Wondershaper uci config and modules fix Hi,

this patch adds uci config style for wshaper and also fixes a small
problem with the loaded modules (act_police needs to be loaded).

Signed-off-by: Manuel Munz <freifunk@somakoma.de>
SVN-Revision: 28454

diff --git a/net/wshaper/Makefile b/net/wshaper/Makefile
index 987086bd4d2c81b46b0c2edf76cca0652e0ce1aa..5ea1bc92a939ace5c04c57cc424604c273b71753 100644 (file)
--- a/net/wshaper/Makefile
+++ b/net/wshaper/Makefile
@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wshaper
-PKG_VERSION:=0.1
+PKG_VERSION:=0.2
 
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
@@ -44,6 +44,7 @@ define Package/wshaper/install
        $(INSTALL_DIR) $(1)/usr/sbin/ $(1)/etc/init.d
        $(INSTALL_BIN) ./files/wshaper.htb $(1)/usr/sbin/
        $(INSTALL_BIN) ./files/wshaper.init $(1)/etc/init.d/wshaper
+       $(INSTALL_DATA) ./files/wshaper.config $(1)/etc/config/wshaper
 endef
 
 $(eval $(call BuildPackage,wshaper))

diff --git a/net/wshaper/files/wshaper.config b/net/wshaper/files/wshaper.config
new file mode 100644 (file)
index 0000000..ed857c5
--- /dev/null
+++ b/net/wshaper/files/wshaper.config
@@ -0,0 +1,4 @@
+config 'wshaper' 'settings'
+       option 'network' 'wan'
+       option 'downlink' '2000'
+       option 'uplink' '240'

diff --git a/net/wshaper/files/wshaper.htb b/net/wshaper/files/wshaper.htb
index d912f4dcaf1aa8f1bbab77435736b10354a34fd1..96f29cc46994cf0778a86f0bfdca2468f261b318 100755 (executable)
--- a/net/wshaper/files/wshaper.htb
+++ b/net/wshaper/files/wshaper.htb
@@ -5,23 +5,36 @@
 # Set the following values to somewhat less than your actual download
 # and uplink speed. In kilobits. Also set the device that is to be shaped.
 
-MODULES='sch_ingress sch_sfq sch_htb cls_u32'
-DOWNLINK=2000
-UPLINK=240
-DEV=eth0
+# All config needs to be done in /etc/config/wshaper
+
+. /etc/functions.sh
+config_load wshaper
+for s in downlink uplink network nopriohostdst nopriohostsrc noprioportdst noprioportsrc; do
+       config_get $s settings $s
+done
+
+device=$(uci_get_state network "$network" device)
+[ -z "$device" ] && logger -t wondershaper "Error: Could not find the device for network $network, aborting." && exit 1
+[ -z "$downlink" ] && logger -t wondershaper "Error: Downlink speed not set, aborting." && exit 1
+[ -z "$uplink" ] && logger -t wondershaper "Error: Uplink speed not set, aborting." && exit 1
+
+MODULES='sch_ingress sch_sfq sch_htb cls_u32 act_police'
+DOWNLINK="$downlink"
+UPLINK="$uplink"
+DEV="$device"
 
 # low priority OUTGOING traffic - you can leave this blank if you want
 # low priority source netmasks
-NOPRIOHOSTSRC=
+NOPRIOHOSTSRC="$nopriohostsrc"
 
 # low priority destination netmasks
-NOPRIOHOSTDST=
+NOPRIOHOSTDST="$nopriohostdst"
 
 # low priority source ports
-NOPRIOPORTSRC=
+NOPRIOPORTSRC="$noprioportsrc"
 
 # low priority destination ports
-NOPRIOPORTDST="21"
+NOPRIOPORTDST="$noprioportdst"
 
 if [ "$1" = "status" ]
 then
@@ -144,3 +157,5 @@ tc qdisc add dev $DEV handle ffff: ingress
 
 tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \
    0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1
+
+logger -t wondershaper "Wondershaper was started on device $device."