There are a number of problems that occur for the latest version
of the Realtek RTL8188CE device with the in-kernel driver. These
include selection of the wrong firmware, and system lockup. A full
fix is known, but is too invasive for inclusion in stable. This patch
fixes the problem with loading the wrong firmware, and logs a message
that the device may not work for kernels 3.6 and older.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Cc: Anisse Astier <anisse@astier.eu>
Cc: Li Chaoming <chaoming_li@realsil.com.cn>
Tested-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
#define CHIP_VER_B BIT(4)
#define CHIP_92C_BITMASK BIT(0)
+#define CHIP_UNKNOWN BIT(7)
#define CHIP_92C_1T2R 0x03
#define CHIP_92C 0x01
#define CHIP_88C 0x00
version = (value32 & TYPE_ID) ? VERSION_A_CHIP_92C :
VERSION_A_CHIP_88C;
} else {
- version = (value32 & TYPE_ID) ? VERSION_B_CHIP_92C :
- VERSION_B_CHIP_88C;
+ version = (enum version_8192c) (CHIP_VER_B |
+ ((value32 & TYPE_ID) ? CHIP_92C_BITMASK : 0) |
+ ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0));
+ if ((!IS_CHIP_VENDOR_UMC(version)) && (value32 &
+ CHIP_VER_RTL_MASK)) {
+ version = (enum version_8192c)(version |
+ ((((value32 & CHIP_VER_RTL_MASK) == BIT(12))
+ ? CHIP_VENDOR_UMC_B_CUT : CHIP_UNKNOWN) |
+ CHIP_VENDOR_UMC));
+ }
}
switch (version) {
/* request fw */
if (IS_VENDOR_UMC_A_CUT(rtlhal->version) &&
- !IS_92C_SERIAL(rtlhal->version))
+ !IS_92C_SERIAL(rtlhal->version)) {
rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU.bin";
- else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version))
+ } else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) {
rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU_B.bin";
+ pr_info("****** This B_CUT device may not work with kernels 3.6 and earlier\n");
+ }
rtlpriv->max_fw_size = 0x4000;
pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);