--- /dev/null
+ #ifndef __ASM_ARM_SYSTEM_MISC_H
+ #define __ASM_ARM_SYSTEM_MISC_H
+
+ #ifndef __ASSEMBLY__
+
+ #include <linux/compiler.h>
+ #include <linux/linkage.h>
+ #include <linux/irqflags.h>
+
+ extern void cpu_init(void);
+
+ void soft_restart(unsigned long);
+ extern void (*arm_pm_restart)(char str, const char *cmd);
++extern void (*arm_pm_idle)(void);
+
+ #define UDBG_UNDEFINED (1 << 0)
+ #define UDBG_SYSCALL (1 << 1)
+ #define UDBG_BADABORT (1 << 2)
+ #define UDBG_SEGV (1 << 3)
+ #define UDBG_BUS (1 << 4)
+
+ extern unsigned int user_debug;
+
+ extern void disable_hlt(void);
+ extern void enable_hlt(void);
+
+ #endif /* !__ASSEMBLY__ */
+
+ #endif /* __ASM_ARM_SYSTEM_MISC_H */
#include <mach/hardware.h>
#include <asm/leds.h>
- #include <asm/system.h>
#include <asm/mach-types.h>
+#include "core.h"
+
static spinlock_t leds_lock;
static void ebsa110_leds_event(led_event_t ledevt)
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+ #include <asm/system_info.h>
+
#include <plat/cpu.h>
+#include <mach/hardware.h>
+
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000
#include <linux/clockchips.h>
#include <linux/io.h>
- #include <asm/system.h>
-#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
#include <linux/clockchips.h>
#include <linux/io.h>
- #include <asm/system.h>
-#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
+ #include <asm/system_misc.h>
-#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/dma.h>
--- /dev/null
+/* linux/arch/arm/mach-s3c2410/s3c2410.c
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.simtec.co.uk/products/EB2410ITX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
++#include <asm/system_misc.h>
+
+#include <plat/cpu-freq.h>
+
+#include <mach/regs-clock.h>
+#include <plat/regs-serial.h>
+
+#include <plat/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/watchdog-reset.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2410_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+};
+
+/* our uart devices */
+
+/* uart registration process */
+
+void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2410_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2410_map_io(void)
+{
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
+
+ iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
+}
+
+void __init_or_cpufreq s3c2410_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long tmp;
+ unsigned long xtal;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long pclk;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ /* now we've got our machine bits initialised, work out what
+ * clocks we've got */
+
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
+
+ tmp = __raw_readl(S3C2410_CLKDIVN);
+
+ /* work out clock scalings */
+
+ hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
+ pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
+
+ /* print brieft summary of clocks, etc */
+
+ printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ /* initialise the clocks here, to allow other things like the
+ * console to use them
+ */
+
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+ .name = "armclk",
+ .parent = &clk_f,
+ .id = -1,
+};
+
+static struct clk_lookup s3c2410_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+};
+
+void __init s3c2410_init_clocks(int xtal)
+{
+ s3c24xx_register_baseclocks(xtal);
+ s3c2410_setup_clocks();
+ s3c2410_baseclk_add();
+ s3c24xx_register_clock(&s3c2410_armclk);
+ clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
+}
+
+struct bus_type s3c2410_subsys = {
+ .name = "s3c2410-core",
+ .dev_name = "s3c2410-core",
+};
+
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two subsystems with the same name.
+ */
+struct bus_type s3c2410a_subsys = {
+ .name = "s3c2410a-core",
+ .dev_name = "s3c2410a-core",
+};
+
+static struct device s3c2410_dev = {
+ .bus = &s3c2410_subsys,
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2410 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2410_core_init(void)
+{
+ return subsys_system_register(&s3c2410_subsys, NULL);
+}
+
+core_initcall(s3c2410_core_init);
+
+static int __init s3c2410a_core_init(void)
+{
+ return subsys_system_register(&s3c2410a_subsys, NULL);
+}
+
+core_initcall(s3c2410a_core_init);
+
+int __init s3c2410_init(void)
+{
+ printk("S3C2410: Initialising architecture\n");
+
+#ifdef CONFIG_PM
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
+ return device_register(&s3c2410_dev);
+}
+
+int __init s3c2410a_init(void)
+{
+ s3c2410_dev.bus = &s3c2410a_subsys;
+ return s3c2410_init();
+}
+
+void s3c2410_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ soft_restart(0);
+ }
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c2412/s3c2412.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
++#include <asm/system_misc.h>
+
+#include <plat/cpu-freq.h>
+
+#include <mach/regs-clock.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
+#include <plat/regs-spi.h>
+#include <mach/regs-s3c2412.h>
+
+#include <plat/s3c2412.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/nand-core.h>
+
+#ifndef CONFIG_CPU_S3C2412_ONLY
+void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+
+static inline void s3c2412_init_gpio2(void)
+{
+ s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+}
+#else
+#define s3c2412_init_gpio2() do { } while(0)
+#endif
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2412_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+ {
+ .virtual = (unsigned long)S3C2412_VA_SSMC,
+ .pfn = __phys_to_pfn(S3C2412_PA_SSMC),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)S3C2412_VA_EBI,
+ .pfn = __phys_to_pfn(S3C2412_PA_EBI),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+/* uart registration process */
+
+void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
+
+ /* rename devices that are s3c2412/s3c2413 specific */
+ s3c_device_sdi.name = "s3c2412-sdi";
+ s3c_device_lcd.name = "s3c2412-lcd";
+ s3c_nand_setname("s3c2412-nand");
+
+ /* alter IRQ of SDI controller */
+
+ s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
+ s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI;
+
+ /* spi channel related changes, s3c2412/13 specific */
+ s3c_device_spi0.name = "s3c2412-spi";
+ s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
+ s3c_device_spi1.name = "s3c2412-spi";
+ s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
+ s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
+
+}
+
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+ unsigned long tmp;
+
+ /* ensure our idle mode is to go to idle */
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ cpu_do_idle();
+}
+
+void s3c2412_restart(char mode, const char *cmd)
+{
+ if (mode == 's')
+ soft_restart(0);
+
+ /* errata "Watch-dog/Software Reset Problem" specifies that
+ * this reset must be done with the SYSCLK sourced from
+ * EXTCLK instead of FOUT to avoid a glitch in the reset
+ * mechanism.
+ *
+ * See the watchdog section of the S3C2412 manual for more
+ * information on this fix.
+ */
+
+ __raw_writel(0x00, S3C2412_CLKSRC);
+ __raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
+
+ mdelay(1);
+}
+
+/* s3c2412_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2412_map_io(void)
+{
+ /* move base of IO */
+
+ s3c2412_init_gpio2();
+
+ /* set our idle function */
+
+ arm_pm_idle = s3c2412_idle;
+
+ /* register our io-tables */
+
+ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
+}
+
+void __init_or_cpufreq s3c2412_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long tmp;
+ unsigned long xtal;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long pclk;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ /* now we've got our machine bits initialised, work out what
+ * clocks we've got */
+
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
+
+ clk_mpll.rate = fclk;
+
+ tmp = __raw_readl(S3C2410_CLKDIVN);
+
+ /* work out clock scalings */
+
+ hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
+ hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
+ pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
+
+ /* print brieft summary of clocks, etc */
+
+ printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
+ /* initialise the clocks here, to allow other things like the
+ * console to use them
+ */
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c2412_setup_clocks();
+ s3c2412_baseclk_add();
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2412 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+struct bus_type s3c2412_subsys = {
+ .name = "s3c2412-core",
+ .dev_name = "s3c2412-core",
+};
+
+static int __init s3c2412_core_init(void)
+{
+ return subsys_system_register(&s3c2412_subsys, NULL);
+}
+
+core_initcall(s3c2412_core_init);
+
+static struct device s3c2412_dev = {
+ .bus = &s3c2412_subsys,
+};
+
+int __init s3c2412_init(void)
+{
+ printk("S3C2412: Initialising architecture\n");
+
+#ifdef CONFIG_PM
+ register_syscore_ops(&s3c2412_pm_syscore_ops);
+#endif
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
+ return device_register(&s3c2412_dev);
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c2416/s3c2416.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * Samsung S3C2416 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
++#include <asm/system_misc.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/s3c2416.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/sdhci.h>
+#include <plat/pm.h>
+
+#include <plat/iic-core.h>
+#include <plat/fb-core.h>
+#include <plat/nand-core.h>
+#include <plat/adc-core.h>
+#include <plat/rtc-core.h>
+
+static struct map_desc s3c2416_iodesc[] __initdata = {
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+};
+
+struct bus_type s3c2416_subsys = {
+ .name = "s3c2416-core",
+ .dev_name = "s3c2416-core",
+};
+
+static struct device s3c2416_dev = {
+ .bus = &s3c2416_subsys,
+};
+
+void s3c2416_restart(char mode, const char *cmd)
+{
+ if (mode == 's')
+ soft_restart(0);
+
+ __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2416_init(void)
+{
+ printk(KERN_INFO "S3C2416: Initializing architecture\n");
+
+ /* change WDT IRQ number */
+ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_fb_setname("s3c2443-fb");
+
+ s3c_adc_setname("s3c2416-adc");
+ s3c_rtc_setname("s3c2416-rtc");
+
+#ifdef CONFIG_PM
+ register_syscore_ops(&s3c2416_pm_syscore_ops);
+#endif
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
+ return device_register(&s3c2416_dev);
+}
+
+void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+
+ s3c_nand_setname("s3c2412-nand");
+}
+
+/* s3c2416_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2416_map_io(void)
+{
+ s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+ s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
+
+ /* initialize device information early */
+ s3c2416_default_sdhci0();
+ s3c2416_default_sdhci1();
+
+ iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2416 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2416_core_init(void)
+{
+ return subsys_system_register(&s3c2416_subsys, NULL);
+}
+
+core_initcall(s3c2416_core_init);
--- /dev/null
+/* linux/arch/arm/mach-s3c2443/s3c2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2443 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
++#include <asm/system_misc.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/s3c2443.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/fb-core.h>
+#include <plat/nand-core.h>
+#include <plat/adc-core.h>
+#include <plat/rtc-core.h>
+
+static struct map_desc s3c2443_iodesc[] __initdata = {
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+};
+
+struct bus_type s3c2443_subsys = {
+ .name = "s3c2443-core",
+ .dev_name = "s3c2443-core",
+};
+
+static struct device s3c2443_dev = {
+ .bus = &s3c2443_subsys,
+};
+
+void s3c2443_restart(char mode, const char *cmd)
+{
+ if (mode == 's')
+ soft_restart(0);
+
+ __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2443_init(void)
+{
+ printk("S3C2443: Initialising architecture\n");
+
+ s3c_nand_setname("s3c2412-nand");
+ s3c_fb_setname("s3c2443-fb");
+
+ s3c_adc_setname("s3c2443-adc");
+ s3c_rtc_setname("s3c2443-rtc");
+
+ /* change WDT IRQ number */
+ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
+
+ return device_register(&s3c2443_dev);
+}
+
+void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2443_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2443_map_io(void)
+{
+ s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+ s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
+
+ iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2443 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2443_core_init(void)
+{
+ return subsys_system_register(&s3c2443_subsys, NULL);
+}
+
+core_initcall(s3c2443_core_init);
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
++#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <mach/regs-clock.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
+
+static struct map_desc s3c244x_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(void)
+{
+ /* register our io-tables */
+
+ iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+
+ /* rename any peripherals used differing from the s3c2410 */
+
+ s3c_device_sdi.name = "s3c2440-sdi";
+ s3c_device_i2c0.name = "s3c2440-i2c";
+ s3c_nand_setname("s3c2440-nand");
+ s3c_device_ts.name = "s3c2440-ts";
+ s3c_device_usbgadget.name = "s3c2440-usbgadget";
+}
+
+void __init_or_cpufreq s3c244x_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long clkdiv;
+ unsigned long camdiv;
+ unsigned long xtal;
+ unsigned long hclk, fclk, pclk;
+ int hdiv = 1;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ /* work out clock scalings */
+
+ switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
+ case S3C2440_CLKDIVN_HDIVN_1:
+ hdiv = 1;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_2:
+ hdiv = 2;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_4_8:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_3_6:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
+ break;
+ }
+
+ hclk = fclk / hdiv;
+ pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
+
+ /* print brief summary of clocks, etc */
+
+ printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
+ /* initialise the clocks here, to allow other things like the
+ * console to use them, and to add new ones after the initialisation
+ */
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c244x_setup_clocks();
+ s3c2410_baseclk_add();
+}
+
+/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
+
+struct bus_type s3c2440_subsys = {
+ .name = "s3c2440-core",
+ .dev_name = "s3c2440-core",
+};
+
+struct bus_type s3c2442_subsys = {
+ .name = "s3c2442-core",
+ .dev_name = "s3c2442-core",
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+ return subsys_system_register(&s3c2440_subsys, NULL);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+ return subsys_system_register(&s3c2442_subsys, NULL);
+}
+
+core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM
+static struct sleep_save s3c244x_sleep[] = {
+ SAVE_ITEM(S3C2440_DSC0),
+ SAVE_ITEM(S3C2440_DSC1),
+ SAVE_ITEM(S3C2440_GPJDAT),
+ SAVE_ITEM(S3C2440_GPJCON),
+ SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+static void s3c244x_resume(void)
+{
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume NULL
+#endif
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume,
+};
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+ if (mode == 's')
+ soft_restart(0);
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
#include <linux/ioport.h>
#include <linux/platform_device.h>
+#include <video/sa1100fb.h>
+
#include <asm/div64.h>
- #include <asm/system.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
+ #include <asm/system_misc.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#include "generic.h"
unsigned int reset_status;
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
+ #include <asm/system_misc.h>
+
static inline void arch_reset(char mode, const char *cmd)
{
soft_restart(0);
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
+ #include <asm/system_info.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
extern unsigned long max_pfn;
extern unsigned long memory_start;
-extern unsigned long memory_end;
extern unsigned long memory_size;
+extern unsigned long lowmem_size;
+
++extern unsigned long kernel_tlb;
+
extern int page_is_ram(unsigned long pfn);
# define phys_to_pfn(phys) (PFN_DOWN(phys))
#include <linux/semaphore.h>
#include <linux/oom.h>
#include <linux/oprofile.h>
-#include <asm/lowcore.h>
+
+ #include <asm/facility.h>
+#include <asm/cpu_mf.h>
#include <asm/irq.h>
#include "hwsampler.h"
#include <linux/opp.h>
#include <linux/cpu.h>
#include <linux/module.h>
+#include <linux/regulator/consumer.h>
- #include <asm/system.h>
#include <asm/smp_plat.h>
#include <asm/cpu.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
- #include <asm/system.h>
MODULE_AUTHOR("Vojtech Pavlik, Russell King");
MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
#include <linux/string.h>
#include <linux/mfd/mcp.h>
- #include <asm/system.h>
-#include <mach/dma.h>
--
#define to_mcp(d) container_of(d, struct mcp, attached_device)
#define to_mcp_driver(d) container_of(d, struct mcp_driver, drv)
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/mfd/mcp.h>
-#include <mach/dma.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
- #include <asm/system.h>
#include <mach/mcp.h>
-#include <mach/assabet.h>
-
+#define DRIVER_NAME "sa11x0-mcp"
struct mcp_sa11x0 {
- u32 mccr0;
- u32 mccr1;
+ void __iomem *base0;
+ void __iomem *base1;
+ u32 mccr0;
+ u32 mccr1;
};
+/* Register offsets */
+#define MCCR0(m) ((m)->base0 + 0x00)
+#define MCDR0(m) ((m)->base0 + 0x08)
+#define MCDR1(m) ((m)->base0 + 0x0c)
+#define MCDR2(m) ((m)->base0 + 0x10)
+#define MCSR(m) ((m)->base0 + 0x18)
+#define MCCR1(m) ((m)->base1 + 0x00)
+
#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
static void
#include <linux/delay.h>
#include <linux/gfp.h>
- #include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <linux/atomic.h>
#if ALLOW_DMA
#include <asm/dma.h>
#endif
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
#define DRV_NAME "advantechwdt"
-#define PFX DRV_NAME ": "
#define WATCHDOG_NAME "Advantech WDT"
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
-#define OUR_NAME "alim7101_wdt"
-#define PFX OUR_NAME ": "
-
#define WDT_ENABLE 0x9C
#define WDT_DISABLE 0x8C
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/atomic.h>
- #include <asm/system.h>
-#define SBC7240_PREFIX "sbc7240_wdt: "
-
#define SBC7240_ENABLE_PORT 0x443
#define SBC7240_DISABLE_PORT 0x043
#define SBC7240_SET_TIMEOUT_PORT SBC7240_ENABLE_PORT
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
-static int nowayout = WATCHDOG_NOWAYOUT;
+static bool nowayout = WATCHDOG_NOWAYOUT;
static unsigned int margin = 60; /* (secs) Default is 1 minute */
static unsigned long wdt_status;
static DEFINE_MUTEX(wdt_lock);
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
-#define OUR_NAME "sc520_wdt"
-#define PFX OUR_NAME ": "
-
/*
* The AMD Elan SC520 timeout value is 492us times a power of 2 (0-7)
*
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
-#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
static unsigned long wdt_is_open;
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
#define WATCHDOG_NAME "w83697hf/hg WDT"
-#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
#define WATCHDOG_EARLY_DISABLE 1 /* Disable until userland kicks in */
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
#define WATCHDOG_NAME "w83697ug/uf WDT"
-#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
static unsigned long wdt_is_open;
#include <linux/init.h>
#include <linux/io.h>
#include <linux/uaccess.h>
- #include <asm/system.h>
#define OUR_NAME "w83877f_wdt"
-#define PFX OUR_NAME ": "
#define ENABLE_W83877F_PORT 0x3F0
#define ENABLE_W83877F 0x87
#include <net/ipv6.h>
#include <linux/nfs_xdr.h>
#include <linux/sunrpc/bc_xprt.h>
+#include <linux/nsproxy.h>
+#include <linux/pid_namespace.h>
- #include <asm/system.h>
#include "nfs4_fs.h"
#include "callback.h"
#include <linux/slab.h>
#include <linux/compat.h>
#include <linux/freezer.h>
+#include <linux/crc32.h>
- #include <asm/system.h>
#include <asm/uaccess.h>
#include "nfs4_fs.h"
#include <linux/nfs_xdr.h>
#include <linux/magic.h>
#include <linux/parser.h>
+#include <linux/nsproxy.h>
+#include <linux/rcupdate.h>
- #include <asm/system.h>
#include <asm/uaccess.h>
#include "nfs4_fs.h"
#include <linux/kernel.h>
#include <linux/atomic.h>
- #include <asm/system.h>
+#include <linux/bug.h>
struct task_struct;
projects / openwrt / staging / blogic.git / commitdiff