Specification:
- CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz
- DDR3 RAM: 2GB
- Network:
10/100M Ethernet x 1
- IR: x1 (Receive)
- USB (Host) Type-A x3
- USB (OTG) Type-A x1
- MicroSD Slot x 1
- eMMC Slot x1
- MicroUSB power input
- GPIO 40pin header
- UART 3pin header
- Leds:
- librecomputer:blue:status
- librecomputer:green:pwr
- Buttons:
- uboot button (used to enter fel mode)
- power button (can trigger power on)
- Power Supply via MicroUSB or GPIO 5V/2A
Installation:
- Write the image to SD Card with dd
- Boot from the SD Card
Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
[Fixed Signed-off-by]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
UENV:=pangolin
endef
+define U-Boot/libretech_all_h3_cc_h5
+ BUILD_SUBTARGET:=cortexa53
+ NAME:=Libre Computer ALL-H3-CC H5
+ BUILD_DEVICES:=libretech_all-h3-cc-h5
+ DEPENDS:=+PACKAGE_u-boot-libretech_all_h3_cc_h5:arm-trusted-firmware-sunxi
+ UENV:=a64
+endef
+
define U-Boot/nanopi_neo_plus2
BUILD_SUBTARGET:=cortexa53
NAME:=NanoPi NEO Plus2 (H5)
pangolin \
pine64_plus \
sopine_baseboard \
- orangepi_zero_plus
+ orangepi_zero_plus \
+ libretech_all_h3_cc_h5
UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes
endef
TARGET_DEVICES += friendlyarm_nanopi-neo2
+define Device/libretech_all-h3-cc-h5
+ DEVICE_VENDOR := Libre Computer
+ DEVICE_MODEL := ALL-H3-CC
+ DEVICE_VARIANT := H5
+ $(Device/sun50i-h5)
+ SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-libretech-all-h3-cc
+endef
+TARGET_DEVICES += libretech_all-h3-cc-h5
+
define Device/olimex_a64-olinuxino
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A64-Olinuxino