--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id: Makefile 5329 2006-10-28 22:43:08Z nico $
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=totd
+PKG_VERSION:=1.5.1
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=ftp://ftp.pasta.cs.uit.no/pub/totd/
+PKG_MD5SUM:=7edaedae9f6aca5912dd6c123582cf08
+PKG_CAT:=zcat
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/totd
+ SECTION:=ipv6
+ CATEGORY:=IPv6
+ DEPENDS:=+kmod-ipv6
+ TITLE:=Small DNS proxy that supports IPv6/IPv4 record translation
+ DESCRIPTION:=\
+ totd is a small DNS proxy nameserver which supports IPv6 and enable IPv6\\\
+ only sites to access IPv4 sites by using some translation mechanism such\\\
+ as NAT-PT, KAME faith, etc...
+ URL:=http://pasta.cs.uit.no/software/totd.html
+endef
+
+define Package/totd/conffiles
+/etc/totd.conf
+endef
+
+# uses GNU configure
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ DESTDIR="$(PKG_INSTALL_DIR)" \
+ CC=$(TARGET_CC) \
+ all
+endef
+
+define Package/totd/install
+ $(INSTALL_DIR) $(1)/usr/sbin/
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/$(PKG_NAME) $(1)/usr/sbin/
+ $(INSTALL_DIR) $(1)/etc/
+ $(INSTALL_CONF) ./files/totd.conf $(1)/etc/
+ $(INSTALL_DIR) $(1)/etc/init.d/
+ $(INSTALL_BIN) ./files/totd.init $(1)/etc/init.d/totd
+endef
+
+$(eval $(call BuildPackage,totd))
--- /dev/null
+; $Id: totd.conf.sample,v 1.9 2003/09/17 15:56:20 dillema Exp $
+; Totd sample configuration file
+; you can have multiple forwarders, totd will always prefer
+; forwarders listed early and only use forwarders listed later
+; if the first ones are unresponsive.
+forwarder 192.168.1.1 port 5353
+; you can have multiple prefixes or even no prefixes at all
+; totd uses them in round-robin fashion
+prefix 3ffe:abcd:1234:9876::
+; the port totd listens on for incoming requests
+port 53
+; the pidfile to use (default: /var/run/totd.pid)
+pidfile /var/run/totd.pid
+; interfaces totd listens on (UDP only for now and not on Linux)
+; If left out totd will only open wildcard sockets.
+; interfaces lo br0
+; 6to4 reverse lookup
+; stf
--- /dev/null
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=60
+BIN=totd
+RUN_D=/var/run
+PID_F=$RUN_D/$BIN.pid
+
+
+start() {
+ mkdir -p $RUN_D
+ $BIN -c /etc/totd.conf
+}
+
+stop() {
+ [ -f $PID_F ] && kill $(cat $PID_F)
+}
+
+restart() {
+ stop
+ sleep 1
+ start
+}
--- /dev/null
+diff -urN totd-1.5.1/Makefile.in totd-1.5.1.new/Makefile.in
+--- totd-1.5.1/Makefile.in 2005-01-31 12:55:14.000000000 +0100
++++ totd-1.5.1.new/Makefile.in 2007-02-26 12:12:05.000000000 +0100
+@@ -19,7 +19,7 @@
+
+ INSTALL = /usr/bin/install
+
+-CFLAGS = @CFLAGS@ @DEFS@ -Werror -Wall -DTOTCONF=\"$(TOT_CONFIG_FILE)\" @OPTFLAGS@ $(INCLUDEPATH)
++CFLAGS = @CFLAGS@ @DEFS@ -Wall -DTOTCONF=\"$(TOT_CONFIG_FILE)\" @OPTFLAGS@ $(INCLUDEPATH)
+
+ # When debugging is enabled by --enable-malloc-debug flag to the configure
+ # script, the @DBMALLOC@ substitution will contain the empty string, thus
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id: Makefile 5329 2006-10-28 22:43:08Z nico $
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=totd
-PKG_VERSION:=1.5.1
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=ftp://ftp.pasta.cs.uit.no/pub/totd/
-PKG_MD5SUM:=7edaedae9f6aca5912dd6c123582cf08
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/totd
- SECTION:=net
- CATEGORY:=Network
- DEPENDS:=+kmod-ipv6
- TITLE:=Small DNS proxy that supports IPv6/IPv4 record translation
- DESCRIPTION:=\
- totd is a small DNS proxy nameserver which supports IPv6 and enable IPv6\\\
- only sites to access IPv4 sites by using some translation mechanism such\\\
- as NAT-PT, KAME faith, etc...
- URL:=http://pasta.cs.uit.no/software/totd.html
-endef
-
-define Package/totd/conffiles
-/etc/totd.conf
-endef
-
-# uses GNU configure
-
-define Build/Compile
- $(MAKE) -C $(PKG_BUILD_DIR) \
- DESTDIR="$(PKG_INSTALL_DIR)" \
- CC=$(TARGET_CC) \
- all
-endef
-
-define Package/totd/install
- $(INSTALL_DIR) $(1)/usr/sbin/
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/$(PKG_NAME) $(1)/usr/sbin/
- $(INSTALL_DIR) $(1)/etc/
- $(INSTALL_CONF) ./files/totd.conf $(1)/etc/
- $(INSTALL_DIR) $(1)/etc/init.d/
- $(INSTALL_BIN) ./files/totd.init $(1)/etc/init.d/totd
-endef
-
-$(eval $(call BuildPackage,totd))
+++ /dev/null
-; $Id: totd.conf.sample,v 1.9 2003/09/17 15:56:20 dillema Exp $
-; Totd sample configuration file
-; you can have multiple forwarders, totd will always prefer
-; forwarders listed early and only use forwarders listed later
-; if the first ones are unresponsive.
-forwarder 192.168.1.1 port 5353
-; you can have multiple prefixes or even no prefixes at all
-; totd uses them in round-robin fashion
-prefix 3ffe:abcd:1234:9876::
-; the port totd listens on for incoming requests
-port 53
-; the pidfile to use (default: /var/run/totd.pid)
-pidfile /var/run/totd.pid
-; interfaces totd listens on (UDP only for now and not on Linux)
-; If left out totd will only open wildcard sockets.
-; interfaces lo br0
-; 6to4 reverse lookup
-; stf
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=60
-BIN=totd
-RUN_D=/var/run
-PID_F=$RUN_D/$BIN.pid
-
-
-start() {
- mkdir -p $RUN_D
- $BIN -c /etc/totd.conf
-}
-
-stop() {
- [ -f $PID_F ] && kill $(cat $PID_F)
-}
-
-restart() {
- stop
- sleep 1
- start
-}
+++ /dev/null
-diff -urN totd-1.5.1/Makefile.in totd-1.5.1.new/Makefile.in
---- totd-1.5.1/Makefile.in 2005-01-31 12:55:14.000000000 +0100
-+++ totd-1.5.1.new/Makefile.in 2007-02-26 12:12:05.000000000 +0100
-@@ -19,7 +19,7 @@
-
- INSTALL = /usr/bin/install
-
--CFLAGS = @CFLAGS@ @DEFS@ -Werror -Wall -DTOTCONF=\"$(TOT_CONFIG_FILE)\" @OPTFLAGS@ $(INCLUDEPATH)
-+CFLAGS = @CFLAGS@ @DEFS@ -Wall -DTOTCONF=\"$(TOT_CONFIG_FILE)\" @OPTFLAGS@ $(INCLUDEPATH)
-
- # When debugging is enabled by --enable-malloc-debug flag to the configure
- # script, the @DBMALLOC@ substitution will contain the empty string, thus