ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100"
;;
+dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
;;
dlink,dir-825-c1|\
dlink,dir-835-a1|\
+ dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
engenius,epg5000|\
lan_mac=$(mtd_get_mac_text "mac" 4)
wan_mac=$(mtd_get_mac_text "mac" 24)
;;
+ dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
nec,wg1200cr|\
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 4) 2
;;
+ dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
nec,wg1200cr|\
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
+ dlink,dir-842-c1|\
dlink,dir-842-c2|\
nec,wg1200cr)
ath10kcal_extract "art" 20480 12064
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ // Pull up on boot - otherwise the reset button won't work
+ reset-button {
+ gpio-hog;
+ output-high;
+ gpios = <11 GPIO_ACTIVE_LOW>;
+ line-name = "reset-button";
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devdata";
+ reg = <0x050000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "devconf";
+ reg = <0x060000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "misc";
+ reg = <0x070000 0x10000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x080000 0xf50000>;
+ };
+
+ art: partition@fd0000 {
+ label = "art";
+ reg = <0xfd0000 0x010000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "reserved";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRIP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xcb37cb37 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00f3cf00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9563_dlink_dir-842-c.dtsi"
+
+/ {
+ compatible = "dlink,dir-842-c1", "qca,qca9563";
+ model = "D-Link DIR-842 C1";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "dir-842-c1:green:wps";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "dir-842-c1:green:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "dir-842-c1:green:internet";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "dir-842-c1:green:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "qca9563_dlink_dir-842-c.dtsi"
/ {
- model = "D-Link DIR-842 C2";
compatible = "dlink,dir-842-c2", "qca,qca9563";
+ model = "D-Link DIR-842 C2";
aliases {
led-boot = &power;
led-upgrade = &power;
};
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
leds {
compatible = "gpio-leds";
linux,default-trigger = "phy0tpt";
};
};
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- // Pull up on boot - otherwise the reset button won't work
- reset-button {
- gpio-hog;
- output-high;
- gpios = <11 GPIO_ACTIVE_LOW>;
- line-name = "reset-button";
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "devdata";
- reg = <0x050000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "devconf";
- reg = <0x060000 0x10000>;
- read-only;
- };
-
- partition@70000 {
- label = "misc";
- reg = <0x070000 0x10000>;
- read-only;
- };
-
- partition@80000 {
- compatible = "seama";
- label = "firmware";
- reg = <0x080000 0xf50000>;
- };
-
- art: partition@fd0000 {
- label = "art";
- reg = <0xfd0000 0x010000>;
- read-only;
- };
-
- partition@fe0000 {
- label = "reserved";
- reg = <0xfe0000 0x20000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy-mask = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,mib-poll-interval = <500>;
-
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x10 0x81000080 /* POWER_ON_STRIP */
- 0x50 0xcc35cc35 /* LED_CTRL0 */
- 0x54 0xcb37cb37 /* LED_CTRL1 */
- 0x58 0x00000000 /* LED_CTRL2 */
- 0x5c 0x00f3cf00 /* LED_CTRL3 */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- pll-data = <0x03000101 0x00000101 0x00001919>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
-};
-
-&wmac {
- status = "okay";
- qca,no-eeprom;
};
&usb_phy0 {
endef
TARGET_DEVICES += dlink_dir-859-a1
-define Device/dlink_dir-842-c2
+define Device/dlink_dir-842-c
ATH_SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-842
- DEVICE_VARIANT := C2
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
KERNEL_INITRAMFS := $$(KERNEL) | seama
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE)
IMAGE_SIZE := 15680k
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct
+endef
+
+define Device/dlink_dir-842-c1
+ $(Device/dlink_dir-842-c)
+ DEVICE_VARIANT := C1
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+endef
+TARGET_DEVICES += dlink_dir-842-c1
+
+define Device/dlink_dir-842-c2
+ $(Device/dlink_dir-842-c)
+ DEVICE_VARIANT := C2
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += dlink_dir-842-c2