/* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
- gpio_outen(pin, pin);
- gpio_control(pin, 0);
- gpio_out(pin, pin);
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
/* Wait 5s, so the HDD can spin up */
set_current_state(TASK_INTERRUPTIBLE);
static void __init NetCenter_init(void) {
/* unset pin 6 (+12V) */
int pin = 1 << 6;
- gpio_outen(pin, pin);
- gpio_control(pin, 0);
- gpio_out(pin, pin);
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
/* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
pin = 1 << 1;
- gpio_outen(pin, pin);
- gpio_control(pin, 0);
- gpio_out(pin, pin);
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
/* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
bcm4780_init();
}
int pin = 1 << 2;
/* FIXME: switch comes up, but port mappings/vlans not right */
- gpio_outen(pin, pin);
- gpio_control(pin, 0);
- gpio_out(pin, pin);
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
}
static struct platform_t __initdata platforms[] = {
return NULL;
}
+static inline void ssb_maskset32(struct ssb_device *dev,
+ u16 offset, u32 mask, u32 set)
+{
+ ssb_write32(dev, offset, (ssb_read32(dev, offset) & mask) | set);
+}
+
+static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
+{
+ int irq;
+
+ irq = gpio_to_irq(0);
+ if (irq == -EINVAL) return;
+
+ if (enabled) {
+ if (request_irq(irq, handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "gpio", handler))
+ return;
+ } else {
+ free_irq(irq, handler);
+ }
+
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ if (bcm47xx_bus.ssb.chipco.dev)
+ ssb_maskset32(bcm47xx_bus.ssb.chipco.dev, SSB_CHIPCO_IRQMASK, ~SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ if (bcm47xx_bus.bcma.bus.drv_cc.core)
+ bcma_maskset32(bcm47xx_bus.bcma.bus.drv_cc.core, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO, (enabled ? BCMA_CC_IRQ_GPIO : 0));
+ break;
+#endif
+ }
+}
+
static void register_buttons(struct button_t *b)
{
for (; b->name; b++)
platform.button_mask &= ~gpiomask;
- gpio_outen(platform.button_mask, 0);
- gpio_control(platform.button_mask, 0);
- platform.button_polarity = gpio_in() & platform.button_mask;
- gpio_intpolarity(platform.button_mask, platform.button_polarity);
- gpio_setintmask(platform.button_mask, platform.button_mask);
+ bcm47xx_gpio_outen(platform.button_mask, 0);
+ bcm47xx_gpio_control(platform.button_mask, 0);
+ platform.button_polarity = bcm47xx_gpio_in(~0) & platform.button_mask;
+ bcm47xx_gpio_polarity(platform.button_mask, platform.button_polarity);
+ bcm47xx_gpio_intmask(platform.button_mask, platform.button_mask);
gpio_set_irqenable(1, button_handler);
}
static void unregister_buttons(struct button_t *b)
{
- gpio_setintmask(platform.button_mask, 0);
+ bcm47xx_gpio_intmask(platform.button_mask, 0);
gpio_set_irqenable(0, button_handler);
}
struct button_t *b;
u32 in, changed;
- in = gpio_in() & platform.button_mask;
- gpio_intpolarity(platform.button_mask, in);
+ in = bcm47xx_gpio_in(~0) & platform.button_mask;
+ bcm47xx_gpio_polarity(platform.button_mask, in);
changed = platform.button_polarity ^ in;
platform.button_polarity = in;
- changed &= ~gpio_outen(0, 0);
+ changed &= ~bcm47xx_gpio_outen(0, 0);
for (b = platform.buttons; b->name; b++) {
struct event_t *event;
}
}
- gpio_outen(mask, oe_mask);
- gpio_control(mask, 0);
- gpio_out(mask, val);
- gpio_setintmask(mask, 0);
+ bcm47xx_gpio_outen(mask, oe_mask);
+ bcm47xx_gpio_control(mask, 0);
+ bcm47xx_gpio_out(mask, val);
+ bcm47xx_gpio_intmask(mask, 0);
}
static void unregister_leds(struct led_t *l)
static void set_led_extif(struct led_t *led)
{
- gpio_set_extif(led->gpio, led->state);
+ volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
+ if (led->state)
+ *addr = 0xFF;
+ else
+ *addr;
}
static void led_flash(unsigned long dummy) {
mask &= ~gpiomask;
if (mask) {
- u32 val = ~gpio_in();
+ u32 val = ~bcm47xx_gpio_in(~0);
- gpio_outen(mask, mask);
- gpio_control(mask, 0);
- gpio_out(mask, val);
+ bcm47xx_gpio_outen(mask, mask);
+ bcm47xx_gpio_control(mask, 0);
+ bcm47xx_gpio_out(mask, val);
}
if (mask || extif_blink) {
mod_timer(&led_timer, jiffies + FLASH_TIME);
if (led->gpio & GPIO_TYPE_EXTIF) {
len = sprintf(page, "%d\n", led->state);
} else {
- u32 in = (gpio_in() & led->gpio ? 1 : 0);
+ u32 in = (bcm47xx_gpio_in(~0) & led->gpio ? 1 : 0);
u8 p = (led->polarity == NORMAL ? 0 : 1);
len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
}
led->state = p ^ ((page[0] == '1') ? 1 : 0);
set_led_extif(led);
} else {
- gpio_outen(led->gpio, led->gpio);
- gpio_control(led->gpio, 0);
- gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
+ bcm47xx_gpio_outen(led->gpio, led->gpio);
+ bcm47xx_gpio_control(led->gpio, 0);
+ bcm47xx_gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
}
}
break;
#include <linux/gpio.h>
#include <bcm47xx.h>
-static inline u32 gpio_in(void)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_in(&bcm47xx_bus.ssb, ~0);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, ~0);
-#endif
- }
- return -EINVAL;
-}
-
-static inline u32 gpio_out(u32 mask, u32 value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
-#endif
- }
- return -EINVAL;
-}
-
-static inline u32 gpio_outen(u32 mask, u32 value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
- return 0;
-#endif
- }
- return -EINVAL;
-}
-
-static inline u32 gpio_control(u32 mask, u32 value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_control(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
-#endif
- }
- return -EINVAL;
-}
-
-static inline u32 gpio_setintmask(u32 mask, u32 value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
-#endif
- }
- return -EINVAL;
-}
-
-static inline u32 gpio_intpolarity(u32 mask, u32 value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
-#endif
- }
- return -EINVAL;
-}
-
-#ifdef CONFIG_BCM47XX_SSB
-static inline u32 __ssb_write32_masked(struct ssb_device *dev, u16 offset,
- u32 mask, u32 value)
-{
- value &= mask;
- value |= ssb_read32(dev, offset) & ~mask;
- ssb_write32(dev, offset, value);
- return value;
-}
-#endif
-
-#ifdef CONFIG_BCM47XX_BCMA
-static inline u32 __bcma_write32_masked(struct bcma_device *dev, u16 offset,
- u32 mask, u32 value)
-{
- value &= mask;
- value |= bcma_read32(dev, offset) & ~mask;
- bcma_write32(dev, offset, value);
- return value;
-}
-#endif
-
-static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
-{
- int irq;
-
- irq = gpio_to_irq(0);
- if (irq == -EINVAL) return;
-
- if (enabled) {
- if (request_irq(irq, handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "gpio", handler))
- return;
- } else {
- free_irq(irq, handler);
- }
-
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- if (bcm47xx_bus.ssb.chipco.dev)
- __ssb_write32_masked(bcm47xx_bus.ssb.chipco.dev, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
- break;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- if (bcm47xx_bus.bcma.bus.drv_cc.core)
- __bcma_write32_masked(bcm47xx_bus.bcma.bus.drv_cc.core, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO, (enabled ? BCMA_CC_IRQ_GPIO : 0));
- break;
-#endif
- }
-}
-
#define EXTIF_ADDR 0x1f000000
#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
#define GPIO_TYPE_EXTIF (0x1 << 24)
#define GPIO_TYPE_MASK (0xf << 24)
-static inline void gpio_set_extif(int gpio, int value)
-{
- volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (gpio & ~GPIO_TYPE_MASK);
- if (value)
- *addr = 0xFF;
- else
- *addr;
-}
-
#endif /* __DIAG_GPIO_H */
+++ /dev/null
-#ifndef __SWITCH_GPIO_H
-#define __SWITCH_GPIO_H
-
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/bcma/bcma_driver_chipcommon.h>
-#include <bcm47xx.h>
-
-static inline u32 gpio_in(void)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_in(&bcm47xx_bus.ssb, ~0);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, ~0);
-#endif
- }
- return -EINVAL;
-}
-
-static inline u32 gpio_out(u32 mask, u32 value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
-#endif
- }
- return -EINVAL;
-}
-
-static inline u32 gpio_outen(u32 mask, u32 value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
- return 0;
-#endif
- }
- return -EINVAL;
-}
-
-#endif /* __SWITCH_GPIO_H */
#define __GPIO_H
#ifdef CONFIG_BCM47XX
-#include "gpio-bcm947xx.h"
+#include <linux/gpio.h>
#else
#warning "Unsupported configuration."
-#define gpio_in() (-1U)
-#define gpio_out(mask, value) (-1U)
-#define gpio_outen(mask, value) (-1U)
-#define gpio_control(mask, value) (-1U)
-#define gpio_intmask(mask, value) (-1U)
-#define gpio_intpolarity(mask, value) (-1U)
+#define bcm47xx_gpio_in(mask) (-1U)
+#define bcm47xx_gpio_out(mask, value) (-1U)
+#define bcm47xx_gpio_outen(mask, value) (-1U)
+#define bcm47xx_gpio_control(mask, value) (-1U)
+#define bcm47xx_gpio_intmask(mask, value) (-1U)
+#define bcm47xx_gpio_polarity(mask, value) (-1U)
#endif
int i, len = (bits + 7) / 8;
__u8 mask;
- gpio_out(eecs, (cs ? eecs : 0));
+ bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */
/* Bit bang from MSB to LSB */
for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
/* Clock low */
- gpio_out(eesk, 0);
+ bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
/* Output on rising edge */
- gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
+ bcm47xx_gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
udelay(EEDI_SETUP_TIME);
/* Clock high */
- gpio_out(eesk, eesk);
+ bcm47xx_gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
}
}
/* Clock low */
- gpio_out(eesk, 0);
+ bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
if (cs)
- gpio_out(eecs, 0);
+ bcm47xx_gpio_out(eecs, 0);
}
int i, len = (bits + 7) / 8;
__u8 mask;
- gpio_out(eecs, (cs ? eecs : 0));
+ bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */
__u8 gp;
/* Clock low */
- gpio_out(eesk, 0);
+ bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
/* Input on rising edge */
- gp = gpio_in();
+ gp = bcm47xx_gpio_in(~0);
if (gp & eedi)
byte |= mask;
/* Clock high */
- gpio_out(eesk, eesk);
+ bcm47xx_gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
}
}
/* Clock low */
- gpio_out(eesk, 0);
+ bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
if (cs)
- gpio_out(eecs, 0);
+ bcm47xx_gpio_out(eecs, 0);
}
static void adm_enout(__u8 pins, __u8 val)
{
/* Prepare GPIO output value */
- gpio_out(pins, val);
+ bcm47xx_gpio_out(pins, val);
/* Enable GPIO outputs */
- gpio_outen(pins, pins);
+ bcm47xx_gpio_outen(pins, pins);
udelay(EECK_EDGE_TIME);
}
static void adm_disout(__u8 pins)
{
/* Disable GPIO outputs */
- gpio_outen(pins, 0);
+ bcm47xx_gpio_outen(pins, 0);
udelay(EECK_EDGE_TIME);
}
int i;
for (i = 0; i < clocks; i++) {
/* Clock high */
- gpio_out(eesk, eesk);
+ bcm47xx_gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
/* Clock low */
- gpio_out(eesk, 0);
+ bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
}
}
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARPD is not set
CONFIG_B44=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+# CONFIG_GENERIC_PWM is not set
+CONFIG_GPIOLIB=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
+++ /dev/null
-From f6e41db3ee7ead99e1398def222c14893fc265de Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 4 Aug 2011 21:09:48 +0200
-Subject: [PATCH 26/26] bcma: export needed gpio functions
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/driver_chipcommon.c | 5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -81,16 +81,19 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
- {
- return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
-
- u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
-
- u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
-
- u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-@@ -102,11 +105,13 @@ u32 bcma_chipco_gpio_intmask(struct bcma
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
-
- u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
-
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+++ /dev/null
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -151,5 +151,9 @@ static inline int gpio_polarity(unsigned
- return -EINVAL;
- }
-
-+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-+{
-+ return -ENOSYS;
-+}
-
- #endif /* __BCM47XX_GPIO_H */
+++ /dev/null
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -7,6 +7,7 @@
- */
-
- #include <linux/export.h>
-+#include <linux/gpio.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_driver_chipcommon.h>
- #include <linux/ssb/ssb_driver_extif.h>
-@@ -100,3 +101,30 @@ int gpio_to_irq(unsigned gpio)
- return -EINVAL;
- }
- EXPORT_SYMBOL_GPL(gpio_to_irq);
-+
-+/**
-+ * gpio_request_one - request a single GPIO with initial configuration
-+ * @gpio: the GPIO number
-+ * @flags: GPIO configuration as specified by GPIOF_*
-+ * @label: a literal description string of this GPIO
-+ */
-+int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-+{
-+ int err;
-+
-+ err = gpio_request(gpio, label);
-+ if (err)
-+ return err;
-+
-+ if (flags & GPIOF_DIR_IN)
-+ err = gpio_direction_input(gpio);
-+ else
-+ err = gpio_direction_output(gpio,
-+ (flags & GPIOF_INIT_HIGH) ? 1 : 0);
-+
-+ if (err)
-+ gpio_free(gpio);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL_GPL(gpio_request_one);
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -19,6 +19,7 @@
- extern int gpio_request(unsigned gpio, const char *label);
- extern void gpio_free(unsigned gpio);
- extern int gpio_to_irq(unsigned gpio);
-+extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
-
- static inline int gpio_get_value(unsigned gpio)
- {
--- /dev/null
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -136,6 +136,18 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
+ }
+ EXPORT_SYMBOL(ssb_gpio_polarity);
+
++int ssb_gpio_count(struct ssb_bus *bus)
++{
++ if (ssb_chipco_available(&bus->chipco))
++ return SSB_GPIO_CHIPCO_LINES;
++ else if (ssb_extif_available(&bus->extif))
++ return SSB_GPIO_EXTIF_LINES;
++ else
++ SSB_WARN_ON(1);
++ return 0;
++}
++EXPORT_SYMBOL(ssb_gpio_count);
++
+ #ifdef CONFIG_SSB_DRIVER_GIGE
+ static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
+ {
+--- a/include/linux/ssb/ssb_embedded.h
++++ b/include/linux/ssb/ssb_embedded.h
+@@ -7,6 +7,9 @@
+
+ extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+
++#define SSB_GPIO_EXTIF_LINES 5
++#define SSB_GPIO_CHIPCO_LINES 16
++
+ /* Generic GPIO API */
+ u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
+ u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
+@@ -14,5 +17,6 @@ u32 ssb_gpio_outen(struct ssb_bus *bus,
+ u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
+ u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
+ u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
++int ssb_gpio_count(struct ssb_bus *bus);
+
+ #endif /* LINUX_SSB_EMBEDDED_H_ */
--- /dev/null
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -39,6 +39,11 @@ config BCMA_HOST_SOC
+ depends on BCMA_DRIVER_MIPS
+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+
++config BCMA_DRIVER_GPIO
++ bool
++ depends on BCMA_DRIVER_MIPS
++ default y
++
+ config BCMA_SFLASH
+ bool
+ depends on BCMA_DRIVER_MIPS
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -6,6 +6,7 @@ bcma-y += driver_pci.o
+ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
+ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
+ bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
++bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o
+ bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
+ obj-$(CONFIG_BCMA) += bcma.o
+--- /dev/null
++++ b/drivers/bcma/driver_gpio.c
+@@ -0,0 +1,96 @@
++/*
++ * Broadcom specific AMBA
++ * GPIO driver for SoCs
++ *
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/export.h>
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_driver_gpio.h>
++
++u32 bcma_gpio_in(struct bcma_bus *bus, u32 mask)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&bus->gpio_lock, flags);
++ res = bcma_chipco_gpio_in(&bus->drv_cc, mask);
++ spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++ return res;
++}
++EXPORT_SYMBOL(bcma_gpio_in);
++
++u32 bcma_gpio_out(struct bcma_bus *bus, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&bus->gpio_lock, flags);
++ res = bcma_chipco_gpio_out(&bus->drv_cc, mask, value);
++ spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++ return res;
++}
++EXPORT_SYMBOL(bcma_gpio_out);
++
++u32 bcma_gpio_outen(struct bcma_bus *bus, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&bus->gpio_lock, flags);
++ res = bcma_chipco_gpio_outen(&bus->drv_cc, mask, value);
++ spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++ return res;
++}
++EXPORT_SYMBOL(bcma_gpio_outen);
++
++u32 bcma_gpio_control(struct bcma_bus *bus, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&bus->gpio_lock, flags);
++ res = bcma_chipco_gpio_control(&bus->drv_cc, mask, value);
++ spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++ return res;
++}
++EXPORT_SYMBOL(bcma_gpio_control);
++
++u32 bcma_gpio_intmask(struct bcma_bus *bus, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&bus->gpio_lock, flags);
++ res = bcma_chipco_gpio_intmask(&bus->drv_cc, mask, value);
++ spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++ return res;
++}
++EXPORT_SYMBOL(bcma_gpio_intmask);
++
++u32 bcma_gpio_polarity(struct bcma_bus *bus, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&bus->gpio_lock, flags);
++ res = bcma_chipco_gpio_polarity(&bus->drv_cc, mask, value);
++ spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++ return res;
++}
++EXPORT_SYMBOL(bcma_gpio_polarity);
++
++int bcma_gpio_count(struct bcma_bus *bus)
++{
++ return BCMA_GPIO_CC_LINES;
++}
++EXPORT_SYMBOL(bcma_gpio_count);
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -422,6 +422,10 @@ void bcma_init_bus(struct bcma_bus *bus)
+ if (bus->init_done)
+ return;
+
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++ spin_lock_init(&bus->gpio_lock);
++#endif
++
+ INIT_LIST_HEAD(&bus->cores);
+ bus->nr_cores = 0;
+
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -255,6 +255,11 @@ struct bcma_bus {
+ struct bcma_drv_mips drv_mips;
+ struct bcma_drv_gmac_cmn drv_gmac_cmn;
+
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++ /* Lock for GPIO register access. */
++ spinlock_t gpio_lock;
++#endif /* CONFIG_BCMA_DRIVER_GPIO */
++
+ /* We decided to share SPROM struct with SSB as long as we do not need
+ * any hacks for BCMA. This simplifies drivers code. */
+ struct ssb_sprom sprom;
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_gpio.h
+@@ -0,0 +1,17 @@
++#ifndef LINUX_BCMA_DRIVER_GPIO_H_
++#define LINUX_BCMA_DRIVER_GPIO_H_
++
++#include <linux/types.h>
++#include <linux/bcma/bcma.h>
++
++#define BCMA_GPIO_CC_LINES 16
++
++u32 bcma_gpio_in(struct bcma_bus *bus, u32 mask);
++u32 bcma_gpio_out(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_outen(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_control(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_intmask(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_polarity(struct bcma_bus *bus, u32 mask, u32 value);
++int bcma_gpio_count(struct bcma_bus *bus);
++
++#endif /* LINUX_BCMA_DRIVER_GPIO_H_ */
--- /dev/null
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -92,6 +92,7 @@ config ATH79
+
+ config BCM47XX
+ bool "Broadcom BCM47XX based boards"
++ select ARCH_REQUIRE_GPIOLIB
+ select BOOT_RAW
+ select CEVT_R4K
+ select CSRC_R4K
+@@ -100,7 +101,6 @@ config BCM47XX
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+- select GENERIC_GPIO
+ select CFE
+ help
+ Support for BCM47XX based boards
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -4,81 +4,198 @@
+ * for more details.
+ *
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Parts of this file are based on Atheros AR71XX/AR724X/AR913X GPIO
+ */
+
+ #include <linux/export.h>
++#include <linux/gpio.h>
+ #include <linux/ssb/ssb.h>
+-#include <linux/ssb/ssb_driver_chipcommon.h>
+-#include <linux/ssb/ssb_driver_extif.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-#include <asm/mach-bcm47xx/gpio.h>
++#include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_driver_gpio.h>
++
++#include <bcm47xx.h>
+
+-#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
+-static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
+-#else
+-static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
+-#endif
+
+-int gpio_request(unsigned gpio, const char *tag)
++static unsigned long bcm47xx_gpio_count;
++
++/* low level BCM47xx gpio api */
++u32 bcm47xx_gpio_in(u32 mask)
+ {
+ switch (bcm47xx_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+- return -EINVAL;
+-
+- if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+- return -EINVAL;
++ return ssb_gpio_in(&bcm47xx_bus.ssb, mask);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return bcma_gpio_in(&bcm47xx_bus.bcma.bus, mask);
++#endif
++ }
++ return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_in);
+
+- if (test_and_set_bit(gpio, gpio_in_use))
+- return -EBUSY;
++u32 bcm47xx_gpio_out(u32 mask, u32 value)
++{
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return bcma_gpio_out(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++ }
++ return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_out);
+
+- return 0;
++u32 bcm47xx_gpio_outen(u32 mask, u32 value)
++{
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ return ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+- if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+- return -EINVAL;
++ return bcma_gpio_outen(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++ }
++ return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_outen);
+
+- if (test_and_set_bit(gpio, gpio_in_use))
+- return -EBUSY;
++u32 bcm47xx_gpio_control(u32 mask, u32 value)
++{
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return bcma_gpio_control(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++ }
++ return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_control);
+
+- return 0;
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value)
++{
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return bcma_gpio_intmask(&bcm47xx_bus.bcma.bus, mask, value);
+ #endif
+ }
+ return -EINVAL;
+ }
+-EXPORT_SYMBOL(gpio_request);
++EXPORT_SYMBOL(bcm47xx_gpio_intmask);
+
+-void gpio_free(unsigned gpio)
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value)
+ {
+ switch (bcm47xx_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+- return;
++ return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++ case BCM47XX_BUS_TYPE_BCMA:
++ return bcma_gpio_polarity(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++ }
++ return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_polarity);
++
++
++
++static int bcm47xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++ return bcm47xx_gpio_in(1 << gpio);
++}
++
++static void bcm47xx_gpio_set_value(struct gpio_chip *chip,
++ unsigned gpio, int value)
++{
++ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int bcm47xx_gpio_direction_input(struct gpio_chip *chip,
++ unsigned gpio)
++{
++ bcm47xx_gpio_outen(1 << gpio, 0);
++ return 0;
++}
++
++static int bcm47xx_gpio_direction_output(struct gpio_chip *chip,
++ unsigned gpio, int value)
++{
++ /* first set the gpio out value */
++ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
++ /* then set the gpio mode */
++ bcm47xx_gpio_outen(1 << gpio, 1 << gpio);
++ return 0;
++}
++
++static struct gpio_chip bcm47xx_gpio_chip = {
++ .label = "bcm47xx",
++ .get = bcm47xx_gpio_get_value,
++ .set = bcm47xx_gpio_set_value,
++ .direction_input = bcm47xx_gpio_direction_input,
++ .direction_output = bcm47xx_gpio_direction_output,
++ .base = 0,
++};
+
+- if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+- return;
++void __init bcm47xx_gpio_init(void)
++{
++ int err;
+
+- clear_bit(gpio, gpio_in_use);
+- return;
++ switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++ case BCM47XX_BUS_TYPE_SSB:
++ bcm47xx_gpio_count = ssb_gpio_count(&bcm47xx_bus.ssb);
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+- if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+- return;
+-
+- clear_bit(gpio, gpio_in_use);
+- return;
++ bcm47xx_gpio_count = bcma_gpio_count(&bcm47xx_bus.bcma.bus);
+ #endif
+ }
++
++ bcm47xx_gpio_chip.ngpio = bcm47xx_gpio_count;
++
++ err = gpiochip_add(&bcm47xx_gpio_chip);
++ if (err)
++ panic("cannot add BCM47xx GPIO chip, error=%d", err);
+ }
+-EXPORT_SYMBOL(gpio_free);
++
++int gpio_get_value(unsigned gpio)
++{
++ if (gpio < bcm47xx_gpio_count)
++ return bcm47xx_gpio_in(1 << gpio);
++
++ return __gpio_get_value(gpio);
++}
++EXPORT_SYMBOL(gpio_get_value);
++
++void gpio_set_value(unsigned gpio, int value)
++{
++ if (gpio < bcm47xx_gpio_count)
++ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
++ else
++ __gpio_set_value(gpio, value);
++}
++EXPORT_SYMBOL(gpio_set_value);
+
+ int gpio_to_irq(unsigned gpio)
+ {
+@@ -99,4 +216,11 @@ int gpio_to_irq(unsigned gpio)
+ }
+ return -EINVAL;
+ }
+-EXPORT_SYMBOL_GPL(gpio_to_irq);
++EXPORT_SYMBOL(gpio_to_irq);
++
++int irq_to_gpio(unsigned irq)
++{
++ /* FIXME */
++ return -EINVAL;
++}
++EXPORT_SYMBOL(irq_to_gpio);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -344,6 +344,8 @@ void __init plat_mem_setup(void)
+ _machine_restart = bcm47xx_machine_restart;
+ _machine_halt = bcm47xx_machine_halt;
+ pm_power_off = bcm47xx_machine_halt;
++
++ bcm47xx_gpio_init();
+ }
+
+ static int __init bcm47xx_register_bus_complete(void)
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ b/arch/mips/bcm47xx/wgt634u.c
+@@ -133,6 +133,7 @@ static int __init wgt634u_init(void)
+ * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+ */
+ u8 *et0mac;
++ int err;
+
+ if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+ return -ENODEV;
+@@ -146,6 +147,12 @@ static int __init wgt634u_init(void)
+
+ printk(KERN_INFO "WGT634U machine detected.\n");
+
++ err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
++ if (err) {
++ printk(KERN_INFO "Can not register gpio fir reset button\n");
++ return 0;
++ }
++
+ if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+ gpio_interrupt, IRQF_SHARED,
+ "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -56,4 +56,6 @@ void bcm47xx_fill_bcma_boardinfo(struct
+ const char *prefix);
+ #endif
+
++void bcm47xx_gpio_init(void);
++
+ #endif /* __ASM_BCM47XX_H */
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -4,152 +4,39 @@
+ * for more details.
+ *
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+ #ifndef __BCM47XX_GPIO_H
+ #define __BCM47XX_GPIO_H
+
+-#include <linux/ssb/ssb_embedded.h>
+-#include <linux/bcma/bcma.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-
+-#define BCM47XX_EXTIF_GPIO_LINES 5
+-#define BCM47XX_CHIPCO_GPIO_LINES 16
+-
+-extern int gpio_request(unsigned gpio, const char *label);
+-extern void gpio_free(unsigned gpio);
+-extern int gpio_to_irq(unsigned gpio);
++#define ARCH_NR_GPIOS 64
++#include <asm-generic/gpio.h>
+
+-static inline int gpio_get_value(unsigned gpio)
+-{
+- switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+- case BCM47XX_BUS_TYPE_SSB:
+- return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+- case BCM47XX_BUS_TYPE_BCMA:
+- return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
+- 1 << gpio);
+-#endif
+- }
+- return -EINVAL;
+-}
+-
+-#define gpio_get_value_cansleep gpio_get_value
+-
+-static inline void gpio_set_value(unsigned gpio, int value)
+-{
+- switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+- case BCM47XX_BUS_TYPE_SSB:
+- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+- value ? 1 << gpio : 0);
+- return;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+- case BCM47XX_BUS_TYPE_BCMA:
+- bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+- value ? 1 << gpio : 0);
+- return;
+-#endif
+- }
+-}
+-
+-#define gpio_set_value_cansleep gpio_set_value
+-
+-static inline int gpio_cansleep(unsigned gpio)
+-{
+- return 0;
+-}
++/* low level BCM47xx gpio api */
++u32 bcm47xx_gpio_in(u32 mask);
++u32 bcm47xx_gpio_out(u32 mask, u32 value);
++u32 bcm47xx_gpio_outen(u32 mask, u32 value);
++u32 bcm47xx_gpio_control(u32 mask, u32 value);
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value);
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value);
+
+-static inline int gpio_is_valid(unsigned gpio)
+-{
+- return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+-}
++int gpio_to_irq(unsigned gpio);
++int irq_to_gpio(unsigned irq);
++int gpio_get_value(unsigned gpio);
++void gpio_set_value(unsigned gpio, int value);
+
+-
+-static inline int gpio_direction_input(unsigned gpio)
++static inline void gpio_intmask(unsigned gpio, int value)
+ {
+- switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+- case BCM47XX_BUS_TYPE_SSB:
+- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+- return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+- case BCM47XX_BUS_TYPE_BCMA:
+- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+- 0);
+- return 0;
+-#endif
+- }
+- return -EINVAL;
++ bcm47xx_gpio_intmask(1 << gpio, value ? 1 << gpio : 0);
+ }
+
+-static inline int gpio_direction_output(unsigned gpio, int value)
++static inline void gpio_polarity(unsigned gpio, int value)
+ {
+- switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+- case BCM47XX_BUS_TYPE_SSB:
+- /* first set the gpio out value */
+- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+- value ? 1 << gpio : 0);
+- /* then set the gpio mode */
+- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+- return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+- case BCM47XX_BUS_TYPE_BCMA:
+- /* first set the gpio out value */
+- bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+- value ? 1 << gpio : 0);
+- /* then set the gpio mode */
+- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+- 1 << gpio);
+- return 0;
+-#endif
+- }
+- return -EINVAL;
++ bcm47xx_gpio_polarity(1 << gpio, value ? 1 << gpio : 0);
+ }
+
+-static inline int gpio_intmask(unsigned gpio, int value)
+-{
+- switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+- case BCM47XX_BUS_TYPE_SSB:
+- ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
+- value ? 1 << gpio : 0);
+- return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+- case BCM47XX_BUS_TYPE_BCMA:
+- bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
+- 1 << gpio, value ? 1 << gpio : 0);
+- return 0;
+-#endif
+- }
+- return -EINVAL;
+-}
+-
+-static inline int gpio_polarity(unsigned gpio, int value)
+-{
+- switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+- case BCM47XX_BUS_TYPE_SSB:
+- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
+- value ? 1 << gpio : 0);
+- return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+- case BCM47XX_BUS_TYPE_BCMA:
+- bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
+- 1 << gpio, value ? 1 << gpio : 0);
+- return 0;
+-#endif
+- }
+- return -EINVAL;
+-}
+
++#define gpio_cansleep __gpio_cansleep
+
+ #endif /* __BCM47XX_GPIO_H */
-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- a/arch/mips/bcm47xx/wgt634u.c
+++ /dev/null
-@@ -1,170 +0,0 @@
+@@ -1,177 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */
- u8 *et0mac;
+- int err;
-
- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
- return -ENODEV;
-
- printk(KERN_INFO "WGT634U machine detected.\n");
-
+- err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
+- if (err) {
+- printk(KERN_INFO "Can not register gpio fir reset button\n");
+- return 0;
+- }
+-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED,
- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
projects / openwrt / staging / jow.git / commitdiff