ath79: add support for TP-Link RE350K v1

TP-Link RE350K v1 (FCC ID: TE7RE350K) is a wall-plug AC1200 Wi-Fi range
extender with 'Kasa Smart' support. Device is based on Qualcomm/Atheros
QCA9558 + QCA9882 + AR8035 platform and is available only on US market.

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of flash (SPI NOR)
- 1x 1 Gbps Ethernet (AR8035)
- 2T2R 2.4 GHz (QCA9558), with ext. PA (SE2565T) and LNA (SKY65971-11)
- 2T2R 5 GHz (QCA9882), with ext. PA (SE5003L1-R) and LNA (SKY65981-11)
- 2x U.FL connector on PCB
- 2x dual-band PCB antennas
- 1x LED, 2x dual-color LED (all driven by GPIO)
- 3x button (app config, led, reset)
- 1x mechanical on/off slide switch
- 1x UART (4-pin, 2.54 mm pitch) header on PCB
- 1x JTAG (8-pin, 1.27 mm pitch) header on PCB

Flash instruction:
Use 'factory' image directly in vendor GUI (default IP: 192.168.0.254,
default credentials: admin/admin).

Warning:
This device does not include any kind of recovery mechanism in U-Boot.

Vendor firmware access:
You can access vendor firmware over serial (RX line requires jumper
resistor in R306 place, near XTAL) with: root/sohoadmin credentials.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 075cd8a7edd1e842622a4843dea5c6e658a12d00..c2aa2962f67c52ad678d5dc3460c8255279b79f8 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -1144,6 +1144,38 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "file-system"
        },
 
+       /** Firmware layout for the RE350K v1 */
+       {
+               .id = "RE350K-V1",
+               .vendor = "",
+               .support_list =
+                       "SupportList:\n"
+                       "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
+               .support_trail = '\x00',
+               .soft_ver = NULL,
+
+               /** We're using a dynamic kernel/rootfs split here */
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"firmware", 0x20000, 0xd70000},
+                       {"partition-table", 0xd90000, 0x02000},
+                       {"default-mac", 0xda0000, 0x00020},
+                       {"pin", 0xda0100, 0x00020},
+                       {"product-info", 0xda1100, 0x01000},
+                       {"soft-version", 0xdb0000, 0x01000},
+                       {"support-list", 0xdb1000, 0x01000},
+                       {"profile", 0xdb2000, 0x08000},
+                       {"user-config", 0xdc0000, 0x10000},
+                       {"default-config", 0xdd0000, 0x10000},
+                       {"device-id", 0xde0000, 0x00108},
+                       {"radio", 0xff0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "file-system"
+       },
+
        /** Firmware layout for the RE355 */
        {
                .id = "RE355",