brcm63xx: add support for the BCM96318REF_P300 board

Very similar to the BCM96318REF board except for the name and the
SDRAM/DDR configuration which is totally transparent for us.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39286

diff --git a/target/linux/brcm63xx/patches-3.10/556-board_96318ref_p300.patch b/target/linux/brcm63xx/patches-3.10/556-board_96318ref_p300.patch
new file mode 100644 (file)
index 0000000..c1fb272
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/556-board_96318ref_p300.patch
@@ -0,0 +1,104 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -186,6 +186,93 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_96318ref_p300 = {
++      .name                           = "96318REF_P300",
++      .expected_cpu_id                = 0x6318,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "96318REF_P300:red:post-failed",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF_P300:green:inet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF_P300:red:inet-fail",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF_P300::usb-pwron",
++                      .gpio           = 13,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "wps",
++                      .gpio                   = 33,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WPS_BUTTON,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 34,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -4123,6 +4210,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
++      &board_96318ref_p300,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,