-diff -Nur openswan-2.4.0.orig/programs/loggerfix openswan-2.4.0/programs/loggerfix
---- openswan-2.4.0.orig/programs/loggerfix 1970-01-01 01:00:00.000000000 +0100
-+++ openswan-2.4.0/programs/loggerfix 2005-09-29 13:44:43.325458750 +0200
+diff -Nur openswan-2.4.5rc5/programs/loggerfix openswan-2.4.5rc5.patched/programs/loggerfix
+--- openswan-2.4.5rc5/programs/loggerfix 1970-01-01 01:00:00.000000000 +0100
++++ openswan-2.4.5rc5.patched/programs/loggerfix 2006-03-29 01:20:44.000000000 +0200
@@ -0,0 +1,5 @@
+#!/bin/sh
+# use filename instead of /dev/null to log, but dont log to flash or ram
+# pref. log to nfs mount
+echo "$*" >> /dev/null
+exit 0
-diff -Nur openswan-2.4.0.orig/programs/look/look.in openswan-2.4.0/programs/look/look.in
---- openswan-2.4.0.orig/programs/look/look.in 2005-08-18 16:10:09.000000000 +0200
-+++ openswan-2.4.0/programs/look/look.in 2005-09-29 13:44:49.537847000 +0200
+diff -Nur openswan-2.4.5rc5/programs/look/look.in openswan-2.4.5rc5.patched/programs/look/look.in
+--- openswan-2.4.5rc5/programs/look/look.in 2005-08-18 16:10:09.000000000 +0200
++++ openswan-2.4.5rc5.patched/programs/look/look.in 2006-03-29 01:20:44.000000000 +0200
@@ -84,7 +84,7 @@
then
pat="$pat|$defaultroutephys\$|$defaultroutevirt\$"
do
pat="$pat|$i\$"
done
-diff -Nur openswan-2.4.0.orig/programs/manual/manual.in openswan-2.4.0/programs/manual/manual.in
---- openswan-2.4.0.orig/programs/manual/manual.in 2005-04-18 00:57:12.000000000 +0200
-+++ openswan-2.4.0/programs/manual/manual.in 2005-09-29 13:44:52.446028750 +0200
+diff -Nur openswan-2.4.5rc5/programs/manual/manual.in openswan-2.4.5rc5.patched/programs/manual/manual.in
+--- openswan-2.4.5rc5/programs/manual/manual.in 2005-11-18 06:18:33.000000000 +0100
++++ openswan-2.4.5rc5.patched/programs/manual/manual.in 2006-03-29 01:20:44.000000000 +0200
@@ -104,7 +104,7 @@
sub(/:/, " ", $0)
if (interf != "")
;;
esac
-diff -Nur openswan-2.4.0.orig/programs/_plutorun/_plutorun.in openswan-2.4.0/programs/_plutorun/_plutorun.in
---- openswan-2.4.0.orig/programs/_plutorun/_plutorun.in 2005-04-21 23:57:16.000000000 +0200
-+++ openswan-2.4.0/programs/_plutorun/_plutorun.in 2005-09-29 13:44:53.442091000 +0200
+diff -Nur openswan-2.4.5rc5/programs/_plutorun/_plutorun.in openswan-2.4.5rc5.patched/programs/_plutorun/_plutorun.in
+--- openswan-2.4.5rc5/programs/_plutorun/_plutorun.in 2006-01-06 00:45:00.000000000 +0100
++++ openswan-2.4.5rc5.patched/programs/_plutorun/_plutorun.in 2006-03-29 01:20:44.000000000 +0200
@@ -147,7 +147,7 @@
exit 1
fi
then
echo Cannot write to directory to create \"$stderrlog\".
exit 1
-diff -Nur openswan-2.4.0.orig/programs/_realsetup/_realsetup.in openswan-2.4.0/programs/_realsetup/_realsetup.in
---- openswan-2.4.0.orig/programs/_realsetup/_realsetup.in 2005-07-28 02:23:48.000000000 +0200
-+++ openswan-2.4.0/programs/_realsetup/_realsetup.in 2005-09-29 13:44:53.442091000 +0200
+diff -Nur openswan-2.4.5rc5/programs/_realsetup/_realsetup.in openswan-2.4.5rc5.patched/programs/_realsetup/_realsetup.in
+--- openswan-2.4.5rc5/programs/_realsetup/_realsetup.in 2005-07-28 02:23:48.000000000 +0200
++++ openswan-2.4.5rc5.patched/programs/_realsetup/_realsetup.in 2006-03-29 01:20:44.000000000 +0200
@@ -235,7 +235,7 @@
# misc pre-Pluto setup
perform rm -f $info $lock $plutopid
perform echo "...Openswan IPsec stopped" "|" $LOGONLY
-diff -Nur openswan-2.4.0.orig/programs/send-pr/send-pr.in openswan-2.4.0/programs/send-pr/send-pr.in
---- openswan-2.4.0.orig/programs/send-pr/send-pr.in 2005-04-18 01:04:46.000000000 +0200
-+++ openswan-2.4.0/programs/send-pr/send-pr.in 2005-09-29 13:44:53.442091000 +0200
+diff -Nur openswan-2.4.5rc5/programs/send-pr/send-pr.in openswan-2.4.5rc5.patched/programs/send-pr/send-pr.in
+--- openswan-2.4.5rc5/programs/send-pr/send-pr.in 2005-04-18 01:04:46.000000000 +0200
++++ openswan-2.4.5rc5.patched/programs/send-pr/send-pr.in 2006-03-29 01:20:44.000000000 +0200
@@ -402,7 +402,7 @@
else
if [ "$fieldname" != "Category" ]
echo "/^>${fieldname}:/ s/${dpat}//" >> $FIXFIL
fi
echo "${fmtname}${desc}" >> $file
-diff -Nur openswan-2.4.0.orig/programs/setup/setup.in openswan-2.4.0/programs/setup/setup.in
---- openswan-2.4.0.orig/programs/setup/setup.in 2005-07-25 21:17:03.000000000 +0200
-+++ openswan-2.4.0/programs/setup/setup.in 2005-09-29 13:44:52.446028750 +0200
+diff -Nur openswan-2.4.5rc5/programs/setup/setup.in openswan-2.4.5rc5.patched/programs/setup/setup.in
+--- openswan-2.4.5rc5/programs/setup/setup.in 2005-07-25 21:17:03.000000000 +0200
++++ openswan-2.4.5rc5.patched/programs/setup/setup.in 2006-03-29 01:20:44.000000000 +0200
@@ -117,12 +117,22 @@
# do it
case "$1" in
tmp=/var/run/pluto/ipsec_setup.st
outtmp=/var/run/pluto/ipsec_setup.out
(
-diff -Nur openswan-2.4.0.orig/programs/showhostkey/showhostkey.in openswan-2.4.0/programs/showhostkey/showhostkey.in
---- openswan-2.4.0.orig/programs/showhostkey/showhostkey.in 2004-11-14 14:40:41.000000000 +0100
-+++ openswan-2.4.0/programs/showhostkey/showhostkey.in 2005-09-29 13:44:52.446028750 +0200
+diff -Nur openswan-2.4.5rc5/programs/showhostkey/showhostkey.in openswan-2.4.5rc5.patched/programs/showhostkey/showhostkey.in
+--- openswan-2.4.5rc5/programs/showhostkey/showhostkey.in 2004-11-14 14:40:41.000000000 +0100
++++ openswan-2.4.5rc5.patched/programs/showhostkey/showhostkey.in 2006-03-29 01:20:44.000000000 +0200
@@ -63,7 +63,7 @@
exit 1
fi
awk ' BEGIN {
inkey = 0
-diff -Nur openswan-2.4.0.orig/programs/_startklips/_startklips.in openswan-2.4.0/programs/_startklips/_startklips.in
---- openswan-2.4.0.orig/programs/_startklips/_startklips.in 2005-03-31 23:07:27.000000000 +0200
-+++ openswan-2.4.0/programs/_startklips/_startklips.in 2005-09-29 13:44:53.442091000 +0200
+diff -Nur openswan-2.4.5rc5/programs/_startklips/_startklips.in openswan-2.4.5rc5.patched/programs/_startklips/_startklips.in
+--- openswan-2.4.5rc5/programs/_startklips/_startklips.in 2005-11-25 00:08:05.000000000 +0100
++++ openswan-2.4.5rc5.patched/programs/_startklips/_startklips.in 2006-03-29 01:23:54.000000000 +0200
@@ -262,15 +262,15 @@
echo "FATAL ERROR: Both KLIPS and NETKEY IPsec code is present in kernel"
exit
fi
if test -f $netkey
-@@ -278,18 +278,18 @@
+@@ -278,21 +278,21 @@
klips=false
if test -f $modules
then
+ insmod -qv xfrm4_tunnel
# xfrm_user contains netlink support for IPsec
- modprobe -qv xfrm_user
+- modprobe -qv hw_random
+ insmod -qv xfrm_user
++ insmod -qv hw_random
+ # padlock must load before aes module
+- modprobe -qv padlock
++ insmod -qv padlock
# load the most common ciphers/algo's
- modprobe -qv sha1
- modprobe -qv md5
fi
fi
-@@ -305,7 +305,12 @@
+@@ -308,10 +308,10 @@
fi
unset MODPATH MODULECONF # no user overrides!
depmod -a >/dev/null 2>&1
+- modprobe -qv hw_random
++ insmod -qv hw_random
+ # padlock must load before aes module
+- modprobe -qv padlock
- modprobe -v ipsec
-+ if [ -f modprobe ]
-+ then modprobe -v ipsec
-+ elif [ -f insmod ]
-+ then insmod ipsec
-+ fi
-+
++ insmod -qv padlock
++ insmod -v ipsec
fi
if test ! -f $ipsecversion
then
+diff -Nur openswan-2.4.5rc5/programs/_startklips/_startklips.in.orig openswan-2.4.5rc5.patched/programs/_startklips/_startklips.in.orig
+--- openswan-2.4.5rc5/programs/_startklips/_startklips.in.orig 1970-01-01 01:00:00.000000000 +0100
++++ openswan-2.4.5rc5.patched/programs/_startklips/_startklips.in.orig 2005-11-25 00:08:05.000000000 +0100
+@@ -0,0 +1,407 @@
++#!/bin/sh
++# KLIPS startup script
++# Copyright (C) 1998, 1999, 2001, 2002 Henry Spencer.
++#
++# This program is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by the
++# Free Software Foundation; either version 2 of the License, or (at your
++# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++# for more details.
++#
++# RCSID $Id$
++
++me='ipsec _startklips' # for messages
++
++# KLIPS-related paths
++sysflags=/proc/sys/net/ipsec
++modules=/proc/modules
++# full rp_filter path is $rpfilter1/interface/$rpfilter2
++rpfilter1=/proc/sys/net/ipv4/conf
++rpfilter2=rp_filter
++# %unchanged or setting (0, 1, or 2)
++rpfiltercontrol=0
++ipsecversion=/proc/net/ipsec_version
++moduleplace=/lib/modules/`uname -r`/kernel/net/ipsec
++bareversion=`uname -r | sed -e 's/\.nptl//' | sed -e 's/^\(2\.[0-9]\.[1-9][0-9]*-[1-9][0-9]*\(\.[0-9][0-9]*\)*\(\.x\)*\).*$/\1/'`
++moduleinstplace=/lib/modules/$bareversion/kernel/net/ipsec
++case $bareversion in
++ 2.6*)
++ modulename=ipsec.ko
++ ;;
++ *)
++ modulename=ipsec.o
++ ;;
++esac
++
++klips=true
++netkey=/proc/net/pfkey
++
++info=/dev/null
++log=daemon.error
++for dummy
++do
++ case "$1" in
++ --log) log="$2" ; shift ;;
++ --info) info="$2" ; shift ;;
++ --debug) debug="$2" ; shift ;;
++ --omtu) omtu="$2" ; shift ;;
++ --fragicmp) fragicmp="$2" ; shift ;;
++ --hidetos) hidetos="$2" ; shift ;;
++ --rpfilter) rpfiltercontrol="$2" ; shift ;;
++ --) shift ; break ;;
++ -*) echo "$me: unknown option \`$1'" >&2 ; exit 2 ;;
++ *) break ;;
++ esac
++ shift
++done
++
++
++
++# some shell functions, to clarify the actual code
++
++# set up a system flag based on a variable
++# sysflag value shortname default flagname
++sysflag() {
++ case "$1" in
++ '') v="$3" ;;
++ *) v="$1" ;;
++ esac
++ if test ! -f $sysflags/$4
++ then
++ if test " $v" != " $3"
++ then
++ echo "cannot do $2=$v, $sysflags/$4 does not exist"
++ exit 1
++ else
++ return # can't set, but it's the default anyway
++ fi
++ fi
++ case "$v" in
++ yes|no) ;;
++ *) echo "unknown (not yes/no) $2 value \`$1'"
++ exit 1
++ ;;
++ esac
++ case "$v" in
++ yes) echo 1 >$sysflags/$4 ;;
++ no) echo 0 >$sysflags/$4 ;;
++ esac
++}
++
++# set up a Klips interface
++klipsinterface() {
++ # pull apart the interface spec
++ virt=`expr $1 : '\([^=]*\)=.*'`
++ phys=`expr $1 : '[^=]*=\(.*\)'`
++ case "$virt" in
++ ipsec[0-9]) ;;
++ *) echo "invalid interface \`$virt' in \`$1'" ; exit 1 ;;
++ esac
++
++ # figure out ifconfig for interface
++ addr=
++ eval `ifconfig $phys |
++ awk '$1 == "inet" && $2 ~ /^addr:/ && $NF ~ /^Mask:/ {
++ gsub(/:/, " ", $0)
++ print "addr=" $3
++ other = $5
++ if ($4 == "Bcast")
++ print "type=broadcast"
++ else if ($4 == "P-t-P")
++ print "type=pointopoint"
++ else if (NF == 5) {
++ print "type="
++ other = ""
++ } else
++ print "type=unknown"
++ print "otheraddr=" other
++ print "mask=" $NF
++ }'`
++ if test " $addr" = " "
++ then
++ echo "unable to determine address of \`$phys'"
++ exit 1
++ fi
++ if test " $type" = " unknown"
++ then
++ echo "\`$phys' is of an unknown type"
++ exit 1
++ fi
++ if test " $omtu" != " "
++ then
++ mtu="mtu $omtu"
++ else
++ mtu=
++ fi
++ echo "KLIPS $virt on $phys $addr/$mask $type $otheraddr $mtu" | logonly
++
++ if $klips
++ then
++ # attach the interface and bring it up
++ ipsec tncfg --attach --virtual $virt --physical $phys
++ ifconfig $virt inet $addr $type $otheraddr netmask $mask $mtu
++ fi
++
++ # if %defaultroute, note the facts
++ if test " $2" != " "
++ then
++ (
++ echo "defaultroutephys=$phys"
++ echo "defaultroutevirt=$virt"
++ echo "defaultrouteaddr=$addr"
++ if test " $2" != " 0.0.0.0"
++ then
++ echo "defaultroutenexthop=$2"
++ fi
++ ) >>$info
++ else
++ echo '#dr: no default route' >>$info
++ fi
++
++ # check for rp_filter trouble
++ checkif $phys # thought to be a problem only on phys
++}
++
++# check an interface for problems
++checkif() {
++ $klips || return 0
++ rpf=$rpfilter1/$1/$rpfilter2
++ if test -f $rpf
++ then
++ r="`cat $rpf`"
++ if test " $r" != " 0"
++ then
++ case "$r-$rpfiltercontrol" in
++ 0-%unchanged|0-0|1-1|2-2)
++ # happy state
++ ;;
++ *-%unchanged)
++ echo "WARNING: $1 has route filtering turned on; KLIPS may not work ($rpf is $r)"
++ ;;
++ [012]-[012])
++ echo "WARNING: changing route filtering on $1 (changing $rpf from $r to $rpfiltercontrol)"
++ echo "$rpfiltercontrol" >$rpf
++ ;;
++ [012]-*)
++ echo "ERROR: unknown rpfilter setting: $rpfiltercontrol"
++ ;;
++ *)
++ echo "ERROR: unknown $rpf value $r"
++ ;;
++ esac
++ fi
++ fi
++}
++
++# interfaces=%defaultroute: put ipsec0 on top of default route's interface
++defaultinterface() {
++ phys=`netstat -nr |
++ awk '$1 == "0.0.0.0" && $3 == "0.0.0.0" { print $NF }'`
++ if test " $phys" = " "
++ then
++ echo "no default route, %defaultroute cannot cope!!!"
++ exit 1
++ fi
++ if test `echo " $phys" | wc -l` -gt 1
++ then
++ echo "multiple default routes, %defaultroute cannot cope!!!"
++ exit 1
++ fi
++ next=`netstat -nr |
++ awk '$1 == "0.0.0.0" && $3 == "0.0.0.0" { print $2 }'`
++ klipsinterface "ipsec0=$phys" $next
++}
++
++# log only to syslog, not to stdout/stderr
++logonly() {
++ logger -p $log -t ipsec_setup
++}
++
++# sort out which module is appropriate, changing it if necessary
++setmodule() {
++ if [ -e /proc/kallsyms ]
++ then
++ kernelsymbols="/proc/kallsyms";
++ echo "calcgoo: warning: 2.6 kernel with kallsyms not supported yet"
++ else
++ kernelsymbols="/proc/ksyms";
++ fi
++ wantgoo="`ipsec calcgoo $kernelsymbols`"
++ module=$moduleplace/$modulename
++ if test -f $module
++ then
++ goo="`nm -ao $module | ipsec calcgoo`"
++ if test " $wantgoo" = " $goo"
++ then
++ return # looks right
++ fi
++ fi
++ if test -f $moduleinstplace/$wantgoo
++ then
++ echo "modprobe failed, but found matching template module $wantgoo."
++ echo "Copying $moduleinstplace/$wantgoo to $module."
++ rm -f $module
++ mkdir -p $moduleplace
++ cp -p $moduleinstplace/$wantgoo $module
++ # "depmod -a" gets done by caller
++ fi
++}
++
++
++
++# main line
++
++# load module if possible
++if test -f $ipsecversion && test -f $netkey
++then
++ # both KLIPS and NETKEY code detected, bail out
++ echo "FATAL ERROR: Both KLIPS and NETKEY IPsec code is present in kernel"
++ exit
++fi
++if test ! -f $ipsecversion && test ! -f $netkey && modprobe -qn ipsec
++then
++ # statically compiled KLIPS/NETKEY not found; try to load the module
++ modprobe ipsec
++fi
++
++if test ! -f $ipsecversion && test ! -f $netkey
++then
++ modprobe -v af_key
++fi
++
++if test -f $netkey
++then
++ klips=false
++ if test -f $modules
++ then
++ modprobe -qv ah4
++ modprobe -qv esp4
++ modprobe -qv ipcomp
++ # xfrm4_tunnel is needed by ipip and ipcomp
++ modprobe -qv xfrm4_tunnel
++ # xfrm_user contains netlink support for IPsec
++ modprobe -qv xfrm_user
++ modprobe -qv hw_random
++ # padlock must load before aes module
++ modprobe -qv padlock
++ # load the most common ciphers/algo's
++ modprobe -qv sha1
++ modprobe -qv md5
++ modprobe -qv des
++ modprobe -qv aes
++ fi
++fi
++
++if test ! -f $ipsecversion && $klips
++then
++ if test -r $modules # kernel does have modules
++ then
++ if [ ! -e /proc/ksyms -a ! -e /proc/kallsyms ]
++ then
++ echo "Broken 2.6 kernel without kallsyms, skipping calcgoo (Fedora rpm?)"
++ else
++ setmodule
++ fi
++ unset MODPATH MODULECONF # no user overrides!
++ depmod -a >/dev/null 2>&1
++ modprobe -qv hw_random
++ # padlock must load before aes module
++ modprobe -qv padlock
++ modprobe -v ipsec
++ fi
++ if test ! -f $ipsecversion
++ then
++ echo "kernel appears to lack IPsec support (neither CONFIG_KLIPS or CONFIG_NET_KEY are set)"
++ exit 1
++ fi
++fi
++
++# figure out debugging flags
++case "$debug" in
++'') debug=none ;;
++esac
++if test -r /proc/net/ipsec_klipsdebug
++then
++ echo "KLIPS debug \`$debug'" | logonly
++ case "$debug" in
++ none) ipsec klipsdebug --none ;;
++ all) ipsec klipsdebug --all ;;
++ *) ipsec klipsdebug --none
++ for d in $debug
++ do
++ ipsec klipsdebug --set $d
++ done
++ ;;
++ esac
++elif $klips
++then
++ if test " $debug" != " none"
++ then
++ echo "klipsdebug=\`$debug' ignored, KLIPS lacks debug facilities"
++ fi
++fi
++
++# figure out misc. kernel config
++if test -d $sysflags
++then
++ sysflag "$fragicmp" "fragicmp" yes icmp
++ echo 1 >$sysflags/inbound_policy_check # no debate
++ sysflag no "no_eroute_pass" no no_eroute_pass # obsolete parm
++ sysflag no "opportunistic" no opportunistic # obsolete parm
++ sysflag "$hidetos" "hidetos" yes tos
++elif $klips
++then
++ echo "WARNING: cannot adjust KLIPS flags, no $sysflags directory!"
++ # carry on
++fi
++
++if $klips
++then
++ # clear tables out in case dregs have been left over
++ ipsec eroute --clear
++ ipsec spi --clear
++elif test $netkey
++then
++ if ip xfrm state > /dev/null 2>&1
++ then
++ ip xfrm state flush
++ ip xfrm policy flush
++ elif type setkey > /dev/null 2>&1
++ then
++ # Check that the setkey command is available.
++ setkeycmd=
++ PATH=$PATH:/usr/local/sbin
++ for dir in `echo $PATH | tr ':' ' '`
++ do
++ if test -f $dir/setkey -a -x $dir/setkey
++ then
++ setkeycmd=$dir/setkey
++ break # NOTE BREAK OUT
++ fi
++ done
++ $setkeycmd -F
++ $setkeycmd -FP
++ else
++
++ echo "WARNING: cannot flush state/policy database -- \`$1'. Install a newer version of iproute/iproute2 or install the ipsec-tools package to obtain the setkey command." |
++ logger -s -p daemon.error -t ipsec_setup
++ fi
++fi
++
++# figure out interfaces
++for i
++do
++ case "$i" in
++ ipsec*=?*) klipsinterface "$i" ;;
++ %defaultroute) defaultinterface ;;
++ *) echo "interface \`$i' not understood"
++ exit 1
++ ;;
++ esac
++done
++
++exit 0
+++ /dev/null
-diff -Nur openswan-2.4.4/linux/include/openswan.h openswan-2.4.4.patched/linux/include/openswan.h
---- openswan-2.4.4/linux/include/openswan.h 2005-04-14 22:21:51.000000000 +0200
-+++ openswan-2.4.4.patched/linux/include/openswan.h 2005-12-23 20:31:58.248159750 +0100
-@@ -78,6 +78,10 @@
- #define NET_21
- #endif
-
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
-+#define KERNEL_2615
-+#endif
-+
- #ifndef IPPROTO_COMP
- # define IPPROTO_COMP 108
- #endif /* !IPPROTO_COMP */
-diff -Nur openswan-2.4.4/linux/net/ipsec/ipcomp.c openswan-2.4.4.patched/linux/net/ipsec/ipcomp.c
---- openswan-2.4.4/linux/net/ipsec/ipcomp.c 2005-08-28 01:40:00.000000000 +0200
-+++ openswan-2.4.4.patched/linux/net/ipsec/ipcomp.c 2005-12-23 20:35:02.482256250 +0100
-@@ -600,7 +600,9 @@
- memcpy(n->head,
- skb->head,
- ((char *)iph - (char *)skb->head) + iphlen);
-- n->list=NULL;
-+#ifndef KERNEL_2615
-+ n->list=NULL;
-+#endif
- n->next=NULL;
- n->prev=NULL;
- n->sk=NULL;
-@@ -657,7 +659,11 @@
- n->pkt_bridged=skb->pkt_bridged;
- #endif /* NETDEV_23 */
- n->ip_summed=0;
-- n->stamp=skb->stamp;
-+#ifdef KERNEL_2615
-+ n->tstamp=skb->tstamp;
-+#else
-+ n->stamp=skb->stamp;
-+#endif
- #ifndef NETDEV_23 /* this seems to have been removed in 2.4 */
- #if defined(CONFIG_SHAPER) || defined(CONFIG_SHAPER_MODULE)
- n->shapelatency=skb->shapelatency; /* Latency on frame */
-diff -Nur openswan-2.4.4/linux/net/ipsec/ipsec_tunnel.c openswan-2.4.4.patched/linux/net/ipsec/ipsec_tunnel.c
---- openswan-2.4.4/linux/net/ipsec/ipsec_tunnel.c 2005-09-22 00:57:43.000000000 +0200
-+++ openswan-2.4.4.patched/linux/net/ipsec/ipsec_tunnel.c 2005-12-23 20:38:17.666454500 +0100
-@@ -34,6 +34,9 @@
- #include <linux/interrupt.h> /* mark_bh */
-
- #include <net/tcp.h>
-+#ifdef KERNEL_2615
-+#include <net/inet_timewait_sock.h>
-+#endif
- #include <net/udp.h>
- #include <linux/skbuff.h>
-
-@@ -272,9 +275,13 @@
-
- if(ixs->skb->sk) {
- #ifdef NET_26
-+#ifdef KERNEL_2615
-+ struct inet_timewait_sock *tw;
-+ tw = (struct inet_timewait_sock *)ixs->skb->sk;
-+#else
- struct tcp_tw_bucket *tw;
--
- tw = (struct tcp_tw_bucket *)ixs->skb->sk;
-+#endif
-
- ixs->sport = ntohs(tw->tw_sport);
- ixs->dport = ntohs(tw->tw_dport);
-diff -Nur openswan-2.4.4/linux/net/ipsec/pfkey_v2.c openswan-2.4.4.patched/linux/net/ipsec/pfkey_v2.c
---- openswan-2.4.4/linux/net/ipsec/pfkey_v2.c 2005-09-14 18:40:45.000000000 +0200
-+++ openswan-2.4.4.patched/linux/net/ipsec/pfkey_v2.c 2005-12-23 20:43:21.481441750 +0100
-@@ -459,11 +459,17 @@
- "skb=0p%p dequeued.\n", skb);
- printk(KERN_INFO "klips_debug:pfkey_destroy_socket: "
- "pfkey_skb contents:");
-+#ifndef KERNEL_2615
-+ printk(" list:0p%p", skb->list);
-+#endif
- printk(" next:0p%p", skb->next);
- printk(" prev:0p%p", skb->prev);
-- printk(" list:0p%p", skb->list);
- printk(" sk:0p%p", skb->sk);
-+#ifdef KERNEL_2615
-+ printk(" tstamp:%d.%d", skb->tstamp.off_sec, skb->tstamp.off_usec);
-+#else
- printk(" stamp:%ld.%ld", skb->stamp.tv_sec, skb->stamp.tv_usec);
-+#endif
- printk(" dev:0p%p", skb->dev);
- if(skb->dev) {
- if(skb->dev->name) {
-@@ -1376,7 +1382,12 @@
- #endif /* NET_21 */
-
- skb_copy_datagram_iovec(skb, 0, msg->msg_iov, size);
-- sk->sk_stamp=skb->stamp;
-+#ifdef KERNEL_2615
-+ sk->sk_stamp.tv_sec=skb->tstamp.off_sec;
-+ sk->sk_stamp.tv_usec=skb->tstamp.off_usec;
-+#else
-+ sk->sk_stamp=skb->stamp;
-+#endif
-
- skb_free_datagram(sk, skb);
- return size;
-@@ -1495,8 +1506,13 @@
- #endif
- sk->sk_protocol,
- sk->sk_sndbuf,
-+#ifdef KERNEL_2615
-+ sk->sk_stamp.tv_sec,
-+ sk->sk_stamp.tv_usec,
-+#else
- (unsigned int)sk->sk_stamp.tv_sec,
- (unsigned int)sk->sk_stamp.tv_usec,
-+#endif
- sk->sk_socket->flags,
- sk->sk_socket->type,
- sk->sk_socket->state);
projects / openwrt / staging / zorun.git / commitdiff