#define RTL838X_LED_GLB_CTRL (0xA000)
#define RTL839X_LED_GLB_CTRL (0x00E4)
#define RTL9302_LED_GLB_CTRL (0xcc00)
-#define RTL930X_LED_GLB_CTRL (0xC400)
+#define RTL930X_LED_GLB_CTRL (0xCC00)
#define RTL931X_LED_GLB_CTRL (0x0600)
#define RTL838X_EXT_GPIO_DIR (0xA08C)
#include <net/netevent.h>
#include <linux/inetdevice.h>
#include <linux/rhashtable.h>
+#include <linux/of_net.h>
#include <asm/mach-rtl838x/mach-rtl83xx.h>
#include "rtl83xx.h"
}
for_each_node_by_name(dn, "port") {
+ phy_interface_t interface;
+ u32 led_set;
+
if (of_property_read_u32(dn, "reg", &pn))
continue;
continue;
}
+ pr_info("%s port %d has phandle\n", __func__, pn);
+ if (of_property_read_u32(phy_node, "sds", &priv->ports[pn].sds_num))
+ priv->ports[pn].sds_num = -1;
+ else {
+ pr_info("%s sds port %d is %d\n", __func__, pn,
+ priv->ports[pn].sds_num);
+ }
+ pr_info("%s port %d has SDS\n", __func__, priv->ports[pn].sds_num);
+
+ if (of_get_phy_mode(dn, &interface))
+ interface = PHY_INTERFACE_MODE_NA;
+ if (interface == PHY_INTERFACE_MODE_HSGMII)
+ priv->ports[pn].is2G5 = true;
+ if (interface == PHY_INTERFACE_MODE_USXGMII)
+ priv->ports[pn].is2G5 = priv->ports[pn].is10G = true;
+ if (interface == PHY_INTERFACE_MODE_10GBASER)
+ priv->ports[pn].is10G = true;
+
+ if (of_property_read_u32(dn, "led-set", &led_set))
+ led_set = 0;
+ priv->ports[pn].led_set = led_set;
+
// Check for the integrated SerDes of the RTL8380M first
if (of_property_read_bool(phy_node, "phy-is-integrated")
&& priv->id == 0x8380 && pn >= 24) {
}
}
- // TODO: Do this needs to come from the .dts
- if (priv->family_id == RTL9300_FAMILY_ID) {
- priv->ports[24].is2G5 = true;
- priv->ports[25].is2G5 = true;
- }
-
/* Disable MAC polling the PHY so that we can start configuration */
priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl);
priv->r->pie_init(priv);
+ priv->r->led_init(priv);
+
return 0;
}
#define RTL931X_ACL_PORT_LOOKUP_CTRL(p) (0x44F8 + (((p) << 2)))
#define RTL930X_PIE_BLK_PHASE_CTRL (0xA5A4)
+#define RTL931X_PIE_BLK_PHASE_CTRL (0x4184)
// PIE actions
#define PIE_ACT_COPY_TO_PORT 2
#define RTL930X_L3_HW_LU_CTRL (0xACC0)
#define RTL930X_L3_IP_ROUTE_CTRL 0xab44
+/* Port LED Control */
+#define RTL930X_LED_PORT_NUM_CTRL(p) (0xCC04 + (((p >> 4) << 2)))
+#define RTL930X_LED_SET0_0_CTRL (0xCC28)
+#define RTL930X_LED_PORT_COPR_SET_SEL_CTRL(p) (0xCC2C + (((p >> 4) << 2)))
+#define RTL930X_LED_PORT_FIB_SET_SEL_CTRL(p) (0xCC34 + (((p >> 4) << 2)))
+#define RTL930X_LED_PORT_COPR_MASK_CTRL (0xCC3C)
+#define RTL930X_LED_PORT_FIB_MASK_CTRL (0xCC40)
+#define RTL930X_LED_PORT_COMBO_MASK_CTRL (0xCC44)
+
+#define RTL931X_LED_PORT_NUM_CTRL(p) (0x0604 + (((p >> 4) << 2)))
+#define RTL931X_LED_SET0_0_CTRL (0x0630)
+#define RTL931X_LED_PORT_COPR_SET_SEL_CTRL(p) (0x0634 + (((p >> 4) << 2)))
+#define RTL931X_LED_PORT_FIB_SET_SEL_CTRL(p) (0x0644 + (((p >> 4) << 2)))
+#define RTL931X_LED_PORT_COPR_MASK_CTRL (0x0654)
+#define RTL931X_LED_PORT_FIB_MASK_CTRL (0x065c)
+#define RTL931X_LED_PORT_COMBO_MASK_CTRL (0x0664)
+
#define MAX_VLANS 4096
#define MAX_LAGS 16
#define MAX_PRIOS 8
bool is10G;
bool is2G5;
int sds_num;
+ int led_set;
const struct dsa_port *dp;
};
void (*set_l3_egress_intf)(int idx, struct rtl838x_l3_intf *intf);
void (*set_distribution_algorithm)(int group, int algoidx, u32 algomask);
void (*set_receive_management_action)(int port, rma_ctrl_t type, action_type_t action);
+ void (*led_init)(struct rtl838x_switch_priv *priv);
};
struct rtl838x_switch_priv {
sw_w32(newmask << l3shift, RTL930X_TRK_HASH_CTRL + (algoidx << 2));
}
+static void rtl930x_led_init(struct rtl838x_switch_priv *priv)
+{
+ int i, pos;
+ u32 v, pm = 0, set;
+ u32 setlen;
+ const __be32 *led_set;
+ char set_name[9];
+ struct device_node *node;
+
+ pr_info("%s called\n", __func__);
+ node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300-leds");
+ if (!node) {
+ pr_info("%s No compatible LED node found\n", __func__);
+ return;
+ }
+
+ for (i= 0; i < priv->cpu_port; i++) {
+ pos = (i << 1) % 32;
+ sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_FIB_SET_SEL_CTRL(i));
+ sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_COPR_SET_SEL_CTRL(i));
+
+ if (!priv->ports[i].phy)
+ continue;
+
+ v = 0x1;
+ if (priv->ports[i].is10G)
+ v = 0x3;
+ if (priv->ports[i].phy_is_integrated)
+ v = 0x1;
+ sw_w32_mask(0x3 << pos, v << pos, RTL930X_LED_PORT_NUM_CTRL(i));
+
+ pm |= BIT(i);
+
+ set = priv->ports[i].led_set;
+ sw_w32_mask(0, set << pos, RTL930X_LED_PORT_COPR_SET_SEL_CTRL(i));
+ sw_w32_mask(0, set << pos, RTL930X_LED_PORT_FIB_SET_SEL_CTRL(i));
+ }
+
+ for (i = 0; i < 4; i++) {
+ sprintf(set_name, "led_set%d", i);
+ led_set = of_get_property(node, set_name, &setlen);
+ if (!led_set || setlen != 16)
+ break;
+ v = be32_to_cpup(led_set) << 16 | be32_to_cpup(led_set + 1);
+ sw_w32(v, RTL930X_LED_SET0_0_CTRL - 4 - i * 8);
+ v = be32_to_cpup(led_set + 2) << 16 | be32_to_cpup(led_set + 3);
+ sw_w32(v, RTL930X_LED_SET0_0_CTRL - i * 8);
+ }
+
+ // Set LED mode to serial (0x1)
+ sw_w32_mask(0x3, 0x1, RTL930X_LED_GLB_CTRL);
+
+ // Set port type masks
+ sw_w32(pm, RTL930X_LED_PORT_COPR_MASK_CTRL);
+ sw_w32(pm, RTL930X_LED_PORT_FIB_MASK_CTRL);
+ sw_w32(pm, RTL930X_LED_PORT_COMBO_MASK_CTRL);
+
+ for (i = 0; i < 24; i++)
+ pr_info("%s %08x: %08x\n",__func__, 0xbb00cc00 + i * 4, sw_r32(0xcc00 + i * 4));
+}
+
const struct rtl838x_reg rtl930x_reg = {
.mask_port_reg_be = rtl838x_mask_port_reg,
.set_port_reg_be = rtl838x_set_port_reg,
.set_l3_router_mac = rtl930x_set_l3_router_mac,
.set_l3_egress_intf = rtl930x_set_l3_egress_intf,
.set_distribution_algorithm = rtl930x_set_distribution_algorithm,
+ .led_init = rtl930x_led_init,
};
// 4: Ingress Flow Table 3, 5: Egress flow table 0
for (i = 0; i < priv->n_pie_blocks; i++) {
int pos = (i % 10) * 3;
- u32 r = RTL930X_PIE_BLK_PHASE_CTRL + 4 * (i / 10);
+ u32 r = RTL931X_PIE_BLK_PHASE_CTRL + 4 * (i / 10);
if (i < priv->n_pie_blocks / 2)
sw_w32_mask(0x7 << pos, 0, r);
sw_w32(newmask << l3shift, RTL931X_TRK_HASH_CTRL + (algoidx << 2));
}
+static void rtl931x_led_init(struct rtl838x_switch_priv *priv)
+{
+ int i, pos;
+ u32 v, set;
+ u64 pm_copper = 0, pm_fiber = 0;
+ u32 setlen;
+ const __be32 *led_set;
+ char set_name[9];
+ struct device_node *node;
+
+ pr_info("%s called\n", __func__);
+ node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300-leds");
+ if (!node) {
+ pr_info("%s No compatible LED node found\n", __func__);
+ return;
+ }
+
+ for (i= 0; i < priv->cpu_port; i++) {
+ pos = (i << 1) % 32;
+ sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_FIB_SET_SEL_CTRL(i));
+ sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i));
+
+ if (!priv->ports[i].phy)
+ continue;
+
+ v = 0x1; // Found on the EdgeCore, but we do not have any HW description
+ sw_w32_mask(0x3 << pos, v << pos, RTL931X_LED_PORT_NUM_CTRL(i));
+
+ if (priv->ports[i].phy_is_integrated)
+ pm_fiber |= BIT_ULL(i);
+ else
+ pm_copper |= BIT_ULL(i);
+
+ set = priv->ports[i].led_set;
+ sw_w32_mask(0, set << pos, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i));
+ sw_w32_mask(0, set << pos, RTL931X_LED_PORT_FIB_SET_SEL_CTRL(i));
+ }
+
+ for (i = 0; i < 4; i++) {
+ sprintf(set_name, "led_set%d", i);
+ pr_info(">%s<\n", set_name);
+ led_set = of_get_property(node, set_name, &setlen);
+ if (!led_set || setlen != 16)
+ break;
+ v = be32_to_cpup(led_set) << 16 | be32_to_cpup(led_set + 1);
+ sw_w32(v, RTL931X_LED_SET0_0_CTRL - 4 - i * 8);
+ v = be32_to_cpup(led_set + 2) << 16 | be32_to_cpup(led_set + 3);
+ sw_w32(v, RTL931X_LED_SET0_0_CTRL - i * 8);
+ }
+
+ // Set LED mode to serial (0x1)
+ sw_w32_mask(0x3, 0x1, RTL931X_LED_GLB_CTRL);
+
+ rtl839x_set_port_reg_le(pm_copper, RTL931X_LED_PORT_COPR_MASK_CTRL);
+ rtl839x_set_port_reg_le(pm_fiber, RTL931X_LED_PORT_FIB_MASK_CTRL);
+ rtl839x_set_port_reg_le(pm_copper | pm_fiber, RTL931X_LED_PORT_COMBO_MASK_CTRL);
+
+ for (i = 0; i < 32; i++)
+ pr_info("%s %08x: %08x\n",__func__, 0xbb000600 + i * 4, sw_r32(0x0600 + i * 4));
+
+}
+
const struct rtl838x_reg rtl931x_reg = {
.mask_port_reg_be = rtl839x_mask_port_reg_be,
.set_port_reg_be = rtl839x_set_port_reg_be,
.pie_rule_rm = rtl931x_pie_rule_rm,
.l2_learning_setup = rtl931x_l2_learning_setup,
.l3_setup = rtl931x_l3_setup,
+ .led_init = rtl931x_led_init,
};
projects / openwrt / staging / jow.git / commitdiff