--- /dev/null
+/*
+ * D-Link DIR-615 rev C1 board support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "devices.h"
+#include "dev-m25p80.h"
+
+#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */
+#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */
+#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */
+
+/* buttons may need refinement */
+
+#define DIR_615C1_GPIO_BTN_WPS 12
+#define DIR_615C1_GPIO_BTN_RESET 21
+
+#define DIR_615C1_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir_615c1_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = 0x020000,
+ .size = 0x010000,
+ } , {
+ .name = "kernel",
+ .offset = 0x030000,
+ .size = 0x0d0000,
+ } , {
+ .name = "rootfs",
+ .offset = 0x100000,
+ .size = 0x2f0000,
+ } , {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = 0x030000,
+ .size = 0x3c0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir_615c1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = dir_615c1_partitions,
+ .nr_parts = ARRAY_SIZE(dir_615c1_partitions),
+#endif
+};
+
+static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
+ {
+ .name = "dir-615c1:orange:status",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "dir-615c1:blue:wps",
+ .gpio = DIR_615C1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ }, {
+ .name = "dir-615c1:green:wan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WAN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615c1:green:wancpu",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU,
+ .active_low = 1,
+ }, {
+ .name = "dir-615c1:green:wlan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615c1:green:status",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "dir-615c1:orange:wan",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN,
+ .active_low = 1,
+ }
+
+};
+
+static struct gpio_button dir_615c1_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = DIR_615C1_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = DIR_615C1_GPIO_BTN_WPS,
+ }
+};
+
+static void __init dir_615c1_setup(void)
+{
+ ar71xx_add_device_mdio(0x0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.phy_mask = 0xf;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = 0x10;
+
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_eth(1);
+
+ ar71xx_add_device_m25p80(&dir_615c1_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
+ dir_615c1_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615c1_gpio_buttons),
+ dir_615c1_gpio_buttons);
+
+ ar91xx_add_device_wmac();
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "D-Link DIR-615 rev. C1", dir_615c1_setup);
projects / openwrt / svn-archive / archive.git / commitdiff