ramips: add preliminary support for WIO ONE

Signed-off-by: Felix Fietkau <nbd@nbd.name>

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f7ef126b0d976b9b1ecd1871df7aba059c66e14e..be0accda89080fe439c755599629207ff0dac4eb 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -453,6 +453,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "2:lan" "6t@eth0"
                ;;
+       wio,wio-one)
+               ucidef_add_switch "switch0" \
+                       "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan" "6@eth0"
+               ;;
        wiznet,wizfi630a)
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:wan" "6@eth0"

diff --git a/target/linux/ramips/dts/WIO-ONE.dts b/target/linux/ramips/dts/WIO-ONE.dts
new file mode 100644 (file)
index 0000000..e470535
--- /dev/null
+++ b/target/linux/ramips/dts/WIO-ONE.dts
@@ -0,0 +1,130 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "wio,wio-one", "mediatek,mt7621-soc";
+       model = "WIO ONE";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "wio-one:green:power";
+                       gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+               };
+
+               alarm {
+                       label = "wio-one:red:alarm";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               usb_power {
+                       gpio-export,name = "usb";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <104000000>;
+               m25p,fast-read;
+               m25p,chunked-io = <32>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                               compatible = "denx,uimage";
+                       };
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 4>;
+       mtd-mac-address-increment = <(-2)>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci", "jtag";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               adant,sas-devid = <1>;
+               adant,sas-gpio = <45 46 47 48>;
+       };
+};
+
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               adant,sas-devid = <0>;
+               adant,sas-gpio = <41 42 43 44>;
+       };
+};
+
+&xhci {
+       status = "disabled";
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index eeda908c444bac81522855e21136b61c7198164b..15fdcbde059d3ae7673dbc8f567865550257b716 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -696,6 +696,16 @@ define Device/ap-mtkh7-0006
 endef
 TARGET_DEVICES += ap-mtkh7-0006
 
+define Device/wio-one
+  DTS := WIO-ONE
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  SUPPORTED_DEVICES := wio,wio-one
+  DEVICE_TITLE := WIO ONE
+  DEVICE_PACKAGES := \
+       kmod-mt7603 kmod-mt76x2 kmod-usb3 wpad-mini
+endef
+TARGET_DEVICES += wio-one
+
 define Device/youhua_wr1200js
   MTK_SOC := mt7621
   IMAGE_SIZE := 16064k