CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_RTL9300=y
CONFIG_I2C_RTL9300=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
#include <linux/of_platform.h>
#include "i2c-rtl9300.h"
-#define REG(x) (i2c->base + x + (i2c->scl_num ? i2c->mst2_offset : 0))
-#define REG_MASK(clear, set, reg) \
- writel((readl(REG(reg)) & ~(clear)) | (set), REG(reg))
+#define REG(i, x) (i->base + x + (i->scl_num ? i->mst2_offset : 0))
+#define REG_MASK(i, clear, set, reg) \
+ writel((readl(REG(i, reg)) & ~(clear)) | (set), REG(i, reg))
struct i2c_drv_data {
int scl0_pin;
static void rtl9300_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len)
{
// Set register address width
- REG_MASK(0x3 << RTL9300_I2C_CTRL2_MADDR_WIDTH, len << RTL9300_I2C_CTRL2_MADDR_WIDTH,
+ REG_MASK(i2c, 0x3 << RTL9300_I2C_CTRL2_MADDR_WIDTH, len << RTL9300_I2C_CTRL2_MADDR_WIDTH,
RTL9300_I2C_CTRL2);
// Set register address
- REG_MASK(0xffffff << RTL9300_I2C_CTRL1_MEM_ADDR, reg << RTL9300_I2C_CTRL1_MEM_ADDR,
+ REG_MASK(i2c, 0xffffff << RTL9300_I2C_CTRL1_MEM_ADDR, reg << RTL9300_I2C_CTRL1_MEM_ADDR,
RTL9300_I2C_CTRL1);
}
static void rtl9310_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len)
{
// Set register address width
- REG_MASK(0x3 << RTL9310_I2C_CTRL_MADDR_WIDTH, len << RTL9310_I2C_CTRL_MADDR_WIDTH,
+ REG_MASK(i2c, 0x3 << RTL9310_I2C_CTRL_MADDR_WIDTH, len << RTL9310_I2C_CTRL_MADDR_WIDTH,
RTL9310_I2C_CTRL);
// Set register address
- writel(reg, REG(RTL9310_I2C_MEMADDR));
+ writel(reg, REG(i2c, RTL9310_I2C_MEMADDR));
}
static void rtl9300_i2c_config_io(struct rtl9300_i2c *i2c, int scl_num, int sda_num)
u32 v;
// Set SCL pin
- REG_MASK(0, BIT(RTL9300_I2C_CTRL1_GPIO8_SCL_SEL), RTL9300_I2C_CTRL1);
+ REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_GPIO8_SCL_SEL), RTL9300_I2C_CTRL1);
// Set SDA pin
- REG_MASK(0x7 << RTL9300_I2C_CTRL1_SDA_OUT_SEL,
+ REG_MASK(i2c, 0x7 << RTL9300_I2C_CTRL1_SDA_OUT_SEL,
i2c->sda_num << RTL9300_I2C_CTRL1_SDA_OUT_SEL, RTL9300_I2C_CTRL1);
// Set SDA pin to I2C functionality
u32 v;
// Set SCL pin
- REG_MASK(0, BIT(RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL + scl_num), RTL9310_I2C_MST_IF_SEL);
+ REG_MASK(i2c, 0, BIT(RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL + scl_num), RTL9310_I2C_MST_IF_SEL);
// Set SDA pin
- REG_MASK(0x7 << RTL9310_I2C_CTRL_SDA_OUT_SEL,
+ REG_MASK(i2c, 0x7 << RTL9310_I2C_CTRL_SDA_OUT_SEL,
i2c->sda_num << RTL9310_I2C_CTRL_SDA_OUT_SEL, RTL9310_I2C_CTRL);
// Set SDA pin to I2C functionality
static int rtl9300_i2c_config_xfer(struct rtl9300_i2c *i2c, u16 addr, u16 len)
{
// Set bus frequency
- REG_MASK(0x3 << RTL9300_I2C_CTRL2_SCL_FREQ,
+ REG_MASK(i2c, 0x3 << RTL9300_I2C_CTRL2_SCL_FREQ,
i2c->bus_freq << RTL9300_I2C_CTRL2_SCL_FREQ, RTL9300_I2C_CTRL2);
// Set slave device address
- REG_MASK(0x7f << RTL9300_I2C_CTRL2_DEV_ADDR,
+ REG_MASK(i2c, 0x7f << RTL9300_I2C_CTRL2_DEV_ADDR,
addr << RTL9300_I2C_CTRL2_DEV_ADDR, RTL9300_I2C_CTRL2);
// Set data length
- REG_MASK(0xf << RTL9300_I2C_CTRL2_DATA_WIDTH,
+ REG_MASK(i2c, 0xf << RTL9300_I2C_CTRL2_DATA_WIDTH,
((len - 1) & 0xf) << RTL9300_I2C_CTRL2_DATA_WIDTH, RTL9300_I2C_CTRL2);
// Set read mode to random
- REG_MASK(0x1 << RTL9300_I2C_CTRL2_READ_MODE, 0, RTL9300_I2C_CTRL2);
+ REG_MASK(i2c, 0x1 << RTL9300_I2C_CTRL2_READ_MODE, 0, RTL9300_I2C_CTRL2);
return 0;
}
static int rtl9310_i2c_config_xfer(struct rtl9300_i2c *i2c, u16 addr, u16 len)
{
// Set bus frequency
- REG_MASK(0x3 << RTL9310_I2C_CTRL_SCL_FREQ,
+ REG_MASK(i2c, 0x3 << RTL9310_I2C_CTRL_SCL_FREQ,
i2c->bus_freq << RTL9310_I2C_CTRL_SCL_FREQ, RTL9310_I2C_CTRL);
// Set slave device address
- REG_MASK(0x7f << RTL9310_I2C_CTRL_DEV_ADDR,
+ REG_MASK(i2c, 0x7f << RTL9310_I2C_CTRL_DEV_ADDR,
addr << RTL9310_I2C_CTRL_DEV_ADDR, RTL9310_I2C_CTRL);
// Set data length
- REG_MASK(0xf << RTL9310_I2C_CTRL_DATA_WIDTH,
+ REG_MASK(i2c, 0xf << RTL9310_I2C_CTRL_DATA_WIDTH,
((len - 1) & 0xf) << RTL9310_I2C_CTRL_DATA_WIDTH, RTL9310_I2C_CTRL);
// Set read mode to random
- REG_MASK(0x1 << RTL9310_I2C_CTRL_READ_MODE, 0, RTL9310_I2C_CTRL);
+ REG_MASK(i2c, 0x1 << RTL9310_I2C_CTRL_READ_MODE, 0, RTL9310_I2C_CTRL);
return 0;
}
static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len)
{
- return i2c_read(REG(RTL9300_I2C_DATA_WORD0), buf, len);
+ return i2c_read(REG(i2c, RTL9300_I2C_DATA_WORD0), buf, len);
}
static int rtl9300_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len)
{
- return i2c_write(REG(RTL9300_I2C_DATA_WORD0), buf, len);
+ return i2c_write(REG(i2c, RTL9300_I2C_DATA_WORD0), buf, len);
}
static int rtl9310_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len)
{
- return i2c_read(REG(RTL9310_I2C_DATA), buf, len);
+ return i2c_read(REG(i2c, RTL9310_I2C_DATA), buf, len);
}
static int rtl9310_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len)
{
- return i2c_write(REG(RTL9310_I2C_DATA), buf, len);
+ return i2c_write(REG(i2c, RTL9310_I2C_DATA), buf, len);
}
static void rtl9300_writel(struct rtl9300_i2c *i2c, u32 data)
{
- writel(data, REG(RTL9300_I2C_DATA_WORD0));
+ writel(data, REG(i2c, RTL9300_I2C_DATA_WORD0));
}
static void rtl9310_writel(struct rtl9300_i2c *i2c, u32 data)
{
- writel(data, REG(RTL9310_I2C_DATA));
+ writel(data, REG(i2c, RTL9310_I2C_DATA));
}
u32 v;
if (read_write == I2C_SMBUS_READ)
- REG_MASK(BIT(RTL9300_I2C_CTRL1_RWOP), 0, RTL9300_I2C_CTRL1);
+ REG_MASK(i2c, BIT(RTL9300_I2C_CTRL1_RWOP), 0, RTL9300_I2C_CTRL1);
else
- REG_MASK(0, BIT(RTL9300_I2C_CTRL1_RWOP), RTL9300_I2C_CTRL1);
+ REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_RWOP), RTL9300_I2C_CTRL1);
- REG_MASK(0, BIT(RTL9300_I2C_CTRL1_I2C_TRIG), RTL9300_I2C_CTRL1);
+ REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_I2C_TRIG), RTL9300_I2C_CTRL1);
do {
- v = readl(REG(RTL9300_I2C_CTRL1));
+ v = readl(REG(i2c, RTL9300_I2C_CTRL1));
} while (v & BIT(RTL9300_I2C_CTRL1_I2C_TRIG));
if (v & BIT(RTL9300_I2C_CTRL1_I2C_FAIL))
if (read_write == I2C_SMBUS_READ) {
if (size == I2C_SMBUS_BYTE || size == I2C_SMBUS_BYTE_DATA){
- data->byte = readl(REG(RTL9300_I2C_DATA_WORD0));
+ data->byte = readl(REG(i2c, RTL9300_I2C_DATA_WORD0));
} else if (size == I2C_SMBUS_WORD_DATA) {
- data->word = readl(REG(RTL9300_I2C_DATA_WORD0));
+ data->word = readl(REG(i2c, RTL9300_I2C_DATA_WORD0));
} else if (len > 0) {
rtl9300_i2c_read(i2c, &data->block[0], len);
}
u32 v;
if (read_write == I2C_SMBUS_READ)
- REG_MASK(BIT(RTL9310_I2C_CTRL_RWOP), 0, RTL9310_I2C_CTRL);
+ REG_MASK(i2c, BIT(RTL9310_I2C_CTRL_RWOP), 0, RTL9310_I2C_CTRL);
else
- REG_MASK(0, BIT(RTL9310_I2C_CTRL_RWOP), RTL9310_I2C_CTRL);
+ REG_MASK(i2c, 0, BIT(RTL9310_I2C_CTRL_RWOP), RTL9310_I2C_CTRL);
- REG_MASK(0, BIT(RTL9310_I2C_CTRL_I2C_TRIG), RTL9310_I2C_CTRL);
+ REG_MASK(i2c, 0, BIT(RTL9310_I2C_CTRL_I2C_TRIG), RTL9310_I2C_CTRL);
do {
- v = readl(REG(RTL9310_I2C_CTRL));
+ v = readl(REG(i2c, RTL9310_I2C_CTRL));
} while (v & BIT(RTL9310_I2C_CTRL_I2C_TRIG));
if (v & BIT(RTL9310_I2C_CTRL_I2C_FAIL))
if (read_write == I2C_SMBUS_READ) {
if (size == I2C_SMBUS_BYTE || size == I2C_SMBUS_BYTE_DATA){
- data->byte = readl(REG(RTL9310_I2C_DATA));
+ data->byte = readl(REG(i2c, RTL9310_I2C_DATA));
} else if (size == I2C_SMBUS_WORD_DATA) {
- data->word = readl(REG(RTL9310_I2C_DATA));
+ data->word = readl(REG(i2c, RTL9310_I2C_DATA));
} else if (len > 0) {
rtl9310_i2c_read(i2c, &data->block[0], len);
}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C multiplexer for the 2 I2C Masters of the RTL9300
+ * with up to 8 channels each, but which are not entirely
+ * independent of each other
+ */
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "../busses/i2c-rtl9300.h"
+
+#define NUM_MASTERS 2
+#define NUM_BUSSES 8
+
+#define REG(mst, x) (mux->base + x + (mst ? mux->i2c->mst2_offset : 0))
+#define REG_MASK(mst, clear, set, reg) \
+ writel((readl(REG((mst),(reg))) & ~(clear)) | (set), REG((mst),(reg)))
+
+struct channel {
+ u8 sda_num;
+ u8 scl_num;
+};
+
+static struct channel channels[NUM_MASTERS * NUM_BUSSES];
+
+struct rtl9300_mux {
+ void __iomem *base;
+ struct device *dev;
+ struct i2c_adapter *parent;
+ struct rtl9300_i2c * i2c;
+};
+
+struct i2c_mux_data {
+ int scl0_pin;
+ int scl1_pin;
+ int sda0_pin;
+ int sda_pins;
+ int (*i2c_mux_select)(struct i2c_mux_core *muxc, u32 chan);
+ int (*i2c_mux_deselect)(struct i2c_mux_core *muxc, u32 chan);
+ void (*sda_sel)(struct i2c_mux_core *muxc, int pin);
+};
+
+static int rtl9300_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct rtl9300_mux *mux = i2c_mux_priv(muxc);
+
+ // Set SCL pin
+ REG_MASK(channels[chan].scl_num, 0,
+ BIT(RTL9300_I2C_CTRL1_GPIO8_SCL_SEL), RTL9300_I2C_CTRL1);
+
+ // Set SDA pin
+ REG_MASK(channels[chan].scl_num, 0x7 << RTL9300_I2C_CTRL1_SDA_OUT_SEL,
+ channels[chan].sda_num << RTL9300_I2C_CTRL1_SDA_OUT_SEL, RTL9300_I2C_CTRL1);
+
+ mux->i2c->sda_num = channels[chan].sda_num;
+ mux->i2c->scl_num = channels[chan].scl_num;
+
+ return 0;
+}
+
+static int rtl9310_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct rtl9300_mux *mux = i2c_mux_priv(muxc);
+
+ // Set SCL pin
+ REG_MASK(0, 0, BIT(RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL + channels[chan].scl_num),
+ RTL9310_I2C_MST_IF_SEL);
+
+ // Set SDA pin
+ REG_MASK(channels[chan].scl_num, 0xf << RTL9310_I2C_CTRL_SDA_OUT_SEL,
+ channels[chan].sda_num << RTL9310_I2C_CTRL_SDA_OUT_SEL, RTL9310_I2C_CTRL);
+
+ mux->i2c->sda_num = channels[chan].sda_num;
+ mux->i2c->scl_num = channels[chan].scl_num;
+
+ return 0;
+}
+
+static int rtl9300_i2c_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+ return 0;
+}
+
+static void rtl9300_sda_sel(struct i2c_mux_core *muxc, int pin)
+{
+ struct rtl9300_mux *mux = i2c_mux_priv(muxc);
+ u32 v;
+
+ // Set SDA pin to I2C functionality
+ v = readl(REG(0, RTL9300_I2C_MST_GLB_CTRL));
+ v |= BIT(pin);
+ writel(v, REG(0, RTL9300_I2C_MST_GLB_CTRL));
+}
+
+static void rtl9310_sda_sel(struct i2c_mux_core *muxc, int pin)
+{
+ struct rtl9300_mux *mux = i2c_mux_priv(muxc);
+ u32 v;
+
+ // Set SDA pin to I2C functionality
+ v = readl(REG(0, RTL9310_I2C_MST_IF_SEL));
+ v |= BIT(pin);
+ writel(v, REG(0, RTL9310_I2C_MST_IF_SEL));
+}
+
+static struct device_node *mux_parent_adapter(struct device *dev, struct rtl9300_mux *mux)
+{
+ struct device_node *node = dev->of_node;
+ struct device_node *parent_np;
+ struct i2c_adapter *parent;
+
+ parent_np = of_parse_phandle(node, "i2c-parent", 0);
+ if (!parent_np) {
+ dev_err(dev, "Cannot parse i2c-parent\n");
+ return ERR_PTR(-ENODEV);
+ }
+ parent = of_find_i2c_adapter_by_node(parent_np);
+ of_node_put(parent_np);
+ if (!parent)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ if (!(of_device_is_compatible(parent_np, "realtek,rtl9300-i2c")
+ || of_device_is_compatible(parent_np, "realtek,rtl9310-i2c"))){
+ dev_err(dev, "I2C parent not an RTL9300 I2C controller\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ mux->parent = parent;
+ mux->i2c = (struct rtl9300_i2c *)i2c_get_adapdata(parent);
+ mux->base = mux->i2c->base;
+
+ return parent_np;
+}
+
+struct i2c_mux_data rtl9300_i2c_mux_data = {
+ .scl0_pin = 8,
+ .scl1_pin = 17,
+ .sda0_pin = 9,
+ .sda_pins = 8,
+ .i2c_mux_select = rtl9300_i2c_mux_select,
+ .i2c_mux_deselect = rtl9300_i2c_mux_deselect,
+ .sda_sel = rtl9300_sda_sel,
+};
+
+struct i2c_mux_data rtl9310_i2c_mux_data = {
+ .scl0_pin = 13,
+ .scl1_pin = 14,
+ .sda0_pin = 0,
+ .sda_pins = 16,
+ .i2c_mux_select = rtl9310_i2c_mux_select,
+ .i2c_mux_deselect = rtl9300_i2c_mux_deselect,
+ .sda_sel = rtl9310_sda_sel,
+};
+
+static const struct of_device_id rtl9300_i2c_mux_of_match[] = {
+ { .compatible = "realtek,i2c-mux-rtl9300", .data = (void *) &rtl9300_i2c_mux_data},
+ { .compatible = "realtek,i2c-mux-rtl9310", .data = (void *) &rtl9310_i2c_mux_data},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, rtl9300_i2c_mux_of_match);
+
+static int rtl9300_i2c_mux_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *parent_np;
+ struct device_node *child;
+ struct i2c_mux_core *muxc;
+ struct rtl9300_mux *mux;
+ struct i2c_mux_data *mux_data;
+ int children;
+ int ret;
+
+ pr_info("%s probing I2C adapter\n", __func__);
+
+ if (!node) {
+ dev_err(dev, "No DT found\n");
+ return -EINVAL;
+ }
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ mux->dev = dev;
+
+ mux_data = (struct i2c_mux_data *) device_get_match_data(dev);
+
+ parent_np = mux_parent_adapter(dev, mux);
+ if (IS_ERR(parent_np))
+ return dev_err_probe(dev, PTR_ERR(parent_np), "i2c-parent adapter not found\n");
+
+ pr_info("%s base memory %08x\n", __func__, (u32)mux->base);
+
+ children = of_get_child_count(node);
+
+ muxc = i2c_mux_alloc(mux->parent, dev, children, 0, 0,
+ mux_data->i2c_mux_select, mux_data->i2c_mux_deselect);
+ if (!muxc) {
+ ret = -ENOMEM;
+ goto err_parent;
+ }
+ muxc->priv = mux;
+
+ platform_set_drvdata(pdev, muxc);
+
+ for_each_child_of_node(node, child) {
+ u32 chan;
+ u32 pin;
+
+ ret = of_property_read_u32(child, "reg", &chan);
+ if (ret < 0) {
+ dev_err(dev, "no reg property for node '%pOFn'\n",
+ child);
+ goto err_children;
+ }
+
+ if (chan >= NUM_MASTERS * NUM_BUSSES) {
+ dev_err(dev, "invalid reg %u\n", chan);
+ ret = -EINVAL;
+ goto err_children;
+ }
+
+ if (of_property_read_u32(child, "scl-pin", &pin)) {
+ dev_warn(dev, "SCL pin not found in DT, using default\n");
+ pin = mux_data->scl0_pin;
+ }
+ if (!(pin == mux_data->scl0_pin || pin == mux_data->scl1_pin)) {
+ dev_warn(dev, "SCL pin %d not supported\n", pin);
+ ret = -EINVAL;
+ goto err_children;
+ }
+ channels[chan].scl_num = pin == mux_data->scl0_pin ? 0 : 1;
+ pr_info("%s channel %d scl_num %d\n", __func__, chan, channels[chan].scl_num);
+
+ if (of_property_read_u32(child, "sda-pin", &pin)) {
+ dev_warn(dev, "SDA pin not found in DT, using default \n");
+ pin = mux_data->sda0_pin;
+ }
+ channels[chan].sda_num = pin - mux_data->sda0_pin;
+ if (channels[chan].sda_num < 0 || channels[chan].sda_num >= mux_data->sda_pins) {
+ dev_warn(dev, "SDA pin %d not supported\n", pin);
+ return -EINVAL;
+ }
+ pr_info("%s channel %d sda_num %d\n", __func__, chan, channels[chan].sda_num);
+
+ mux_data->sda_sel(muxc, channels[chan].sda_num);
+
+ ret = i2c_mux_add_adapter(muxc, 0, chan, 0);
+ if (ret)
+ goto err_children;
+ }
+
+ dev_info(dev, "%d-port mux on %s adapter\n", children, mux->parent->name);
+
+ return 0;
+
+err_children:
+ i2c_mux_del_adapters(muxc);
+err_parent:
+ i2c_put_adapter(mux->parent);
+
+ return ret;
+}
+
+static int rtl9300_i2c_mux_remove(struct platform_device *pdev)
+{
+ struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+ i2c_mux_del_adapters(muxc);
+ i2c_put_adapter(muxc->parent);
+
+ return 0;
+}
+
+static struct platform_driver i2c_mux_driver = {
+ .probe = rtl9300_i2c_mux_probe,
+ .remove = rtl9300_i2c_mux_remove,
+ .driver = {
+ .name = "i2c-mux-rtl9300",
+ .of_match_table = rtl9300_i2c_mux_of_match,
+ },
+};
+module_platform_driver(i2c_mux_driver);
+
+MODULE_DESCRIPTION("RTL9300 I2C multiplexer driver");
+MODULE_AUTHOR("Birger Koblitz");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
+index 1708b1a82d..d419e0167d 100644
+--- a/drivers/i2c/muxes/Kconfig
++++ b/drivers/i2c/muxes/Kconfig
+@@ -99,6 +99,15 @@ config I2C_MUX_REG
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-reg.
+
++config I2C_MUX_RTL9300
++ tristate "RTL9300 based I2C multiplexer"
++ help
++ If you say yes to this option, support will be included for a
++ RTL9300 based I2C multiplexer.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-mux-reg.
++
+ config I2C_DEMUX_PINCTRL
+ tristate "pinctrl-based I2C demultiplexer"
+ depends on PINCTRL && OF
+diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
+index 6d9d865e85..5bb3ce511d 100644
+--- a/drivers/i2c/muxes/Makefile
++++ b/drivers/i2c/muxes/Makefile
+@@ -14,5 +14,6 @@ obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
+ obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
+ obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
+ obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
++obj-$(CONFIG_I2C_MUX_RTL9300) += i2c-mux-rtl9300.o
+
+ ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
projects / openwrt / staging / aparcar.git / commitdiff