ipq806x: rt4230w-rev6: fix status reporting via the LEDs

There is a custom LED controller between the 3 SoC GPIO outputs and
the red and blue LEDs of the device. It implements a strange mapping
that includes fixed, flashing, and breathing modes.

The current DTS configuration causes OpenWrt to flash the LEDs over
the controller's own flashing, resulting in chaotic output in boot,
failsafe, and upgrade modes.

This change fixes the LEDs in the best way possible as long as each
OpenWrt running state is limited to be signaled by a single led.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15440
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 0868268c9fd4397411e9629eedda35b1547e798e)

diff --git a/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
index 8d9601b63247289bcfce3108db7a7d442468ed24..77bb7a5cd55ab0dbe976f6a53f2dff04457978ec 100644 (file)
--- a/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
+++ b/target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
@@ -13,10 +13,10 @@
        };
 
        aliases {
-               led-boot = &ledctrl3;
+               led-boot = &ledctrl1;
                led-failsafe = &ledctrl1;
-               led-running = &ledctrl2;
-               led-upgrade = &ledctrl3;
+               led-running = &ledctrl3;
+               led-upgrade = &ledctrl1;
        };
 
        chosen {
@@ -54,6 +54,7 @@
                ledctrl2: ledctrl2 {
                        label = "ledctrl2";
                        gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "default-on";
                };
 
                ledctrl3: ledctrl3 {