nand_spl: p1023rds: wait before enabling DDR controller

We have a requirement to wait a period of time before enabling the
DDR controller

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile
index 168e8686413113297e2c3e572a2fd8fb74dd00a8..da435213fcfdf7d43c268f748d4cd747d4868e6c 100644 (file)
--- a/nand_spl/board/freescale/p1023rds/Makefile
+++ b/nand_spl/board/freescale/p1023rds/Makefile
@@ -34,7 +34,8 @@ CFLAGS        += -DCONFIG_NAND_SPL
 
 SOBJS  = start.o resetvec.o
 COBJS  = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
-         nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+         nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o \
+         ../common.o
 
 SRCS   := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS   := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -114,6 +115,9 @@ ifneq ($(OBJTREE), $(SRCTREE))
 $(obj)nand_boot.c:
        @rm -f $(obj)nand_boot.c
        ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+$(obj)../common.c:
+       @rm -f $(obj)../common.c
+       ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
 endif
 
 #########################################################################

diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c
index 0065c876dedfae63ed4eeeea989d5a7843d14f89..6ab1f50378d0ee1244cc00065593ce7fc9412300 100644 (file)
--- a/nand_spl/board/freescale/p1023rds/nand_boot.c
+++ b/nand_spl/board/freescale/p1023rds/nand_boot.c
@@ -25,6 +25,10 @@
 #include <asm/io.h>
 #include <nand.h>
 #include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 /* Fixed sdram init -- doesn't use serial presence detect. */
 void sdram_init(void)
@@ -53,20 +57,27 @@ void sdram_init(void)
        out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
        out_be32(&ddr->ddr_cdr1, CONFIG_SYS_DDR_CDR_1);
        out_be32(&ddr->ddr_cdr2, CONFIG_SYS_DDR_CDR_2);
-       out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
+       /* Set, but do not enable the memory */
+       out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN);
+
+       asm volatile("sync;isync");
+       udelay(500);
+
+       /* Let the controller go */
+       out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
 }
 
 void board_init_f(ulong bootflag)
 {
-       u32 plat_ratio, bus_clk;
+       u32 plat_ratio;
        ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
        /* initialize selected port with appropriate baud rate */
        plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
        plat_ratio >>= 1;
-       bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+       gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
        NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-                       bus_clk / 16 / CONFIG_BAUDRATE);
+                       gd->bus_clk / 16 / CONFIG_BAUDRATE);
 
        puts("\nNAND boot... ");
        /* Initialize the DDR3 */