usb: host: ehci-vf: Migrate Vybrid USB to driver model

Add driver model support for Vybrid USB driver.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
index 61789dddc36635f59469ece6fbc34b1518cfe294..f6f9efb6cdaf890a00a8a04574547f4a7223bb66 100644 (file)
--- a/drivers/usb/host/ehci-vf.c
+++ b/drivers/usb/host/ehci-vf.c
@@ -8,16 +8,20 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <usb.h>
 #include <errno.h>
 #include <linux/compiler.h>
 #include <asm/io.h>
+#include <asm-generic/gpio.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/regs-usbphy.h>
 #include <usb/ehci-ci.h>
+#include <libfdt.h>
+#include <fdtdec.h>
 
 #include "ehci.h"
 
@@ -32,6 +36,8 @@
 #define UCMD_RUN_STOP          (1 << 0) /* controller run/stop */
 #define UCMD_RESET                     (1 << 1) /* controller reset */
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static const unsigned phy_bases[] = {
        USB_PHY0_BASE_ADDR,
        USB_PHY1_BASE_ADDR,
@@ -131,24 +137,39 @@ int __weak board_ehci_hcd_init(int port)
        return 0;
 }
 
+int ehci_vf_common_init(struct usb_ehci *ehci, int index)
+{
+       int ret;
+
+       /* Do board specific initialisation */
+       ret = board_ehci_hcd_init(index);
+       if (ret)
+               return ret;
+
+       usb_power_config(index);
+       usb_oc_config(index);
+       usb_internal_phy_clock_gate(index);
+       usb_phy_enable(index, ehci);
+
+       return 0;
+}
+
+#ifndef CONFIG_DM_USB
 int ehci_hcd_init(int index, enum usb_init_type init,
                struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
        struct usb_ehci *ehci;
        enum usb_init_type type;
+       int ret;
 
        if (index >= ARRAY_SIZE(nc_reg_bases))
                return -EINVAL;
 
        ehci = (struct usb_ehci *)nc_reg_bases[index];
 
-       /* Do board specific initialisation */
-       board_ehci_hcd_init(index);
-
-       usb_power_config(index);
-       usb_oc_config(index);
-       usb_internal_phy_clock_gate(index);
-       usb_phy_enable(index, ehci);
+       ret = ehci_vf_common_init(index);
+       if (ret)
+               return ret;
 
        *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
        *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
@@ -175,3 +196,176 @@ int ehci_hcd_stop(int index)
 {
        return 0;
 }
+#else
+/* Possible port types (dual role mode) */
+enum dr_mode {
+       DR_MODE_NONE = 0,
+       DR_MODE_HOST,           /* supports host operation */
+       DR_MODE_DEVICE,         /* supports device operation */
+       DR_MODE_OTG,            /* supports both */
+};
+
+struct ehci_vf_priv_data {
+       struct ehci_ctrl ctrl;
+       struct usb_ehci *ehci;
+       struct gpio_desc cdet_gpio;
+       enum usb_init_type init_type;
+       enum dr_mode dr_mode;
+       u32 portnr;
+};
+
+static int vf_usb_ofdata_to_platdata(struct udevice *dev)
+{
+       struct ehci_vf_priv_data *priv = dev_get_priv(dev);
+       const void *dt_blob = gd->fdt_blob;
+       int node = dev->of_offset;
+       const char *mode;
+
+       priv->portnr = dev->seq;
+
+       priv->ehci = (struct usb_ehci *)dev_get_addr(dev);
+       mode = fdt_getprop(dt_blob, node, "dr_mode", NULL);
+       if (mode) {
+               if (0 == strcmp(mode, "host")) {
+                       priv->dr_mode = DR_MODE_HOST;
+                       priv->init_type = USB_INIT_HOST;
+               } else if (0 == strcmp(mode, "peripheral")) {
+                       priv->dr_mode = DR_MODE_DEVICE;
+                       priv->init_type = USB_INIT_DEVICE;
+               } else if (0 == strcmp(mode, "otg")) {
+                       priv->dr_mode = DR_MODE_OTG;
+                       /*
+                        * We set init_type to device by default when OTG
+                        * mode is requested. If a valid gpio is provided
+                        * we will switch the init_type based on the state
+                        * of the gpio pin.
+                        */
+                       priv->init_type = USB_INIT_DEVICE;
+               } else {
+                       debug("%s: Cannot decode dr_mode '%s'\n",
+                             __func__, mode);
+                       return -EINVAL;
+               }
+       } else {
+               priv->dr_mode = DR_MODE_HOST;
+               priv->init_type = USB_INIT_HOST;
+       }
+
+       if (priv->dr_mode == DR_MODE_OTG) {
+               gpio_request_by_name_nodev(dt_blob, node, "fsl,cdet-gpio", 0,
+                                          &priv->cdet_gpio, GPIOD_IS_IN);
+               if (dm_gpio_is_valid(&priv->cdet_gpio)) {
+                       if (dm_gpio_get_value(&priv->cdet_gpio))
+                               priv->init_type = USB_INIT_DEVICE;
+                       else
+                               priv->init_type = USB_INIT_HOST;
+               }
+       }
+
+       return 0;
+}
+
+static int vf_init_after_reset(struct ehci_ctrl *dev)
+{
+       struct ehci_vf_priv_data *priv = dev->priv;
+       enum usb_init_type type = priv->init_type;
+       struct usb_ehci *ehci = priv->ehci;
+       int ret;
+
+       ret = ehci_vf_common_init(priv->ehci, priv->portnr);
+       if (ret)
+               return ret;
+
+       if (type == USB_INIT_DEVICE)
+               return 0;
+
+       setbits_le32(&ehci->usbmode, CM_HOST);
+       writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
+       setbits_le32(&ehci->portsc, USB_EN);
+
+       mdelay(10);
+
+       return 0;
+}
+
+static const struct ehci_ops vf_ehci_ops = {
+       .init_after_reset = vf_init_after_reset
+};
+
+static int vf_usb_bind(struct udevice *dev)
+{
+       static int num_controllers;
+
+       /*
+        * Without this hack, if we return ENODEV for USB Controller 0, on
+        * probe for the next controller, USB Controller 1 will be given a
+        * sequence number of 0. This conflicts with our requirement of
+        * sequence numbers while initialising the peripherals.
+        */
+       dev->req_seq = num_controllers;
+       num_controllers++;
+
+       return 0;
+}
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+       struct usb_platdata *plat = dev_get_platdata(dev);
+       struct ehci_vf_priv_data *priv = dev_get_priv(dev);
+       struct usb_ehci *ehci = priv->ehci;
+       struct ehci_hccr *hccr;
+       struct ehci_hcor *hcor;
+       int ret;
+
+       ret = ehci_vf_common_init(ehci, priv->portnr);
+       if (ret)
+               return ret;
+
+       if (priv->init_type != plat->init_type)
+               return -ENODEV;
+
+       if (priv->init_type == USB_INIT_HOST) {
+               setbits_le32(&ehci->usbmode, CM_HOST);
+               writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
+               setbits_le32(&ehci->portsc, USB_EN);
+       }
+
+       mdelay(10);
+
+       hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+       hcor = (struct ehci_hcor *)((uint32_t)hccr +
+                               HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+       return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, priv->init_type);
+}
+
+static int ehci_usb_remove(struct udevice *dev)
+{
+       int ret;
+
+       ret = ehci_deregister(dev);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+static const struct udevice_id vf_usb_ids[] = {
+       { .compatible = "fsl,vf610-usb" },
+       { }
+};
+
+U_BOOT_DRIVER(usb_ehci) = {
+       .name = "ehci_vf",
+       .id = UCLASS_USB,
+       .of_match = vf_usb_ids,
+       .bind = vf_usb_bind,
+       .probe = ehci_usb_probe,
+       .remove = ehci_usb_remove,
+       .ops = &ehci_usb_ops,
+       .ofdata_to_platdata = vf_usb_ofdata_to_platdata,
+       .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+       .priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data),
+       .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif