,uiOffset,uiNumBytes);
+ Status = BeceemEEPROMReadBackandVerify(Adapter, (PUINT)pBuffer, uiOffset, uiNumBytes);
}
}
else
// <FAILURE> - if failed.
//-----------------------------------------------------------------------------
-INT BcmUpdateSectorSize(struct bcm_mini_adapter *Adapter,UINT uiSectorSize)
+INT BcmUpdateSectorSize(struct bcm_mini_adapter *Adapter, UINT uiSectorSize)
{
INT Status = -1;
FLASH_CS_INFO sFlashCsInfo = {0};
UINT uiTemp = 0;
-
UINT uiSectorSig = 0;
UINT uiCurrentSectorSize = 0;
-
UINT value;
-
-
rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
value = 0;
- wrmalt(Adapter, 0x0f000C80,&value, sizeof(value));
+ wrmalt(Adapter, 0x0f000C80, &value, sizeof(value));
-//
-// Before updating the sector size in the reserved area, check if already present.
-//
- BeceemFlashBulkRead(Adapter,(PUINT)&sFlashCsInfo,Adapter->ulFlashControlSectionStart,sizeof(sFlashCsInfo));
+ //
+ // Before updating the sector size in the reserved area, check if already present.
+ //
+ BeceemFlashBulkRead(Adapter, (PUINT)&sFlashCsInfo, Adapter->ulFlashControlSectionStart, sizeof(sFlashCsInfo));
uiSectorSig = ntohl(sFlashCsInfo.FlashSectorSizeSig);
uiCurrentSectorSize = ntohl(sFlashCsInfo.FlashSectorSize);
- if(uiSectorSig == FLASH_SECTOR_SIZE_SIG)
+ if (uiSectorSig == FLASH_SECTOR_SIZE_SIG)
{
-
- if((uiCurrentSectorSize <= MAX_SECTOR_SIZE) && (uiCurrentSectorSize >= MIN_SECTOR_SIZE))
+ if ((uiCurrentSectorSize <= MAX_SECTOR_SIZE) && (uiCurrentSectorSize >= MIN_SECTOR_SIZE))
{
- if(uiSectorSize == uiCurrentSectorSize)
+ if (uiSectorSize == uiCurrentSectorSize)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Provided sector size is same as programmed in Flash");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Provided sector size is same as programmed in Flash");
Status = STATUS_SUCCESS;
- goto Restore ;
+ goto Restore;
}
}
}
- if((uiSectorSize <= MAX_SECTOR_SIZE) && (uiSectorSize >= MIN_SECTOR_SIZE))
+ if ((uiSectorSize <= MAX_SECTOR_SIZE) && (uiSectorSize >= MIN_SECTOR_SIZE))
{
-
sFlashCsInfo.FlashSectorSize = htonl(uiSectorSize);
sFlashCsInfo.FlashSectorSizeSig = htonl(FLASH_SECTOR_SIZE_SIG);
Adapter->ulFlashControlSectionStart,
sizeof(sFlashCsInfo),
TRUE);
-
-
}
- Restore :
+Restore:
// restore the values.
- wrmalt(Adapter, 0x0f000C80,&uiTemp, sizeof(uiTemp));
-
+ wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
return Status;
-
}
//-----------------------------------------------------------------------------
UINT uiSectorSize = 0;
UINT uiSectorSig = 0;
- if(Adapter->bSectorSizeOverride &&
+ if (Adapter->bSectorSizeOverride &&
(Adapter->uiSectorSizeInCFG <= MAX_SECTOR_SIZE &&
- Adapter->uiSectorSizeInCFG >= MIN_SECTOR_SIZE))
+ Adapter->uiSectorSizeInCFG >= MIN_SECTOR_SIZE))
{
Adapter->uiSectorSize = Adapter->uiSectorSizeInCFG;
}
else
{
-
uiSectorSig = FlashSectorSizeSig;
- if(uiSectorSig == FLASH_SECTOR_SIZE_SIG)
+ if (uiSectorSig == FLASH_SECTOR_SIZE_SIG)
{
uiSectorSize = FlashSectorSize;
- //
- // If the sector size stored in the FLASH makes sense then use it.
- //
- if(uiSectorSize <= MAX_SECTOR_SIZE && uiSectorSize >= MIN_SECTOR_SIZE)
+ //
+ // If the sector size stored in the FLASH makes sense then use it.
+ //
+ if (uiSectorSize <= MAX_SECTOR_SIZE && uiSectorSize >= MIN_SECTOR_SIZE)
{
Adapter->uiSectorSize = uiSectorSize;
}
- //No valid size in FLASH, check if Config file has it.
- else if(Adapter->uiSectorSizeInCFG <= MAX_SECTOR_SIZE &&
- Adapter->uiSectorSizeInCFG >= MIN_SECTOR_SIZE)
+ //No valid size in FLASH, check if Config file has it.
+ else if (Adapter->uiSectorSizeInCFG <= MAX_SECTOR_SIZE &&
+ Adapter->uiSectorSizeInCFG >= MIN_SECTOR_SIZE)
{
Adapter->uiSectorSize = Adapter->uiSectorSizeInCFG;
}
- // Init to Default, if none of the above works.
+ // Init to Default, if none of the above works.
else
{
Adapter->uiSectorSize = DEFAULT_SECTOR_SIZE;
}
-
}
else
{
- if(Adapter->uiSectorSizeInCFG <= MAX_SECTOR_SIZE &&
- Adapter->uiSectorSizeInCFG >= MIN_SECTOR_SIZE)
+ if (Adapter->uiSectorSizeInCFG <= MAX_SECTOR_SIZE &&
+ Adapter->uiSectorSizeInCFG >= MIN_SECTOR_SIZE)
{
Adapter->uiSectorSize = Adapter->uiSectorSizeInCFG;
}
}
}
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Sector size :%x \n", Adapter->uiSectorSize);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Sector size :%x\n", Adapter->uiSectorSize);
+
return Adapter->uiSectorSize;
}
/* CHIP Bug : Clear the Avail bits on the Read queue. The default
* value on this register is supposed to be 0x00001102.
* But we get 0x00001122. */
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Fixing reset value on 0x0f003004 register\n" );
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Fixing reset value on 0x0f003004 register\n");
value = EEPROM_READ_DATA_AVAIL;
- wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
+ wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
/* Flush the all the EEPROM queues. */
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, " Flushing the queues\n");
- value =EEPROM_ALL_QUEUE_FLUSH ;
- wrmalt( Adapter, SPI_FLUSH_REG, &value, sizeof(value));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, " Flushing the queues\n");
+ value = EEPROM_ALL_QUEUE_FLUSH;
+ wrmalt(Adapter, SPI_FLUSH_REG, &value, sizeof(value));
value = 0;
- wrmalt( Adapter, SPI_FLUSH_REG, &value, sizeof(value) );
+ wrmalt(Adapter, SPI_FLUSH_REG, &value, sizeof(value));
/* Read the EEPROM Status Register. Just to see, no real purpose. */
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "EEPROM Status register value = %x\n", ReadEEPROMStatusRegister(Adapter) );
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "EEPROM Status register value = %x\n", ReadEEPROMStatusRegister(Adapter));
return STATUS_SUCCESS;
} /* BcmInitEEPROMQueues() */
BcmValidateNvmType(ps_adapter);
BcmInitEEPROMQueues(ps_adapter);
- if(ps_adapter->eNVMType == NVM_AUTODETECT)
+ if (ps_adapter->eNVMType == NVM_AUTODETECT)
{
ps_adapter->eNVMType = BcmGetNvmType(ps_adapter);
- if(ps_adapter->eNVMType == NVM_UNKNOWN)
+ if (ps_adapter->eNVMType == NVM_UNKNOWN)
{
- BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_PRINTK, 0, 0, "NVM Type is unknown!!\n");
+ BCM_DEBUG_PRINT(ps_adapter, DBG_TYPE_PRINTK, 0, 0, "NVM Type is unknown!!\n");
}
}
- else if(ps_adapter->eNVMType == NVM_FLASH)
+ else if (ps_adapter->eNVMType == NVM_FLASH)
{
BcmGetFlashCSInfo(ps_adapter);
}
return STATUS_SUCCESS;
}
+
/***************************************************************************/
/*BcmGetNvmSize : set the EEPROM or flash size in Adapter.
*
static INT BcmGetNvmSize(struct bcm_mini_adapter *Adapter)
{
- if(Adapter->eNVMType == NVM_EEPROM)
+ if (Adapter->eNVMType == NVM_EEPROM)
{
Adapter->uiNVMDSDSize = BcmGetEEPROMSize(Adapter);
}
- else if(Adapter->eNVMType == NVM_FLASH)
+ else if (Adapter->eNVMType == NVM_FLASH)
{
Adapter->uiNVMDSDSize = BcmGetFlashSize(Adapter);
}
// Returns:
// <VOID>
//-----------------------------------------------------------------------------
+
static VOID BcmValidateNvmType(struct bcm_mini_adapter *Adapter)
{
-
//
// if forcing the FLASH through CFG file, we should ensure device really has a FLASH.
// Accessing the FLASH address without the FLASH being present can cause hang/freeze etc.
// So if NVM_FLASH is selected for older chipsets, change it to AUTODETECT where EEPROM is 1st choice.
//
- if(Adapter->eNVMType == NVM_FLASH &&
+ if (Adapter->eNVMType == NVM_FLASH &&
Adapter->chip_id < 0xBECE3300)
{
Adapter->eNVMType = NVM_AUTODETECT;
}
}
+
//-----------------------------------------------------------------------------
// Procedure: BcmReadFlashRDID
//
// Returns:
// Flash ID
//-----------------------------------------------------------------------------
+
static ULONG BcmReadFlashRDID(struct bcm_mini_adapter *Adapter)
{
ULONG ulRDID = 0;
UINT value;
-//
-// Read ID Instruction.
-//
- value = (FLASH_CMD_READ_ID<<24);
- wrmalt(Adapter, FLASH_SPI_CMDQ_REG,&value, sizeof(value));
-//Delay
- udelay(10);
-//
-// Read SPI READQ REG. The output will be WWXXYYZZ.
-// The ID is 3Bytes long and is WWXXYY. ZZ needs to be Ignored.
-//
- rdmalt(Adapter, FLASH_SPI_READQ_REG, (PUINT)&ulRDID, sizeof(ulRDID));
+ //
+ // Read ID Instruction.
+ //
+ value = (FLASH_CMD_READ_ID << 24);
+ wrmalt(Adapter, FLASH_SPI_CMDQ_REG, &value, sizeof(value));
- return (ulRDID >>8);
+ //Delay
+ udelay(10);
+ //
+ // Read SPI READQ REG. The output will be WWXXYYZZ.
+ // The ID is 3Bytes long and is WWXXYY. ZZ needs to be Ignored.
+ //
+ rdmalt(Adapter, FLASH_SPI_READQ_REG, (PUINT)&ulRDID, sizeof(ulRDID));
+ return (ulRDID >> 8);
}
INT BcmAllocFlashCSStructure(struct bcm_mini_adapter *psAdapter)
{
- if(psAdapter == NULL)
+ if (psAdapter == NULL)
{
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_PRINTK, 0, 0, "Adapter structure point is NULL");
+ BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_PRINTK, 0, 0, "Adapter structure point is NULL");
return -EINVAL;
}
psAdapter->psFlashCSInfo = (PFLASH_CS_INFO)kzalloc(sizeof(FLASH_CS_INFO), GFP_KERNEL);
- if(psAdapter->psFlashCSInfo == NULL)
+ if (psAdapter->psFlashCSInfo == NULL)
{
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_PRINTK, 0, 0,"Can't Allocate memory for Flash 1.x");
+ BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_PRINTK, 0, 0, "Can't Allocate memory for Flash 1.x");
return -ENOMEM;
}
psAdapter->psFlash2xCSInfo = (PFLASH2X_CS_INFO)kzalloc(sizeof(FLASH2X_CS_INFO), GFP_KERNEL);
- if(psAdapter->psFlash2xCSInfo == NULL)
+ if (psAdapter->psFlash2xCSInfo == NULL)
{
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_PRINTK, 0, 0,"Can't Allocate memory for Flash 2.x");
+ BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_PRINTK, 0, 0, "Can't Allocate memory for Flash 2.x");
kfree(psAdapter->psFlashCSInfo);
return -ENOMEM;
}
psAdapter->psFlash2xVendorInfo = (PFLASH2X_VENDORSPECIFIC_INFO)kzalloc(sizeof(FLASH2X_VENDORSPECIFIC_INFO), GFP_KERNEL);
- if(psAdapter->psFlash2xVendorInfo == NULL)
+ if (psAdapter->psFlash2xVendorInfo == NULL)
{
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_PRINTK, 0, 0,"Can't Allocate Vendor Info Memory for Flash 2.x");
+ BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_PRINTK, 0, 0, "Can't Allocate Vendor Info Memory for Flash 2.x");
kfree(psAdapter->psFlashCSInfo);
kfree(psAdapter->psFlash2xCSInfo);
return -ENOMEM;
INT BcmDeAllocFlashCSStructure(struct bcm_mini_adapter *psAdapter)
{
- if(psAdapter == NULL)
+ if (psAdapter == NULL)
{
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_PRINTK, 0, 0," Adapter structure point is NULL");
+ BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_PRINTK, 0, 0, "Adapter structure point is NULL");
return -EINVAL;
}
kfree(psAdapter->psFlashCSInfo);
kfree(psAdapter->psFlash2xCSInfo);
kfree(psAdapter->psFlash2xVendorInfo);
- return STATUS_SUCCESS ;
+ return STATUS_SUCCESS;
}
-static INT BcmDumpFlash2XCSStructure(PFLASH2X_CS_INFO psFlash2xCSInfo,struct bcm_mini_adapter *Adapter)
+static INT BcmDumpFlash2XCSStructure(PFLASH2X_CS_INFO psFlash2xCSInfo, struct bcm_mini_adapter *Adapter)
{
UINT Index = 0;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "**********************FLASH2X CS Structure *******************");
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Signature is :%x", (psFlash2xCSInfo->MagicNumber));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Flash Major Version :%d", MAJOR_VERSION(psFlash2xCSInfo->FlashLayoutVersion));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Flash Minor Version :%d", MINOR_VERSION(psFlash2xCSInfo->FlashLayoutVersion));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, " ISOImageMajorVersion:0x%x", (psFlash2xCSInfo->ISOImageVersion));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SCSIFirmwareMajorVersion :0x%x", (psFlash2xCSInfo->SCSIFirmwareVersion));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForPart1ISOImage :0x%x", (psFlash2xCSInfo->OffsetFromZeroForPart1ISOImage));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForScsiFirmware :0x%x", (psFlash2xCSInfo->OffsetFromZeroForScsiFirmware));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SizeOfScsiFirmware :0x%x", (psFlash2xCSInfo->SizeOfScsiFirmware ));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForPart2ISOImage :0x%x", (psFlash2xCSInfo->OffsetFromZeroForPart2ISOImage));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSDStart :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSDStart));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSDEnd :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSDEnd));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSAStart :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSAStart));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSAEnd :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSAEnd));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForControlSectionStart :0x%x", (psFlash2xCSInfo->OffsetFromZeroForControlSectionStart));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForControlSectionData :0x%x", (psFlash2xCSInfo->OffsetFromZeroForControlSectionData));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "CDLessInactivityTimeout :0x%x", (psFlash2xCSInfo->CDLessInactivityTimeout));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "NewImageSignature :0x%x", (psFlash2xCSInfo->NewImageSignature));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashSectorSizeSig :0x%x", (psFlash2xCSInfo->FlashSectorSizeSig));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashSectorSize :0x%x", (psFlash2xCSInfo->FlashSectorSize));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashWriteSupportSize :0x%x", (psFlash2xCSInfo->FlashWriteSupportSize));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "TotalFlashSize :0x%X", (psFlash2xCSInfo->TotalFlashSize));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashBaseAddr :0x%x", (psFlash2xCSInfo->FlashBaseAddr));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashPartMaxSize :0x%x", (psFlash2xCSInfo->FlashPartMaxSize));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "IsCDLessDeviceBootSig :0x%x", (psFlash2xCSInfo->IsCDLessDeviceBootSig));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "MassStorageTimeout :0x%x", (psFlash2xCSInfo->MassStorageTimeout));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part1Start :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part1Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part1End :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part1End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part2Start :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part2Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part2End :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part2End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part3Start :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part3Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part3End :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part3End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part1Start :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part1Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part1End :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part1End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part2Start :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part2Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part2End :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part2End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part3Start :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part3Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part3End :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part3End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromDSDStartForDSDHeader :0x%x", (psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD1Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD1Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD1End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD1End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD2Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD2Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD2End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD2End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA1Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA1Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA1End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA1End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA2Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA2Start));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA2End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA2End));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Sector Access Bit Map is Defined as :");
- for(Index =0; Index <(FLASH2X_TOTAL_SIZE/(DEFAULT_SECTOR_SIZE *16)); Index++)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectorAccessBitMap[%d] :0x%x", Index,
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "**********************FLASH2X CS Structure *******************");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Signature is :%x", (psFlash2xCSInfo->MagicNumber));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Flash Major Version :%d", MAJOR_VERSION(psFlash2xCSInfo->FlashLayoutVersion));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Flash Minor Version :%d", MINOR_VERSION(psFlash2xCSInfo->FlashLayoutVersion));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, " ISOImageMajorVersion:0x%x", (psFlash2xCSInfo->ISOImageVersion));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SCSIFirmwareMajorVersion :0x%x", (psFlash2xCSInfo->SCSIFirmwareVersion));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForPart1ISOImage :0x%x", (psFlash2xCSInfo->OffsetFromZeroForPart1ISOImage));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForScsiFirmware :0x%x", (psFlash2xCSInfo->OffsetFromZeroForScsiFirmware));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SizeOfScsiFirmware :0x%x", (psFlash2xCSInfo->SizeOfScsiFirmware));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForPart2ISOImage :0x%x", (psFlash2xCSInfo->OffsetFromZeroForPart2ISOImage));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSDStart :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSDStart));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSDEnd :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSDEnd));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSAStart :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSAStart));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSAEnd :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSAEnd));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForControlSectionStart :0x%x", (psFlash2xCSInfo->OffsetFromZeroForControlSectionStart));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForControlSectionData :0x%x", (psFlash2xCSInfo->OffsetFromZeroForControlSectionData));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "CDLessInactivityTimeout :0x%x", (psFlash2xCSInfo->CDLessInactivityTimeout));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "NewImageSignature :0x%x", (psFlash2xCSInfo->NewImageSignature));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashSectorSizeSig :0x%x", (psFlash2xCSInfo->FlashSectorSizeSig));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashSectorSize :0x%x", (psFlash2xCSInfo->FlashSectorSize));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashWriteSupportSize :0x%x", (psFlash2xCSInfo->FlashWriteSupportSize));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "TotalFlashSize :0x%X", (psFlash2xCSInfo->TotalFlashSize));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashBaseAddr :0x%x", (psFlash2xCSInfo->FlashBaseAddr));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FlashPartMaxSize :0x%x", (psFlash2xCSInfo->FlashPartMaxSize));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "IsCDLessDeviceBootSig :0x%x", (psFlash2xCSInfo->IsCDLessDeviceBootSig));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "MassStorageTimeout :0x%x", (psFlash2xCSInfo->MassStorageTimeout));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part1Start :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part1Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part1End :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part1End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part2Start :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part2Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part2End :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part2End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part3Start :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part3Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage1Part3End :0x%x", (psFlash2xCSInfo->OffsetISOImage1Part3End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part1Start :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part1Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part1End :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part1End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part2Start :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part2Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part2End :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part2End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part3Start :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part3Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetISOImage2Part3End :0x%x", (psFlash2xCSInfo->OffsetISOImage2Part3End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromDSDStartForDSDHeader :0x%x", (psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD1Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD1Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD1End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD1End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD2Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD2Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForDSD2End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForDSD2End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA1Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA1Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA1End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA1End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA2Start :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA2Start));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "OffsetFromZeroForVSA2End :0x%x", (psFlash2xCSInfo->OffsetFromZeroForVSA2End));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Sector Access Bit Map is Defined as :");
+
+ for (Index = 0; Index < (FLASH2X_TOTAL_SIZE / (DEFAULT_SECTOR_SIZE * 16)); Index++)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectorAccessBitMap[%d] :0x%x", Index,
(psFlash2xCSInfo->SectorAccessBitMap[Index]));
}
return STATUS_SUCCESS;
}
-
-static INT ConvertEndianOf2XCSStructure(PFLASH2X_CS_INFO psFlash2xCSInfo)
+static INT ConvertEndianOf2XCSStructure(PFLASH2X_CS_INFO psFlash2xCSInfo)
{
UINT Index = 0;
+
psFlash2xCSInfo->MagicNumber = ntohl(psFlash2xCSInfo->MagicNumber);
- psFlash2xCSInfo->FlashLayoutVersion= ntohl(psFlash2xCSInfo->FlashLayoutVersion);
+ psFlash2xCSInfo->FlashLayoutVersion = ntohl(psFlash2xCSInfo->FlashLayoutVersion);
//psFlash2xCSInfo->FlashLayoutMinorVersion = ntohs(psFlash2xCSInfo->FlashLayoutMinorVersion);
psFlash2xCSInfo->ISOImageVersion = ntohl(psFlash2xCSInfo->ISOImageVersion);
- psFlash2xCSInfo->SCSIFirmwareVersion =ntohl(psFlash2xCSInfo->SCSIFirmwareVersion);
+ psFlash2xCSInfo->SCSIFirmwareVersion = ntohl(psFlash2xCSInfo->SCSIFirmwareVersion);
psFlash2xCSInfo->OffsetFromZeroForPart1ISOImage = ntohl(psFlash2xCSInfo->OffsetFromZeroForPart1ISOImage);
psFlash2xCSInfo->OffsetFromZeroForScsiFirmware = ntohl(psFlash2xCSInfo->OffsetFromZeroForScsiFirmware);
- psFlash2xCSInfo->SizeOfScsiFirmware = ntohl(psFlash2xCSInfo->SizeOfScsiFirmware );
+ psFlash2xCSInfo->SizeOfScsiFirmware = ntohl(psFlash2xCSInfo->SizeOfScsiFirmware);
psFlash2xCSInfo->OffsetFromZeroForPart2ISOImage = ntohl(psFlash2xCSInfo->OffsetFromZeroForPart2ISOImage);
psFlash2xCSInfo->OffsetFromZeroForDSDStart = ntohl(psFlash2xCSInfo->OffsetFromZeroForDSDStart);
psFlash2xCSInfo->OffsetFromZeroForDSDEnd = ntohl(psFlash2xCSInfo->OffsetFromZeroForDSDEnd);
psFlash2xCSInfo->OffsetFromZeroForVSA1End = ntohl(psFlash2xCSInfo->OffsetFromZeroForVSA1End);
psFlash2xCSInfo->OffsetFromZeroForVSA2Start = ntohl(psFlash2xCSInfo->OffsetFromZeroForVSA2Start);
psFlash2xCSInfo->OffsetFromZeroForVSA2End = ntohl(psFlash2xCSInfo->OffsetFromZeroForVSA2End);
- for(Index =0; Index <(FLASH2X_TOTAL_SIZE/(DEFAULT_SECTOR_SIZE *16)); Index++)
+
+ for (Index = 0; Index < (FLASH2X_TOTAL_SIZE / (DEFAULT_SECTOR_SIZE * 16)); Index++)
{
- psFlash2xCSInfo->SectorAccessBitMap[Index] = ntohl(psFlash2xCSInfo->SectorAccessBitMap[Index]);
+ psFlash2xCSInfo->SectorAccessBitMap[Index] = ntohl(psFlash2xCSInfo->SectorAccessBitMap[Index]);
}
return STATUS_SUCCESS;
}
-static INT ConvertEndianOfCSStructure(PFLASH_CS_INFO psFlashCSInfo)
+static INT ConvertEndianOfCSStructure(PFLASH_CS_INFO psFlashCSInfo)
{
//UINT Index = 0;
- psFlashCSInfo->MagicNumber =ntohl(psFlashCSInfo->MagicNumber);
- psFlashCSInfo->FlashLayoutVersion =ntohl(psFlashCSInfo->FlashLayoutVersion);
- psFlashCSInfo->ISOImageVersion = ntohl(psFlashCSInfo->ISOImageVersion);
+ psFlashCSInfo->MagicNumber = ntohl(psFlashCSInfo->MagicNumber);
+ psFlashCSInfo->FlashLayoutVersion = ntohl(psFlashCSInfo->FlashLayoutVersion);
+ psFlashCSInfo->ISOImageVersion = ntohl(psFlashCSInfo->ISOImageVersion);
//won't convert according to old assumption
- psFlashCSInfo->SCSIFirmwareVersion =(psFlashCSInfo->SCSIFirmwareVersion);
-
- psFlashCSInfo->OffsetFromZeroForPart1ISOImage = ntohl(psFlashCSInfo->OffsetFromZeroForPart1ISOImage);
- psFlashCSInfo->OffsetFromZeroForScsiFirmware = ntohl(psFlashCSInfo->OffsetFromZeroForScsiFirmware);
- psFlashCSInfo->SizeOfScsiFirmware = ntohl(psFlashCSInfo->SizeOfScsiFirmware );
- psFlashCSInfo->OffsetFromZeroForPart2ISOImage = ntohl(psFlashCSInfo->OffsetFromZeroForPart2ISOImage);
- psFlashCSInfo->OffsetFromZeroForCalibrationStart = ntohl(psFlashCSInfo->OffsetFromZeroForCalibrationStart);
- psFlashCSInfo->OffsetFromZeroForCalibrationEnd = ntohl(psFlashCSInfo->OffsetFromZeroForCalibrationEnd);
- psFlashCSInfo->OffsetFromZeroForVSAStart = ntohl(psFlashCSInfo->OffsetFromZeroForVSAStart);
- psFlashCSInfo->OffsetFromZeroForVSAEnd = ntohl(psFlashCSInfo->OffsetFromZeroForVSAEnd);
- psFlashCSInfo->OffsetFromZeroForControlSectionStart = ntohl(psFlashCSInfo->OffsetFromZeroForControlSectionStart);
- psFlashCSInfo->OffsetFromZeroForControlSectionData = ntohl(psFlashCSInfo->OffsetFromZeroForControlSectionData);
- psFlashCSInfo->CDLessInactivityTimeout = ntohl(psFlashCSInfo->CDLessInactivityTimeout);
- psFlashCSInfo->NewImageSignature = ntohl(psFlashCSInfo->NewImageSignature);
- psFlashCSInfo->FlashSectorSizeSig = ntohl(psFlashCSInfo->FlashSectorSizeSig);
- psFlashCSInfo->FlashSectorSize = ntohl(psFlashCSInfo->FlashSectorSize);
- psFlashCSInfo->FlashWriteSupportSize = ntohl(psFlashCSInfo->FlashWriteSupportSize);
- psFlashCSInfo->TotalFlashSize = ntohl(psFlashCSInfo->TotalFlashSize);
- psFlashCSInfo->FlashBaseAddr = ntohl(psFlashCSInfo->FlashBaseAddr);
- psFlashCSInfo->FlashPartMaxSize = ntohl(psFlashCSInfo->FlashPartMaxSize);
- psFlashCSInfo->IsCDLessDeviceBootSig = ntohl(psFlashCSInfo->IsCDLessDeviceBootSig);
- psFlashCSInfo->MassStorageTimeout = ntohl(psFlashCSInfo->MassStorageTimeout);
+ psFlashCSInfo->SCSIFirmwareVersion = (psFlashCSInfo->SCSIFirmwareVersion);
+ psFlashCSInfo->OffsetFromZeroForPart1ISOImage = ntohl(psFlashCSInfo->OffsetFromZeroForPart1ISOImage);
+ psFlashCSInfo->OffsetFromZeroForScsiFirmware = ntohl(psFlashCSInfo->OffsetFromZeroForScsiFirmware);
+ psFlashCSInfo->SizeOfScsiFirmware = ntohl(psFlashCSInfo->SizeOfScsiFirmware);
+ psFlashCSInfo->OffsetFromZeroForPart2ISOImage = ntohl(psFlashCSInfo->OffsetFromZeroForPart2ISOImage);
+ psFlashCSInfo->OffsetFromZeroForCalibrationStart = ntohl(psFlashCSInfo->OffsetFromZeroForCalibrationStart);
+ psFlashCSInfo->OffsetFromZeroForCalibrationEnd = ntohl(psFlashCSInfo->OffsetFromZeroForCalibrationEnd);
+ psFlashCSInfo->OffsetFromZeroForVSAStart = ntohl(psFlashCSInfo->OffsetFromZeroForVSAStart);
+ psFlashCSInfo->OffsetFromZeroForVSAEnd = ntohl(psFlashCSInfo->OffsetFromZeroForVSAEnd);
+ psFlashCSInfo->OffsetFromZeroForControlSectionStart = ntohl(psFlashCSInfo->OffsetFromZeroForControlSectionStart);
+ psFlashCSInfo->OffsetFromZeroForControlSectionData = ntohl(psFlashCSInfo->OffsetFromZeroForControlSectionData);
+ psFlashCSInfo->CDLessInactivityTimeout = ntohl(psFlashCSInfo->CDLessInactivityTimeout);
+ psFlashCSInfo->NewImageSignature = ntohl(psFlashCSInfo->NewImageSignature);
+ psFlashCSInfo->FlashSectorSizeSig = ntohl(psFlashCSInfo->FlashSectorSizeSig);
+ psFlashCSInfo->FlashSectorSize = ntohl(psFlashCSInfo->FlashSectorSize);
+ psFlashCSInfo->FlashWriteSupportSize = ntohl(psFlashCSInfo->FlashWriteSupportSize);
+ psFlashCSInfo->TotalFlashSize = ntohl(psFlashCSInfo->TotalFlashSize);
+ psFlashCSInfo->FlashBaseAddr = ntohl(psFlashCSInfo->FlashBaseAddr);
+ psFlashCSInfo->FlashPartMaxSize = ntohl(psFlashCSInfo->FlashPartMaxSize);
+ psFlashCSInfo->IsCDLessDeviceBootSig = ntohl(psFlashCSInfo->IsCDLessDeviceBootSig);
+ psFlashCSInfo->MassStorageTimeout = ntohl(psFlashCSInfo->MassStorageTimeout);
return STATUS_SUCCESS;
}
static INT IsSectionExistInVendorInfo(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL section)
{
- return ( Adapter->uiVendorExtnFlag &&
- (Adapter->psFlash2xVendorInfo->VendorSection[section].AccessFlags & FLASH2X_SECTION_PRESENT) &&
- (Adapter->psFlash2xVendorInfo->VendorSection[section].OffsetFromZeroForSectionStart != UNINIT_PTR_IN_CS) );
+ return (Adapter->uiVendorExtnFlag &&
+ (Adapter->psFlash2xVendorInfo->VendorSection[section].AccessFlags & FLASH2X_SECTION_PRESENT) &&
+ (Adapter->psFlash2xVendorInfo->VendorSection[section].OffsetFromZeroForSectionStart != UNINIT_PTR_IN_CS));
}
static VOID UpdateVendorInfo(struct bcm_mini_adapter *Adapter)
Adapter->uiVendorExtnFlag = FALSE;
- for(i = 0;i < TOTAL_SECTIONS;i++)
+ for (i = 0; i < TOTAL_SECTIONS; i++)
Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart = UNINIT_PTR_IN_CS;
- if(STATUS_SUCCESS != vendorextnGetSectionInfo(Adapter, Adapter->psFlash2xVendorInfo))
+ if (STATUS_SUCCESS != vendorextnGetSectionInfo(Adapter, Adapter->psFlash2xVendorInfo))
return;
i = 0;
- while(i < TOTAL_SECTIONS)
+ while (i < TOTAL_SECTIONS)
{
- if(!(Adapter->psFlash2xVendorInfo->VendorSection[i].AccessFlags & FLASH2X_SECTION_PRESENT))
+ if (!(Adapter->psFlash2xVendorInfo->VendorSection[i].AccessFlags & FLASH2X_SECTION_PRESENT))
{
i++;
continue;
Adapter->uiVendorExtnFlag = TRUE;
uiSizeSection = (Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionEnd -
- Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart);
+ Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart);
- switch(i)
+ switch (i)
{
- case DSD0:
- if(( uiSizeSection >= (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER))) &&
- (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart))
- Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDEnd = VENDOR_PTR_IN_CS;
- else
- Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDEnd = UNINIT_PTR_IN_CS;
- break;
+ case DSD0:
+ if ((uiSizeSection >= (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER))) &&
+ (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart))
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDEnd = VENDOR_PTR_IN_CS;
+ else
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDEnd = UNINIT_PTR_IN_CS;
+ break;
- case DSD1:
- if(( uiSizeSection >= (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER))) &&
- (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart))
- Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1End = VENDOR_PTR_IN_CS;
- else
- Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1End = UNINIT_PTR_IN_CS;
- break;
+ case DSD1:
+ if ((uiSizeSection >= (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER))) &&
+ (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart))
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1End = VENDOR_PTR_IN_CS;
+ else
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1End = UNINIT_PTR_IN_CS;
+ break;
- case DSD2:
- if(( uiSizeSection >= (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER))) &&
- (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart))
- Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2End = VENDOR_PTR_IN_CS;
- else
- Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2End = UNINIT_PTR_IN_CS;
- break;
- case VSA0:
- if(UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart)
- Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAEnd = VENDOR_PTR_IN_CS;
- else
- Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAEnd = UNINIT_PTR_IN_CS;
- break;
+ case DSD2:
+ if ((uiSizeSection >= (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER))) &&
+ (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart))
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2End = VENDOR_PTR_IN_CS;
+ else
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2End = UNINIT_PTR_IN_CS;
+ break;
+ case VSA0:
+ if (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart)
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAEnd = VENDOR_PTR_IN_CS;
+ else
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAEnd = UNINIT_PTR_IN_CS;
+ break;
- case VSA1:
- if(UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart)
- Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1End = VENDOR_PTR_IN_CS;
- else
- Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1End = UNINIT_PTR_IN_CS;
- break;
- case VSA2:
- if(UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart)
- Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2End = VENDOR_PTR_IN_CS;
- else
- Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2End = UNINIT_PTR_IN_CS;
- break;
+ case VSA1:
+ if (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart)
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1End = VENDOR_PTR_IN_CS;
+ else
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1End = UNINIT_PTR_IN_CS;
+ break;
+ case VSA2:
+ if (UNINIT_PTR_IN_CS != Adapter->psFlash2xVendorInfo->VendorSection[i].OffsetFromZeroForSectionStart)
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2End = VENDOR_PTR_IN_CS;
+ else
+ Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start = Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2End = UNINIT_PTR_IN_CS;
+ break;
- default:
- break;
+ default:
+ break;
}
i++;
}
-
}
//-----------------------------------------------------------------------------
{
//FLASH_CS_INFO sFlashCsInfo = {0};
-#if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
- UINT value;
-#endif
+ #if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
+ UINT value;
+ #endif
+
UINT uiFlashLayoutMajorVersion;
Adapter->uiFlashLayoutMinorVersion = 0;
Adapter->uiFlashLayoutMajorVersion = 0;
Adapter->ulFlashControlSectionStart = FLASH_CS_INFO_START_ADDR;
-
Adapter->uiFlashBaseAdd = 0;
Adapter->ulFlashCalStart = 0;
- memset(Adapter->psFlashCSInfo, 0 ,sizeof(FLASH_CS_INFO));
- memset(Adapter->psFlash2xCSInfo, 0 ,sizeof(FLASH2X_CS_INFO));
+ memset(Adapter->psFlashCSInfo, 0 , sizeof(FLASH_CS_INFO));
+ memset(Adapter->psFlash2xCSInfo, 0 , sizeof(FLASH2X_CS_INFO));
- if(!Adapter->bDDRInitDone)
+ if (!Adapter->bDDRInitDone)
{
{
value = FLASH_CONTIGIOUS_START_ADDR_BEFORE_INIT;
}
}
-
// Reading first 8 Bytes to get the Flash Layout
// MagicNumber(4 bytes) +FlashLayoutMinorVersion(2 Bytes) +FlashLayoutMajorVersion(2 Bytes)
- BeceemFlashBulkRead(Adapter,(PUINT)Adapter->psFlashCSInfo,Adapter->ulFlashControlSectionStart,8);
+ BeceemFlashBulkRead(Adapter, (PUINT)Adapter->psFlashCSInfo, Adapter->ulFlashControlSectionStart, 8);
Adapter->psFlashCSInfo->FlashLayoutVersion = ntohl(Adapter->psFlashCSInfo->FlashLayoutVersion);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Flash Layout Version :%X", (Adapter->psFlashCSInfo->FlashLayoutVersion));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Flash Layout Version :%X", (Adapter->psFlashCSInfo->FlashLayoutVersion));
//BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Flash Layout Minor Version :%d\n", ntohs(sFlashCsInfo.FlashLayoutMinorVersion));
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Signature is :%x\n", ntohl(Adapter->psFlashCSInfo->MagicNumber));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Signature is :%x\n", ntohl(Adapter->psFlashCSInfo->MagicNumber));
- if(FLASH_CONTROL_STRUCT_SIGNATURE == ntohl(Adapter->psFlashCSInfo->MagicNumber))
+ if (FLASH_CONTROL_STRUCT_SIGNATURE == ntohl(Adapter->psFlashCSInfo->MagicNumber))
{
uiFlashLayoutMajorVersion = MAJOR_VERSION((Adapter->psFlashCSInfo->FlashLayoutVersion));
Adapter->uiFlashLayoutMinorVersion = MINOR_VERSION((Adapter->psFlashCSInfo->FlashLayoutVersion));
uiFlashLayoutMajorVersion = 0;
}
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"FLASH LAYOUT MAJOR VERSION :%X", uiFlashLayoutMajorVersion);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "FLASH LAYOUT MAJOR VERSION :%X", uiFlashLayoutMajorVersion);
- if(uiFlashLayoutMajorVersion < FLASH_2X_MAJOR_NUMBER)
+ if (uiFlashLayoutMajorVersion < FLASH_2X_MAJOR_NUMBER)
{
- BeceemFlashBulkRead(Adapter,(PUINT)Adapter->psFlashCSInfo,Adapter->ulFlashControlSectionStart,sizeof(FLASH_CS_INFO));
+ BeceemFlashBulkRead(Adapter, (PUINT)Adapter->psFlashCSInfo, Adapter->ulFlashControlSectionStart, sizeof(FLASH_CS_INFO));
ConvertEndianOfCSStructure(Adapter->psFlashCSInfo);
Adapter->ulFlashCalStart = (Adapter->psFlashCSInfo->OffsetFromZeroForCalibrationStart);
- if(!((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1)))
+ if (!((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1)))
{
Adapter->ulFlashControlSectionStart = Adapter->psFlashCSInfo->OffsetFromZeroForControlSectionStart;
}
- if((FLASH_CONTROL_STRUCT_SIGNATURE == (Adapter->psFlashCSInfo->MagicNumber)) &&
- (SCSI_FIRMWARE_MINOR_VERSION <= MINOR_VERSION(Adapter->psFlashCSInfo->SCSIFirmwareVersion)) &&
- (FLASH_SECTOR_SIZE_SIG == (Adapter->psFlashCSInfo->FlashSectorSizeSig)) &&
- (BYTE_WRITE_SUPPORT == (Adapter->psFlashCSInfo->FlashWriteSupportSize)))
+ if ((FLASH_CONTROL_STRUCT_SIGNATURE == (Adapter->psFlashCSInfo->MagicNumber)) &&
+ (SCSI_FIRMWARE_MINOR_VERSION <= MINOR_VERSION(Adapter->psFlashCSInfo->SCSIFirmwareVersion)) &&
+ (FLASH_SECTOR_SIZE_SIG == (Adapter->psFlashCSInfo->FlashSectorSizeSig)) &&
+ (BYTE_WRITE_SUPPORT == (Adapter->psFlashCSInfo->FlashWriteSupportSize)))
{
Adapter->ulFlashWriteSize = (Adapter->psFlashCSInfo->FlashWriteSupportSize);
- Adapter->fpFlashWrite = flashByteWrite;
- Adapter->fpFlashWriteWithStatusCheck = flashByteWriteStatus;
+ Adapter->fpFlashWrite = flashByteWrite;
+ Adapter->fpFlashWriteWithStatusCheck = flashByteWriteStatus;
}
else
{
Adapter->ulFlashWriteSize = MAX_RW_SIZE;
Adapter->fpFlashWrite = flashWrite;
- Adapter->fpFlashWriteWithStatusCheck = flashWriteStatus;
+ Adapter->fpFlashWriteWithStatusCheck = flashWriteStatus;
}
BcmGetFlashSectorSize(Adapter, (Adapter->psFlashCSInfo->FlashSectorSizeSig),
- (Adapter->psFlashCSInfo->FlashSectorSize));
-
-
+ (Adapter->psFlashCSInfo->FlashSectorSize));
Adapter->uiFlashBaseAdd = Adapter->psFlashCSInfo->FlashBaseAddr & 0xFCFFFFFF;
-
-
}
else
{
- if(BcmFlash2xBulkRead(Adapter,(PUINT)Adapter->psFlash2xCSInfo,NO_SECTION_VAL,
- Adapter->ulFlashControlSectionStart,sizeof(FLASH2X_CS_INFO)))
+ if (BcmFlash2xBulkRead(Adapter, (PUINT)Adapter->psFlash2xCSInfo, NO_SECTION_VAL,
+ Adapter->ulFlashControlSectionStart, sizeof(FLASH2X_CS_INFO)))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Unable to read CS structure \n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to read CS structure\n");
return STATUS_FAILURE;
}
+
ConvertEndianOf2XCSStructure(Adapter->psFlash2xCSInfo);
- BcmDumpFlash2XCSStructure(Adapter->psFlash2xCSInfo,Adapter);
- if((FLASH_CONTROL_STRUCT_SIGNATURE == Adapter->psFlash2xCSInfo->MagicNumber) &&
- (SCSI_FIRMWARE_MINOR_VERSION <= MINOR_VERSION(Adapter->psFlash2xCSInfo->SCSIFirmwareVersion)) &&
- (FLASH_SECTOR_SIZE_SIG == Adapter->psFlash2xCSInfo->FlashSectorSizeSig) &&
- (BYTE_WRITE_SUPPORT == Adapter->psFlash2xCSInfo->FlashWriteSupportSize))
+ BcmDumpFlash2XCSStructure(Adapter->psFlash2xCSInfo, Adapter);
+ if ((FLASH_CONTROL_STRUCT_SIGNATURE == Adapter->psFlash2xCSInfo->MagicNumber) &&
+ (SCSI_FIRMWARE_MINOR_VERSION <= MINOR_VERSION(Adapter->psFlash2xCSInfo->SCSIFirmwareVersion)) &&
+ (FLASH_SECTOR_SIZE_SIG == Adapter->psFlash2xCSInfo->FlashSectorSizeSig) &&
+ (BYTE_WRITE_SUPPORT == Adapter->psFlash2xCSInfo->FlashWriteSupportSize))
{
Adapter->ulFlashWriteSize = Adapter->psFlash2xCSInfo->FlashWriteSupportSize;
- Adapter->fpFlashWrite = flashByteWrite;
- Adapter->fpFlashWriteWithStatusCheck = flashByteWriteStatus;
+ Adapter->fpFlashWrite = flashByteWrite;
+ Adapter->fpFlashWriteWithStatusCheck = flashByteWriteStatus;
}
else
{
Adapter->ulFlashWriteSize = MAX_RW_SIZE;
Adapter->fpFlashWrite = flashWrite;
- Adapter->fpFlashWriteWithStatusCheck = flashWriteStatus;
+ Adapter->fpFlashWriteWithStatusCheck = flashWriteStatus;
}
BcmGetFlashSectorSize(Adapter, Adapter->psFlash2xCSInfo->FlashSectorSizeSig,
- Adapter->psFlash2xCSInfo->FlashSectorSize);
+ Adapter->psFlash2xCSInfo->FlashSectorSize);
UpdateVendorInfo(Adapter);
BcmGetActiveISO(Adapter);
Adapter->uiFlashBaseAdd = Adapter->psFlash2xCSInfo->FlashBaseAddr & 0xFCFFFFFF;
Adapter->ulFlashControlSectionStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForControlSectionStart;
-
}
/*
- Concerns: what if CS sector size does not match with this sector size ???
- what is the indication of AccessBitMap in CS in flash 2.x ????
+ Concerns: what if CS sector size does not match with this sector size ???
+ what is the indication of AccessBitMap in CS in flash 2.x ????
*/
Adapter->ulFlashID = BcmReadFlashRDID(Adapter);
-
Adapter->uiFlashLayoutMajorVersion = uiFlashLayoutMajorVersion;
-
- return STATUS_SUCCESS ;
+ return STATUS_SUCCESS;
}
-
//-----------------------------------------------------------------------------
// Procedure: BcmGetNvmType
//
{
UINT uiData = 0;
- BeceemEEPROMBulkRead(Adapter,&uiData,0x0,4);
- if(uiData == BECM)
+ BeceemEEPROMBulkRead(Adapter, &uiData, 0x0, 4);
+ if (uiData == BECM)
{
return NVM_EEPROM;
}
+
//
// Read control struct and get cal addresses before accessing the flash
//
BcmGetFlashCSInfo(Adapter);
- BeceemFlashBulkRead(Adapter,&uiData,0x0 + Adapter->ulFlashCalStart,4);
- if(uiData == BECM)
+ BeceemFlashBulkRead(Adapter, &uiData, 0x0 + Adapter->ulFlashCalStart, 4);
+ if (uiData == BECM)
{
return NVM_FLASH;
}
-//
-// even if there is no valid signature on EEPROM/FLASH find out if they really exist.
-// if exist select it.
-//
- if(BcmGetEEPROMSize(Adapter))
+
+ //
+ // even if there is no valid signature on EEPROM/FLASH find out if they really exist.
+ // if exist select it.
+ //
+ if (BcmGetEEPROMSize(Adapter))
{
return NVM_EEPROM;
}
-//TBD for Flash.
-
-
+ //TBD for Flash.
return NVM_UNKNOWN;
}
INT BcmGetSectionValStartOffset(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlashSectionVal)
{
/*
- * Considering all the section for which end offset can be calculated or directly given
- * in CS Structure. if matching case does not exist, return STATUS_FAILURE indicating section
- * endoffset can't be calculated or given in CS Structure.
- */
+ * Considering all the section for which end offset can be calculated or directly given
+ * in CS Structure. if matching case does not exist, return STATUS_FAILURE indicating section
+ * endoffset can't be calculated or given in CS Structure.
+ */
- INT SectStartOffset = 0 ;
+ INT SectStartOffset = 0;
- SectStartOffset = INVALID_OFFSET ;
+ SectStartOffset = INVALID_OFFSET;
- if(IsSectionExistInVendorInfo(Adapter,eFlashSectionVal))
+ if (IsSectionExistInVendorInfo(Adapter, eFlashSectionVal))
{
return Adapter->psFlash2xVendorInfo->VendorSection[eFlashSectionVal].OffsetFromZeroForSectionStart;
}
- switch(eFlashSectionVal)
- {
- case ISO_IMAGE1 :
- if((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start != UNINIT_PTR_IN_CS) &&
- (IsNonCDLessDevice(Adapter) == FALSE))
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start);
- break;
- case ISO_IMAGE2 :
- if((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start != UNINIT_PTR_IN_CS) &&
- (IsNonCDLessDevice(Adapter) == FALSE))
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start);
- break;
- case DSD0 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart);
- break;
- case DSD1 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start);
- break;
- case DSD2 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start);
- break;
- case VSA0 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart);
- break;
- case VSA1 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start);
- break;
- case VSA2 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start);
- break;
- case SCSI :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware);
- break;
- case CONTROL_SECTION :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForControlSectionStart != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForControlSectionStart);
- break;
- case ISO_IMAGE1_PART2 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start);
- break;
- case ISO_IMAGE1_PART3 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start);
- break;
- case ISO_IMAGE2_PART2 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start);
- break;
- case ISO_IMAGE2_PART3 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start != UNINIT_PTR_IN_CS)
- SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start);
- break;
- default :
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section Does not exist in Flash 2.x");
- SectStartOffset = INVALID_OFFSET;
+ switch (eFlashSectionVal)
+ {
+ case ISO_IMAGE1:
+ if ((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start != UNINIT_PTR_IN_CS) &&
+ (IsNonCDLessDevice(Adapter) == FALSE))
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start);
+ break;
+ case ISO_IMAGE2:
+ if ((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start != UNINIT_PTR_IN_CS) &&
+ (IsNonCDLessDevice(Adapter) == FALSE))
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start);
+ break;
+ case DSD0:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart);
+ break;
+ case DSD1:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start);
+ break;
+ case DSD2:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start);
+ break;
+ case VSA0:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart);
+ break;
+ case VSA1:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start);
+ break;
+ case VSA2:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start);
+ break;
+ case SCSI:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware);
+ break;
+ case CONTROL_SECTION:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForControlSectionStart != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForControlSectionStart);
+ break;
+ case ISO_IMAGE1_PART2:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start);
+ break;
+ case ISO_IMAGE1_PART3:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start);
+ break;
+ case ISO_IMAGE2_PART2:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start);
+ break;
+ case ISO_IMAGE2_PART3:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start != UNINIT_PTR_IN_CS)
+ SectStartOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start);
+ break;
+ default:
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section Does not exist in Flash 2.x");
+ SectStartOffset = INVALID_OFFSET;
}
+
return SectStartOffset;
}
INT BcmGetSectionValEndOffset(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
{
- INT SectEndOffset = 0 ;
- SectEndOffset = INVALID_OFFSET;
+ INT SectEndOffset = 0;
- if(IsSectionExistInVendorInfo(Adapter,eFlash2xSectionVal))
+ SectEndOffset = INVALID_OFFSET;
+ if (IsSectionExistInVendorInfo(Adapter, eFlash2xSectionVal))
{
return Adapter->psFlash2xVendorInfo->VendorSection[eFlash2xSectionVal].OffsetFromZeroForSectionEnd;
}
- switch(eFlash2xSectionVal)
+ switch (eFlash2xSectionVal)
{
- case ISO_IMAGE1 :
- if((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End!= UNINIT_PTR_IN_CS) &&
- (IsNonCDLessDevice(Adapter) == FALSE))
- SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End);
- break;
- case ISO_IMAGE2 :
- if((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End!= UNINIT_PTR_IN_CS) &&
+ case ISO_IMAGE1:
+ if ((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End != UNINIT_PTR_IN_CS) &&
(IsNonCDLessDevice(Adapter) == FALSE))
- SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End);
- break;
- case DSD0 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDEnd != UNINIT_PTR_IN_CS)
+ SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End);
+ break;
+ case ISO_IMAGE2:
+ if ((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End != UNINIT_PTR_IN_CS) &&
+ (IsNonCDLessDevice(Adapter) == FALSE))
+ SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End);
+ break;
+ case DSD0:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDEnd != UNINIT_PTR_IN_CS)
SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDEnd);
break;
- case DSD1 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1End != UNINIT_PTR_IN_CS)
+ case DSD1:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1End != UNINIT_PTR_IN_CS)
SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1End);
break;
- case DSD2 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2End != UNINIT_PTR_IN_CS)
+ case DSD2:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2End != UNINIT_PTR_IN_CS)
SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2End);
break;
- case VSA0 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAEnd != UNINIT_PTR_IN_CS)
+ case VSA0:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAEnd != UNINIT_PTR_IN_CS)
SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAEnd);
break;
- case VSA1 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1End != UNINIT_PTR_IN_CS)
+ case VSA1:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1End != UNINIT_PTR_IN_CS)
SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1End);
break;
- case VSA2 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2End != UNINIT_PTR_IN_CS)
+ case VSA2:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2End != UNINIT_PTR_IN_CS)
SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2End);
break;
- case SCSI :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware != UNINIT_PTR_IN_CS)
+ case SCSI:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware != UNINIT_PTR_IN_CS)
SectEndOffset = ((Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware) +
- (Adapter->psFlash2xCSInfo->SizeOfScsiFirmware));
+ (Adapter->psFlash2xCSInfo->SizeOfScsiFirmware));
+ break;
+ case CONTROL_SECTION:
+ //Not Clear So Putting failure. confirm and fix it.
+ SectEndOffset = STATUS_FAILURE;
+ case ISO_IMAGE1_PART2:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End != UNINIT_PTR_IN_CS)
+ SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End);
+ break;
+ case ISO_IMAGE1_PART3:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End != UNINIT_PTR_IN_CS)
+ SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End);
+ break;
+ case ISO_IMAGE2_PART2:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End != UNINIT_PTR_IN_CS)
+ SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End);
break;
- case CONTROL_SECTION :
- //Not Clear So Putting failure. confirm and fix it.
- SectEndOffset = STATUS_FAILURE;
- case ISO_IMAGE1_PART2 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End!= UNINIT_PTR_IN_CS)
- SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End);
- break;
- case ISO_IMAGE1_PART3 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End!= UNINIT_PTR_IN_CS)
- SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End);
- break;
- case ISO_IMAGE2_PART2 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End != UNINIT_PTR_IN_CS)
- SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End);
- break;
- case ISO_IMAGE2_PART3 :
- if(Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End!= UNINIT_PTR_IN_CS)
- SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End);
- break;
-
- default :
+ case ISO_IMAGE2_PART3:
+ if (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End != UNINIT_PTR_IN_CS)
+ SectEndOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End);
+ break;
+ default:
SectEndOffset = INVALID_OFFSET;
}
+
return SectEndOffset ;
}
* return true on success and STATUS_FAILURE on fail.
*/
-INT BcmFlash2xBulkRead(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- FLASH2X_SECTION_VAL eFlash2xSectionVal,
- UINT uiOffsetWithinSectionVal,
- UINT uiNumBytes)
+INT BcmFlash2xBulkRead(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ FLASH2X_SECTION_VAL eFlash2xSectionVal,
+ UINT uiOffsetWithinSectionVal,
+ UINT uiNumBytes)
{
-
INT Status = STATUS_SUCCESS;
INT SectionStartOffset = 0;
- UINT uiAbsoluteOffset = 0 ;
- UINT uiTemp =0, value =0 ;
- if(Adapter == NULL)
+ UINT uiAbsoluteOffset = 0;
+ UINT uiTemp = 0, value = 0;
+
+ if (Adapter == NULL)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Adapter structure is NULL");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Adapter structure is NULL");
return -EINVAL;
}
- if(Adapter->device_removed )
+ if (Adapter->device_removed)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Device has been removed");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device has been removed");
return -ENODEV;
}
//NO_SECTION_VAL means absolute offset is given.
- if(eFlash2xSectionVal == NO_SECTION_VAL)
+ if (eFlash2xSectionVal == NO_SECTION_VAL)
SectionStartOffset = 0;
else
- SectionStartOffset = BcmGetSectionValStartOffset(Adapter,eFlash2xSectionVal);
+ SectionStartOffset = BcmGetSectionValStartOffset(Adapter, eFlash2xSectionVal);
- if(SectionStartOffset == STATUS_FAILURE )
+ if (SectionStartOffset == STATUS_FAILURE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"This Section<%d> does not exixt in Flash 2.x Map ",eFlash2xSectionVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "This Section<%d> does not exixt in Flash 2.x Map ", eFlash2xSectionVal);
return -EINVAL;
}
- if(IsSectionExistInVendorInfo(Adapter,eFlash2xSectionVal))
- return vendorextnReadSection(Adapter,(PUCHAR)pBuffer, eFlash2xSectionVal, uiOffsetWithinSectionVal, uiNumBytes);
+ if (IsSectionExistInVendorInfo(Adapter, eFlash2xSectionVal))
+ return vendorextnReadSection(Adapter, (PUCHAR)pBuffer, eFlash2xSectionVal, uiOffsetWithinSectionVal, uiNumBytes);
//calculating the absolute offset from FLASH;
uiAbsoluteOffset = uiOffsetWithinSectionVal + SectionStartOffset;
rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
value = 0;
- wrmalt(Adapter, 0x0f000C80,&value, sizeof(value));
-
- Status= BeceemFlashBulkRead(Adapter, pBuffer,uiAbsoluteOffset,uiNumBytes) ;
-
+ wrmalt(Adapter, 0x0f000C80, &value, sizeof(value));
+ Status = BeceemFlashBulkRead(Adapter, pBuffer, uiAbsoluteOffset, uiNumBytes);
wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
- if(Status)
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Flash Read Failed with Status :%d", Status);
- return Status ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Read Failed with Status :%d", Status);
+ return Status;
}
return Status;
*
*/
-INT BcmFlash2xBulkWrite(
- struct bcm_mini_adapter *Adapter,
- PUINT pBuffer,
- FLASH2X_SECTION_VAL eFlash2xSectVal,
- UINT uiOffset,
- UINT uiNumBytes,
- UINT bVerify)
+INT BcmFlash2xBulkWrite(struct bcm_mini_adapter *Adapter,
+ PUINT pBuffer,
+ FLASH2X_SECTION_VAL eFlash2xSectVal,
+ UINT uiOffset,
+ UINT uiNumBytes,
+ UINT bVerify)
{
-
- INT Status = STATUS_SUCCESS;
+ INT Status = STATUS_SUCCESS;
UINT FlashSectValStartOffset = 0;
UINT uiTemp = 0, value = 0;
- if(Adapter == NULL)
+
+ if (Adapter == NULL)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Adapter structure is NULL");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Adapter structure is NULL");
return -EINVAL;
}
- if(Adapter->device_removed )
+
+ if (Adapter->device_removed)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Device has been removed");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device has been removed");
return -ENODEV;
}
//NO_SECTION_VAL means absolute offset is given.
- if(eFlash2xSectVal == NO_SECTION_VAL)
+ if (eFlash2xSectVal == NO_SECTION_VAL)
FlashSectValStartOffset = 0;
else
- FlashSectValStartOffset = BcmGetSectionValStartOffset(Adapter,eFlash2xSectVal);
+ FlashSectValStartOffset = BcmGetSectionValStartOffset(Adapter, eFlash2xSectVal);
- if(FlashSectValStartOffset == STATUS_FAILURE )
+ if (FlashSectValStartOffset == STATUS_FAILURE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"This Section<%d> does not exixt in Flash Map 2.x",eFlash2xSectVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "This Section<%d> does not exixt in Flash Map 2.x", eFlash2xSectVal);
return -EINVAL;
}
- if(IsSectionExistInVendorInfo(Adapter,eFlash2xSectVal))
+ if (IsSectionExistInVendorInfo(Adapter, eFlash2xSectVal))
return vendorextnWriteSection(Adapter, (PUCHAR)pBuffer, eFlash2xSectVal, uiOffset, uiNumBytes, bVerify);
//calculating the absolute offset from FLASH;
rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
value = 0;
- wrmalt(Adapter, 0x0f000C80,&value, sizeof(value));
+ wrmalt(Adapter, 0x0f000C80, &value, sizeof(value));
- Status = BeceemFlashBulkWrite(Adapter, pBuffer,uiOffset,uiNumBytes,bVerify);
+ Status = BeceemFlashBulkWrite(Adapter, pBuffer, uiOffset, uiNumBytes, bVerify);
wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
- if(Status)
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Flash Write failed with Status :%d", Status);
- return Status ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Write failed with Status :%d", Status);
+ return Status;
}
return Status;
-
}
/**
* Return STATUS_SUCESS if get success in setting the right DSD else negaive error code
*
**/
+
static INT BcmGetActiveDSD(struct bcm_mini_adapter *Adapter)
{
- FLASH2X_SECTION_VAL uiHighestPriDSD = 0 ;
+ FLASH2X_SECTION_VAL uiHighestPriDSD = 0;
uiHighestPriDSD = getHighestPriDSD(Adapter);
Adapter->eActiveDSD = uiHighestPriDSD;
- if(DSD0 == uiHighestPriDSD)
+ if (DSD0 == uiHighestPriDSD)
Adapter->ulFlashCalStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart;
- if(DSD1 == uiHighestPriDSD)
+ if (DSD1 == uiHighestPriDSD)
Adapter->ulFlashCalStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start;
- if(DSD2 == uiHighestPriDSD)
+ if (DSD2 == uiHighestPriDSD)
Adapter->ulFlashCalStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start;
- if(Adapter->eActiveDSD)
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Active DSD :%d", Adapter->eActiveDSD);
- if(Adapter->eActiveDSD == 0)
+ if (Adapter->eActiveDSD)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Active DSD :%d", Adapter->eActiveDSD);
+ if (Adapter->eActiveDSD == 0)
{
//if No DSD gets Active, Make Active the DSD with WR permission
- if(IsSectionWritable(Adapter,DSD2))
+ if (IsSectionWritable(Adapter, DSD2))
{
Adapter->eActiveDSD = DSD2;
Adapter->ulFlashCalStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start;
}
- else if(IsSectionWritable(Adapter,DSD1))
+ else if (IsSectionWritable(Adapter, DSD1))
{
Adapter->eActiveDSD = DSD1;
Adapter->ulFlashCalStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start;
}
- else if(IsSectionWritable(Adapter,DSD0))
+ else if (IsSectionWritable(Adapter, DSD0))
{
Adapter->eActiveDSD = DSD0;
Adapter->ulFlashCalStart = Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart;
return STATUS_SUCCESS;
}
-
/**
* BcmGetActiveISO :- Set the Active ISO in Adapter Data Structue
* @Adapter : Driver private Data Structure
static INT BcmGetActiveISO(struct bcm_mini_adapter *Adapter)
{
+ INT HighestPriISO = 0;
- INT HighestPriISO = 0 ;
HighestPriISO = getHighestPriISO(Adapter);
- Adapter->eActiveISO = HighestPriISO ;
- if(Adapter->eActiveISO == ISO_IMAGE2)
+ Adapter->eActiveISO = HighestPriISO;
+ if (Adapter->eActiveISO == ISO_IMAGE2)
Adapter->uiActiveISOOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start);
- else if(Adapter->eActiveISO == ISO_IMAGE1)
+ else if (Adapter->eActiveISO == ISO_IMAGE1)
Adapter->uiActiveISOOffset = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start);
- if(Adapter->eActiveISO)
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Active ISO :%x", Adapter->eActiveISO);
+ if (Adapter->eActiveISO)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Active ISO :%x", Adapter->eActiveISO);
return STATUS_SUCCESS;
}
* Failure:-FALSE, offset is RO
*
**/
+
B_UINT8 IsOffsetWritable(struct bcm_mini_adapter *Adapter, UINT uiOffset)
{
UINT uiSectorNum = 0;
- UINT uiWordOfSectorPermission =0;
+ UINT uiWordOfSectorPermission = 0;
UINT uiBitofSectorePermission = 0;
B_UINT32 permissionBits = 0;
+
uiSectorNum = uiOffset/Adapter->uiSectorSize;
- //calculating the word having this Sector Access permission from SectorAccessBitMap Array
- uiWordOfSectorPermission = Adapter->psFlash2xCSInfo->SectorAccessBitMap[uiSectorNum /16];
+ // calculating the word having this Sector Access permission from SectorAccessBitMap Array
+ uiWordOfSectorPermission = Adapter->psFlash2xCSInfo->SectorAccessBitMap[uiSectorNum / 16];
- //calculating the bit index inside the word for this sector
- uiBitofSectorePermission = 2*(15 - uiSectorNum %16);
+ // calculating the bit index inside the word for this sector
+ uiBitofSectorePermission = 2 * (15 - uiSectorNum % 16);
- //Setting Access permission
- permissionBits = uiWordOfSectorPermission & (0x3 << uiBitofSectorePermission) ;
+ // Setting Access permission
+ permissionBits = uiWordOfSectorPermission & (0x3 << uiBitofSectorePermission);
permissionBits = (permissionBits >> uiBitofSectorePermission) & 0x3;
- if(permissionBits == SECTOR_READWRITE_PERMISSION)
- return TRUE;
+ if (permissionBits == SECTOR_READWRITE_PERMISSION)
+ return TRUE;
else
return FALSE;
}
static INT BcmDumpFlash2xSectionBitMap(PFLASH2X_BITMAP psFlash2xBitMap)
{
struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "***************Flash 2.x Section Bitmap***************");
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"ISO_IMAGE1 :0X%x", psFlash2xBitMap->ISO_IMAGE1);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"ISO_IMAGE2 :0X%x", psFlash2xBitMap->ISO_IMAGE2);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"DSD0 :0X%x", psFlash2xBitMap->DSD0);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"DSD1 :0X%x", psFlash2xBitMap->DSD1);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"DSD2 :0X%x", psFlash2xBitMap->DSD2);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"VSA0 :0X%x", psFlash2xBitMap->VSA0);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"VSA1 :0X%x", psFlash2xBitMap->VSA1);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"VSA2 :0X%x", psFlash2xBitMap->VSA2);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"SCSI :0X%x", psFlash2xBitMap->SCSI);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"CONTROL_SECTION :0X%x", psFlash2xBitMap->CONTROL_SECTION);
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "***************Flash 2.x Section Bitmap***************");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "ISO_IMAGE1 :0X%x", psFlash2xBitMap->ISO_IMAGE1);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "ISO_IMAGE2 :0X%x", psFlash2xBitMap->ISO_IMAGE2);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "DSD0 :0X%x", psFlash2xBitMap->DSD0);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "DSD1 :0X%x", psFlash2xBitMap->DSD1);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "DSD2 :0X%x", psFlash2xBitMap->DSD2);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "VSA0 :0X%x", psFlash2xBitMap->VSA0);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "VSA1 :0X%x", psFlash2xBitMap->VSA1);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "VSA2 :0X%x", psFlash2xBitMap->VSA2);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SCSI :0X%x", psFlash2xBitMap->SCSI);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "CONTROL_SECTION :0X%x", psFlash2xBitMap->CONTROL_SECTION);
return STATUS_SUCCESS;
}
INT BcmGetFlash2xSectionalBitMap(struct bcm_mini_adapter *Adapter, PFLASH2X_BITMAP psFlash2xBitMap)
{
-
-
PFLASH2X_CS_INFO psFlash2xCSInfo = Adapter->psFlash2xCSInfo;
- FLASH2X_SECTION_VAL uiHighestPriDSD = 0 ;
- FLASH2X_SECTION_VAL uiHighestPriISO= 0 ;
- BOOLEAN SetActiveDSDDone = FALSE ;
- BOOLEAN SetActiveISODone = FALSE ;
+ FLASH2X_SECTION_VAL uiHighestPriDSD = 0;
+ FLASH2X_SECTION_VAL uiHighestPriISO = 0;
+ BOOLEAN SetActiveDSDDone = FALSE;
+ BOOLEAN SetActiveISODone = FALSE;
- //For 1.x map all the section except DSD0 will be shown as not present
- //This part will be used by calibration tool to detect the number of DSD present in Flash.
- if(IsFlash2x(Adapter) == FALSE)
+ // For 1.x map all the section except DSD0 will be shown as not present
+ // This part will be used by calibration tool to detect the number of DSD present in Flash.
+ if (IsFlash2x(Adapter) == FALSE)
{
psFlash2xBitMap->ISO_IMAGE2 = 0;
psFlash2xBitMap->ISO_IMAGE1 = 0;
psFlash2xBitMap->DSD0 = FLASH2X_SECTION_VALID | FLASH2X_SECTION_ACT | FLASH2X_SECTION_PRESENT; //0xF; //0000(Reseved)1(Active)0(RW)1(valid)1(present)
- psFlash2xBitMap->DSD1 = 0 ;
- psFlash2xBitMap->DSD2 = 0 ;
- psFlash2xBitMap->VSA0 = 0 ;
- psFlash2xBitMap->VSA1 = 0 ;
- psFlash2xBitMap->VSA2 = 0 ;
- psFlash2xBitMap->CONTROL_SECTION = 0 ;
- psFlash2xBitMap->SCSI= 0 ;
- psFlash2xBitMap->Reserved0 = 0 ;
- psFlash2xBitMap->Reserved1 = 0 ;
- psFlash2xBitMap->Reserved2 = 0 ;
- return STATUS_SUCCESS ;
+ psFlash2xBitMap->DSD1 = 0;
+ psFlash2xBitMap->DSD2 = 0;
+ psFlash2xBitMap->VSA0 = 0;
+ psFlash2xBitMap->VSA1 = 0;
+ psFlash2xBitMap->VSA2 = 0;
+ psFlash2xBitMap->CONTROL_SECTION = 0;
+ psFlash2xBitMap->SCSI = 0;
+ psFlash2xBitMap->Reserved0 = 0;
+ psFlash2xBitMap->Reserved1 = 0;
+ psFlash2xBitMap->Reserved2 = 0;
+ return STATUS_SUCCESS;
}
uiHighestPriDSD = getHighestPriDSD(Adapter);
///
// IS0 IMAGE 2
///
- if((psFlash2xCSInfo->OffsetISOImage2Part1Start) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetISOImage2Part1Start) != UNINIT_PTR_IN_CS)
{
//Setting the 0th Bit representing the Section is present or not.
- psFlash2xBitMap->ISO_IMAGE2= psFlash2xBitMap->ISO_IMAGE2 | FLASH2X_SECTION_PRESENT;
+ psFlash2xBitMap->ISO_IMAGE2 = psFlash2xBitMap->ISO_IMAGE2 | FLASH2X_SECTION_PRESENT;
-
- if(ReadISOSignature(Adapter,ISO_IMAGE2)== ISO_IMAGE_MAGIC_NUMBER)
+ if (ReadISOSignature(Adapter, ISO_IMAGE2) == ISO_IMAGE_MAGIC_NUMBER)
psFlash2xBitMap->ISO_IMAGE2 |= FLASH2X_SECTION_VALID;
-
- //Calculation for extrating the Access permission
- if(IsSectionWritable(Adapter, ISO_IMAGE2) == FALSE)
+ // Calculation for extrating the Access permission
+ if (IsSectionWritable(Adapter, ISO_IMAGE2) == FALSE)
psFlash2xBitMap->ISO_IMAGE2 |= FLASH2X_SECTION_RO;
- if(SetActiveISODone == FALSE && uiHighestPriISO == ISO_IMAGE2)
+ if (SetActiveISODone == FALSE && uiHighestPriISO == ISO_IMAGE2)
{
- psFlash2xBitMap->ISO_IMAGE2 |= FLASH2X_SECTION_ACT ;
+ psFlash2xBitMap->ISO_IMAGE2 |= FLASH2X_SECTION_ACT;
SetActiveISODone = TRUE;
}
-
}
///
// IS0 IMAGE 1
///
- if((psFlash2xCSInfo->OffsetISOImage1Part1Start) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetISOImage1Part1Start) != UNINIT_PTR_IN_CS)
{
- //Setting the 0th Bit representing the Section is present or not.
+ // Setting the 0th Bit representing the Section is present or not.
psFlash2xBitMap->ISO_IMAGE1 = psFlash2xBitMap->ISO_IMAGE1 | FLASH2X_SECTION_PRESENT;
- if(ReadISOSignature(Adapter,ISO_IMAGE1) == ISO_IMAGE_MAGIC_NUMBER)
+ if (ReadISOSignature(Adapter, ISO_IMAGE1) == ISO_IMAGE_MAGIC_NUMBER)
psFlash2xBitMap->ISO_IMAGE1 |= FLASH2X_SECTION_VALID;
- // Calculation for extrating the Access permission
- if(IsSectionWritable(Adapter, ISO_IMAGE1) == FALSE)
+ // Calculation for extrating the Access permission
+ if (IsSectionWritable(Adapter, ISO_IMAGE1) == FALSE)
psFlash2xBitMap->ISO_IMAGE1 |= FLASH2X_SECTION_RO;
- if(SetActiveISODone == FALSE && uiHighestPriISO == ISO_IMAGE1)
+ if (SetActiveISODone == FALSE && uiHighestPriISO == ISO_IMAGE1)
{
- psFlash2xBitMap->ISO_IMAGE1 |= FLASH2X_SECTION_ACT ;
+ psFlash2xBitMap->ISO_IMAGE1 |= FLASH2X_SECTION_ACT;
SetActiveISODone = TRUE;
}
}
-
-
///
// DSD2
///
- if((psFlash2xCSInfo->OffsetFromZeroForDSD2Start) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForDSD2Start) != UNINIT_PTR_IN_CS)
{
//Setting the 0th Bit representing the Section is present or not.
- psFlash2xBitMap->DSD2= psFlash2xBitMap->DSD2 | FLASH2X_SECTION_PRESENT;
+ psFlash2xBitMap->DSD2 = psFlash2xBitMap->DSD2 | FLASH2X_SECTION_PRESENT;
- if(ReadDSDSignature(Adapter,DSD2)== DSD_IMAGE_MAGIC_NUMBER)
+ if (ReadDSDSignature(Adapter, DSD2) == DSD_IMAGE_MAGIC_NUMBER)
psFlash2xBitMap->DSD2 |= FLASH2X_SECTION_VALID;
- //Calculation for extrating the Access permission
- if(IsSectionWritable(Adapter, DSD2) == FALSE)
+ // Calculation for extrating the Access permission
+ if (IsSectionWritable(Adapter, DSD2) == FALSE)
{
psFlash2xBitMap->DSD2 |= FLASH2X_SECTION_RO;
-
}
else
{
//Means section is writable
- if((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD2))
+ if ((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD2))
{
- psFlash2xBitMap->DSD2 |= FLASH2X_SECTION_ACT ;
- SetActiveDSDDone =TRUE ;
+ psFlash2xBitMap->DSD2 |= FLASH2X_SECTION_ACT;
+ SetActiveDSDDone = TRUE;
}
}
}
///
// DSD 1
///
- if((psFlash2xCSInfo->OffsetFromZeroForDSD1Start) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForDSD1Start) != UNINIT_PTR_IN_CS)
{
- //Setting the 0th Bit representing the Section is present or not.
- psFlash2xBitMap->DSD1= psFlash2xBitMap->DSD1 | FLASH2X_SECTION_PRESENT;
-
+ // Setting the 0th Bit representing the Section is present or not.
+ psFlash2xBitMap->DSD1 = psFlash2xBitMap->DSD1 | FLASH2X_SECTION_PRESENT;
- if(ReadDSDSignature(Adapter,DSD1)== DSD_IMAGE_MAGIC_NUMBER)
+ if (ReadDSDSignature(Adapter, DSD1) == DSD_IMAGE_MAGIC_NUMBER)
psFlash2xBitMap->DSD1 |= FLASH2X_SECTION_VALID;
- //Calculation for extrating the Access permission
- if(IsSectionWritable(Adapter, DSD1) == FALSE)
+ // Calculation for extrating the Access permission
+ if (IsSectionWritable(Adapter, DSD1) == FALSE)
{
psFlash2xBitMap->DSD1 |= FLASH2X_SECTION_RO;
}
else
{
- //Means section is writable
- if((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD1))
+ // Means section is writable
+ if ((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD1))
{
- psFlash2xBitMap->DSD1 |= FLASH2X_SECTION_ACT ;
- SetActiveDSDDone =TRUE ;
+ psFlash2xBitMap->DSD1 |= FLASH2X_SECTION_ACT;
+ SetActiveDSDDone = TRUE;
}
}
-
}
///
//For DSD 0
//
- if((psFlash2xCSInfo->OffsetFromZeroForDSDStart) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForDSDStart) != UNINIT_PTR_IN_CS)
{
//Setting the 0th Bit representing the Section is present or not.
psFlash2xBitMap->DSD0 = psFlash2xBitMap->DSD0 | FLASH2X_SECTION_PRESENT;
- if(ReadDSDSignature(Adapter,DSD0) == DSD_IMAGE_MAGIC_NUMBER)
+ if (ReadDSDSignature(Adapter, DSD0) == DSD_IMAGE_MAGIC_NUMBER)
psFlash2xBitMap->DSD0 |= FLASH2X_SECTION_VALID;
- //Setting Access permission
- if(IsSectionWritable(Adapter, DSD0) == FALSE)
+ // Setting Access permission
+ if (IsSectionWritable(Adapter, DSD0) == FALSE)
{
psFlash2xBitMap->DSD0 |= FLASH2X_SECTION_RO;
}
else
{
- //Means section is writable
- if((SetActiveDSDDone == FALSE) &&(uiHighestPriDSD == DSD0))
+ // Means section is writable
+ if ((SetActiveDSDDone == FALSE) && (uiHighestPriDSD == DSD0))
{
- psFlash2xBitMap->DSD0 |= FLASH2X_SECTION_ACT ;
- SetActiveDSDDone =TRUE ;
+ psFlash2xBitMap->DSD0 |= FLASH2X_SECTION_ACT;
+ SetActiveDSDDone = TRUE;
}
}
}
///
- // VSA 0
+ // VSA 0
///
- if((psFlash2xCSInfo->OffsetFromZeroForVSAStart) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForVSAStart) != UNINIT_PTR_IN_CS)
{
- //Setting the 0th Bit representing the Section is present or not.
- psFlash2xBitMap->VSA0= psFlash2xBitMap->VSA0 | FLASH2X_SECTION_PRESENT;
+ // Setting the 0th Bit representing the Section is present or not.
+ psFlash2xBitMap->VSA0 = psFlash2xBitMap->VSA0 | FLASH2X_SECTION_PRESENT;
- //Setting the Access Bit. Map is not defined hece setting it always valid
+ // Setting the Access Bit. Map is not defined hece setting it always valid
psFlash2xBitMap->VSA0 |= FLASH2X_SECTION_VALID;
- //Calculation for extrating the Access permission
- if(IsSectionWritable(Adapter, VSA0) == FALSE)
+ // Calculation for extrating the Access permission
+ if (IsSectionWritable(Adapter, VSA0) == FALSE)
psFlash2xBitMap->VSA0 |= FLASH2X_SECTION_RO;
- //By Default section is Active
- psFlash2xBitMap->VSA0 |= FLASH2X_SECTION_ACT ;
-
+ // By Default section is Active
+ psFlash2xBitMap->VSA0 |= FLASH2X_SECTION_ACT;
}
-
///
- // VSA 1
+ // VSA 1
///
-
- if((psFlash2xCSInfo->OffsetFromZeroForVSA1Start) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForVSA1Start) != UNINIT_PTR_IN_CS)
{
- //Setting the 0th Bit representing the Section is present or not.
- psFlash2xBitMap->VSA1= psFlash2xBitMap->VSA1 | FLASH2X_SECTION_PRESENT;
+ // Setting the 0th Bit representing the Section is present or not.
+ psFlash2xBitMap->VSA1 = psFlash2xBitMap->VSA1 | FLASH2X_SECTION_PRESENT;
- //Setting the Access Bit. Map is not defined hece setting it always valid
- psFlash2xBitMap->VSA1|= FLASH2X_SECTION_VALID;
+ // Setting the Access Bit. Map is not defined hece setting it always valid
+ psFlash2xBitMap->VSA1 |= FLASH2X_SECTION_VALID;
- //Checking For Access permission
- if(IsSectionWritable(Adapter, VSA1) == FALSE)
+ // Checking For Access permission
+ if (IsSectionWritable(Adapter, VSA1) == FALSE)
psFlash2xBitMap->VSA1 |= FLASH2X_SECTION_RO;
- //By Default section is Active
- psFlash2xBitMap->VSA1 |= FLASH2X_SECTION_ACT ;
-
+ // By Default section is Active
+ psFlash2xBitMap->VSA1 |= FLASH2X_SECTION_ACT;
}
-
///
- // VSA 2
+ // VSA 2
///
-
- if((psFlash2xCSInfo->OffsetFromZeroForVSA2Start) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForVSA2Start) != UNINIT_PTR_IN_CS)
{
- //Setting the 0th Bit representing the Section is present or not.
- psFlash2xBitMap->VSA2= psFlash2xBitMap->VSA2 | FLASH2X_SECTION_PRESENT;
-
+ // Setting the 0th Bit representing the Section is present or not.
+ psFlash2xBitMap->VSA2 = psFlash2xBitMap->VSA2 | FLASH2X_SECTION_PRESENT;
- //Setting the Access Bit. Map is not defined hece setting it always valid
+ // Setting the Access Bit. Map is not defined hece setting it always valid
psFlash2xBitMap->VSA2 |= FLASH2X_SECTION_VALID;
- //Checking For Access permission
- if(IsSectionWritable(Adapter, VSA2) == FALSE)
+ // Checking For Access permission
+ if (IsSectionWritable(Adapter, VSA2) == FALSE)
psFlash2xBitMap->VSA2 |= FLASH2X_SECTION_RO;
- //By Default section is Active
- psFlash2xBitMap->VSA2 |= FLASH2X_SECTION_ACT ;
+ // By Default section is Active
+ psFlash2xBitMap->VSA2 |= FLASH2X_SECTION_ACT;
}
///
// SCSI Section
///
- if((psFlash2xCSInfo->OffsetFromZeroForScsiFirmware) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForScsiFirmware) != UNINIT_PTR_IN_CS)
{
- //Setting the 0th Bit representing the Section is present or not.
- psFlash2xBitMap->SCSI= psFlash2xBitMap->SCSI | FLASH2X_SECTION_PRESENT;
-
+ // Setting the 0th Bit representing the Section is present or not.
+ psFlash2xBitMap->SCSI = psFlash2xBitMap->SCSI | FLASH2X_SECTION_PRESENT;
- //Setting the Access Bit. Map is not defined hece setting it always valid
- psFlash2xBitMap->SCSI|= FLASH2X_SECTION_VALID;
+ // Setting the Access Bit. Map is not defined hece setting it always valid
+ psFlash2xBitMap->SCSI |= FLASH2X_SECTION_VALID;
- //Checking For Access permission
- if(IsSectionWritable(Adapter, SCSI) == FALSE)
+ // Checking For Access permission
+ if (IsSectionWritable(Adapter, SCSI) == FALSE)
psFlash2xBitMap->SCSI |= FLASH2X_SECTION_RO;
- //By Default section is Active
- psFlash2xBitMap->SCSI |= FLASH2X_SECTION_ACT ;
-
+ // By Default section is Active
+ psFlash2xBitMap->SCSI |= FLASH2X_SECTION_ACT;
}
-
///
- // Control Section
+ // Control Section
///
- if((psFlash2xCSInfo->OffsetFromZeroForControlSectionStart) != UNINIT_PTR_IN_CS)
+ if ((psFlash2xCSInfo->OffsetFromZeroForControlSectionStart) != UNINIT_PTR_IN_CS)
{
- //Setting the 0th Bit representing the Section is present or not.
+ // Setting the 0th Bit representing the Section is present or not.
psFlash2xBitMap->CONTROL_SECTION = psFlash2xBitMap->CONTROL_SECTION | (FLASH2X_SECTION_PRESENT);
-
- //Setting the Access Bit. Map is not defined hece setting it always valid
+ // Setting the Access Bit. Map is not defined hece setting it always valid
psFlash2xBitMap->CONTROL_SECTION |= FLASH2X_SECTION_VALID;
- //Checking For Access permission
- if(IsSectionWritable(Adapter, CONTROL_SECTION) == FALSE)
+ // Checking For Access permission
+ if (IsSectionWritable(Adapter, CONTROL_SECTION) == FALSE)
psFlash2xBitMap->CONTROL_SECTION |= FLASH2X_SECTION_RO;
- //By Default section is Active
- psFlash2xBitMap->CONTROL_SECTION |= FLASH2X_SECTION_ACT ;
-
+ // By Default section is Active
+ psFlash2xBitMap->CONTROL_SECTION |= FLASH2X_SECTION_ACT;
}
///
- // For Reserved Sections
+ // For Reserved Sections
///
psFlash2xBitMap->Reserved0 = 0;
psFlash2xBitMap->Reserved0 = 0;
psFlash2xBitMap->Reserved0 = 0;
-
BcmDumpFlash2xSectionBitMap(psFlash2xBitMap);
- return STATUS_SUCCESS ;
-
+ return STATUS_SUCCESS;
}
+
/**
BcmSetActiveSection :- Set Active section is used to make priority field highest over other
section of same type.
Return Value:- Make the priorit highest else return erorr code
**/
+
INT BcmSetActiveSection(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectVal)
{
unsigned int SectImagePriority = 0;
- INT Status =STATUS_SUCCESS;
+ INT Status = STATUS_SUCCESS;
//DSD_HEADER sDSD = {0};
//ISO_HEADER sISO = {0};
INT HighestPriDSD = 0 ;
INT HighestPriISO = 0;
-
-
- Status = IsSectionWritable(Adapter,eFlash2xSectVal) ;
- if(Status != TRUE )
+ Status = IsSectionWritable(Adapter, eFlash2xSectVal);
+ if (Status != TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Provided Section <%d> is not writable",eFlash2xSectVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Provided Section <%d> is not writable", eFlash2xSectVal);
return STATUS_FAILURE;
}
- Adapter->bHeaderChangeAllowed = TRUE ;
- switch(eFlash2xSectVal)
+ Adapter->bHeaderChangeAllowed = TRUE;
+ switch (eFlash2xSectVal)
{
- case ISO_IMAGE1 :
- case ISO_IMAGE2 :
- if(ReadISOSignature(Adapter,eFlash2xSectVal)== ISO_IMAGE_MAGIC_NUMBER )
+ case ISO_IMAGE1:
+ case ISO_IMAGE2:
+ if (ReadISOSignature(Adapter, eFlash2xSectVal) == ISO_IMAGE_MAGIC_NUMBER)
{
HighestPriISO = getHighestPriISO(Adapter);
- if(HighestPriISO == eFlash2xSectVal )
+ if (HighestPriISO == eFlash2xSectVal)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Given ISO<%x> already has highest priority",eFlash2xSectVal );
- Status = STATUS_SUCCESS ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Given ISO<%x> already has highest priority", eFlash2xSectVal);
+ Status = STATUS_SUCCESS;
break;
}
SectImagePriority = ReadISOPriority(Adapter, HighestPriISO) + 1;
- if((SectImagePriority <= 0) && IsSectionWritable(Adapter,HighestPriISO))
+ if ((SectImagePriority <= 0) && IsSectionWritable(Adapter, HighestPriISO))
{
// This is a SPECIAL Case which will only happen if the current highest priority ISO has priority value = 0x7FFFFFFF.
// We will write 1 to the current Highest priority ISO And then shall increase the priority of the requested ISO
// by user
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n", eFlash2xSectVal);
SectImagePriority = htonl(0x1);
Status = BcmFlash2xBulkWrite(Adapter,
&SectImagePriority,
0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImagePriority),
SIGNATURE_SIZE,
TRUE);
-
- if(Status)
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Priority has not been written properly");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Priority has not been written properly");
Status = STATUS_FAILURE;
- break ;
+ break;
}
HighestPriISO = getHighestPriISO(Adapter);
- if(HighestPriISO == eFlash2xSectVal )
+ if (HighestPriISO == eFlash2xSectVal)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Given ISO<%x> already has highest priority",eFlash2xSectVal );
- Status = STATUS_SUCCESS ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Given ISO<%x> already has highest priority", eFlash2xSectVal);
+ Status = STATUS_SUCCESS;
break;
}
SectImagePriority = 2;
- }
-
+ }
SectImagePriority = htonl(SectImagePriority);
Status = BcmFlash2xBulkWrite(Adapter,
- &SectImagePriority,
- eFlash2xSectVal,
- 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImagePriority),
- SIGNATURE_SIZE,
- TRUE);
- if(Status)
+ &SectImagePriority,
+ eFlash2xSectVal,
+ 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImagePriority),
+ SIGNATURE_SIZE,
+ TRUE);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Priority has not been written properly");
- break ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Priority has not been written properly");
+ break;
}
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Signature is currupted. Hence can't increase the priority");
- Status = STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Signature is currupted. Hence can't increase the priority");
+ Status = STATUS_FAILURE;
break;
}
break;
- case DSD0 :
- case DSD1 :
- case DSD2 :
- if(ReadDSDSignature(Adapter,eFlash2xSectVal)== DSD_IMAGE_MAGIC_NUMBER)
+ case DSD0:
+ case DSD1:
+ case DSD2:
+ if (ReadDSDSignature(Adapter, eFlash2xSectVal) == DSD_IMAGE_MAGIC_NUMBER)
{
HighestPriDSD = getHighestPriDSD(Adapter);
-
- if((HighestPriDSD == eFlash2xSectVal))
+ if ((HighestPriDSD == eFlash2xSectVal))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Given DSD<%x> already has highest priority", eFlash2xSectVal);
- Status = STATUS_SUCCESS ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Given DSD<%x> already has highest priority", eFlash2xSectVal);
+ Status = STATUS_SUCCESS;
break;
}
- SectImagePriority = ReadDSDPriority(Adapter, HighestPriDSD) + 1 ;
- if(SectImagePriority <= 0)
+ SectImagePriority = ReadDSDPriority(Adapter, HighestPriDSD) + 1;
+ if (SectImagePriority <= 0)
{
// This is a SPECIAL Case which will only happen if the current highest priority DSD has priority value = 0x7FFFFFFF.
// We will write 1 to the current Highest priority DSD And then shall increase the priority of the requested DSD
// by user
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n", eFlash2xSectVal);
SectImagePriority = htonl(0x1);
Status = BcmFlash2xBulkWrite(Adapter,
- &SectImagePriority,
- HighestPriDSD,
- Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
- SIGNATURE_SIZE,
- TRUE);
-
- if(Status)
+ &SectImagePriority,
+ HighestPriDSD,
+ Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
+ SIGNATURE_SIZE,
+ TRUE);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Priority has not been written properly");
- break ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Priority has not been written properly");
+ break;
}
HighestPriDSD = getHighestPriDSD(Adapter);
- if((HighestPriDSD == eFlash2xSectVal))
+ if ((HighestPriDSD == eFlash2xSectVal))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Made the DSD: %x highest by reducing priority of other\n", eFlash2xSectVal);
- Status = STATUS_SUCCESS ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Made the DSD: %x highest by reducing priority of other\n", eFlash2xSectVal);
+ Status = STATUS_SUCCESS;
break;
}
SectImagePriority = htonl(0x2);
Status = BcmFlash2xBulkWrite(Adapter,
- &SectImagePriority,
- HighestPriDSD,
- Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
- SIGNATURE_SIZE,
- TRUE);
-
- if(Status)
+ &SectImagePriority,
+ HighestPriDSD,
+ Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
+ SIGNATURE_SIZE,
+ TRUE);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Priority has not been written properly");
- break ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Priority has not been written properly");
+ break;
}
HighestPriDSD = getHighestPriDSD(Adapter);
-
- if((HighestPriDSD == eFlash2xSectVal))
+ if ((HighestPriDSD == eFlash2xSectVal))
{
- Status = STATUS_SUCCESS ;
+ Status = STATUS_SUCCESS;
break;
}
- SectImagePriority = 3 ;
+ SectImagePriority = 3;
}
SectImagePriority = htonl(SectImagePriority);
Status = BcmFlash2xBulkWrite(Adapter,
- &SectImagePriority,
- eFlash2xSectVal,
- Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
- SIGNATURE_SIZE ,
- TRUE);
- if(Status)
+ &SectImagePriority,
+ eFlash2xSectVal,
+ Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
+ SIGNATURE_SIZE,
+ TRUE);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Priority has not been written properly");
- Status = STATUS_FAILURE ;
- break ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Priority has not been written properly");
+ Status = STATUS_FAILURE;
+ break;
}
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Signature is currupted. Hence can't increase the priority");
- Status = STATUS_FAILURE ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Signature is currupted. Hence can't increase the priority");
+ Status = STATUS_FAILURE;
break;
}
break;
- case VSA0 :
- case VSA1 :
- case VSA2 :
- //Has to be decided
- break ;
- default :
- Status = STATUS_FAILURE ;
- break;
-
+ case VSA0:
+ case VSA1:
+ case VSA2:
+ // Has to be decided
+ break;
+ default:
+ Status = STATUS_FAILURE;
+ break;
}
- Adapter->bHeaderChangeAllowed = FALSE ;
+ Adapter->bHeaderChangeAllowed = FALSE;
return Status;
-
}
/**
Return value:- SUCCESS if copies successfully else negative error code
**/
+
INT BcmCopyISO(struct bcm_mini_adapter *Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
{
-
PCHAR Buff = NULL;
- FLASH2X_SECTION_VAL eISOReadPart = 0,eISOWritePart = 0;
+ FLASH2X_SECTION_VAL eISOReadPart = 0, eISOWritePart = 0;
UINT uiReadOffsetWithinPart = 0, uiWriteOffsetWithinPart = 0;
UINT uiTotalDataToCopy = 0;
- BOOLEAN IsThisHeaderSector = FALSE ;
+ BOOLEAN IsThisHeaderSector = FALSE;
UINT sigOffset = 0;
UINT ISOLength = 0;
UINT Status = STATUS_SUCCESS;
UINT SigBuff[MAX_RW_SIZE];
UINT i = 0;
- if(ReadISOSignature(Adapter,sCopySectStrut.SrcSection) != ISO_IMAGE_MAGIC_NUMBER)
+ if (ReadISOSignature(Adapter, sCopySectStrut.SrcSection) != ISO_IMAGE_MAGIC_NUMBER)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "error as Source ISO Section does not have valid signature");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "error as Source ISO Section does not have valid signature");
return STATUS_FAILURE;
}
Status = BcmFlash2xBulkRead(Adapter,
- &ISOLength,
- sCopySectStrut.SrcSection,
- 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER,ISOImageSize),
- 4);
-
- if(Status)
+ &ISOLength,
+ sCopySectStrut.SrcSection,
+ 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImageSize),
+ 4);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Read failed while copying ISO\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read failed while copying ISO\n");
return Status;
}
ISOLength = htonl(ISOLength);
-
- if(ISOLength % Adapter->uiSectorSize)
+ if (ISOLength % Adapter->uiSectorSize)
{
- ISOLength = Adapter->uiSectorSize*(1 + ISOLength/Adapter->uiSectorSize);
+ ISOLength = Adapter->uiSectorSize * (1 + ISOLength/Adapter->uiSectorSize);
}
sigOffset = FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImageMagicNumber);
Buff = kzalloc(Adapter->uiSectorSize, GFP_KERNEL);
- if(Buff == NULL)
+ if (Buff == NULL)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Memory allocation failed for section size");
- return -ENOMEM;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed for section size");
+ return -ENOMEM;
}
- if(sCopySectStrut.SrcSection ==ISO_IMAGE1 && sCopySectStrut.DstSection ==ISO_IMAGE2)
+ if (sCopySectStrut.SrcSection == ISO_IMAGE1 && sCopySectStrut.DstSection == ISO_IMAGE2)
{
- eISOReadPart = ISO_IMAGE1 ;
- eISOWritePart = ISO_IMAGE2 ;
+ eISOReadPart = ISO_IMAGE1;
+ eISOWritePart = ISO_IMAGE2;
uiReadOffsetWithinPart = 0;
- uiWriteOffsetWithinPart = 0 ;
+ uiWriteOffsetWithinPart = 0;
- uiTotalDataToCopy =(Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start);
+ uiTotalDataToCopy = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start);
- if(uiTotalDataToCopy < ISOLength)
+ if (uiTotalDataToCopy < ISOLength)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"error as Source ISO Section does not have valid signature");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "error as Source ISO Section does not have valid signature");
Status = STATUS_FAILURE;
goto out;
}
- uiTotalDataToCopy =(Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start);
+ uiTotalDataToCopy = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start);
- if(uiTotalDataToCopy < ISOLength)
+ if (uiTotalDataToCopy < ISOLength)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"error as Dest ISO Section does not have enough section size");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "error as Dest ISO Section does not have enough section size");
Status = STATUS_FAILURE;
goto out;
}
uiTotalDataToCopy = ISOLength;
- CorruptISOSig(Adapter,ISO_IMAGE2);
-
- while(uiTotalDataToCopy)
+ CorruptISOSig(Adapter, ISO_IMAGE2);
+ while (uiTotalDataToCopy)
{
- if(uiTotalDataToCopy == Adapter->uiSectorSize)
+ if (uiTotalDataToCopy == Adapter->uiSectorSize)
{
- //Setting for write of first sector. First sector is assumed to be written in last
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Writing the signature sector");
- eISOReadPart = ISO_IMAGE1 ;
+ // Setting for write of first sector. First sector is assumed to be written in last
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Writing the signature sector");
+ eISOReadPart = ISO_IMAGE1;
uiReadOffsetWithinPart = 0;
eISOWritePart = ISO_IMAGE2;
- uiWriteOffsetWithinPart = 0 ;
- IsThisHeaderSector = TRUE ;
-
+ uiWriteOffsetWithinPart = 0;
+ IsThisHeaderSector = TRUE;
}
else
{
- uiReadOffsetWithinPart = uiReadOffsetWithinPart + Adapter->uiSectorSize ;
- uiWriteOffsetWithinPart = uiWriteOffsetWithinPart + Adapter->uiSectorSize ;
+ uiReadOffsetWithinPart = uiReadOffsetWithinPart + Adapter->uiSectorSize;
+ uiWriteOffsetWithinPart = uiWriteOffsetWithinPart + Adapter->uiSectorSize;
- if((eISOReadPart == ISO_IMAGE1) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start) ))
+ if ((eISOReadPart == ISO_IMAGE1) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start)))
{
- eISOReadPart = ISO_IMAGE1_PART2 ;
+ eISOReadPart = ISO_IMAGE1_PART2;
uiReadOffsetWithinPart = 0;
}
- if((eISOReadPart == ISO_IMAGE1_PART2) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start)))
+
+ if ((eISOReadPart == ISO_IMAGE1_PART2) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start)))
{
- eISOReadPart = ISO_IMAGE1_PART3 ;
+ eISOReadPart = ISO_IMAGE1_PART3;
uiReadOffsetWithinPart = 0;
}
- if((eISOWritePart == ISO_IMAGE2) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start)))
+
+ if ((eISOWritePart == ISO_IMAGE2) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start)))
{
- eISOWritePart = ISO_IMAGE2_PART2 ;
+ eISOWritePart = ISO_IMAGE2_PART2;
uiWriteOffsetWithinPart = 0;
}
- if((eISOWritePart == ISO_IMAGE2_PART2) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start)))
+
+ if ((eISOWritePart == ISO_IMAGE2_PART2) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start)))
{
- eISOWritePart = ISO_IMAGE2_PART3 ;
+ eISOWritePart = ISO_IMAGE2_PART3;
uiWriteOffsetWithinPart = 0;
}
}
Status = BcmFlash2xBulkRead(Adapter,
- (PUINT)Buff,
- eISOReadPart,
- uiReadOffsetWithinPart,
- Adapter->uiSectorSize
- );
-
- if(Status)
+ (PUINT)Buff,
+ eISOReadPart,
+ uiReadOffsetWithinPart,
+ Adapter->uiSectorSize);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Read failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOReadPart, uiReadOffsetWithinPart);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOReadPart, uiReadOffsetWithinPart);
break;
}
- if(IsThisHeaderSector == TRUE)
+ if (IsThisHeaderSector == TRUE)
{
- //If this is header sector write 0xFFFFFFFF at the sig time and in last write sig
+ // If this is header sector write 0xFFFFFFFF at the sig time and in last write sig
memcpy(SigBuff, Buff + sigOffset, MAX_RW_SIZE);
- for(i = 0; i < MAX_RW_SIZE;i++)
+ for (i = 0; i < MAX_RW_SIZE; i++)
*(Buff + sigOffset + i) = 0xFF;
}
- Adapter->bHeaderChangeAllowed = TRUE ;
-
+ Adapter->bHeaderChangeAllowed = TRUE;
Status = BcmFlash2xBulkWrite(Adapter,
- (PUINT)Buff,
- eISOWritePart,
- uiWriteOffsetWithinPart,
- Adapter->uiSectorSize,
- TRUE);
- if(Status)
+ (PUINT)Buff,
+ eISOWritePart,
+ uiWriteOffsetWithinPart,
+ Adapter->uiSectorSize,
+ TRUE);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Write failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOWritePart, uiWriteOffsetWithinPart);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOWritePart, uiWriteOffsetWithinPart);
break;
}
Adapter->bHeaderChangeAllowed = FALSE;
-
- if(IsThisHeaderSector == TRUE)
+ if (IsThisHeaderSector == TRUE)
{
WriteToFlashWithoutSectorErase(Adapter,
- SigBuff,
- eISOWritePart,
- sigOffset,
- MAX_RW_SIZE);
- IsThisHeaderSector = FALSE ;
+ SigBuff,
+ eISOWritePart,
+ sigOffset,
+ MAX_RW_SIZE);
+ IsThisHeaderSector = FALSE;
}
//subtracting the written Data
- uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
+ uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize;
}
-
-
}
- if(sCopySectStrut.SrcSection ==ISO_IMAGE2 && sCopySectStrut.DstSection ==ISO_IMAGE1)
+ if (sCopySectStrut.SrcSection == ISO_IMAGE2 && sCopySectStrut.DstSection == ISO_IMAGE1)
{
- eISOReadPart = ISO_IMAGE2 ;
- eISOWritePart = ISO_IMAGE1 ;
- uiReadOffsetWithinPart = 0;
- uiWriteOffsetWithinPart = 0 ;
+ eISOReadPart = ISO_IMAGE2;
+ eISOWritePart = ISO_IMAGE1;
+ uiReadOffsetWithinPart = 0;
+ uiWriteOffsetWithinPart = 0;
- uiTotalDataToCopy =(Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start);
+ uiTotalDataToCopy = (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage2Part3Start);
- if(uiTotalDataToCopy < ISOLength)
+ if (uiTotalDataToCopy < ISOLength)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"error as Source ISO Section does not have valid signature");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "error as Source ISO Section does not have valid signature");
Status = STATUS_FAILURE;
goto out;
}
- uiTotalDataToCopy =(Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start)+
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End) -
- (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start);
+ uiTotalDataToCopy = (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start) +
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3End) -
+ (Adapter->psFlash2xCSInfo->OffsetISOImage1Part3Start);
- if(uiTotalDataToCopy < ISOLength)
+ if (uiTotalDataToCopy < ISOLength)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"error as Dest ISO Section does not have enough section size");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "error as Dest ISO Section does not have enough section size");
Status = STATUS_FAILURE;
goto out;
}
uiTotalDataToCopy = ISOLength;
- CorruptISOSig(Adapter,ISO_IMAGE1);
+ CorruptISOSig(Adapter, ISO_IMAGE1);
- while(uiTotalDataToCopy)
+ while (uiTotalDataToCopy)
{
- if(uiTotalDataToCopy == Adapter->uiSectorSize)
+ if (uiTotalDataToCopy == Adapter->uiSectorSize)
{
//Setting for write of first sector. First sector is assumed to be written in last
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Writing the signature sector");
- eISOReadPart = ISO_IMAGE2 ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Writing the signature sector");
+ eISOReadPart = ISO_IMAGE2;
uiReadOffsetWithinPart = 0;
eISOWritePart = ISO_IMAGE1;
- uiWriteOffsetWithinPart = 0 ;
+ uiWriteOffsetWithinPart = 0;
IsThisHeaderSector = TRUE;
-
}
else
{
- uiReadOffsetWithinPart = uiReadOffsetWithinPart + Adapter->uiSectorSize ;
- uiWriteOffsetWithinPart = uiWriteOffsetWithinPart + Adapter->uiSectorSize ;
+ uiReadOffsetWithinPart = uiReadOffsetWithinPart + Adapter->uiSectorSize;
+ uiWriteOffsetWithinPart = uiWriteOffsetWithinPart + Adapter->uiSectorSize;
- if((eISOReadPart == ISO_IMAGE2) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start) ))
+ if ((eISOReadPart == ISO_IMAGE2) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start)))
{
- eISOReadPart = ISO_IMAGE2_PART2 ;
+ eISOReadPart = ISO_IMAGE2_PART2;
uiReadOffsetWithinPart = 0;
}
- if((eISOReadPart == ISO_IMAGE2_PART2) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start)))
+
+ if ((eISOReadPart == ISO_IMAGE2_PART2) && (uiReadOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage2Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage2Part2Start)))
{
- eISOReadPart = ISO_IMAGE2_PART3 ;
+ eISOReadPart = ISO_IMAGE2_PART3;
uiReadOffsetWithinPart = 0;
}
- if((eISOWritePart == ISO_IMAGE1) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start)))
+
+ if ((eISOWritePart == ISO_IMAGE1) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part1End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start)))
{
- eISOWritePart = ISO_IMAGE1_PART2 ;
+ eISOWritePart = ISO_IMAGE1_PART2;
uiWriteOffsetWithinPart = 0;
}
- if((eISOWritePart == ISO_IMAGE1_PART2) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start)))
+
+ if ((eISOWritePart == ISO_IMAGE1_PART2) && (uiWriteOffsetWithinPart == (Adapter->psFlash2xCSInfo->OffsetISOImage1Part2End - Adapter->psFlash2xCSInfo->OffsetISOImage1Part2Start)))
{
- eISOWritePart = ISO_IMAGE1_PART3 ;
+ eISOWritePart = ISO_IMAGE1_PART3;
uiWriteOffsetWithinPart = 0;
}
}
Status = BcmFlash2xBulkRead(Adapter,
- (PUINT)Buff,
- eISOReadPart,
- uiReadOffsetWithinPart,
- Adapter->uiSectorSize
- );
- if(Status)
+ (PUINT)Buff,
+ eISOReadPart,
+ uiReadOffsetWithinPart,
+ Adapter->uiSectorSize);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Read failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOReadPart, uiReadOffsetWithinPart);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOReadPart, uiReadOffsetWithinPart);
break;
}
- if(IsThisHeaderSector == TRUE)
+ if (IsThisHeaderSector == TRUE)
{
- //If this is header sector write 0xFFFFFFFF at the sig time and in last write sig
+ // If this is header sector write 0xFFFFFFFF at the sig time and in last write sig
memcpy(SigBuff, Buff + sigOffset, MAX_RW_SIZE);
- for(i = 0; i < MAX_RW_SIZE;i++)
+ for (i = 0; i < MAX_RW_SIZE; i++)
*(Buff + sigOffset + i) = 0xFF;
-
}
- Adapter->bHeaderChangeAllowed = TRUE ;
+ Adapter->bHeaderChangeAllowed = TRUE;
Status = BcmFlash2xBulkWrite(Adapter,
- (PUINT)Buff,
- eISOWritePart,
- uiWriteOffsetWithinPart,
- Adapter->uiSectorSize,
- TRUE);
-
- if(Status)
+ (PUINT)Buff,
+ eISOWritePart,
+ uiWriteOffsetWithinPart,
+ Adapter->uiSectorSize,
+ TRUE);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Write failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOWritePart, uiWriteOffsetWithinPart);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write failed while copying ISO: Part: %x, OffsetWithinPart: %x\n", eISOWritePart, uiWriteOffsetWithinPart);
break;
}
- Adapter->bHeaderChangeAllowed = FALSE ;
-
- if(IsThisHeaderSector == TRUE)
+ Adapter->bHeaderChangeAllowed = FALSE;
+ if (IsThisHeaderSector == TRUE)
{
WriteToFlashWithoutSectorErase(Adapter,
- SigBuff,
- eISOWritePart,
- sigOffset,
- MAX_RW_SIZE);
- IsThisHeaderSector = FALSE ;
+ SigBuff,
+ eISOWritePart,
+ sigOffset,
+ MAX_RW_SIZE);
+
+ IsThisHeaderSector = FALSE;
}
- //subtracting the written Data
- uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
+ // subtracting the written Data
+ uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize;
}
-
-
}
-
out:
kfree(Buff);
return Status;
}
+
/**
BcmFlash2xCorruptSig : this API is used to corrupt the written sig in Bcm Header present in flash section.
It will corrupt the sig, if Section is writable, by making first bytes as zero.
**/
+
INT BcmFlash2xCorruptSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
{
+ INT Status = STATUS_SUCCESS;
- INT Status = STATUS_SUCCESS ;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Section Value :%x \n", eFlash2xSectionVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section Value :%x\n", eFlash2xSectionVal);
- if((eFlash2xSectionVal == DSD0) || (eFlash2xSectionVal == DSD1) || (eFlash2xSectionVal == DSD2))
+ if ((eFlash2xSectionVal == DSD0) || (eFlash2xSectionVal == DSD1) || (eFlash2xSectionVal == DSD2))
{
Status = CorruptDSDSig(Adapter, eFlash2xSectionVal);
}
- else if(eFlash2xSectionVal == ISO_IMAGE1 || eFlash2xSectionVal == ISO_IMAGE2)
+ else if (eFlash2xSectionVal == ISO_IMAGE1 || eFlash2xSectionVal == ISO_IMAGE2)
{
Status = CorruptISOSig(Adapter, eFlash2xSectionVal);
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Given Section <%d>does not have Header",eFlash2xSectionVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Given Section <%d>does not have Header", eFlash2xSectionVal);
return STATUS_SUCCESS;
}
return Status;
}
+
/**
BcmFlash2xWriteSig :-this API is used to Write the sig if requested Section has
header and Write Permission.
Failure :-Return negative error code
**/
+
INT BcmFlash2xWriteSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlashSectionVal)
{
-
- UINT uiSignature = 0 ;
+ UINT uiSignature = 0;
UINT uiOffset = 0;
- //DSD_HEADER dsdHeader = {0};
- if(Adapter->bSigCorrupted == FALSE)
+ // DSD_HEADER dsdHeader = {0};
+ if (Adapter->bSigCorrupted == FALSE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Signature is not corrupted by driver, hence not restoring\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Signature is not corrupted by driver, hence not restoring\n");
return STATUS_SUCCESS;
}
- if(Adapter->bAllDSDWriteAllow == FALSE)
+
+ if (Adapter->bAllDSDWriteAllow == FALSE)
{
- if(IsSectionWritable(Adapter,eFlashSectionVal) == FALSE)
+ if (IsSectionWritable(Adapter, eFlashSectionVal) == FALSE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Write signature");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section is not Writable...Hence can't Write signature");
return SECTOR_IS_NOT_WRITABLE;
}
}
- if((eFlashSectionVal == DSD0) ||(eFlashSectionVal == DSD1) || (eFlashSectionVal == DSD2))
+
+ if ((eFlashSectionVal == DSD0) || (eFlashSectionVal == DSD1) || (eFlashSectionVal == DSD2))
{
- uiSignature = htonl(DSD_IMAGE_MAGIC_NUMBER) ;
- uiOffset = Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader ;
+ uiSignature = htonl(DSD_IMAGE_MAGIC_NUMBER);
+ uiOffset = Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader;
- uiOffset += FIELD_OFFSET_IN_HEADER(PDSD_HEADER,DSDImageMagicNumber);
+ uiOffset += FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImageMagicNumber);
- if((ReadDSDSignature(Adapter,eFlashSectionVal) & 0xFF000000) != CORRUPTED_PATTERN)
+ if ((ReadDSDSignature(Adapter, eFlashSectionVal) & 0xFF000000) != CORRUPTED_PATTERN)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Corrupted Pattern is not there. Hence won't write sig");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Corrupted Pattern is not there. Hence won't write sig");
return STATUS_FAILURE;
}
-
}
- else if((eFlashSectionVal == ISO_IMAGE1) || (eFlashSectionVal == ISO_IMAGE2))
+ else if ((eFlashSectionVal == ISO_IMAGE1) || (eFlashSectionVal == ISO_IMAGE2))
{
uiSignature = htonl(ISO_IMAGE_MAGIC_NUMBER);
- //uiOffset = 0;
- uiOffset = FIELD_OFFSET_IN_HEADER(PISO_HEADER,ISOImageMagicNumber);
- if((ReadISOSignature(Adapter,eFlashSectionVal) & 0xFF000000) != CORRUPTED_PATTERN)
+ // uiOffset = 0;
+ uiOffset = FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImageMagicNumber);
+ if ((ReadISOSignature(Adapter, eFlashSectionVal) & 0xFF000000) != CORRUPTED_PATTERN)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Currupted Pattern is not there. Hence won't write sig");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Currupted Pattern is not there. Hence won't write sig");
return STATUS_FAILURE;
}
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"GIVEN SECTION< %d > IS NOT VALID FOR SIG WRITE...", eFlashSectionVal);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "GIVEN SECTION< %d > IS NOT VALID FOR SIG WRITE...", eFlashSectionVal);
return STATUS_FAILURE;
}
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Restoring the signature");
-
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Restoring the signature");
Adapter->bHeaderChangeAllowed = TRUE;
Adapter->bSigCorrupted = FALSE;
- BcmFlash2xBulkWrite(Adapter, &uiSignature,eFlashSectionVal,uiOffset,SIGNATURE_SIZE,TRUE);
+ BcmFlash2xBulkWrite(Adapter, &uiSignature, eFlashSectionVal, uiOffset, SIGNATURE_SIZE, TRUE);
Adapter->bHeaderChangeAllowed = FALSE;
-
-
return STATUS_SUCCESS;
}
+
/**
validateFlash2xReadWrite :- This API is used to validate the user request for Read/Write.
if requested Bytes goes beyond the Requested section, it reports error.
**/
-INT validateFlash2xReadWrite(struct bcm_mini_adapter *Adapter, PFLASH2X_READWRITE psFlash2xReadWrite)
+
+INT validateFlash2xReadWrite(struct bcm_mini_adapter *Adapter, PFLASH2X_READWRITE psFlash2xReadWrite)
{
- UINT uiNumOfBytes = 0 ;
- UINT uiSectStartOffset = 0 ;
+ UINT uiNumOfBytes = 0;
+ UINT uiSectStartOffset = 0;
UINT uiSectEndOffset = 0;
+
uiNumOfBytes = psFlash2xReadWrite->numOfBytes;
- if(IsSectionExistInFlash(Adapter,psFlash2xReadWrite->Section) != TRUE)
+ if (IsSectionExistInFlash(Adapter, psFlash2xReadWrite->Section) != TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section<%x> does not exixt in Flash",psFlash2xReadWrite->Section);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section<%x> does not exixt in Flash", psFlash2xReadWrite->Section);
return FALSE;
}
- uiSectStartOffset = BcmGetSectionValStartOffset(Adapter,psFlash2xReadWrite->Section);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Start offset :%x ,section :%d\n",uiSectStartOffset,psFlash2xReadWrite->Section);
- if((psFlash2xReadWrite->Section == ISO_IMAGE1) ||(psFlash2xReadWrite->Section == ISO_IMAGE2))
+ uiSectStartOffset = BcmGetSectionValStartOffset(Adapter, psFlash2xReadWrite->Section);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Start offset :%x ,section :%d\n", uiSectStartOffset, psFlash2xReadWrite->Section);
+ if ((psFlash2xReadWrite->Section == ISO_IMAGE1) || (psFlash2xReadWrite->Section == ISO_IMAGE2))
{
- if(psFlash2xReadWrite->Section == ISO_IMAGE1)
+ if (psFlash2xReadWrite->Section == ISO_IMAGE1)
{
- uiSectEndOffset = BcmGetSectionValEndOffset(Adapter,ISO_IMAGE1) -
- BcmGetSectionValStartOffset(Adapter,ISO_IMAGE1)+
- BcmGetSectionValEndOffset(Adapter,ISO_IMAGE1_PART2) -
- BcmGetSectionValStartOffset(Adapter,ISO_IMAGE1_PART2)+
- BcmGetSectionValEndOffset(Adapter,ISO_IMAGE1_PART3) -
- BcmGetSectionValStartOffset(Adapter,ISO_IMAGE1_PART3);
+ uiSectEndOffset = BcmGetSectionValEndOffset(Adapter, ISO_IMAGE1) -
+ BcmGetSectionValStartOffset(Adapter, ISO_IMAGE1) +
+ BcmGetSectionValEndOffset(Adapter, ISO_IMAGE1_PART2) -
+ BcmGetSectionValStartOffset(Adapter, ISO_IMAGE1_PART2) +
+ BcmGetSectionValEndOffset(Adapter, ISO_IMAGE1_PART3) -
+ BcmGetSectionValStartOffset(Adapter, ISO_IMAGE1_PART3);
}
- else if(psFlash2xReadWrite->Section == ISO_IMAGE2)
+ else if (psFlash2xReadWrite->Section == ISO_IMAGE2)
{
- uiSectEndOffset = BcmGetSectionValEndOffset(Adapter,ISO_IMAGE2) -
- BcmGetSectionValStartOffset(Adapter,ISO_IMAGE2)+
- BcmGetSectionValEndOffset(Adapter,ISO_IMAGE2_PART2) -
- BcmGetSectionValStartOffset(Adapter,ISO_IMAGE2_PART2)+
- BcmGetSectionValEndOffset(Adapter,ISO_IMAGE2_PART3) -
- BcmGetSectionValStartOffset(Adapter,ISO_IMAGE2_PART3);
-
+ uiSectEndOffset = BcmGetSectionValEndOffset(Adapter, ISO_IMAGE2) -
+ BcmGetSectionValStartOffset(Adapter, ISO_IMAGE2) +
+ BcmGetSectionValEndOffset(Adapter, ISO_IMAGE2_PART2) -
+ BcmGetSectionValStartOffset(Adapter, ISO_IMAGE2_PART2) +
+ BcmGetSectionValEndOffset(Adapter, ISO_IMAGE2_PART3) -
+ BcmGetSectionValStartOffset(Adapter, ISO_IMAGE2_PART3);
}
- //since this uiSectEndoffset is the size of iso Image. hence for calculating the vitual endoffset
- //it should be added in startoffset. so that check done in last of this function can be valued.
- uiSectEndOffset = uiSectStartOffset + uiSectEndOffset ;
+ // since this uiSectEndoffset is the size of iso Image. hence for calculating the vitual endoffset
+ // it should be added in startoffset. so that check done in last of this function can be valued.
+ uiSectEndOffset = uiSectStartOffset + uiSectEndOffset;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Total size of the ISO Image :%x",uiSectEndOffset);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Total size of the ISO Image :%x", uiSectEndOffset);
}
else
- uiSectEndOffset = BcmGetSectionValEndOffset(Adapter,psFlash2xReadWrite->Section);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "End offset :%x \n",uiSectEndOffset);
+ uiSectEndOffset = BcmGetSectionValEndOffset(Adapter, psFlash2xReadWrite->Section);
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "End offset :%x\n", uiSectEndOffset);
- //Checking the boundary condition
- if((uiSectStartOffset + psFlash2xReadWrite->offset + uiNumOfBytes) <= uiSectEndOffset)
+ // Checking the boundary condition
+ if ((uiSectStartOffset + psFlash2xReadWrite->offset + uiNumOfBytes) <= uiSectEndOffset)
return TRUE;
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Invalid Request....");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Invalid Request....");
return FALSE;
}
-
}
/**
INT IsFlash2x(struct bcm_mini_adapter *Adapter)
{
- if(Adapter->uiFlashLayoutMajorVersion >= FLASH_2X_MAJOR_NUMBER)
- return TRUE ;
+ if (Adapter->uiFlashLayoutMajorVersion >= FLASH_2X_MAJOR_NUMBER)
+ return TRUE;
else
return FALSE;
}
+
/**
GetFlashBaseAddr :- Calculate the Flash Base address
@Adapater :- Bcm Driver Private Data Structure
static INT GetFlashBaseAddr(struct bcm_mini_adapter *Adapter)
{
-
UINT uiBaseAddr = 0;
- if(Adapter->bDDRInitDone)
+ if (Adapter->bDDRInitDone)
{
/*
- For All Valid Flash Versions... except 1.1, take the value from FlashBaseAddr
- In case of Raw Read... use the default value
+ For All Valid Flash Versions... except 1.1, take the value from FlashBaseAddr
+ In case of Raw Read... use the default value
*/
- if(Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == FALSE) &&
- !((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1))
- )
- uiBaseAddr = Adapter->uiFlashBaseAdd ;
+ if (Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == FALSE) &&
+ !((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1)))
+ uiBaseAddr = Adapter->uiFlashBaseAdd;
else
uiBaseAddr = FLASH_CONTIGIOUS_START_ADDR_AFTER_INIT;
}
else
{
/*
- For All Valid Flash Versions... except 1.1, take the value from FlashBaseAddr
- In case of Raw Read... use the default value
+ For All Valid Flash Versions... except 1.1, take the value from FlashBaseAddr
+ In case of Raw Read... use the default value
*/
- if(Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == FALSE) &&
- !((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1))
- )
+ if (Adapter->uiFlashLayoutMajorVersion && (Adapter->bFlashRawRead == FALSE) &&
+ !((Adapter->uiFlashLayoutMajorVersion == 1) && (Adapter->uiFlashLayoutMinorVersion == 1)))
uiBaseAddr = Adapter->uiFlashBaseAdd | FLASH_CONTIGIOUS_START_ADDR_BEFORE_INIT;
else
uiBaseAddr = FLASH_CONTIGIOUS_START_ADDR_BEFORE_INIT;
}
- return uiBaseAddr ;
+ return uiBaseAddr;
}
+
/**
BcmCopySection :- This API is used to copy the One section in another. Both section should
be contiuous and of same size. Hence this Will not be applicabe to copy ISO.
**/
-INT BcmCopySection(struct bcm_mini_adapter *Adapter,
- FLASH2X_SECTION_VAL SrcSection,
- FLASH2X_SECTION_VAL DstSection,
- UINT offset,
- UINT numOfBytes)
+INT BcmCopySection(struct bcm_mini_adapter *Adapter,
+ FLASH2X_SECTION_VAL SrcSection,
+ FLASH2X_SECTION_VAL DstSection,
+ UINT offset,
+ UINT numOfBytes)
{
- UINT BuffSize = 0 ;
+ UINT BuffSize = 0;
UINT BytesToBeCopied = 0;
- PUCHAR pBuff = NULL ;
- INT Status = STATUS_SUCCESS ;
- if(SrcSection == DstSection)
+ PUCHAR pBuff = NULL;
+ INT Status = STATUS_SUCCESS;
+
+ if (SrcSection == DstSection)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Source and Destination should be different ...try again");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Source and Destination should be different ...try again");
return -EINVAL;
}
- if((SrcSection != DSD0) && (SrcSection != DSD1) && (SrcSection != DSD2))
+
+ if ((SrcSection != DSD0) && (SrcSection != DSD1) && (SrcSection != DSD2))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Source should be DSD subsection");
- return -EINVAL;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Source should be DSD subsection");
+ return -EINVAL;
}
- if((DstSection != DSD0) && (DstSection != DSD1) && (DstSection != DSD2))
+
+ if ((DstSection != DSD0) && (DstSection != DSD1) && (DstSection != DSD2))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Destination should be DSD subsection");
- return -EINVAL;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Destination should be DSD subsection");
+ return -EINVAL;
}
- //if offset zero means have to copy complete secton
-
- if(numOfBytes == 0)
+ // if offset zero means have to copy complete secton
+ if (numOfBytes == 0)
{
- numOfBytes = BcmGetSectionValEndOffset(Adapter,SrcSection)
- - BcmGetSectionValStartOffset(Adapter,SrcSection);
+ numOfBytes = BcmGetSectionValEndOffset(Adapter, SrcSection)
+ - BcmGetSectionValStartOffset(Adapter, SrcSection);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL," Section Size :0x%x",numOfBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Section Size :0x%x", numOfBytes);
}
- if((offset + numOfBytes) > BcmGetSectionValEndOffset(Adapter,SrcSection)
- - BcmGetSectionValStartOffset(Adapter,SrcSection))
+ if ((offset + numOfBytes) > BcmGetSectionValEndOffset(Adapter, SrcSection)
+ - BcmGetSectionValStartOffset(Adapter, SrcSection))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0," Input parameters going beyond the section offS: %x numB: %x of Source Section\n",
- offset, numOfBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, " Input parameters going beyond the section offS: %x numB: %x of Source Section\n",
+ offset, numOfBytes);
return -EINVAL;
}
- if((offset + numOfBytes) > BcmGetSectionValEndOffset(Adapter,DstSection)
- - BcmGetSectionValStartOffset(Adapter,DstSection))
+ if ((offset + numOfBytes) > BcmGetSectionValEndOffset(Adapter, DstSection)
+ - BcmGetSectionValStartOffset(Adapter, DstSection))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0," Input parameters going beyond the section offS: %x numB: %x of Destination Section\n",
- offset, numOfBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Input parameters going beyond the section offS: %x numB: %x of Destination Section\n",
+ offset, numOfBytes);
return -EINVAL;
}
-
- if(numOfBytes > Adapter->uiSectorSize )
+ if (numOfBytes > Adapter->uiSectorSize)
BuffSize = Adapter->uiSectorSize;
else
- BuffSize = numOfBytes ;
+ BuffSize = numOfBytes;
pBuff = (PCHAR)kzalloc(BuffSize, GFP_KERNEL);
- if(pBuff == NULL)
+ if (pBuff == NULL)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Memory allocation failed.. ");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed.. ");
return -ENOMEM;
}
-
- BytesToBeCopied = Adapter->uiSectorSize ;
- if(offset % Adapter->uiSectorSize)
+ BytesToBeCopied = Adapter->uiSectorSize;
+ if (offset % Adapter->uiSectorSize)
BytesToBeCopied = Adapter->uiSectorSize - (offset % Adapter->uiSectorSize);
- if(BytesToBeCopied > numOfBytes)
- BytesToBeCopied = numOfBytes ;
-
-
+ if (BytesToBeCopied > numOfBytes)
+ BytesToBeCopied = numOfBytes;
Adapter->bHeaderChangeAllowed = TRUE;
do
{
- Status = BcmFlash2xBulkRead(Adapter, (PUINT)pBuff, SrcSection , offset,BytesToBeCopied);
- if(Status)
+ Status = BcmFlash2xBulkRead(Adapter, (PUINT)pBuff, SrcSection , offset, BytesToBeCopied);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Read failed at offset :%d for NOB :%d", SrcSection,BytesToBeCopied);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read failed at offset :%d for NOB :%d", SrcSection, BytesToBeCopied);
break;
}
- Status = BcmFlash2xBulkWrite(Adapter,(PUINT)pBuff,DstSection,offset,BytesToBeCopied,FALSE);
- if(Status)
+ Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pBuff, DstSection, offset, BytesToBeCopied, FALSE);
+ if (Status)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Write failed at offset :%d for NOB :%d", DstSection,BytesToBeCopied);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Write failed at offset :%d for NOB :%d", DstSection, BytesToBeCopied);
break;
}
offset = offset + BytesToBeCopied;
- numOfBytes = numOfBytes - BytesToBeCopied ;
- if(numOfBytes)
+ numOfBytes = numOfBytes - BytesToBeCopied;
+ if (numOfBytes)
{
- if(numOfBytes > Adapter->uiSectorSize )
+ if (numOfBytes > Adapter->uiSectorSize)
BytesToBeCopied = Adapter->uiSectorSize;
else
BytesToBeCopied = numOfBytes;
}
- }while(numOfBytes > 0) ;
+ } while (numOfBytes > 0);
+
kfree(pBuff);
- Adapter->bHeaderChangeAllowed = FALSE ;
+ Adapter->bHeaderChangeAllowed = FALSE;
+
return Status;
}
INT SaveHeaderIfPresent(struct bcm_mini_adapter *Adapter, PUCHAR pBuff, UINT uiOffset)
{
- UINT offsetToProtect = 0,HeaderSizeToProtect =0;
- BOOLEAN bHasHeader = FALSE ;
- PUCHAR pTempBuff =NULL;
+ UINT offsetToProtect = 0, HeaderSizeToProtect = 0;
+ BOOLEAN bHasHeader = FALSE;
+ PUCHAR pTempBuff = NULL;
UINT uiSectAlignAddr = 0;
UINT sig = 0;
//making the offset sector aligned
uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
-
- if((uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter,DSD2)- Adapter->uiSectorSize)||
- (uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter,DSD1)- Adapter->uiSectorSize)||
- (uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter,DSD0)- Adapter->uiSectorSize))
+ if ((uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter, DSD2) - Adapter->uiSectorSize) ||
+ (uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter, DSD1) - Adapter->uiSectorSize) ||
+ (uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter, DSD0) - Adapter->uiSectorSize))
{
-
- //offset from the sector boundary having the header map
+ // offset from the sector boundary having the header map
offsetToProtect = Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader % Adapter->uiSectorSize;
HeaderSizeToProtect = sizeof(DSD_HEADER);
- bHasHeader = TRUE ;
+ bHasHeader = TRUE;
}
- if(uiSectAlignAddr == BcmGetSectionValStartOffset(Adapter,ISO_IMAGE1) ||
- uiSectAlignAddr == BcmGetSectionValStartOffset(Adapter,ISO_IMAGE2))
+ if (uiSectAlignAddr == BcmGetSectionValStartOffset(Adapter, ISO_IMAGE1) ||
+ uiSectAlignAddr == BcmGetSectionValStartOffset(Adapter, ISO_IMAGE2))
{
offsetToProtect = 0;
HeaderSizeToProtect = sizeof(ISO_HEADER);
bHasHeader = TRUE;
}
- //If Header is present overwrite passed buffer with this
- if(bHasHeader && (Adapter->bHeaderChangeAllowed == FALSE))
+ // If Header is present overwrite passed buffer with this
+ if (bHasHeader && (Adapter->bHeaderChangeAllowed == FALSE))
{
pTempBuff = (PUCHAR)kzalloc(HeaderSizeToProtect, GFP_KERNEL);
- if(pTempBuff == NULL)
+ if (pTempBuff == NULL)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Memory allocation failed ");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed");
return -ENOMEM;
}
- //Read header
- BeceemFlashBulkRead(Adapter,(PUINT)pTempBuff,(uiSectAlignAddr + offsetToProtect),HeaderSizeToProtect);
- BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,pTempBuff ,HeaderSizeToProtect);
+ // Read header
+ BeceemFlashBulkRead(Adapter, (PUINT)pTempBuff, (uiSectAlignAddr + offsetToProtect), HeaderSizeToProtect);
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, pTempBuff, HeaderSizeToProtect);
//Replace Buffer content with Header
- memcpy(pBuff +offsetToProtect,pTempBuff,HeaderSizeToProtect);
+ memcpy(pBuff + offsetToProtect, pTempBuff, HeaderSizeToProtect);
kfree(pTempBuff);
}
- if(bHasHeader && Adapter->bSigCorrupted)
+ if (bHasHeader && Adapter->bSigCorrupted)
{
- sig = *((PUINT)(pBuff + offsetToProtect + FIELD_OFFSET_IN_HEADER(PDSD_HEADER,DSDImageMagicNumber)));
+ sig = *((PUINT)(pBuff + offsetToProtect + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImageMagicNumber)));
sig = ntohl(sig);
- if((sig & 0xFF000000) != CORRUPTED_PATTERN)
+ if ((sig & 0xFF000000) != CORRUPTED_PATTERN)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Desired pattern is not at sig offset. Hence won't restore");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Desired pattern is not at sig offset. Hence won't restore");
Adapter->bSigCorrupted = FALSE;
return STATUS_SUCCESS;
}
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL," Corrupted sig is :%X", sig);
- *((PUINT)(pBuff + offsetToProtect + FIELD_OFFSET_IN_HEADER(PDSD_HEADER,DSDImageMagicNumber)))= htonl(DSD_IMAGE_MAGIC_NUMBER);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Restoring the signature in Header Write only");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, " Corrupted sig is :%X", sig);
+ *((PUINT)(pBuff + offsetToProtect + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImageMagicNumber))) = htonl(DSD_IMAGE_MAGIC_NUMBER);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Restoring the signature in Header Write only");
Adapter->bSigCorrupted = FALSE;
}
- return STATUS_SUCCESS ;
+ return STATUS_SUCCESS;
}
/**
UINT GPIOConfig = 0;
UINT PartNum = 0;
- ChipNum = offset / FLASH_PART_SIZE ;
+ ChipNum = offset / FLASH_PART_SIZE;
//
// Chip Select mapping to enable flash0.
//
/*
- SelectedChip Variable is the selection that the host is 100% Sure the same as what the register will hold. This can be ONLY ensured
- if the Chip doesn't goes to low power mode while the flash operation is in progress (NVMRdmWrmLock is taken)
- Before every new Flash Write operation, we reset the variable. This is to ensure that after any wake-up from
- power down modes (Idle mode/shutdown mode), the values in the register will be different.
+ SelectedChip Variable is the selection that the host is 100% Sure the same as what the register will hold. This can be ONLY ensured
+ if the Chip doesn't goes to low power mode while the flash operation is in progress (NVMRdmWrmLock is taken)
+ Before every new Flash Write operation, we reset the variable. This is to ensure that after any wake-up from
+ power down modes (Idle mode/shutdown mode), the values in the register will be different.
*/
- if(Adapter->SelectedChip == ChipNum)
- return STATUS_SUCCESS;
+ if (Adapter->SelectedChip == ChipNum)
+ return STATUS_SUCCESS;
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Selected Chip :%x", ChipNum);
- Adapter->SelectedChip = ChipNum ;
+ // BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Selected Chip :%x", ChipNum);
+ Adapter->SelectedChip = ChipNum;
- //bit[13..12] will select the appropriate chip
+ // bit[13..12] will select the appropriate chip
rdmalt(Adapter, FLASH_CONFIG_REG, &FlashConfig, 4);
rdmalt(Adapter, FLASH_GPIO_CONFIG_REG, &GPIOConfig, 4);
-
{
- switch(ChipNum)
+ switch (ChipNum)
{
- case 0:
- PartNum = 0;
- break;
- case 1:
- PartNum = 3;
- GPIOConfig |= (0x4 << CHIP_SELECT_BIT12);
- break;
- case 2:
- PartNum = 1;
- GPIOConfig |= (0x1 << CHIP_SELECT_BIT12);
- break;
- case 3:
- PartNum = 2;
- GPIOConfig |= (0x2 << CHIP_SELECT_BIT12);
- break;
+ case 0:
+ PartNum = 0;
+ break;
+ case 1:
+ PartNum = 3;
+ GPIOConfig |= (0x4 << CHIP_SELECT_BIT12);
+ break;
+ case 2:
+ PartNum = 1;
+ GPIOConfig |= (0x1 << CHIP_SELECT_BIT12);
+ break;
+ case 3:
+ PartNum = 2;
+ GPIOConfig |= (0x2 << CHIP_SELECT_BIT12);
+ break;
}
}
/* In case the bits already written in the FLASH_CONFIG_REG is same as what the user desired,
- nothing to do... can return immediately.
- ASSUMPTION: FLASH_GPIO_CONFIG_REG will be in sync with FLASH_CONFIG_REG.
- Even if the chip goes to low power mode, it should wake with values in each register in sync with each other.
- These values are not written by host other than during CHIP_SELECT.
+ nothing to do... can return immediately.
+ ASSUMPTION: FLASH_GPIO_CONFIG_REG will be in sync with FLASH_CONFIG_REG.
+ Even if the chip goes to low power mode, it should wake with values in each register in sync with each other.
+ These values are not written by host other than during CHIP_SELECT.
*/
- if(PartNum == ((FlashConfig >> CHIP_SELECT_BIT12) & 0x3))
+ if (PartNum == ((FlashConfig >> CHIP_SELECT_BIT12) & 0x3))
return STATUS_SUCCESS;
- //clearing the bit[13..12]
+ // clearing the bit[13..12]
FlashConfig &= 0xFFFFCFFF;
- FlashConfig = (FlashConfig | (PartNum<<CHIP_SELECT_BIT12)); //00
+ FlashConfig = (FlashConfig | (PartNum<<CHIP_SELECT_BIT12)); // 00
- wrmalt(Adapter,FLASH_GPIO_CONFIG_REG, &GPIOConfig, 4);
+ wrmalt(Adapter, FLASH_GPIO_CONFIG_REG, &GPIOConfig, 4);
udelay(100);
- wrmalt(Adapter,FLASH_CONFIG_REG, &FlashConfig, 4);
+ wrmalt(Adapter, FLASH_CONFIG_REG, &FlashConfig, 4);
udelay(100);
return STATUS_SUCCESS;
-
}
+
INT ReadDSDSignature(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL dsd)
{
- UINT uiDSDsig = 0;
- //UINT sigoffsetInMap = 0;
- //DSD_HEADER dsdHeader = {0};
+ UINT uiDSDsig = 0;
+ //UINT sigoffsetInMap = 0;
+ //DSD_HEADER dsdHeader = {0};
- //sigoffsetInMap =(PUCHAR)&(dsdHeader.DSDImageMagicNumber) -(PUCHAR)&dsdHeader;
+ //sigoffsetInMap =(PUCHAR)&(dsdHeader.DSDImageMagicNumber) -(PUCHAR)&dsdHeader;
- if(dsd != DSD0 && dsd != DSD1 && dsd != DSD2)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"passed section value is not for DSDs");
- return STATUS_FAILURE;
- }
- BcmFlash2xBulkRead(Adapter,
- &uiDSDsig,
- dsd,
- Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER,DSDImageMagicNumber),
- SIGNATURE_SIZE);
+ if (dsd != DSD0 && dsd != DSD1 && dsd != DSD2)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "passed section value is not for DSDs");
+ return STATUS_FAILURE;
+ }
+ BcmFlash2xBulkRead(Adapter,
+ &uiDSDsig,
+ dsd,
+ Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImageMagicNumber),
+ SIGNATURE_SIZE);
- uiDSDsig = ntohl(uiDSDsig);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"DSD SIG :%x", uiDSDsig);
+ uiDSDsig = ntohl(uiDSDsig);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "DSD SIG :%x", uiDSDsig);
- return uiDSDsig ;
+ return uiDSDsig;
}
+
INT ReadDSDPriority(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL dsd)
{
- //UINT priOffsetInMap = 0 ;
+ // UINT priOffsetInMap = 0 ;
unsigned int uiDSDPri = STATUS_FAILURE;
- //DSD_HEADER dsdHeader = {0};
- //priOffsetInMap = (PUCHAR)&(dsdHeader.DSDImagePriority) -(PUCHAR)&dsdHeader;
- if(IsSectionWritable(Adapter,dsd))
+ // DSD_HEADER dsdHeader = {0};
+ // priOffsetInMap = (PUCHAR)&(dsdHeader.DSDImagePriority) -(PUCHAR)&dsdHeader;
+ if (IsSectionWritable(Adapter, dsd))
{
- if(ReadDSDSignature(Adapter,dsd)== DSD_IMAGE_MAGIC_NUMBER)
+ if (ReadDSDSignature(Adapter, dsd) == DSD_IMAGE_MAGIC_NUMBER)
{
BcmFlash2xBulkRead(Adapter,
- &uiDSDPri,
- dsd,
- Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader +FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
- 4);
+ &uiDSDPri,
+ dsd,
+ Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + FIELD_OFFSET_IN_HEADER(PDSD_HEADER, DSDImagePriority),
+ 4);
uiDSDPri = ntohl(uiDSDPri);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"DSD<%x> Priority :%x", dsd, uiDSDPri);
-
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "DSD<%x> Priority :%x", dsd, uiDSDPri);
}
}
+
return uiDSDPri;
}
+
FLASH2X_SECTION_VAL getHighestPriDSD(struct bcm_mini_adapter *Adapter)
{
INT DSDHighestPri = STATUS_FAILURE;
- INT DsdPri= 0 ;
- FLASH2X_SECTION_VAL HighestPriDSD = 0 ;
+ INT DsdPri = 0;
+ FLASH2X_SECTION_VAL HighestPriDSD = 0;
- if(IsSectionWritable(Adapter,DSD2))
+ if (IsSectionWritable(Adapter, DSD2))
{
- DSDHighestPri = ReadDSDPriority(Adapter,DSD2);
- HighestPriDSD = DSD2 ;
+ DSDHighestPri = ReadDSDPriority(Adapter, DSD2);
+ HighestPriDSD = DSD2;
}
- if(IsSectionWritable(Adapter,DSD1))
+
+ if (IsSectionWritable(Adapter, DSD1))
{
- DsdPri = ReadDSDPriority(Adapter,DSD1);
- if(DSDHighestPri < DsdPri)
- {
- DSDHighestPri = DsdPri ;
+ DsdPri = ReadDSDPriority(Adapter, DSD1);
+ if (DSDHighestPri < DsdPri)
+ {
+ DSDHighestPri = DsdPri;
HighestPriDSD = DSD1;
- }
+ }
}
- if(IsSectionWritable(Adapter,DSD0))
+
+ if (IsSectionWritable(Adapter, DSD0))
{
- DsdPri = ReadDSDPriority(Adapter,DSD0);
- if(DSDHighestPri < DsdPri)
- {
- DSDHighestPri = DsdPri ;
+ DsdPri = ReadDSDPriority(Adapter, DSD0);
+ if (DSDHighestPri < DsdPri)
+ {
+ DSDHighestPri = DsdPri;
HighestPriDSD = DSD0;
- }
+ }
}
- if(HighestPriDSD)
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Highest DSD :%x , and its Pri :%x", HighestPriDSD, DSDHighestPri);
- return HighestPriDSD ;
+ if (HighestPriDSD)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Highest DSD :%x , and its Pri :%x", HighestPriDSD, DSDHighestPri);
+
+ return HighestPriDSD;
}
INT ReadISOSignature(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL iso)
{
- UINT uiISOsig = 0;
- //UINT sigoffsetInMap = 0;
- //ISO_HEADER ISOHeader = {0};
+ UINT uiISOsig = 0;
+ //UINT sigoffsetInMap = 0;
+ //ISO_HEADER ISOHeader = {0};
+ //sigoffsetInMap =(PUCHAR)&(ISOHeader.ISOImageMagicNumber) -(PUCHAR)&ISOHeader;
+ if (iso != ISO_IMAGE1 && iso != ISO_IMAGE2)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "passed section value is not for ISOs");
+ return STATUS_FAILURE;
+ }
+ BcmFlash2xBulkRead(Adapter,
+ &uiISOsig,
+ iso,
+ 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImageMagicNumber),
+ SIGNATURE_SIZE);
- //sigoffsetInMap =(PUCHAR)&(ISOHeader.ISOImageMagicNumber) -(PUCHAR)&ISOHeader;
-
- if(iso != ISO_IMAGE1 && iso != ISO_IMAGE2)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"passed section value is not for ISOs");
- return STATUS_FAILURE;
- }
- BcmFlash2xBulkRead(Adapter,
- &uiISOsig,
- iso,
- 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER,ISOImageMagicNumber),
- SIGNATURE_SIZE);
-
- uiISOsig = ntohl(uiISOsig);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"ISO SIG :%x", uiISOsig);
+ uiISOsig = ntohl(uiISOsig);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "ISO SIG :%x", uiISOsig);
- return uiISOsig ;
+ return uiISOsig;
}
+
INT ReadISOPriority(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL iso)
{
-
unsigned int ISOPri = STATUS_FAILURE;
- if(IsSectionWritable(Adapter,iso))
+ if (IsSectionWritable(Adapter, iso))
{
- if(ReadISOSignature(Adapter,iso)== ISO_IMAGE_MAGIC_NUMBER)
+ if (ReadISOSignature(Adapter, iso) == ISO_IMAGE_MAGIC_NUMBER)
{
BcmFlash2xBulkRead(Adapter,
- &ISOPri,
- iso,
- 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImagePriority),
- 4);
+ &ISOPri,
+ iso,
+ 0 + FIELD_OFFSET_IN_HEADER(PISO_HEADER, ISOImagePriority),
+ 4);
ISOPri = ntohl(ISOPri);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"ISO<%x> Priority :%x", iso, ISOPri);
-
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "ISO<%x> Priority :%x", iso, ISOPri);
}
}
+
return ISOPri;
}
+
FLASH2X_SECTION_VAL getHighestPriISO(struct bcm_mini_adapter *Adapter)
{
INT ISOHighestPri = STATUS_FAILURE;
- INT ISOPri= 0 ;
- FLASH2X_SECTION_VAL HighestPriISO = NO_SECTION_VAL ;
+ INT ISOPri = 0;
+ FLASH2X_SECTION_VAL HighestPriISO = NO_SECTION_VAL;
- if(IsSectionWritable(Adapter,ISO_IMAGE2))
+ if (IsSectionWritable(Adapter, ISO_IMAGE2))
{
- ISOHighestPri = ReadISOPriority(Adapter,ISO_IMAGE2);
- HighestPriISO = ISO_IMAGE2 ;
+ ISOHighestPri = ReadISOPriority(Adapter, ISO_IMAGE2);
+ HighestPriISO = ISO_IMAGE2;
}
- if(IsSectionWritable(Adapter,ISO_IMAGE1))
+
+ if (IsSectionWritable(Adapter, ISO_IMAGE1))
{
- ISOPri = ReadISOPriority(Adapter,ISO_IMAGE1);
- if(ISOHighestPri < ISOPri)
- {
- ISOHighestPri = ISOPri ;
+ ISOPri = ReadISOPriority(Adapter, ISO_IMAGE1);
+ if (ISOHighestPri < ISOPri)
+ {
+ ISOHighestPri = ISOPri;
HighestPriISO = ISO_IMAGE1;
- }
+ }
}
- if(HighestPriISO)
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Highest ISO :%x and its Pri :%x",HighestPriISO,ISOHighestPri);
- return HighestPriISO ;
+ if (HighestPriISO)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Highest ISO :%x and its Pri :%x", HighestPriISO, ISOHighestPri);
+
+ return HighestPriISO;
}
+
INT WriteToFlashWithoutSectorErase(struct bcm_mini_adapter *Adapter,
- PUINT pBuff,
- FLASH2X_SECTION_VAL eFlash2xSectionVal,
- UINT uiOffset,
- UINT uiNumBytes
- )
+ PUINT pBuff,
+ FLASH2X_SECTION_VAL eFlash2xSectionVal,
+ UINT uiOffset,
+ UINT uiNumBytes)
{
-#if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
- UINT uiTemp = 0, value = 0 ;
- UINT i = 0;
- UINT uiPartOffset = 0;
-#endif
+ #if !defined(BCM_SHM_INTERFACE) || defined(FLASH_DIRECT_ACCESS)
+ UINT uiTemp = 0, value = 0;
+ UINT i = 0;
+ UINT uiPartOffset = 0;
+ #endif
UINT uiStartOffset = 0;
- //Adding section start address
+ // Adding section start address
INT Status = STATUS_SUCCESS;
PUCHAR pcBuff = (PUCHAR)pBuff;
- if(uiNumBytes % Adapter->ulFlashWriteSize)
+ if (uiNumBytes % Adapter->ulFlashWriteSize)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Writing without Sector Erase for non-FlashWriteSize number of bytes 0x%x\n", uiNumBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Writing without Sector Erase for non-FlashWriteSize number of bytes 0x%x\n", uiNumBytes);
return STATUS_FAILURE;
}
- uiStartOffset = BcmGetSectionValStartOffset(Adapter,eFlash2xSectionVal);
+ uiStartOffset = BcmGetSectionValStartOffset(Adapter, eFlash2xSectionVal);
- if(IsSectionExistInVendorInfo(Adapter,eFlash2xSectionVal))
+ if (IsSectionExistInVendorInfo(Adapter, eFlash2xSectionVal))
{
return vendorextnWriteSectionWithoutErase(Adapter, pcBuff, eFlash2xSectionVal, uiOffset, uiNumBytes);
}
uiOffset = uiOffset + uiStartOffset;
-#if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
- Status = bcmflash_raw_writenoerase((uiOffset/FLASH_PART_SIZE),(uiOffset % FLASH_PART_SIZE), pcBuff,uiNumBytes);
-#else
- rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
- value = 0;
- wrmalt(Adapter, 0x0f000C80,&value, sizeof(value));
+ #if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
+ Status = bcmflash_raw_writenoerase((uiOffset / FLASH_PART_SIZE), (uiOffset % FLASH_PART_SIZE), pcBuff, uiNumBytes);
+ #else
+ rdmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
+ value = 0;
+ wrmalt(Adapter, 0x0f000C80, &value, sizeof(value));
- Adapter->SelectedChip = RESET_CHIP_SELECT;
- BcmDoChipSelect(Adapter,uiOffset);
- uiPartOffset = (uiOffset & (FLASH_PART_SIZE - 1)) + GetFlashBaseAddr(Adapter);
+ Adapter->SelectedChip = RESET_CHIP_SELECT;
+ BcmDoChipSelect(Adapter, uiOffset);
+ uiPartOffset = (uiOffset & (FLASH_PART_SIZE - 1)) + GetFlashBaseAddr(Adapter);
- for(i = 0 ; i< uiNumBytes; i += Adapter->ulFlashWriteSize)
- {
- if(Adapter->ulFlashWriteSize == BYTE_WRITE_SUPPORT)
- Status = flashByteWrite(Adapter,uiPartOffset, pcBuff);
- else
- Status = flashWrite(Adapter,uiPartOffset, pcBuff);
+ for (i = 0 ; i < uiNumBytes; i += Adapter->ulFlashWriteSize)
+ {
+ if (Adapter->ulFlashWriteSize == BYTE_WRITE_SUPPORT)
+ Status = flashByteWrite(Adapter, uiPartOffset, pcBuff);
+ else
+ Status = flashWrite(Adapter, uiPartOffset, pcBuff);
- if(Status != STATUS_SUCCESS)
- break;
+ if (Status != STATUS_SUCCESS)
+ break;
- pcBuff = pcBuff + Adapter->ulFlashWriteSize;
- uiPartOffset = uiPartOffset + Adapter->ulFlashWriteSize;
- }
- wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
- Adapter->SelectedChip = RESET_CHIP_SELECT;
-#endif
+ pcBuff = pcBuff + Adapter->ulFlashWriteSize;
+ uiPartOffset = uiPartOffset + Adapter->ulFlashWriteSize;
+ }
+ wrmalt(Adapter, 0x0f000C80, &uiTemp, sizeof(uiTemp));
+ Adapter->SelectedChip = RESET_CHIP_SELECT;
+ #endif
return Status;
}
BOOLEAN IsSectionExistInFlash(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL section)
{
+ BOOLEAN SectionPresent = FALSE;
- BOOLEAN SectionPresent = FALSE ;
-
- switch(section)
+ switch (section)
{
-
- case ISO_IMAGE1 :
- if((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start != UNINIT_PTR_IN_CS) &&
- (IsNonCDLessDevice(Adapter) == FALSE))
- SectionPresent = TRUE ;
- break;
- case ISO_IMAGE2 :
- if((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start != UNINIT_PTR_IN_CS) &&
- (IsNonCDLessDevice(Adapter) == FALSE))
- SectionPresent = TRUE ;
- break;
- case DSD0 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- case DSD1 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- case DSD2 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- case VSA0 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- case VSA1 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- case VSA2 :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- case SCSI :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- case CONTROL_SECTION :
- if(Adapter->psFlash2xCSInfo->OffsetFromZeroForControlSectionStart != UNINIT_PTR_IN_CS)
- SectionPresent = TRUE ;
- break;
- default :
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section Does not exist in Flash 2.x");
+ case ISO_IMAGE1:
+ if ((Adapter->psFlash2xCSInfo->OffsetISOImage1Part1Start != UNINIT_PTR_IN_CS) &&
+ (IsNonCDLessDevice(Adapter) == FALSE))
+ SectionPresent = TRUE;
+ break;
+ case ISO_IMAGE2:
+ if ((Adapter->psFlash2xCSInfo->OffsetISOImage2Part1Start != UNINIT_PTR_IN_CS) &&
+ (IsNonCDLessDevice(Adapter) == FALSE))
+ SectionPresent = TRUE;
+ break;
+ case DSD0:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSDStart != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ case DSD1:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD1Start != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ case DSD2:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForDSD2Start != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ case VSA0:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSAStart != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ case VSA1:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA1Start != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ case VSA2:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForVSA2Start != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ case SCSI:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForScsiFirmware != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ case CONTROL_SECTION:
+ if (Adapter->psFlash2xCSInfo->OffsetFromZeroForControlSectionStart != UNINIT_PTR_IN_CS)
+ SectionPresent = TRUE;
+ break;
+ default:
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section Does not exist in Flash 2.x");
SectionPresent = FALSE;
}
- return SectionPresent ;
+
+ return SectionPresent;
}
+
INT IsSectionWritable(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL Section)
{
- INT offset = STATUS_FAILURE;
- INT Status = FALSE;
- if(IsSectionExistInFlash(Adapter,Section) == FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section <%d> does not exixt", Section);
- return FALSE;
- }
- offset = BcmGetSectionValStartOffset(Adapter,Section);
- if(offset == INVALID_OFFSET)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section<%d> does not exixt", Section);
- return FALSE;
- }
+ INT offset = STATUS_FAILURE;
+ INT Status = FALSE;
- if(IsSectionExistInVendorInfo(Adapter,Section))
- {
- return !(Adapter->psFlash2xVendorInfo->VendorSection[Section].AccessFlags & FLASH2X_SECTION_RO);
- }
+ if (IsSectionExistInFlash(Adapter, Section) == FALSE)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section <%d> does not exixt", Section);
+ return FALSE;
+ }
+
+ offset = BcmGetSectionValStartOffset(Adapter, Section);
+ if (offset == INVALID_OFFSET)
+ {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section<%d> does not exixt", Section);
+ return FALSE;
+ }
+
+ if (IsSectionExistInVendorInfo(Adapter, Section))
+ {
+ return !(Adapter->psFlash2xVendorInfo->VendorSection[Section].AccessFlags & FLASH2X_SECTION_RO);
+ }
- Status = IsOffsetWritable(Adapter,offset);
- return Status ;
+ Status = IsOffsetWritable(Adapter, offset);
+ return Status;
}
static INT CorruptDSDSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
{
-
PUCHAR pBuff = NULL;
UINT sig = 0;
UINT uiOffset = 0;
UINT uiSectAlignAddr = 0;
Adapter->bSigCorrupted = FALSE;
-
- if(Adapter->bAllDSDWriteAllow == FALSE)
+ if (Adapter->bAllDSDWriteAllow == FALSE)
{
- if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
+ if (IsSectionWritable(Adapter, eFlash2xSectionVal) != TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section is not Writable...Hence can't Corrupt signature");
return SECTOR_IS_NOT_WRITABLE;
}
}
pBuff = (PUCHAR)kzalloc(MAX_RW_SIZE, GFP_KERNEL);
- if(pBuff == NULL)
+ if (pBuff == NULL)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Can't allocate memorey");
- return -ENOMEM ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Can't allocate memorey");
+ return -ENOMEM;
}
uiOffset = Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER);
- uiOffset -= MAX_RW_SIZE ;
-
- BcmFlash2xBulkRead(Adapter, (PUINT)pBuff,eFlash2xSectionVal,uiOffset,MAX_RW_SIZE);
+ uiOffset -= MAX_RW_SIZE;
+ BcmFlash2xBulkRead(Adapter, (PUINT)pBuff, eFlash2xSectionVal, uiOffset, MAX_RW_SIZE);
- sig = *((PUINT)(pBuff +12));
- sig =ntohl(sig);
- BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,pBuff,MAX_RW_SIZE);
- //Now corrupting the sig by corrupting 4th last Byte.
+ sig = *((PUINT)(pBuff + 12));
+ sig = ntohl(sig);
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, pBuff, MAX_RW_SIZE);
+ // Now corrupting the sig by corrupting 4th last Byte.
*(pBuff + 12) = 0;
- if(sig == DSD_IMAGE_MAGIC_NUMBER)
+ if (sig == DSD_IMAGE_MAGIC_NUMBER)
{
Adapter->bSigCorrupted = TRUE;
- if(Adapter->ulFlashWriteSize == BYTE_WRITE_SUPPORT)
+ if (Adapter->ulFlashWriteSize == BYTE_WRITE_SUPPORT)
{
- uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize -1);
- BlockStatus = BcmFlashUnProtectBlock(Adapter,uiSectAlignAddr,Adapter->uiSectorSize);
+ uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
+ BlockStatus = BcmFlashUnProtectBlock(Adapter, uiSectAlignAddr, Adapter->uiSectorSize);
- WriteToFlashWithoutSectorErase(Adapter,(PUINT)(pBuff + 12),eFlash2xSectionVal,
- (uiOffset + 12),BYTE_WRITE_SUPPORT);
- if(BlockStatus)
+ WriteToFlashWithoutSectorErase(Adapter, (PUINT)(pBuff + 12), eFlash2xSectionVal,
+ (uiOffset + 12), BYTE_WRITE_SUPPORT);
+ if (BlockStatus)
{
- BcmRestoreBlockProtectStatus(Adapter,BlockStatus);
+ BcmRestoreBlockProtectStatus(Adapter, BlockStatus);
BlockStatus = 0;
}
}
else
{
- WriteToFlashWithoutSectorErase(Adapter,(PUINT)pBuff,eFlash2xSectionVal,
- uiOffset ,MAX_RW_SIZE);
+ WriteToFlashWithoutSectorErase(Adapter, (PUINT)pBuff, eFlash2xSectionVal,
+ uiOffset, MAX_RW_SIZE);
}
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"BCM Signature is not present in header");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "BCM Signature is not present in header");
kfree(pBuff);
+
return STATUS_FAILURE;
}
kfree(pBuff);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Corrupted the signature");
- return STATUS_SUCCESS ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Corrupted the signature");
+
+ return STATUS_SUCCESS;
}
static INT CorruptISOSig(struct bcm_mini_adapter *Adapter, FLASH2X_SECTION_VAL eFlash2xSectionVal)
{
-
PUCHAR pBuff = NULL;
UINT sig = 0;
UINT uiOffset = 0;
Adapter->bSigCorrupted = FALSE;
- if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
+ if (IsSectionWritable(Adapter, eFlash2xSectionVal) != TRUE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Section is not Writable...Hence can't Corrupt signature");
return SECTOR_IS_NOT_WRITABLE;
}
pBuff = (PUCHAR)kzalloc(MAX_RW_SIZE, GFP_KERNEL);
- if(pBuff == NULL)
+ if (pBuff == NULL)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allocate memorey");
- return -ENOMEM ;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Can't allocate memorey");
+ return -ENOMEM;
}
uiOffset = 0;
- BcmFlash2xBulkRead(Adapter, (PUINT)pBuff,eFlash2xSectionVal,uiOffset, MAX_RW_SIZE);
+ BcmFlash2xBulkRead(Adapter, (PUINT)pBuff, eFlash2xSectionVal, uiOffset, MAX_RW_SIZE);
sig = *((PUINT)pBuff);
- sig =ntohl(sig);
+ sig = ntohl(sig);
- //corrupt signature
+ // corrupt signature
*pBuff = 0;
- if(sig == ISO_IMAGE_MAGIC_NUMBER)
+ if (sig == ISO_IMAGE_MAGIC_NUMBER)
{
Adapter->bSigCorrupted = TRUE;
- WriteToFlashWithoutSectorErase(Adapter,(PUINT)pBuff,eFlash2xSectionVal,
- uiOffset ,Adapter->ulFlashWriteSize);
+ WriteToFlashWithoutSectorErase(Adapter, (PUINT)pBuff, eFlash2xSectionVal,
+ uiOffset, Adapter->ulFlashWriteSize);
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"BCM Signature is not present in header");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "BCM Signature is not present in header");
kfree(pBuff);
+
return STATUS_FAILURE;
}
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Corrupted the signature");
- BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,pBuff,MAX_RW_SIZE);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Corrupted the signature");
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, pBuff, MAX_RW_SIZE);
kfree(pBuff);
- return STATUS_SUCCESS ;
+ return STATUS_SUCCESS;
}
BOOLEAN IsNonCDLessDevice(struct bcm_mini_adapter *Adapter)
{
- if(Adapter->psFlash2xCSInfo->IsCDLessDeviceBootSig == NON_CDLESS_DEVICE_BOOT_SIG)
+ if (Adapter->psFlash2xCSInfo->IsCDLessDeviceBootSig == NON_CDLESS_DEVICE_BOOT_SIG)
return TRUE;
else
- return FALSE ;
+ return FALSE;
}
-
projects / openwrt / staging / blogic.git / commitdiff