ramips: create shared DTSI for DIR-810L and TEW-810DR

These devices seem to have the same board, so let's have a common
file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ramips/dts/mt7620a_cameo_810.dtsi b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi
new file mode 100644 (file)
index 0000000..8ab166d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi
@@ -0,0 +1,116 @@
+//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       factory5g: partition@50000 {
+                               label = "factory5g";
+                               reg = <0x50000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "Wolf_Config";
+                               reg = <0x60000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               label = "MyDlink";
+                               reg = <0x70000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@f0000 {
+                               label = "Jffs2";
+                               reg = <0xf0000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@170000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x170000 0x690000>;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+
+       mediatek,portmap = "llllw";
+};
+
+&wmac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pa_pins>;
+
+       ralink,mtd-eeprom = <&factory 0x0>;
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               mtd-mac-address = <&factory 0x28>;
+               mtd-mac-address-increment = <2>;
+       };
+};

diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
index 8f6bf971ec297c924beb16a826a519bbba224de1..63952d3e6492f39fd40d956624a06a7f2e621986 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
+++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
@@ -1,9 +1,6 @@
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620a_cameo_810.dtsi"
 
 / {
        compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
@@ -17,22 +14,6 @@
                label-mac-device = &ethernet;
        };
 
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
        leds {
                compatible = "gpio-leds";
 
@@ -53,70 +34,6 @@
        };
 };
 
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       factory5g: partition@50000 {
-                               label = "factory5g";
-                               reg = <0x50000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "Wolf_Config";
-                               reg = <0x60000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@70000 {
-                               label = "MyDlink";
-                               reg = <0x70000 0x80000>;
-                               read-only;
-                       };
-
-                       partition@f0000 {
-                               label = "Jffs2";
-                               reg = <0xf0000 0x80000>;
-                               read-only;
-                       };
-
-                       partition@170000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x170000 0x690000>;
-                       };
-               };
-       };
-};
-
 &state_default {
        gpio {
                groups = "i2c", "uartf";
@@ -124,37 +41,9 @@
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0x28>;
-
-       mediatek,portmap = "llllw";
-};
-
 &gsw {
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
 
        mediatek,port4 = "ephy";
 };
-
-&pcie {
-       status = "okay";
-};
-
-&wmac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pa_pins>;
-
-       ralink,mtd-eeprom = <&factory 0x0>;
-       mtd-mac-address = <&factory 0x28>;
-};
-
-&pcie0 {
-       wifi@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&factory 0x28>;
-               mtd-mac-address-increment = <2>;
-       };
-};

diff --git a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
index 24d5fcb51f1f6b8f86051fbf3da2746a6e97fd5d..679b429b6de07972d05d33dd6c8699dab0f381f1 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
+++ b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
@@ -1,10 +1,7 @@
 //SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620a_cameo_810.dtsi"
 
 / {
        compatible = "trendnet,tew-810dr", "ralink,mt7620a-soc";
@@ -18,22 +15,6 @@
                label-mac-device = &ethernet;
        };
 
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
        leds {
                compatible = "gpio-leds";
 
@@ -59,70 +40,6 @@
        };
 };
 
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       factory5g: partition@50000 {
-                               label = "factory5g";
-                               reg = <0x50000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "Wolf_Config";
-                               reg = <0x60000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@70000 {
-                               label = "MyDlink";
-                               reg = <0x70000 0x80000>;
-                               read-only;
-                       };
-
-                       partition@f0000 {
-                               label = "Jffs2";
-                               reg = <0xf0000 0x80000>;
-                               read-only;
-                       };
-
-                       partition@170000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x170000 0x690000>;
-                       };
-               };
-       };
-};
-
 &state_default {
        gpio {
                groups = "i2c", "uartf", "ephy";
@@ -130,37 +47,10 @@
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0x28>;
-       mediatek,portmap = "llllw";
-};
-
 &gsw {
        mediatek,port4 = "ephy";
 };
 
-&pcie {
-       status = "okay";
-};
-
-&wmac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pa_pins>;
-
-       ralink,mtd-eeprom = <&factory 0x0>;
-       mtd-mac-address = <&factory 0x28>;
-};
-
-&pcie0 {
-       wifi@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-               mtd-mac-address = <&factory 0x28>;
-               mtd-mac-address-increment = <2>;
-       };
-};
-
 &gpio2 {
        status = "okay";
 };