F: drivers/gpio/mscc_sgpio.c
F: drivers/spi/mscc_bb_spi.c
F: include/configs/vcoreiii.h
+F: drivers/pinctrl/mscc/
MIPS JZ4780
M: Ezequiel Garcia <ezequiel@collabora.com>
help
Support pin multiplexing and pin configuration control on
Microsemi luton SoCs.
+
+config PINCTRL_MSCC_JR2
+ depends on SOC_JR2 && PINCTRL_FULL && OF_CONTROL
+ select PINCTRL_MSCC
+ default y
+ bool "Microsemi jr2 family pin control driver"
+ help
+ Support pin multiplexing and pin configuration control on
+ Microsemi jr2 SoCs.
obj-y += mscc-common.o
obj-$(CONFIG_PINCTRL_MSCC_OCELOT) += pinctrl-ocelot.o
obj-$(CONFIG_PINCTRL_MSCC_LUTON) += pinctrl-luton.o
+obj-$(CONFIG_PINCTRL_MSCC_JR2) += pinctrl-jr2.o
#include <linux/io.h>
#include "mscc-common.h"
-#define MSCC_GPIO_OUT_SET 0x0
-#define MSCC_GPIO_OUT_CLR 0x4
-#define MSCC_GPIO_OUT 0x8
-#define MSCC_GPIO_IN 0xc
-#define MSCC_GPIO_OE 0x10
-#define MSCC_GPIO_INTR 0x14
-#define MSCC_GPIO_INTR_ENA 0x18
-#define MSCC_GPIO_INTR_IDENT 0x1c
-#define MSCC_GPIO_ALT0 0x20
-#define MSCC_GPIO_ALT1 0x24
+static void mscc_writel(unsigned int offset, void *addr)
+{
+ if (offset < 32)
+ writel(BIT(offset), addr);
+ else
+ writel(BIT(offset % 32), addr + 4);
+}
+
+static unsigned int mscc_readl(unsigned int offset, void *addr)
+{
+ if (offset < 32)
+ return readl(addr);
+ else
+ return readl(addr + 4);
+}
+
+static void mscc_setbits(unsigned int offset, void *addr)
+{
+ if (offset < 32)
+ writel(readl(addr) | BIT(offset), addr);
+ else
+ writel(readl(addr + 4) | BIT(offset % 32), addr + 4);
+}
+
+static void mscc_clrbits(unsigned int offset, void *addr)
+{
+ if (offset < 32)
+ writel(readl(addr) & ~BIT(offset), addr);
+ else
+ writel(readl(addr + 4) & ~BIT(offset % 32), addr + 4);
+}
static int mscc_get_functions_count(struct udevice *dev)
{
{
struct mscc_pinctrl *info = dev_get_priv(dev);
struct mscc_pin_caps *pin = info->mscc_pins[pin_selector].drv_data;
- int f;
+ int f, offset, regoff;
f = mscc_pin_function_idx(pin_selector, selector, info->mscc_pins);
if (f < 0)
* This is racy because both registers can't be updated at the same time
* but it doesn't matter much for now.
*/
+ offset = pin->pin;
+ regoff = info->mscc_gpios[MSCC_GPIO_ALT0];
+ if (offset >= 32) {
+ offset = offset % 32;
+ regoff = info->mscc_gpios[MSCC_GPIO_ALT1];
+ }
+
if (f & BIT(0))
- setbits_le32(info->regs + MSCC_GPIO_ALT0, BIT(pin->pin));
+ mscc_setbits(offset, info->regs + regoff);
else
- clrbits_le32(info->regs + MSCC_GPIO_ALT0, BIT(pin->pin));
+ mscc_clrbits(offset, info->regs + regoff);
if (f & BIT(1))
- setbits_le32(info->regs + MSCC_GPIO_ALT1, BIT(pin->pin - 1));
+ mscc_setbits(offset, info->regs + regoff + 4);
else
- clrbits_le32(info->regs + MSCC_GPIO_ALT1, BIT(pin->pin - 1));
+ mscc_clrbits(offset, info->regs + regoff + 4);
return 0;
}
}
info->func[f].ngroups = npins;
- info->func[f].groups = devm_kzalloc(dev, npins *
- sizeof(char *), GFP_KERNEL);
+ info->func[f].groups = devm_kzalloc(dev, npins * sizeof(char *),
+ GFP_KERNEL);
if (!info->func[f].groups)
return -ENOMEM;
struct mscc_pinctrl *info = dev_get_priv(dev->parent);
unsigned int val;
- val = readl(info->regs + MSCC_GPIO_IN);
+ if (mscc_readl(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]) &
+ BIT(offset % 32))
+ val = mscc_readl(offset,
+ info->regs + info->mscc_gpios[MSCC_GPIO_OUT]);
+ else
+ val = mscc_readl(offset,
+ info->regs + info->mscc_gpios[MSCC_GPIO_IN]);
- return !!(val & BIT(offset));
+ return !!(val & BIT(offset % 32));
}
static int mscc_gpio_set(struct udevice *dev, unsigned int offset, int value)
struct mscc_pinctrl *info = dev_get_priv(dev->parent);
if (value)
- writel(BIT(offset), info->regs + MSCC_GPIO_OUT_SET);
+ mscc_writel(offset,
+ info->regs + info->mscc_gpios[MSCC_GPIO_OUT_SET]);
else
- writel(BIT(offset), info->regs + MSCC_GPIO_OUT_CLR);
+ mscc_writel(offset,
+ info->regs + info->mscc_gpios[MSCC_GPIO_OUT_CLR]);
return 0;
}
struct mscc_pinctrl *info = dev_get_priv(dev->parent);
unsigned int val;
- val = readl(info->regs + MSCC_GPIO_OE);
+ val = mscc_readl(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]);
- return (val & BIT(offset)) ? GPIOF_OUTPUT : GPIOF_INPUT;
+ return (val & BIT(offset % 32)) ? GPIOF_OUTPUT : GPIOF_INPUT;
}
static int mscc_gpio_direction_input(struct udevice *dev, unsigned int offset)
{
struct mscc_pinctrl *info = dev_get_priv(dev->parent);
- clrbits_le32(info->regs + MSCC_GPIO_OE, BIT(offset));
+ mscc_clrbits(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]);
return 0;
}
{
struct mscc_pinctrl *info = dev_get_priv(dev->parent);
- setbits_le32(info->regs + MSCC_GPIO_OE, BIT(offset));
+ mscc_setbits(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]);
return mscc_gpio_set(dev, offset, value);
}
int mscc_pinctrl_probe(struct udevice *dev, int num_func,
const struct mscc_pin_data *mscc_pins, int num_pins,
- char *const *function_names)
+ char * const *function_names,
+ const unsigned long *mscc_gpios)
{
struct mscc_pinctrl *priv = dev_get_priv(dev);
int ret;
priv->mscc_pins = mscc_pins;
priv->num_pins = num_pins;
priv->function_names = function_names;
+ priv->mscc_gpios = mscc_gpios;
ret = mscc_pinctrl_register(dev, priv);
return ret;
#define MSCC_FUNC_PER_PIN 4
+enum mscc_regs_gpio {
+ MSCC_GPIO_OUT_SET,
+ MSCC_GPIO_OUT_CLR,
+ MSCC_GPIO_OUT,
+ MSCC_GPIO_IN,
+ MSCC_GPIO_OE,
+ MSCC_GPIO_INTR,
+ MSCC_GPIO_INTR_ENA,
+ MSCC_GPIO_INTR_IDENT,
+ MSCC_GPIO_ALT0,
+ MSCC_GPIO_ALT1,
+};
+
struct mscc_pin_caps {
unsigned int pin;
unsigned char functions[MSCC_FUNC_PER_PIN];
const struct mscc_pin_data *mscc_pins;
int num_pins;
char * const *function_names;
+ const unsigned long *mscc_gpios;
};
int mscc_pinctrl_probe(struct udevice *dev, int num_func,
const struct mscc_pin_data *mscc_pins, int num_pins,
- char * const *function_names);
+ char * const *function_names,
+ const unsigned long *mscc_gpios);
const struct pinctrl_ops mscc_pinctrl_ops;
const struct dm_gpio_ops mscc_gpio_ops;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi SoCs pinctrl driver
+ *
+ * Author: <horatiu.vultur@microchip.com>
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+#include <config.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <asm/system.h>
+#include "mscc-common.h"
+
+enum {
+ FUNC_NONE,
+ FUNC_GPIO,
+ FUNC_IRQ0_IN,
+ FUNC_IRQ0_OUT,
+ FUNC_IRQ1_IN,
+ FUNC_IRQ1_OUT,
+ FUNC_MIIM1,
+ FUNC_MIIM2,
+ FUNC_PCI_WAKE,
+ FUNC_PTP0,
+ FUNC_PTP1,
+ FUNC_PTP2,
+ FUNC_PTP3,
+ FUNC_PWM,
+ FUNC_RECO_CLK0,
+ FUNC_RECO_CLK1,
+ FUNC_SFP0,
+ FUNC_SFP1,
+ FUNC_SFP2,
+ FUNC_SFP3,
+ FUNC_SFP4,
+ FUNC_SFP5,
+ FUNC_SFP6,
+ FUNC_SFP7,
+ FUNC_SFP8,
+ FUNC_SFP9,
+ FUNC_SFP10,
+ FUNC_SFP11,
+ FUNC_SFP12,
+ FUNC_SFP13,
+ FUNC_SFP14,
+ FUNC_SFP15,
+ FUNC_SG0,
+ FUNC_SG1,
+ FUNC_SG2,
+ FUNC_SI,
+ FUNC_TACHO,
+ FUNC_TWI,
+ FUNC_TWI2,
+ FUNC_TWI_SCL_M,
+ FUNC_UART,
+ FUNC_UART2,
+ FUNC_MAX
+};
+
+static char * const jr2_function_names[] = {
+ [FUNC_NONE] = "none",
+ [FUNC_GPIO] = "gpio",
+ [FUNC_IRQ0_IN] = "irq0_in",
+ [FUNC_IRQ0_OUT] = "irq0_out",
+ [FUNC_IRQ1_IN] = "irq1_in",
+ [FUNC_IRQ1_OUT] = "irq1_out",
+ [FUNC_MIIM1] = "miim1",
+ [FUNC_MIIM2] = "miim2",
+ [FUNC_PCI_WAKE] = "pci_wake",
+ [FUNC_PTP0] = "ptp0",
+ [FUNC_PTP1] = "ptp1",
+ [FUNC_PTP2] = "ptp2",
+ [FUNC_PTP3] = "ptp3",
+ [FUNC_PWM] = "pwm",
+ [FUNC_RECO_CLK0] = "reco_clk0",
+ [FUNC_RECO_CLK1] = "reco_clk1",
+ [FUNC_SFP0] = "sfp0",
+ [FUNC_SFP1] = "sfp1",
+ [FUNC_SFP2] = "sfp2",
+ [FUNC_SFP3] = "sfp3",
+ [FUNC_SFP4] = "sfp4",
+ [FUNC_SFP5] = "sfp5",
+ [FUNC_SFP6] = "sfp6",
+ [FUNC_SFP7] = "sfp7",
+ [FUNC_SFP8] = "sfp8",
+ [FUNC_SFP9] = "sfp9",
+ [FUNC_SFP10] = "sfp10",
+ [FUNC_SFP11] = "sfp11",
+ [FUNC_SFP12] = "sfp12",
+ [FUNC_SFP13] = "sfp13",
+ [FUNC_SFP14] = "sfp14",
+ [FUNC_SFP15] = "sfp15",
+ [FUNC_SG0] = "sg0",
+ [FUNC_SG1] = "sg1",
+ [FUNC_SG2] = "sg2",
+ [FUNC_SI] = "si",
+ [FUNC_TACHO] = "tacho",
+ [FUNC_TWI] = "twi",
+ [FUNC_TWI2] = "twi2",
+ [FUNC_TWI_SCL_M] = "twi_scl_m",
+ [FUNC_UART] = "uart",
+ [FUNC_UART2] = "uart2",
+};
+
+#define JR2_P(p, f0, f1) \
+static struct mscc_pin_caps jr2_pin_##p = { \
+ .pin = p, \
+ .functions = { \
+ FUNC_GPIO, FUNC_##f0, FUNC_##f1, FUNC_NONE \
+ }, \
+}
+
+JR2_P(0, SG0, NONE);
+JR2_P(1, SG0, NONE);
+JR2_P(2, SG0, NONE);
+JR2_P(3, SG0, NONE);
+JR2_P(4, SG1, NONE);
+JR2_P(5, SG1, NONE);
+JR2_P(6, IRQ0_IN, IRQ0_OUT);
+JR2_P(7, IRQ1_IN, IRQ1_OUT);
+JR2_P(8, PTP0, NONE);
+JR2_P(9, PTP1, NONE);
+JR2_P(10, UART, NONE);
+JR2_P(11, UART, NONE);
+JR2_P(12, SG1, NONE);
+JR2_P(13, SG1, NONE);
+JR2_P(14, TWI, TWI_SCL_M);
+JR2_P(15, TWI, NONE);
+JR2_P(16, SI, TWI_SCL_M);
+JR2_P(17, SI, TWI_SCL_M);
+JR2_P(18, SI, TWI_SCL_M);
+JR2_P(19, PCI_WAKE, NONE);
+JR2_P(20, IRQ0_OUT, TWI_SCL_M);
+JR2_P(21, IRQ1_OUT, TWI_SCL_M);
+JR2_P(22, TACHO, NONE);
+JR2_P(23, PWM, NONE);
+JR2_P(24, UART2, NONE);
+JR2_P(25, UART2, SI);
+JR2_P(26, PTP2, SI);
+JR2_P(27, PTP3, SI);
+JR2_P(28, TWI2, SI);
+JR2_P(29, TWI, SI);
+JR2_P(30, SG2, SI);
+JR2_P(31, SG2, SI);
+JR2_P(32, SG2, SI);
+JR2_P(33, SG2, SI);
+JR2_P(34, NONE, TWI_SCL_M);
+JR2_P(35, NONE, TWI_SCL_M);
+JR2_P(36, NONE, TWI_SCL_M);
+JR2_P(37, NONE, TWI_SCL_M);
+JR2_P(38, NONE, TWI_SCL_M);
+JR2_P(39, NONE, TWI_SCL_M);
+JR2_P(40, NONE, TWI_SCL_M);
+JR2_P(41, NONE, TWI_SCL_M);
+JR2_P(42, NONE, TWI_SCL_M);
+JR2_P(43, NONE, TWI_SCL_M);
+JR2_P(44, NONE, SFP8);
+JR2_P(45, NONE, SFP9);
+JR2_P(46, NONE, SFP10);
+JR2_P(47, NONE, SFP11);
+JR2_P(48, SFP0, NONE);
+JR2_P(49, SFP1, SI);
+JR2_P(50, SFP2, SI);
+JR2_P(51, SFP3, SI);
+JR2_P(52, SFP4, NONE);
+JR2_P(53, SFP5, NONE);
+JR2_P(54, SFP6, NONE);
+JR2_P(55, SFP7, NONE);
+JR2_P(56, MIIM1, SFP12);
+JR2_P(57, MIIM1, SFP13);
+JR2_P(58, MIIM2, SFP14);
+JR2_P(59, MIIM2, SFP15);
+JR2_P(60, NONE, NONE);
+JR2_P(61, NONE, NONE);
+JR2_P(62, NONE, NONE);
+JR2_P(63, NONE, NONE);
+
+#define JR2_PIN(n) { \
+ .name = "GPIO_"#n, \
+ .drv_data = &jr2_pin_##n \
+}
+
+static const struct mscc_pin_data jr2_pins[] = {
+ JR2_PIN(0),
+ JR2_PIN(1),
+ JR2_PIN(2),
+ JR2_PIN(3),
+ JR2_PIN(4),
+ JR2_PIN(5),
+ JR2_PIN(6),
+ JR2_PIN(7),
+ JR2_PIN(8),
+ JR2_PIN(9),
+ JR2_PIN(10),
+ JR2_PIN(11),
+ JR2_PIN(12),
+ JR2_PIN(13),
+ JR2_PIN(14),
+ JR2_PIN(15),
+ JR2_PIN(16),
+ JR2_PIN(17),
+ JR2_PIN(18),
+ JR2_PIN(19),
+ JR2_PIN(20),
+ JR2_PIN(21),
+ JR2_PIN(22),
+ JR2_PIN(23),
+ JR2_PIN(24),
+ JR2_PIN(25),
+ JR2_PIN(26),
+ JR2_PIN(27),
+ JR2_PIN(28),
+ JR2_PIN(29),
+ JR2_PIN(30),
+ JR2_PIN(31),
+ JR2_PIN(32),
+ JR2_PIN(33),
+ JR2_PIN(34),
+ JR2_PIN(35),
+ JR2_PIN(36),
+ JR2_PIN(37),
+ JR2_PIN(38),
+ JR2_PIN(39),
+ JR2_PIN(40),
+ JR2_PIN(41),
+ JR2_PIN(42),
+ JR2_PIN(43),
+ JR2_PIN(44),
+ JR2_PIN(45),
+ JR2_PIN(46),
+ JR2_PIN(47),
+ JR2_PIN(48),
+ JR2_PIN(49),
+ JR2_PIN(50),
+ JR2_PIN(51),
+ JR2_PIN(52),
+ JR2_PIN(53),
+ JR2_PIN(54),
+ JR2_PIN(55),
+ JR2_PIN(56),
+ JR2_PIN(57),
+ JR2_PIN(58),
+ JR2_PIN(59),
+ JR2_PIN(60),
+ JR2_PIN(61),
+ JR2_PIN(62),
+ JR2_PIN(63),
+};
+
+static const unsigned long jr2_gpios[] = {
+ [MSCC_GPIO_OUT_SET] = 0x00,
+ [MSCC_GPIO_OUT_CLR] = 0x08,
+ [MSCC_GPIO_OUT] = 0x10,
+ [MSCC_GPIO_IN] = 0x18,
+ [MSCC_GPIO_OE] = 0x20,
+ [MSCC_GPIO_INTR] = 0x28,
+ [MSCC_GPIO_INTR_ENA] = 0x30,
+ [MSCC_GPIO_INTR_IDENT] = 0x38,
+ [MSCC_GPIO_ALT0] = 0x40,
+ [MSCC_GPIO_ALT1] = 0x48,
+};
+
+static int jr2_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv;
+
+ uc_priv = dev_get_uclass_priv(dev);
+ uc_priv->bank_name = "jr2-gpio";
+ uc_priv->gpio_count = ARRAY_SIZE(jr2_pins);
+
+ return 0;
+}
+
+static struct driver jr2_gpio_driver = {
+ .name = "jr2-gpio",
+ .id = UCLASS_GPIO,
+ .probe = jr2_gpio_probe,
+ .ops = &mscc_gpio_ops,
+};
+
+static int jr2_pinctrl_probe(struct udevice *dev)
+{
+ int ret;
+
+ ret = mscc_pinctrl_probe(dev, FUNC_MAX, jr2_pins,
+ ARRAY_SIZE(jr2_pins),
+ jr2_function_names,
+ jr2_gpios);
+
+ if (ret)
+ return ret;
+
+ ret = device_bind(dev, &jr2_gpio_driver, "jr2-gpio", NULL,
+ dev_of_offset(dev), NULL);
+
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct udevice_id jr2_pinctrl_of_match[] = {
+ { .compatible = "mscc,jaguar2-pinctrl" },
+ {},
+};
+
+U_BOOT_DRIVER(jr2_pinctrl) = {
+ .name = "jr2-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(jr2_pinctrl_of_match),
+ .probe = jr2_pinctrl_probe,
+ .priv_auto_alloc_size = sizeof(struct mscc_pinctrl),
+ .ops = &mscc_pinctrl_ops,
+};
LUTON_PIN(31),
};
+static const unsigned long luton_gpios[] = {
+ [MSCC_GPIO_OUT_SET] = 0x00,
+ [MSCC_GPIO_OUT_CLR] = 0x04,
+ [MSCC_GPIO_OUT] = 0x08,
+ [MSCC_GPIO_IN] = 0x0c,
+ [MSCC_GPIO_OE] = 0x10,
+ [MSCC_GPIO_INTR] = 0x14,
+ [MSCC_GPIO_INTR_ENA] = 0x18,
+ [MSCC_GPIO_INTR_IDENT] = 0x1c,
+ [MSCC_GPIO_ALT0] = 0x20,
+ [MSCC_GPIO_ALT1] = 0x24,
+};
+
static int luton_gpio_probe(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv;
int ret;
ret = mscc_pinctrl_probe(dev, FUNC_MAX, luton_pins,
- ARRAY_SIZE(luton_pins), luton_function_names);
+ ARRAY_SIZE(luton_pins), luton_function_names,
+ luton_gpios);
if (ret)
return ret;
OCELOT_PIN(21),
};
+static const unsigned long ocelot_gpios[] = {
+ [MSCC_GPIO_OUT_SET] = 0x00,
+ [MSCC_GPIO_OUT_CLR] = 0x04,
+ [MSCC_GPIO_OUT] = 0x08,
+ [MSCC_GPIO_IN] = 0x0c,
+ [MSCC_GPIO_OE] = 0x10,
+ [MSCC_GPIO_INTR] = 0x14,
+ [MSCC_GPIO_INTR_ENA] = 0x18,
+ [MSCC_GPIO_INTR_IDENT] = 0x1c,
+ [MSCC_GPIO_ALT0] = 0x20,
+ [MSCC_GPIO_ALT1] = 0x24,
+};
+
static int ocelot_gpio_probe(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv;
ret = mscc_pinctrl_probe(dev, FUNC_MAX, ocelot_pins,
ARRAY_SIZE(ocelot_pins),
- ocelot_function_names);
+ ocelot_function_names,
+ ocelot_gpios);
if (ret)
return ret;
projects / project / bcm63xx / u-boot.git / commitdiff