ramips: add support for Mercury MAC1200R v2

MT7628AN + MT7612E, 8MB SPI flash, 64MB DDR RAM
reset button GPIO is still missing (anyone?)
bootloader password is 'slp'

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 32bfa77f70e39f1a3c6cdc942e7fbe53557b1526..e9df34524b5ea97bdcc50e2b6feeaa32574eb6a1 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -72,6 +72,7 @@ ramips_setup_interfaces()
        dir-615-h1|\
        firewrt|\
        hlk-rm04|\
+       mac1200rv2|\
        miwifi-mini|\
        miwifi-nano|\
        mt7621|\
@@ -313,6 +314,10 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 4)
                lan_mac=$(mtd_get_mac_binary factory 46)
                ;;
+       mac1200rv2)
+               lan_mac=$(mtd_get_mac_binary factory_info 13)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
+               ;;
        m3|\
        m4|\
        x5|\

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 5693f6307edeb415c39481f5cb6129a9646f89fb..969594d8a60fcb33e18b8e348e584669bd9a55d6 100644 (file)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -65,6 +65,7 @@ get_status_led() {
        dir-620-d1|\
        hpm|\
        hw550-3g|\
+       mac1200rv2|\
        miniembwifi|\
        mofi3500-3gn|\
        rut5xx|\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 1e9fa90b5dc3cead625a8004eb924073110d5814..98bc68c39732452b9d7c2b2bcac402b3fda176d3 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -250,6 +250,9 @@ ramips_board_detect() {
        *"Memory 2 Move")
                name="m2m"
                ;;
+       *"Mercury MAC1200R v2")
+               name="mac1200rv2"
+               ;;
        *"MicroWRT")
                name="microwrt"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index d7f5a73e7716fce62bbacaec22bd8bc56611d2c8..e3a74e092814c71293c2a491d32144023f7e8169 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -76,6 +76,7 @@ platform_check_image() {
        m2m|\
        m3|\
        m4|\
+       mac1200rv2|\
        microwrt|\
        miniembplug|\
        miniembwifi|\

diff --git a/target/linux/ramips/dts/MAC1200RV2.dts b/target/linux/ramips/dts/MAC1200RV2.dts
new file mode 100644 (file)
index 0000000..9576081
--- /dev/null
+++ b/target/linux/ramips/dts/MAC1200RV2.dts
@@ -0,0 +1,94 @@
+/dts-v1/;
+
+/include/ "mt7628an.dtsi"
+
+/ {
+       compatible = "mercury,mac1200rv2", "mediatek,mt7628an-soc";
+       model = "Mercury MAC1200R v2";
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "mac1200rv2:green:status";
+                       gpios = <&gpio0 11 1>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "w25q128";
+               reg = <0 0>;
+               linux,modalias = "m25p80", "w25q128";
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x1d800>;
+               };
+
+               factory: partition@0x1d800 {
+                       label = "factory_info";
+                       reg = <0x1d800 0x800>;
+                       read-only;
+               };
+
+               art: partition@0x1e000 {
+                       label = "art";
+                       reg = <0x1e000 0x2000>;
+                       read-only;
+               };
+
+               partition@20000 {
+                       label = "config";
+                       reg = <0x20000 0x10000>;
+               };
+
+               partition@30000 {
+                       label = "u-boot2";
+                       reg = <0x30000 0x10000>;
+               };
+
+               partition@40000 {
+                       label = "firmware";
+                       reg = <0x40000 0x7c0000>;
+               };
+       };
+};
+
+&ethernet {
+       pinctrl-names = "default";
+       mtd-mac-address = <&factory 0xd>;
+       ralink,port-map = "llllw";
+};
+
+&wmac {
+       status = "okay";
+       ralink,mtd-eeprom = <&art 0x0>;
+};
+
+&pcie {
+       status = "okay";
+       pcie-bridge {
+               mt76@0,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&art 0x1000>;
+                       mediatek,2ghz = <0>;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk
index fa7d1e77f267a4b5d9c794ded3967063397ce0f1..0647acf3ad5d89983f455ba3e0cf7a59699b78bb 100644 (file)
--- a/target/linux/ramips/image/mt7628.mk
+++ b/target/linux/ramips/image/mt7628.mk
@@ -33,3 +33,10 @@ define Device/duzun-dm06
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
 endef
 TARGET_DEVICES += duzun-dm06
+
+define Device/mac1200r-v2
+  DTS := MAC1200RV2
+  IMAGE_SIZE := $(ralink_default_fw_size_8M)
+  DEVICE_TITLE := Mercury MAC1200R v2.0
+endef
+TARGET_DEVICES += mac1200r-v2