nocat makefile from solar

SVN-Revision: 50

diff --git a/obsolete-buildroot/make/nocat-auth.mk b/obsolete-buildroot/make/nocat-auth.mk
new file mode 100644 (file)
index 0000000..e56e94c
--- /dev/null
+++ b/obsolete-buildroot/make/nocat-auth.mk
@@ -0,0 +1,72 @@
+#############################################################
+#
+# nocatauth.c
+#
+# There exists a real need in the embedded community for a 
+# captive portal with authentication. Till now I've been hording 
+# this sweet little creation to myself.
+#
+# NoCatSplash is a Open Public Network Gateway Daemon. It performs as a 
+# [captive/open/active] portal. When run on a gateway/router on a 
+# network, all web requests are redirected until the client clicks I
+# Accept to an AUP. The gateway daemon then changes the firewall rules
+# on the gateway to pass traffic for that client (based on IP address
+# and MAC address).
+#
+# NoCatSplash is the successor to NoCatAuth, which was written in Perl. 
+# NoCatSplash is written in multi-threaded ANSI C in order to be smaller
+# and work better on embedded style devices.
+#
+# NoCatSplash-Auth is the successor to them all which is NoCatSplash 
+# with the features found on NoCatAuth but written in ANSI C in order to
+# be smaller and work better on embedded style devices.
+#
+#############################################################
+NOCATSPLASHAUTH_SOURCE_URL:=
+NOCATSPLASHAUTH_SOURCE=NoCatSplash-auth.tgz
+NOCATSPLASHAUTH_BUILD_DIR=$(BUILD_DIR)/NoCatSplash-auth
+
+$(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE):
+        $(WGET) -P $(DL_DIR) $(NOCATSPLASHAUTH_SOURCE_URL)/$(NOCATSPLASHAUTH_SOURCE) 
+
+$(NOCATSPLASHAUTH_BUILD_DIR)/.unpacked: $(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE)
+       zcat $(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+       touch $(NOCATSPLASHAUTH_BUILD_DIR)/.unpacked
+
+$(NOCATSPLASHAUTH_BUILD_DIR)/.configured: $(NOCATSPLASHAUTH_BUILD_DIR)/.unpacked
+       # Allow patches.  Needed for openwrt for instance.
+       #$(SOURCE_DIR)/patch-kernel.sh $(NOCATSPLASHAUTH_BUILD_DIR) $(SOURCE_DIR) nocatsplash-*.patch
+       (cd $(NOCATSPLASHAUTH_BUILD_DIR); \
+               ./configure \
+                       --prefix=/usr \
+                       --disable-glibtest \
+                       --with-glib-prefix=$(TARGET_DIR)/usr \
+                       --with-mode=passive \
+       )
+       touch  $(NOCATSPLASHAUTH_BUILD_DIR)/.configured
+
+$(NOCATSPLASHAUTH_BUILD_DIR)/splashd: $(NOCATSPLASHAUTH_BUILD_DIR)/.configured
+       $(TARGET_CONFIGURE_OPTS) \
+       $(MAKE) -C $(NOCATSPLASHAUTH_BUILD_DIR) \
+               CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)"
+
+$(TARGET_DIR)/sbin/splashd: $(NOCATSPLASHAUTH_BUILD_DIR)/splashd
+       $(TARGET_CONFIGURE_OPTS) \
+       $(MAKE) -C $(NOCATSPLASHAUTH_BUILD_DIR) \
+               PREFIX=/usr \
+               CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)" \
+               DESTDIR=$(TARGET_DIR) install
+       $(STRIP) $(TARGET_DIR)/usr/bin/nocat*
+       rm -rf $(TARGET_DIR)/usr/man
+
+nocatauth: $(TARGET_DIR)/sbin/splashd
+
+nocatauth-source: $(DL_DIR)/$(NOCATSPLASHAUTH_SOURCE)
+
+nocatauth-clean:
+       $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NOCATSPLASHAUTH_BUILD_DIR) uninstall
+       -$(MAKE) -C $(NOCATSPLASHAUTH_BUILD_DIR) clean
+
+nocatauth-dirclean:
+       rm -rf $(NOCATSPLASHAUTH_BUILD_DIR)
+