{ debug "# missing interface '$1' ignored"; false; }
)
+do_ifup() {
+ if_proto=$(nvram get ${2}_proto)
+ if=$(nvram get ${2}_ifname)
+ [ "${if%%[0-9]}" = "ppp" ] && if=$(nvram get ${if_proto}_ifname)
+
+ pidfile=/var/run/${if}.pid
+ [ -f $pidfile ] && $DEBUG kill $(cat $pidfile)
+
+ case "$1" in
+ static)
+ ip=$(nvram get ${2}_ipaddr)
+ netmask=$(nvram get ${2}_netmask)
+ gateway=$(nvram get ${2}_gateway)
+
+ $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} broadcast + up
+ ${gateway:+$DEBUG route add default gw $gateway}
+
+ [ -f /etc/resolv.conf ] && return
+
+ debug "# --- creating /etc/resolv.conf ---"
+ for dns in $(nvram get ${2}_dns); do
+ echo "nameserver $dns" >> /etc/resolv.conf
+ done
+ ;;
+ dhcp)
+ DHCP_IP=$(nvram get ${2}_ipaddr)
+ DHCP_NETMASK=$(nvram get ${2}_netmask)
+ $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} broadcast + up
+
+ DHCP_ARGS="-i $if ${DHCP_IP:+-r $DHCP_IP} -b -p $pidfile"
+ DHCP_HOSTNAME=$(nvram get ${2}_hostname)
+ DHCP_HOSTNAME=${DHCP_HOSTNAME%%.*}
+ [ -z $DHCP_HOSTNAME ] || DHCP_ARGS="$DHCP_ARGS -H $DHCP_HOSTNAME"
+ [ "$if_proto" = "pptp" ] && DHCP_ARGS="$DHCP_ARGS -n -q" || DHCP_ARGS="$DHCP_ARGS -R &"
+ oldpid=$(cat $pidfile)
+ ${DEBUG:-eval} "udhcpc $DHCP_ARGS"
+ pidof udhcpc | grep "$oldpid" >&- 2>&- && {
+ sleep 1
+ kill -9 $oldpid
+ }
+ ;;
+ none|"")
+ ;;
+ *)
+ [ -x "/sbin/ifup.$1" ] && { $DEBUG /sbin/ifup.$1 ${2}; exit; }
+ echo "### ifup ${2}: ignored ${2}_proto=\"$1\" (not supported)"
+ ;;
+ esac
+}
+
bitcount () {
local c=$1
echo $((
touch /var/log/wtmp
touch /var/log/lastlog
-[ -x /usr/sbin/nvram ] && {
- [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
- # if default wifi mac, set two higher than the lan mac
- nvram set il0macaddr=$(nvram get et0macaddr|
- awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
- }
-
- # set up the vlan*ports variables for the asus wl-500g deluxe
- # if they don't already exist
- [ "$(nvram get boardtype)" = "bcm95365r" \
- -a "$(nvram get boardnum)" = "45" \
- -a -z "$(nvram get vlan0ports)" \
- -a -z "$(nvram get vlan1ports)" ] && {
- nvram set vlan0ports="1 2 3 4 5*"
- nvram set vlan1ports="0 5"
- }
-}
-
sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
ifconfig lo 127.0.0.1 up
ifconfig eth0 promisc
-[ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && {
+[ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && { # FIXME: replace when the new switch driver is integrated...
robocfg switch disable vlans enable reset vlan 0 ports "0 1 2 3 5t" vlan 1 ports "4 5t" port 4 state enabled stp none switch enable
robocfg show
}
arp() { cat /proc/net/arp; }
ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
+reboot() { ifdown wan 2>&1 >/dev/null ; /sbin/reboot; }
type=$1
debug "### ifdown $type ###"
if=$(nvram get ${type}_ifname)
-if_valid $if || exit
-$DEBUG ifconfig $if down
+proto=$(nvram get ${type}_proto)
+if_valid $if && $DEBUG ifconfig $if down
kill $(cat /var/run/${if}.pid 2>&-) 2>&-
+[ "$if" = "ppp0" ] && killall pppd
+killall ifup.$proto >&- 2>&-
#!/bin/ash
[ $# = 0 ] && { echo " $0 <group>"; exit; }
+
. /etc/functions.sh
. /etc/network.overrides
[ "$FAILSAFE" != "true" -a -e /etc/config/network ] && . /etc/config/network
debug "### ifup $type ###"
if_proto=$(nvram get ${type}_proto)
-[ "${if_proto}" = "pppoa" ] || {
- if=$(nvram get ${type}_ifname)
- [ "${if%%[0-9]}" = "ppp" ] && if=$(nvram get ${if_proto}_ifname)
-
- if_valid $if || exit
- mac=$(nvram get ${type}_hwaddr)
- $DEBUG ifconfig $if down 2>&-
-
- pidfile=/var/run/${if}.pid
- [ -f $pidfile ] && $DEBUG kill $(cat $pidfile)
-
- if [ "${if%%[0-9]}" = "br" ]; then
- stp=$(nvram get ${type}_stp)
- $DEBUG brctl delbr $if 2>&-
- $DEBUG brctl addbr $if
- $DEBUG brctl setfd $if 0
- $DEBUG brctl stp $if ${stp:-0}
-
- for sif in $(nvram get ${type}_ifnames); do
- if_valid $sif || continue
- ${mac:+$DEBUG ifconfig $sif down hw ether $mac}
- $DEBUG ifconfig $sif 0.0.0.0 up
- $DEBUG brctl addif $if $sif
- done
- else
- ${mac:+$DEBUG ifconfig $if down hw ether $mac}
- fi
-}
-
-case "$if_proto" in
- static)
- ip=$(nvram get ${type}_ipaddr)
- netmask=$(nvram get ${type}_netmask)
- gateway=$(nvram get ${type}_gateway)
-
- $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} broadcast + up
- ${gateway:+$DEBUG route add default gw $gateway}
-
- [ -f /etc/resolv.conf ] && return
-
- debug "# --- creating /etc/resolv.conf ---"
- for dns in $(nvram get ${type}_dns); do
- echo "nameserver $dns" >> /etc/resolv.conf
- done
- ;;
- dhcp)
- ip=$(nvram get ${type}_ipaddr)
- ${DEBUG:-eval} "udhcpc -R -i $if ${ip:+-r $ip} -b -p $pidfile &"
- ;;
- none|"")
- ;;
- *)
- [ -x "/sbin/ifup.${if_proto}" ] && { $DEBUG /sbin/ifup.${if_proto} $*; exit; }
- echo "### ifup $type: ignored ${type}_proto=\"$if_proto\" (not supported)"
- ;;
-esac
+if=$(nvram get ${type}_ifname)
+[ "${if%%[0-9]}" = "ppp" ] && if=$(nvram get ${if_proto}_ifname)
+
+if_valid $if || [ "$if_proto" = "pptp" ] || exit
+mac=$(nvram get ${type}_hwaddr)
+$DEBUG ifconfig $if down 2>&-
+
+if [ "${if%%[0-9]}" = "br" ]; then
+ stp=$(nvram get ${type}_stp)
+ $DEBUG brctl delbr $if 2>&-
+ $DEBUG brctl addbr $if
+ $DEBUG brctl setfd $if 0
+ $DEBUG brctl stp $if ${stp:-0}
+
+ for sif in $(nvram get ${type}_ifnames); do
+ if_valid $sif || continue
+ ${mac:+$DEBUG ifconfig $sif down hw ether $mac}
+ $DEBUG ifconfig $sif 0.0.0.0 up
+ $DEBUG brctl addif $if $sif
+ done
+else
+ ${mac:+$DEBUG ifconfig $if down hw ether $mac}
+fi
+
+do_ifup $if_proto $type