ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
+ap90q|\
+dr531)
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
+
+ case "$board" in
+ ap90q)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ;;
+ esac
+ ;;
bhr-4grv2)
ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
;;
-dr531)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
- ;;
dragino2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"
--- /dev/null
+/*
+ * YunCore AP90Q board support
+ *
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP90Q_GPIO_LED_WAN 4
+#define AP90Q_GPIO_LED_WLAN 12
+#define AP90Q_GPIO_LED_LAN 16
+
+#define AP90Q_GPIO_BTN_RESET 17
+
+#define AP90Q_KEYS_POLL_INTERVAL 20
+#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ap90q_leds_gpio[] __initdata = {
+ {
+ .name = "ap90q:green:lan",
+ .gpio = AP90Q_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap90q:green:wan",
+ .gpio = AP90Q_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap90q:green:wlan",
+ .gpio = AP90Q_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button ap90q_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP90Q_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init ap90q_gpio_setup(void)
+{
+ /* For LED on GPIO4 */
+ ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
+
+ /* Mute LEDs on boot */
+ gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
+ gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
+
+ ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
+ ap90q_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap90q_gpio_keys),
+ ap90q_gpio_keys);
+}
+
+static void __init ap90q_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ap90q_gpio_setup();
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+
+ /* LAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup);
projects / openwrt / staging / thess.git / commitdiff