Changes since U-Boot 0.3.1:
======================================================================
-* * Patch by Richard Woodruff, 19 June 03:
- - Fixed smc91c111 driver to sync with the u-boot environment (driver/smc91c111.c).
+* Patch by Devin Crumb, 02 Apr 2003:
+ Fix clock divider rounding problem in drivers/serial.c
+
+* Patch by Richard Woodruff, 19 June 03:
+ - Fixed smc91c111 driver to sync with the u-boot environment
+ (driver/smc91c111.c).
- Added eth_init error return check in NetLoop (net/net.c).
-* Patch by Ken Chou, 17 June 2003:
+* Patch by Ken Chou, 19 June 2003:
Added support for A3000 SBC board (Artis Microsystems Inc.)
* Patches by Murray Jensen, 17 Jun 2003:
#########################################################################
LIST_824x=" \
- BMW CPC45 CU824 MOUSSE \
- MUSENKI OXC PN62 Sandpoint8240 \
- Sandpoint8245 utx8245 \
+ A3000 BMW CPC45 CU824 \
+ MOUSSE MUSENKI OXC PN62 \
+ Sandpoint8240 Sandpoint8245 utx8245 \
"
-
+x
#########################################################################
## MPC8260 Systems (includes 8250, 8255 etc.)
#########################################################################
#########################################################################
xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
+A3000_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x a3000
+
BMW_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x bmw
--- /dev/null
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+U-Boot for Artis SBC-A3000
+---------------------------
+
+Artis SBC-A3000 has one flash socket that the user uses Intel 28F128J3A (16MB)
+or 28F064J3A (8MB) chips.
+
+In board's notation, bank 0 is the one at the address of 0xFF000000.
+bank 1 is the one at the address of 0xFF800000
+
+On power-up the processor jumps to the address of 0xFFF00100, the last
+megabyte of the bank 0 of flash.
+
+Thus, U-Boot is configured to reside in flash starting at the address of
+0xFFF00000. The environment space is located in flash separately from
+U-Boot, at the address of 0xFFFE0000.
+
+There is a National ns83815 10/100M ethernet controller on-board.
+
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <pci.h>
+
+int checkboard (void)
+{
+ ulong busfreq = get_bus_freq(0);
+ char buf[32];
+
+ printf("Board: A3000 Local Bus at %s MHz\n", strmhz(buf, busfreq));
+ return 0;
+
+}
+
+long int initdram (int board_type)
+{
+ int i, cnt;
+ volatile uchar * base= CFG_SDRAM_BASE;
+ volatile ulong * addr;
+ ulong save[32];
+ ulong val, ret = 0;
+
+ for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
+ addr = (volatile ulong *)base + cnt;
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ addr = (volatile ulong *)base;
+ save[i] = *addr;
+ *addr = 0;
+
+ if (*addr != 0) {
+ *addr = save[i];
+ goto Done;
+ }
+
+ for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
+ addr = (volatile ulong *)base + cnt;
+ val = *addr;
+ *addr = save[--i];
+ if (val != ~cnt) {
+ ulong new_bank0_end = cnt * sizeof(long) - 1;
+ ulong mear1 = mpc824x_mpc107_getreg(MEAR1);
+ ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
+ mear1 = (mear1 & 0xFFFFFF00) |
+ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
+ emear1 = (emear1 & 0xFFFFFF00) |
+ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
+ mpc824x_mpc107_setreg(MEAR1, mear1);
+ mpc824x_mpc107_setreg(EMEAR1, emear1);
+
+ ret = cnt * sizeof(long);
+ goto Done;
+ }
+ }
+
+ ret = CFG_MAX_RAM_SIZE;
+Done:
+ return ret;
+}
+
+/*
+ * Initialize PCI Devices
+ */
+#if 1
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_a3000_config_table[] = {
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ 0x0, 0x0, 0x0, /* unknown eth0 divice */
+ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ 0x0, 0x0, 0x0, /* unknown eth1 device */
+ pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
+ PCI_ENET1_MEMADDR,
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ 0x0, 0x0, 0x0, /* unknown eth1 device */
+ pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
+ PCI_ENET2_MEMADDR,
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { }
+};
+#endif
+
+#else
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_a3000_config_table[] = {
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
+ PCI_ENET1_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { }
+};
+#endif
+
+#endif
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+ config_table: pci_a3000_config_table,
+#endif
+};
+
+void pci_init_board(void)
+{
+ pci_mpc824x_init(&hose);
+}
--- /dev/null
+#
+# (C) Copyright 2000, 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Artis A-3000 boards
+#
+
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <mpc824x.h>
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+
+/*---------------------------------------------------------------------*/
+#define DEBUG_FLASH
+
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, uchar *dest, uchar data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#define BS(b) (b)
+#define BYTEME(x) ((x) & 0xFF)
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long flash_banks[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS;
+ unsigned long size, size_b[CFG_MAX_FLASH_BANKS];
+
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+ {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ DEBUGF("Get flash bank %d @ 0x%08lx\n", i, flash_banks[i]);
+/*
+ size_b[i] = flash_get_size((vu_char *)flash_banks[i], &flash_info[i]);
+*/
+ size_b[i] = flash_get_size((vu_char *) 0xff800000 , &flash_info[i]);
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN)
+ {
+ printf ("## Unknown FLASH on Bank %d: "
+ "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+ i, flash_info[i].flash_id,
+ size_b[i], size_b[i]<<20);
+ }
+ else
+ {
+ DEBUGF("## Flash bank %d at 0x%08lx sizes: 0x%08lx \n",
+ i, flash_banks[i], size_b[i]);
+
+ flash_get_offsets (flash_banks[i], &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ }
+ }
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, CFG_MONITOR_LEN);
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ DEBUGF("protect environtment %x @ %x\n", CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+
+ size = 0;
+ DEBUGF("## Final Flash bank sizes: ");
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+ {
+ DEBUGF("%08lx ", size_b[i]);
+ size += size_b[i];
+ }
+ DEBUGF("\n");
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ base += 0x00020000; /* 128k per bank */
+ }
+ return;
+
+ default:
+ printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
+ return;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("Fujitsu "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ case FLASH_MAN_MT: printf ("MT "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F320J3A:
+ printf ("28F320J3A (32Mbit = 128K x 32)\n");
+ break;
+ case FLASH_28F640J3A:
+ printf ("28F640J3A (64Mbit = 128K x 64)\n");
+ break;
+ case FLASH_28F128J3A:
+ printf ("28F128J3A (128Mbit = 128K x 128)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+#if 1
+ if (info->size >= (1 << 20)) {
+ i = 20;
+ } else {
+ i = 10;
+ }
+ printf (" Size: %ld %cB in %d Sectors\n",
+ info->size >> i,
+ (i == 20) ? 'M' : 'k',
+ info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+#endif
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info)
+{
+ vu_char manuf, device;
+
+ addr[0] = BS(0x90);
+ manuf = BS(addr[0]);
+ DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, manuf);
+
+ switch (manuf) {
+ case BYTEME(AMD_MANUFACT):
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case BYTEME(FUJ_MANUFACT):
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case BYTEME(SST_MANUFACT):
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case BYTEME(STM_MANUFACT):
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ case BYTEME(INTEL_MANUFACT):
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = BS(0xFF); /* restore read mode, (yes, BS is a NOP) */
+ return 0; /* no or unknown flash */
+ }
+
+ device = BS(addr[2]); /* device ID */
+
+ DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", (ulong)(&addr[1]), device);
+
+ switch (device) {
+ case BYTEME(INTEL_ID_28F320J3A):
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case BYTEME(INTEL_ID_28F640J3A):
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case BYTEME(INTEL_ID_28F128J3A):
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ addr[0] = BS(0xFF); /* restore read mode (yes, a NOP) */
+ return 0; /* => no or unknown flash */
+
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = BS(0xFF); /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
+ printf ("Can erase only Intel flash types - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_char *addr = (vu_char *)(info->start[sect]);
+ unsigned long status;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = BS(0x50); /* clear status register */
+ *addr = BS(0x20); /* erase setup */
+ *addr = BS(0xD0); /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = BS(0xB0); /* suspend erase */
+ *addr = BS(0xFF); /* reset to read mode */
+ return 1;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ *addr = BS(0xFF); /* reset to read mode */
+ }
+ }
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define FLASH_WIDTH 1 /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ uchar *wp = (uchar *)addr;
+ int rc;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+ while (cnt > 0) {
+ if ((rc = write_data(info, wp, *src)) != 0) {
+ return rc;
+ }
+ wp++;
+ src++;
+ cnt--;
+ }
+
+ return cnt;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, uchar *dest, uchar data)
+{
+ vu_char *addr = (vu_char *)dest;
+ ulong status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((BS(*addr) & data) != data) {
+ return 2;
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = BS(0x40); /* write setup */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ start = get_timer (0);
+
+ while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = BS(0xFF); /* restore read mode */
+ return 1;
+ }
+ }
+
+ *addr = BS(0xFF); /* restore read mode */
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc824x/start.o (.text)
+ lib_ppc/board.o (.text)
+ lib_ppc/ppcstring.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
+
{
DECLARE_GLOBAL_DATA_PTR;
- int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+ int clock_divisor = (CFG_NS16550_CLK + gd->baudrate * 8 )
+ / (gd->baudrate * 16);
#ifdef CFG_NS87308
initialise_ns87308();
#if defined(CONFIG_EVB64260)
unsigned int mirror_hack[16];
#endif
-#if defined(CONFIG_SANDPOINT) || defined(CONFIG_MUSENKI)
+#if defined(CONFIG_SANDPOINT) || \
+ defined(CONFIG_MUSENKI) || \
+ defined(CONFIG_A3000)
void * console_addr;
#endif
#ifdef CONFIG_AMIGAONEG3SE
--- /dev/null
+/*
+ * (C) Copyright 2001, 2002, 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Configuration settings for the A-3000 board (Artis Microsystems Inc.).
+ * http://artismicro.com
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8245 1
+#define CONFIG_A3000 1
+
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_BOOTDELAY 5
+
+#if 0
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_BSP | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_NET | \
+ CFG_CMD_PCI )
+#endif
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "A3000> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_MAXARGS 8 /* Max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00400000 /* Default load address */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+/* #define CONFIG_TULIP */
+/* #define CONFIG_EEPRO100 */
+#define CONFIG_NATSEMI
+
+#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_ENET0_MEMADDR 0x80000000
+#define PCI_ENET1_IOADDR 0x81000000
+#define PCI_ENET1_MEMADDR 0x81000000
+#define PCI_ENET2_IOADDR 0x82000000
+#define PCI_ENET2_MEMADDR 0x82000000
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+
+#define CFG_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */
+#define CFG_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
+#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
+#define CFG_FLASH_BANKS { CFG_FLASH_BASE0_PRELIM }
+
+/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
+ * reset vector is actually located at FFB00100, but the 8245
+ * takes care of us.
+ */
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_EUMB_ADDR 0xFC000000
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+
+ /* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x04000000 /* 0 .. 128 MB of (S)DRAM */
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+/* #define CFG_MONITOR_BASE TEXT_BASE */
+/*#define CFG_GBL_DATA_SIZE 256*/
+#define CFG_GBL_DATA_SIZE 128
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#define CFG_HZ 1000
+
+ /* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 7
+#define CFG_ROMFAL 11
+#define CFG_DBUS_SIZE 0x3
+
+ /* Bit-field values for MCCR2.
+ */
+#define CFG_TSWAIT 0x5 /* Transaction Start Wait States timer */
+#define CFG_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
+
+ /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 121
+
+ /* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 8 /* Refresh to activate interval */
+
+ /* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
+#define CFG_ACTORW 3 /* FIXME was 2 */
+#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM 1
+#define CFG_REGDIMM 0
+
+#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+
+#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
+#define CFG_MAX_FLASH_SECT 128 /* Max number of sectors per flash */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+
+ /* Warining: environment is not EMBEDDED in the U-Boot code.
+ * It's stored in flash separately.
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFFFE0000
+#define CFG_ENV_SIZE 0x00020000 /* Size of the Environment */
+#define CFG_ENV_SECT_SIZE 0x00020000 /* Size of the Environment Sector */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+
+#endif /* __CONFIG_H */
projects / project / bcm63xx / u-boot.git / commitdiff