ralink: add support for WSR-600/1166

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43244

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index c5957b393a49eb6a2f941d43d545d4be2d4fc8d2..de0115f6d5fb4a013f2ae46555ceeb88d206593d 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -121,13 +121,16 @@ ramips_setup_interfaces()
        mzk-750dhp | \
        whr-300hp2 | \
        whr-600d | \
+       wsr-600 | \
+       wsr-1166 | \
        wt1520)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
                ucidef_add_switch_vlan "switch0" "2" "4 6t"
                ;;
-       whr-1166d)
+
+       whr-1166)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index b743c8408aa413f42de1f4ba4e95d4a13db9527f..dfa5468205fa1f458bc3c44bba2495686785ab4b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -170,6 +170,10 @@ get_status_led() {
        wr8305rt)
                status_led="wr8305rt:sys"
                ;;
+       wsr-600 | \
+       wsr-1166)
+               status_led="buffalo:orange:diag"
+               ;;
        wnce2001)
                status_led="netgear:green:power"
                ;;

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index fcb8fdcf0bf31ffa46be2cb492542296f4cdec26..ff5044c61560a36b030de41a6dac34242c9c9c96 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -79,6 +79,12 @@ ramips_board_detect() {
        *"Aztech HW550-3G")
                name="hw550-3g"
                ;;
+       *"Buffalo WSR-600")
+               name="wsr-600"
+               ;;
+       *"Buffalo WSR-1166")
+               name="wsr-1166"
+               ;;
        *"CY-SWR1100")
                name="cy-swr1100"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 3f383a65f00ac2dfcfca1b110307d232f283c22f..4962b8b4d080b99856e589f52f73230473a90e98 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -89,6 +89,8 @@ platform_check_image() {
        whr-g300n |\
        whr-600d |\
        whr-1166d |\
+       wsr-600 |\
+       wsr-1166 |\
        wl-330n | \
        wl-330n3g | \
        wl-351 | \

diff --git a/target/linux/ramips/dts/WSR-1166.dts b/target/linux/ramips/dts/WSR-1166.dts
new file mode 100644 (file)
index 0000000..2a90734
--- /dev/null
+++ b/target/linux/ramips/dts/WSR-1166.dts
@@ -0,0 +1,149 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+       compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
+       model = "Buffalo WSR-1166";
+
+       memory@0 {
+               reg = <0x0 0x8000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus@1E000000 {
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l12805d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x6b0000>;
+                               };
+
+                               partition@f700000 {
+                                       label = "usercfg";
+                                       reg = <0x700000 0x100000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               internet_g {
+                       label = "buffalo:green:internet";
+                       gpios = <&gpio1 9 1>;
+               };
+               router_g {
+                       label = "buffalo:green:router";
+                       gpios = <&gpio1 10 1>;
+               };
+               router_o {
+                       label = "buffalo:orange:router";
+                       gpios = <&gpio1 11 1>;
+               };
+               internet_o {
+                       label = "buffalo:orange:internet";
+                       gpios = <&gpio1 12 1>;
+               };
+               wifi_o {
+                       label = "buffalo:orange:wifi";
+                       gpios = <&gpio1 13 1>;
+               };
+               power {
+                       label = "buffalo:green:power";
+                       gpios = <&gpio0 14 1>;
+               };
+               diag {
+                       label = "buffalo:orange:diag";
+                       gpios = <&gpio1 15 1>;
+               };
+               wifi_g {
+                       label = "buffalo:green:wifi";
+                       gpios = <&gpio1 16 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               power {
+                       label = "power";
+                       gpios = <&gpio0 18 1>;
+                       linux,code = <0x74>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 3 1>;
+                       linux,code = <0x198>;
+               };
+               aoss {
+                       label = "aoss";
+                       gpios = <&gpio0 6 1>;
+                       linux,code = <0x211>;
+               };
+               auto {
+                       label = "mode";
+                       gpios = <&gpio0 7 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+               ap {
+                       label = "ap";
+                       gpios = <&gpio0 10 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+               router {
+                       label = "router";
+                       gpios = <&gpio0 12 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+       };
+
+       gpio_poweroff {
+               compatible = "gpio-poweroff";
+               gpios = <&gpio0 0 1>;
+       };
+};

diff --git a/target/linux/ramips/dts/WSR-600.dts b/target/linux/ramips/dts/WSR-600.dts
new file mode 100644 (file)
index 0000000..be260a7
--- /dev/null
+++ b/target/linux/ramips/dts/WSR-600.dts
@@ -0,0 +1,148 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+       compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
+       model = "Buffalo WSR-600";
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus@1E000000 {
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l12805d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x6b0000>;
+                               };
+
+                               partition@f700000 {
+                                       label = "usercfg";
+                                       reg = <0x700000 0x100000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "buffalo:green:power";
+                       gpios = <&gpio0 12 1>;
+               };
+               wifi_o {
+                       label = "buffalo:orange:wifi";
+                       gpios = <&gpio1 9 1>;
+               };
+               diag {
+                       label = "buffalo:orange:diag";
+                       gpios = <&gpio1 10 1>;
+               };
+               wifi_g {
+                       label = "buffalo:green:wifi";
+                       gpios = <&gpio1 12 1>;
+               };
+               router_o {
+                       label = "buffalo:orange:router";
+                       gpios = <&gpio1 13 1>;
+               };
+               router_g {
+                       label = "buffalo:green:router";
+                       gpios = <&gpio1 14 1>;
+               };
+               internet_o {
+                       label = "buffalo:orange:internet";
+                       gpios = <&gpio1 15 1>;
+               };
+               internet_g {
+                       label = "buffalo:green:internet";
+                       gpios = <&gpio1 16 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               power {
+                       label = "power";
+                       gpios = <&gpio0 8 1>;
+                       linux,code = <0x74>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 11 1>;
+                       linux,code = <0x198>;
+               };
+               aoss {
+                       label = "aoss";
+                       gpios = <&gpio0 18 1>;
+                       linux,code = <0x211>;
+               };
+               auto {
+                       label = "mode";
+                       gpios = <&gpio0 7 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+               ap {
+                       label = "ap";
+                       gpios = <&gpio0 6 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+               router {
+                       label = "router";
+                       gpios = <&gpio0 10 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+       };
+       gpio_poweroff {
+               compatible = "gpio-poweroff";
+               gpios = <&gpio1 11 1>;
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 02485ba671109bc6828c78a524b321c547af0945..2fae792cb67a485c4cf78da9b263a6aaf5ed8274 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -839,10 +839,14 @@ endif
 #
 
 Image/Build/Profile/MT7621=$(call BuildFirmware/Default4M/$(1),$(1),mt7621,MT7621)
+Image/Build/Profile/WSR-600=$(call BuildFirmware/Default4M/$(1),$(1),wsr-600,WSR-600)
+Image/Build/Profile/WSR-1166=$(call BuildFirmware/Default4M/$(1),$(1),wsr-1166,WSR-1166)
 
 ifeq ($(SUBTARGET),mt7621)
 define Image/Build/Profile/Default
        $(call Image/Build/Profile/MT7621,$(1))
+       $(call Image/Build/Profile/WSR-600,$(1))
+       $(call Image/Build/Profile/WSR-1166,$(1))
 endef
 endif