--- /dev/null
+#!/bin/sh
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ls1043v)
+ ucidef_set_led_netdev "wan" "WAN LED" "ls1043v:yellow:wan" "eth4"
+ ;;
+traverse,ls1043s)
+ ucidef_set_led_netdev "wan" "WAN LED" "ls1043s:yellow:wan" "eth4"
+ ucidef_set_led_netdev "xgact" "10G Activity" "ls1043s:yellow:10gact" "eth6"
+ ucidef_set_led_netdev "xglink" "10G Link" "ls1043s:green:10glink" "eth6"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ traverse,ls1043v)
+ ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+ ucidef_set_interface_wan "eth4"
+ ;;
+ traverse,ls1043s)
+ ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth6"
+ ucidef_set_interface_wan "eth4"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ls1043v)
+ ucidef_add_gpio_switch "lte_reset" "LTE Reset" "377"
+ ucidef_add_gpio_switch "lte_disable" "LTE Airplane mode" "378"
+ ;;
+traverse,ls1043s)
+ ucidef_add_gpio_switch "tensfp_txdisable" "SFP+ TX Disable" "378"
+ ucidef_add_gpio_switch "gigsfp_txdisable" "SFP TX Disable" "381"
+ ucidef_add_gpio_switch "lte_reset" "LTE Reset" "502"
+ ucidef_add_gpio_switch "lte_disable" "LTE Airplane Mode" "394"
+ ucidef_add_gpio_switch "lte_power" "LTE Power" "395"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+reorder_layerscape_interfaces() {
+ if [ ! -f /tmp/sysinfo/board_name ]; then
+ echo "No board name found, not doing reorder_layerscape_interfaces"
+ return 0
+ fi
+
+ board=$(cat /tmp/sysinfo/board_name)
+ case "$board" in
+ "traverse,ls1043v" | \
+ "traverse,ls1043s")
+
+ # Reorder ethernet interfaces to match the physical order
+ ip link set eth2 name fm1-mac3
+ ip link set eth4 name eth2
+ ip link set eth3 name fm1-mac4
+ ip link set eth5 name eth3
+ ip link set fm1-mac3 name eth4
+ ip link set fm1-mac4 name eth5
+ ;;
+ default)
+ echo "Unknown board $board"
+ ;;
+ esac
+}
+
+boot_hook_add preinit_main reorder_layerscape_interfaces
--- /dev/null
+#!/bin/sh
+#
+# Copyright 2015-2018 Traverse Technologies
+#
+platform_do_upgrade_traverse_nandubi() {
+ bootsys=$(fw_printenv bootsys | awk -F= '{{print $2}}')
+ newbootsys=2
+ if [ "$bootsys" -eq "2" ]; then
+ newbootsys=1
+ fi
+ mkdir -p /tmp/image
+ cd /tmp/image
+ get_image "$1" > image.tar
+ ls -la image.tar
+ files=$(tar -tf image.tar)
+ echo "Files in image:"
+ echo $files
+ for f in $files
+ do
+ part_name=$(echo $f | awk -F '/' '{{print $2}}')
+ if [ -z "$part_name" ] || [ "$part_name" = "CONTROL" ]; then
+ continue
+ fi
+
+ [ "$part_name" = "root" ] && part_name="rootfs"
+
+ volume=$part_name
+ if [ "$part_name" = "kernel" ] || [ "$part_name" = "rootfs" ]; then
+ volume="${part_name}${newbootsys}"
+ fi
+ volume_id=$(ubinfo -d 0 --name $volume | awk '/Volume ID/ {print $3}')
+ file_size=$(tar -tvf image.tar $f | awk '{{print $3}}')
+ echo "$f size $file_size"
+ tar -xOf image.tar $f | ubiupdatevol -s $file_size /dev/ubi0_$volume_id -
+
+ echo "$volume upgraded"
+ done
+ fw_setenv bootsys $newbootsys
+ echo "Upgrade complete"
+}
+platform_copy_config() {
+ bootsys=$(fw_printenv bootsys | awk -F= '{{print $2}}')
+ rootvol=rootfs$bootsys
+ volume_id=$(ubinfo -d 0 --name $rootvol | awk '/Volume ID/ {print $3}')
+ mkdir -p /mnt/oldsys
+ mount -t ubifs -o rw,noatime /dev/ubi0_$volume_id /mnt/oldsys
+ cp -af "$CONF_TAR" /mnt/oldsys
+ umount /mnt/oldsys
+}
+platform_check_image() {
+ local board=$(board_name)
+
+ case "$board" in
+ traverse,ls1043v | \
+ traverse,ls1043s | \
+ traverse,five64)
+ local tar_file="$1"
+ local kernel_length=$( (tar xf $tar_file sysupgrade-traverse-five64/kernel -O | wc -c) 2> /dev/null)
+ local rootfs_length=$( (tar xf $tar_file sysupgrade-traverse-five64/root -O | wc -c) 2> /dev/null)
+ [ "$kernel_length" -eq 0 -o "$rootfs_length" -eq 0 ] && {
+ echo "The upgrade image is corrupt."
+ return 1
+ }
+ return 0
+ ;;
+ *)
+ echo "Sysupgrade is not currently supported on $board"
+ ;;
+ esac
+
+ return 1
+}
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ traverse,ls1043v | \
+ traverse,ls1043s | \
+ traverse,five64)
+ platform_do_upgrade_traverse_nandubi "$ARGV"
+ ;;
+ *)
+ echo "Sysupgrade is not currently supported on $board"
+ ;;
+ esac
+}
+platform_pre_upgrade() {
+ # Force the creation of fw_printenv.lock
+ mkdir -p /var/lock
+ touch /var/lock/fw_printenv.lock
+
+ export RAMFS_COPY_BIN="/usr/sbin/fw_printenv /usr/sbin/fw_setenv /usr/sbin/ubinfo /bin/echo ${RAMFS_COPY_BIN}"
+ export RAMFS_COPY_DATA="/etc/fw_env.config /var/lock/fw_printenv.lock ${RAMFS_COPY_DATA}"
+}
--- /dev/null
+/*
+ * Device Tree Include file for Traverse LS1043S board.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2017-2018, Traverse Technologies
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Traverse LS1043S";
+ compatible = "traverse,ls1043s";
+
+ aliases {
+ crypto = &crypto;
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ ethernet4 = &EMAC4;
+ ethernet5 = &EMAC5;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ gpio0 {
+ label = "ls1043s:green:user0";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ };
+ gpio1 {
+ label = "ls1043s:green:user1";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ };
+ /* LED D17 */
+ gpio2 {
+ label = "ls1043s:green:wan";
+ gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ };
+ gpio3 {
+ label = "ls1043s:yellow:wan";
+ gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ };
+ /* LED D18 */
+ gpio4 {
+ label = "ls1043s:green:mgmt";
+ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ };
+ gpio5 {
+ label = "ls1043s:yellow:mgmt";
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ };
+ /* LED D6 */
+ gpio6 {
+ label = "ls1043s:green:user2";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SFP+ LEDs - these are for chassis
+ * with lightpipes only
+ */
+ teng_act {
+ label = "ls1043s:yellow:10gact";
+ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ };
+
+ teng_link {
+ label = "ls1043s:green:10glink";
+ gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+ /* This button may not be loaded on all boards */
+ button@0 {
+ label = "Front button";
+ linux,code = <KEY_SETUP>;
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ };
+ /* This is wired to header S3 */
+ button@1 {
+ label = "Rear button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&esdhc {
+ mmc-hs200-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+};
+
+&i2c0 {
+ status = "okay";
+ rtc@6f {
+ compatible = "intersil,isl1208";
+ reg = <0x6f>;
+ };
+
+ sfp_pca9534: pca9534@24 {
+ compatible = "ti,tca9534", "nxp,pca9534";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x24>;
+ gpio-base = <100>;
+ };
+
+ controller@50 {
+ compatible = "traverse,controller";
+ reg = <0x50>;
+ };
+
+ ds125df111@18 {
+ compatible = "ti,ds125df111";
+ reg = <0x18>;
+ };
+
+ emc1704@4c {
+ compatible = "microchip,emc1704";
+ reg = <0x4c>;
+ };
+
+ pac1934@16 {
+ compatible = "microchip,pac1934";
+ reg = <0x16>;
+ /* Monitoring 3.3V, 5V, Vin/12V (voltage only), Vbat/RTC (voltage only) */
+ shunt-resistors = <4000 12000 0 0>;
+ };
+
+ pmic@8 {
+ compatible = "freescale,mc34vr500";
+ reg = <0x08>;
+ };
+};
+
+/* I2C Bus for SFP EEPROM and control
+ * These are multiplexed so
+ * they don't collide when loaded
+ */
+&i2c3 {
+ status = "okay";
+ i2c-switch@70 {
+ compatible = "nxp,pca9540";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ gigsfp_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ tensfp_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* Only NAND flash is used on this board */
+ ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+
+ nand@1,0 {
+ compatible = "fsl,ifc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x10000>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ EMAC0: ethernet@e0000 {
+ phy-handle = <&qsgmii_phy1>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 01];
+ };
+
+ EMAC1: ethernet@e2000 {
+ phy-handle = <&qsgmii_phy2>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 02];
+ };
+
+ EMAC2: ethernet@e8000 {
+ phy-handle = <&qsgmii_phy3>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 03];
+ };
+
+ EMAC3: ethernet@ea000 {
+ phy-handle = <&qsgmii_phy4>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 04];
+ };
+
+ /* SFP via AR8031
+ * We treat this as a fixed-link as the
+ * AR8031 is hard-configured into
+ * 1000BASE-X mode
+ * Should MII control be desired, remove
+ * fixed-link and add
+ * phy-handle = <&rgmii_phy1>;
+ */
+ EMAC4: ethernet@e4000 {
+ phy-connection-type = "rgmii";
+ local-mac-address = [0A 00 00 00 00 05];
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ /* Connection to Expansion (M.2) slot
+ * Future WAN (i.e xDSL) plugin
+ */
+ EMAC5: ethernet@e6000 {
+ phy-connection-type = "rgmii-id";
+ local-mac-address = [00 00 00 00 00 06];
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ /* 10G SFP+ interface
+ * This can also run at 1.25 and 2.5G with
+ * the appropriate SerDes protocol setting in RCW
+ */
+ TENSFP: ethernet@f0000 {
+ status = "okay";
+ phy-connection-type = "xgmii";
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ qsgmii_phy1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ qsgmii_phy2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ qsgmii_phy3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+ qsgmii_phy4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+ };
+};
+
+/* No QUICC engine functions on this board -
+ * pins are used for other functions (GPIO, I2C etc.)
+ */
+&uqe {
+ status = "disabled";
+};
+
+/* LS1043S does not use the QorIQ AHCI
+ * controller.
+ */
+&sata {
+ status = "disabled";
+};
--- /dev/null
+/*
+ * Device Tree Include file for Traverse LS1043V board.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2017, Traverse Technologies
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Traverse LS1043V";
+ compatible = "traverse,ls1043v";
+
+ aliases {
+ crypto = &crypto;
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ ethernet4 = &EMAC4;
+ ethernet5 = &EMAC5;
+ pca9555 = &pca9555;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ gpio0 {
+ label = "ls1043v:green:user0";
+ gpios = <&pca9555 0 GPIO_ACTIVE_LOW>;
+ };
+ gpio1 {
+ label = "ls1043v:yellow:user0";
+ gpios = <&pca9555 1 GPIO_ACTIVE_LOW>;
+ };
+ gpio2 {
+ label = "ls1043v:green:user1";
+ gpios = <&pca9555 2 GPIO_ACTIVE_LOW>;
+ };
+ gpio3 {
+ label = "ls1043v:yellow:user1";
+ gpios = <&pca9555 3 GPIO_ACTIVE_LOW>;
+ };
+ gpio4 {
+ label = "ls1043v:green:user2";
+ gpios = <&pca9555 4 GPIO_ACTIVE_HIGH>;
+ };
+ gpio5 {
+ label = "ls1043v:yellow:wlan";
+ gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
+ };
+ gpio6 {
+ label = "ls1043v:yellow:wan";
+ gpios = <&pca9555 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+ button@0 {
+ label = "Front button";
+ linux,code = <KEY_SETUP>;
+ gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+ };
+ button@1 {
+ label = "Rear button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ rtc@6f {
+ compatible = "intersil,isl1208";
+ reg = <0x6f>;
+ };
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ gpio-base = <0>;
+ };
+
+ /* CPU core temp sensor and VDD (1.0V) sensor */
+ ltc2990@4c {
+ compatible = "lltc,ltc2990";
+ reg = <0x4C>;
+ lltc,meas-mode = <4 3>;
+ };
+
+ /* 3.3V and 5V monitor (may not be loaded on some SKUs) */
+ ltc2990@4f {
+ compatible = "lltc,ltc2990";
+ reg = <0x4F>;
+ lltc,meas-mode = <6 3>;
+ };
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* Only NAND flash is used on this board */
+ ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+
+ nand@1,0 {
+ compatible = "fsl,ifc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x10000>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ EMAC0: ethernet@e0000 {
+ phy-handle = <&qsgmii_phy1>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 01];
+ };
+
+ EMAC1: ethernet@e2000 {
+ phy-handle = <&qsgmii_phy2>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 02];
+ };
+
+ EMAC2: ethernet@e8000 {
+ phy-handle = <&qsgmii_phy3>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 03];
+ };
+
+ EMAC3: ethernet@ea000 {
+ phy-handle = <&qsgmii_phy4>;
+ phy-connection-type = "qsgmii";
+ local-mac-address = [0A 00 00 00 00 04];
+ };
+ EMAC4: ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ local-mac-address = [0A 00 00 00 00 05];
+ };
+
+ /* Connection to VDSL SoC */
+ EMAC5: ethernet@e6000 {
+ phy-connection-type = "rgmii-id";
+ local-mac-address = [00 00 00 00 00 06];
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ /* 10G XFI interface - not in use on this platform */
+ TENSFP: ethernet@f0000 {
+ status = "disabled";
+
+ phy-connection-type = "sgmii";
+ fixed-link {
+ /* NB: speed = 1000 and sgmii allows forward compatibility
+ * with both 1G and 10G, the same is not true
+ * in the reverse.
+ */
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ qsgmii_phy1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ qsgmii_phy2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ qsgmii_phy3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+ qsgmii_phy4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+ };
+};
+
+/* No QUICC engine functions on this board */
+&uqe {
+ status = "disabled";
+};
+
+/* No SATA/AHCI on this board */
+&sata {
+ status = "disabled";
+};
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
+ITB_BOARDS = traverse-five64
+
define Build/append-ls-rcw
rm -f $@
dd if=$(STAGING_DIR_IMAGE)/$(1)-rcw.bin >> $@
dd if=$(DTS_DIR)/$(1).dtb >> $@
endef
+define Build/traverse-fit
+ ./mkits-multiple-config.sh -o $@.its -A $(LINUX_KARCH) -v $(LINUX_VERSION) \
+ -k $@ -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+ -C gzip -c 1 -c 2 \
+ -d $(DEVICE_DTS_DIR)/freescale/traverse-ls1043s.dtb -D "Traverse_LS1043S" -n "ls1043s" -a $(FDT_LOADADDR) -c 1 \
+ -d $(DEVICE_DTS_DIR)/freescale/traverse-ls1043v.dtb -D "Traverse_LS1043V" -n "ls1043v" -a $(FDT_LOADADDR) -c 2
+ PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+ @mv -f $@.new $@
+endef
+
define Device/Default
PROFILES = Default
FILESYSTEMS := squashfs
KERNEL_LOADADDR = 0x80008000
KERNEL_ENTRY_POINT = 0x80008000
endif
+ FDT_LOADADDR = 0x90000000
endef
define Device/ls1043ardb
TARGET_DEVICES += ls2088ardb
endif
+define Device/traverse-five64
+ KERNEL_NAME := Image
+ KERNEL_SUFFIX := -kernel.itb
+ KERNEL_INSTALL := 1
+ FILESYSTEMS := ubifs
+ DEVICE_TITLE := Traverse LS1043 Boards (Five64, LS1043S)
+ DEVICE_PACKAGES += fman-layerscape-ls1043ardb kmod-i2c-core kmod-rtc-isl1208 uboot-envtools \
+ uboot-traverse-ls1043v uboot-traverse-ls1043v-sdcard \
+ kmod-hwmon-core kmod-hwmon-ltc2990 kmod-gpio-pca953x kmod-input-gpio-keys-polled \
+ kmod-i2c-mux-pca954x kmod-hwmon-pac1934 kmod-hwmon-emc17xx
+ DEVICE_DESCRIPTION = Build images for Traverse LS1043 boards. This generates a single image \
+ capable of booting on any of the boards in this family.
+ DEVICE_DTS = freescale/traverse-ls1043s
+ DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
+ DEVICE_DTS_CONFIG = ls1043s
+ KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
+ KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
+ IMAGES = root sysupgrade.tar
+ IMAGE/root = append-rootfs
+ IMAGE/sysupgrade.tar = sysupgrade-tar
+ UBIFS_OPTS := -m 2048 -e 124KiB -c 4096
+endef
+TARGET_DEVICES += traverse-five64
+
$(eval $(call BuildImage))
--- /dev/null
+From c0612164b379ebc8964da6bc6f6ced9736dce488 Mon Sep 17 00:00:00 2001
+From: Mathew McBride <matt@traverse.com.au>
+Date: Tue, 17 Apr 2018 10:01:03 +1000
+Subject: [PATCH] add DTS for Traverse LS1043 Boards
+
+Signed-off-by: Mathew McBride <matt@traverse.com.au>
+---
+ arch/arm64/boot/dts/freescale/Makefile | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm64/boot/dts/freescale/traverse-ls1043v.dts
+
+--- a/arch/arm64/boot/dts/freescale/Makefile
++++ b/arch/arm64/boot/dts/freescale/Makefile
+@@ -20,7 +20,10 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+-
++
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043v.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043s.dtb
++
+ always := $(dtb-y)
+ subdir-y := $(dts-dirs)
+ clean-files := *.dtb
+--- a/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts
++++ b/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts
+@@ -337,3 +337,29 @@
+ &sata {
+ status = "disabled";
+ };
++
++/* Additions for Layerscape SDK (4.4/4.9) Kernel only
++ * These kernels need additional setup for FMan/QMan DMA shared memory
++ */
++
++&bman_fbpr {
++ compatible = "fsl,bman-fbpr";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++&qman_fqd {
++ compatible = "fsl,qman-fqd";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++&qman_pfdr {
++ compatible = "fsl,qman-pfdr";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++
++&soc {
++#include "qoriq-dpaa-eth.dtsi"
++#include "qoriq-fman3-0-6oh.dtsi"
++};
++
++&fman0 {
++ compatible = "fsl,fman", "simple-bus";
++};
+--- a/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts
++++ b/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts
+@@ -313,3 +313,29 @@
+ &sata {
+ status = "disabled";
+ };
++
++/* Additions for Layerscape SDK (4.4/4.9) Kernel only
++ * These kernels need additional setup for FMan/QMan DMA shared memory
++ */
++
++&bman_fbpr {
++ compatible = "fsl,bman-fbpr";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++&qman_fqd {
++ compatible = "fsl,qman-fqd";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++&qman_pfdr {
++ compatible = "fsl,qman-pfdr";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++
++&soc {
++#include "qoriq-dpaa-eth.dtsi"
++#include "qoriq-fman3-0-6oh.dtsi"
++};
++
++&fman0 {
++ compatible = "fsl,fman", "simple-bus";
++};
tree) and set up the MAC accordingly
---
- drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 1 +
- .../ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c | 13 +++++++++++++
+ drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 1
+ drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c | 13 ++++++++++
2 files changed, 14 insertions(+)
--- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
{
t_Memac *p_Memac = (t_Memac *)h_Memac;
-+ struct mac_device *mac_dev = (struct mac_device *)p_Memac->h_App;
++ struct mac_device *mac_dev = (struct mac_device *)p_Memac->h_App;
+
SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE);
SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE);
fman_memac_enable(p_Memac->p_MemMap, (mode & e_COMM_MODE_RX), (mode & e_COMM_MODE_TX));
-+ if (ENET_INTERFACE_FROM_MODE(p_Memac->enetMode) == e_ENET_IF_RGMII) {
-+ if (mac_dev->fixed_link) {
-+ printk("This is a fixed-link, forcing speed %d duplex %d\n",mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex);
-+ MemacAdjustLink(h_Memac,mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex);
-+ }
++ if (ENET_INTERFACE_FROM_MODE(p_Memac->enetMode) == e_ENET_IF_RGMII) {
++ if (mac_dev->fixed_link) {
++ printk(KERN_INFO "This is a fixed-link, forcing speed %d duplex %d\n",mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex);
++ MemacAdjustLink(h_Memac,mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex);
+ }
++ }
+
return E_OK;
}
--- /dev/null
+--- a/drivers/mmc/host/sdhci-of-esdhc.c
++++ b/drivers/mmc/host/sdhci-of-esdhc.c
+@@ -619,6 +619,7 @@ static void esdhc_reset(struct sdhci_hos
+ static const struct of_device_id scfg_device_ids[] = {
+ { .compatible = "fsl,t1040-scfg", },
+ { .compatible = "fsl,ls1012a-scfg", },
++ { .compatible = "fsl,ls1043a-scfg", },
+ { .compatible = "fsl,ls1046a-scfg", },
+ {}
+ };
projects / openwrt / staging / hauke.git / commitdiff