upgrade to 3.0-rc6 and optimize for armv5te again

SVN-Revision: 27592

diff --git a/target/linux/orion/Makefile b/target/linux/orion/Makefile
index 78e1f97a59c813fcc7fea18a357ad14b328e5d9c..0427735515838649d8e55aaa8c488338149992a6 100644 (file)
--- a/target/linux/orion/Makefile
+++ b/target/linux/orion/Makefile
@@ -10,10 +10,10 @@ ARCH:=arm
 BOARD:=orion
 BOARDNAME:=Marvell Orion
 SUBTARGETS:=generic harddisk
-CFLAGS=-Os -pipe -march=armv5t -mtune=xscale -fno-caller-saves
+CFLAGS=-Os -pipe -march=armv5te -mtune=xscale -fno-caller-saves
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=2.6.37.6
+LINUX_VERSION:=3.0-rc6
 
 include $(INCLUDE_DIR)/target.mk
 

diff --git a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
index 39b7e82e76a3ffb46d434dc7840a7dead5c90c3f..a3d9c82dc9930d4c489284f4b09b44ca262902a6 100644 (file)
--- a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
+++ b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
@@ -119,11 +119,11 @@ void __init dt2_pci_preinit(void)
        if (gpio_request(pin, "PCI IntA") == 0) {
                if (gpio_direction_input(pin) == 0) {
                        irq = gpio_to_irq(pin);
-                       set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+                       irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
                        printk (KERN_INFO "PCI IntA IRQ: %d\n", irq);
                } else {
                        printk(KERN_ERR "dt2_pci_preinit failed to "
-                                       "set_irq_type pin %d\n", pin);
+                                       "irq_set_irq_type pin %d\n", pin);
                        gpio_free(pin);
                }
        } else {
@@ -134,11 +134,11 @@ void __init dt2_pci_preinit(void)
        if (gpio_request(pin, "PCI IntB") == 0) {
                if (gpio_direction_input(pin) == 0) {
                        irq = gpio_to_irq(pin);
-                       set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+                       irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
                        printk (KERN_INFO "PCI IntB IRQ: %d\n", irq);
                } else {
                        printk(KERN_ERR "dt2_pci_preinit failed to "
-                                       "set_irq_type pin %d\n", pin);
+                                       "irq_set_irq_type pin %d\n", pin);
                        gpio_free(pin);
                }
        } else {
@@ -240,28 +240,28 @@ static struct mv_sata_platform_data dt2_sata_data = {
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-static struct orion5x_mpp_mode dt2_mpp_modes[] __initdata = {
-       {  0, MPP_GPIO },               // RTC interrupt
-       {  1, MPP_GPIO },               // 88e6131 interrupt
-       {  2, MPP_GPIO },               // PCI_intB
-       {  3, MPP_GPIO },               // PCI_intA
-       {  4, MPP_GPIO },               // reset button switch
-       {  5, MPP_GPIO },
-       {  6, MPP_GPIO },
-       {  7, MPP_GPIO },
-       {  8, MPP_GPIO },
-       {  9, MPP_GIGE },               /* GE_RXERR */
-       { 10, MPP_GPIO },               // usb
-       { 11, MPP_GPIO },               // usb
-       { 12, MPP_GIGE },               // GE_TXD[4]
-       { 13, MPP_GIGE },               // GE_TXD[5]
-       { 14, MPP_GIGE },               // GE_TXD[6]
-       { 15, MPP_GIGE },               // GE_TXD[7]
-       { 16, MPP_GIGE },               // GE_RXD[4]
-       { 17, MPP_GIGE },               // GE_RXD[5]
-       { 18, MPP_GIGE },               // GE_RXD[6]
-       { 19, MPP_GIGE },               // GE_RXD[7]
-       { -1 },
+static unsigned int dt2_mpp_modes[] __initdata = {
+       MPP0_GPIO,              // RTC interrupt
+       MPP1_GPIO,              // 88e6131 interrupt
+       MPP2_GPIO,              // PCI_intB
+       MPP3_GPIO,              // PCI_intA
+       MPP4_GPIO,              // reset button switch
+       MPP5_GPIO,
+       MPP6_GPIO,
+       MPP7_GPIO,
+       MPP8_GPIO,
+       MPP9_GIGE,              /* GE_RXERR */
+       MPP10_GPIO,             // usb
+       MPP11_GPIO,             // usb
+       MPP12_GIGE,             // GE_TXD[4]
+       MPP13_GIGE,             // GE_TXD[5]
+       MPP14_GIGE,             // GE_TXD[6]
+       MPP15_GIGE,             // GE_TXD[7]
+       MPP16_GIGE,             // GE_RXD[4]
+       MPP17_GIGE,             // GE_RXD[5]
+       MPP18_GIGE,             // GE_RXD[6]
+       MPP19_GIGE,             // GE_RXD[7]
+       0,
 };
 
 /*****************************************************************************