adm5120: use netdev_ops on kernels >= 2.6.30 (based on a patch by Alexandros C. Coulo...
authorGabor Juhos <juhosg@openwrt.org>
Thu, 17 Sep 2009 08:43:14 +0000 (08:43 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Thu, 17 Sep 2009 08:43:14 +0000 (08:43 +0000)
SVN-Revision: 17601

target/linux/adm5120/patches-2.6.30/810-adm5120sw-netdev_ops.patch [new file with mode: 0644]

diff --git a/target/linux/adm5120/patches-2.6.30/810-adm5120sw-netdev_ops.patch b/target/linux/adm5120/patches-2.6.30/810-adm5120sw-netdev_ops.patch
new file mode 100644 (file)
index 0000000..ae11650
--- /dev/null
@@ -0,0 +1,52 @@
+--- a/drivers/net/adm5120sw.c
++++ b/drivers/net/adm5120sw.c
+@@ -973,9 +973,12 @@ static void adm5120_if_set_multicast_lis
+ static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
+ {
+-      struct sockaddr *addr = p;
++      int ret;
++
++      ret = eth_mac_addr(dev, p);
++      if (ret)
++              return ret;
+-      memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+       adm5120_write_mac(dev);
+       return 0;
+ }
+@@ -1017,6 +1020,18 @@ static int adm5120_if_do_ioctl(struct ne
+       return 0;
+ }
++static const struct net_device_ops adm5120sw_netdev_ops = {
++        .ndo_open               = adm5120_if_open,
++        .ndo_stop               = adm5120_if_stop,
++        .ndo_start_xmit         = adm5120_if_hard_start_xmit,
++        .ndo_set_multicast_list = adm5120_if_set_multicast_list,
++        .ndo_do_ioctl           = adm5120_if_do_ioctl,
++        .ndo_tx_timeout         = adm5120_if_tx_timeout,
++        .ndo_validate_addr      = eth_validate_addr,
++        .ndo_change_mtu         = eth_change_mtu,
++      .ndo_set_mac_address    = adm5120_if_set_mac_address,
++};
++
+ static struct net_device *adm5120_if_alloc(void)
+ {
+       struct net_device *dev;
+@@ -1030,14 +1045,8 @@ static struct net_device *adm5120_if_all
+       priv->dev = dev;
+       dev->irq                = ADM5120_IRQ_SWITCH;
+-      dev->open               = adm5120_if_open;
+-      dev->hard_start_xmit    = adm5120_if_hard_start_xmit;
+-      dev->stop               = adm5120_if_stop;
+-      dev->set_multicast_list = adm5120_if_set_multicast_list;
+-      dev->do_ioctl           = adm5120_if_do_ioctl;
+-      dev->tx_timeout         = adm5120_if_tx_timeout;
++      dev->netdev_ops         = &adm5120sw_netdev_ops;
+       dev->watchdog_timeo     = TX_TIMEOUT;
+-      dev->set_mac_address    = adm5120_if_set_mac_address;
+ #ifdef CONFIG_ADM5120_SWITCH_NAPI
+       netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);