return 1;
}
-static struct lpddr2_device_details *get_lpddr2_details(u32 base, u8 cs,
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
struct lpddr2_device_details *lpddr2_dev_details)
{
u32 phy;
+ u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
if (!lpddr2_dev_details)
return lpddr2_dev_details;
}
-
-void emif_get_device_details(u32 emif_nr,
- struct lpddr2_device_details *cs0_device_details,
- struct lpddr2_device_details *cs1_device_details)
-{
- u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
-
- if (running_from_sdram()) {
- /*
- * We can not do automatic discovery running from SDRAM
- * Most likely we came here by mistake. Indicate error
- * by returning NULL
- */
- cs0_device_details = NULL;
- cs1_device_details = NULL;
- } else {
- /*
- * Automatically find the device details:
- *
- * Reset the PHY after each call to get_lpddr2_details().
- * If there is nothing connected to a given chip select
- * (typically CS1) mode register reads will mess up with
- * the PHY state and subsequent initialization won't work.
- * PHY reset brings back PHY to a good state.
- */
- cs0_device_details =
- get_lpddr2_details(base, CS0, cs0_device_details);
- emif_reset_phy(base);
-
- cs1_device_details =
- get_lpddr2_details(base, CS1, cs1_device_details);
- emif_reset_phy(base);
- }
-}
#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */
static void do_sdram_init(u32 base)
* - Obtained from user otherwise
*/
struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
- emif_get_device_details(emif_nr, &cs0_dev_details,
- &cs1_dev_details);
- dev_details.cs0_device_details = &cs0_dev_details;
- dev_details.cs1_device_details = &cs1_dev_details;
+ emif_reset_phy(base);
+ dev_details.cs0_device_details = emif_get_device_details(base, CS0,
+ &cs0_dev_details);
+ dev_details.cs1_device_details = emif_get_device_details(base, CS1,
+ &cs1_dev_details);
+ emif_reset_phy(base);
/* Return if no devices on this EMIF */
if (!dev_details.cs0_device_details &&
.manufacturer = LPDDR2_MANUFACTURER_ELPIDA
};
-static void emif_get_device_details_sdp(u32 emif_nr,
- struct lpddr2_device_details *cs0_device_details,
- struct lpddr2_device_details *cs1_device_details)
+struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs,
+ struct lpddr2_device_details *lpddr2_dev_details)
{
u32 omap_rev = omap_revision();
/* EMIF1 & EMIF2 have identical configuration */
- *cs0_device_details = elpida_2G_S4_details;
-
- if (omap_rev == OMAP4430_ES1_0)
- cs1_device_details = NULL;
- else
- *cs1_device_details = elpida_2G_S4_details;
+ if ((omap_rev == OMAP4430_ES1_0) && (cs == CS1)) {
+ /* Nothing connected on CS1 for ES1.0 */
+ return NULL;
+ } else {
+ /* In all other cases Elpida 2G device */
+ *lpddr2_dev_details = elpida_2G_S4_details;
+ return lpddr2_dev_details;
+ }
}
-void emif_get_device_details(u32 emif_nr,
- struct lpddr2_device_details *cs0_device_details,
- struct lpddr2_device_details *cs1_device_details)
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+ struct lpddr2_device_details *lpddr2_dev_details)
__attribute__((weak, alias("emif_get_device_details_sdp")));
#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
#else
-void emif_get_device_details(u32 emif_nr,
- struct lpddr2_device_details *cs0_device_details,
- struct lpddr2_device_details *cs1_device_details);
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+ struct lpddr2_device_details *lpddr2_dev_details);
void emif_get_device_timings(u32 emif_nr,
const struct lpddr2_device_timings **cs0_device_timings,
const struct lpddr2_device_timings **cs1_device_timings);