ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
+bhr-4grv2)
+ ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
+ ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
+ ;;
bsb)
ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1"
;;
;;
ap135-020|\
ap136-020|\
+ bhr-4grv2|\
tew-823dru|\
tl-wr1043nd-v2|\
wzr-450hp2)
aw-nr580)
status_led="$board:green:ready"
;;
+ bhr-4grv2|\
+ wzr-hp-ag300h|\
+ wzr-hp-g300nh2)
+ status_led="buffalo:red:diag"
+ ;;
bsb)
status_led="$board:red:sys"
;;
wlae-ag300n)
status_led="buffalo:green:status"
;;
- wzr-hp-ag300h|\
- wzr-hp-g300nh2)
- status_led="buffalo:red:diag"
- ;;
r6100|\
wndap360|\
wndr3700|\
*AW-NR580)
name="aw-nr580"
;;
+ *BHR-4GRV2)
+ name="bhr-4grv2"
+ ;;
*CAP324)
name="cap324"
;;
ap83 |\
archer-c5 |\
archer-c7 |\
+ bhr-4grv2 |\
dir-505-a1 |\
gl-inet |\
jwap003 |\
ap152|\
ap96|\
arduino-yun|\
+ bhr-4grv2|\
bxu2000n-2-a1|\
db120|\
dr344|\
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_BHR_4GRV2=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_BSB=y
CONFIG_ATH79_MACH_C55=y
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_BHR_4GRV2
+ bool "Buffalo BHR-4GRV2 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
config ATH79_MACH_WHR_HP_G300N
bool "Buffalo WHR-HP-G300N board support"
select SOC_AR724X
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o
obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o
--- /dev/null
+/*
+ * Buffalo BHR-4GRV2 board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * Based on mach-ap136.c and mach-wzr-450hp2.c
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define BHR_4GRV2_GPIO_LED_VPN_RED 3
+#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18
+#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19
+#define BHR_4GRV2_GPIO_LED_DIAG_RED 20
+
+#define BHR_4GRV2_GPIO_BTN_RESET 17
+#define BHR_4GRV2_GPIO_BTN_ECO 21
+
+#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL)
+#define BHR_4GRV2_MAC0_OFFSET 0
+#define BHR_4GRV2_MAC1_OFFSET 6
+
+static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:vpn",
+ .gpio = BHR_4GRV2_GPIO_LED_VPN_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:vpn",
+ .gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:power",
+ .gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:red:diag",
+ .gpio = BHR_4GRV2_GPIO_LED_DIAG_RED,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BHR_4GRV2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "ECO button",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BHR_4GRV2_GPIO_BTN_ECO,
+ .active_low = 1,
+ },
+};
+
+/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
+static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
+static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
+ .pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg,
+ .pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &bhr_4grv2_ar8327_data,
+ },
+};
+
+static void __init bhr_4grv2_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio),
+ bhr_4grv2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(bhr_4grv2_gpio_keys),
+ bhr_4grv2_gpio_keys);
+
+ mdiobus_register_board_info(bhr_4grv2_mdio0_info,
+ ARRAY_SIZE(bhr_4grv2_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ /* GMAC0 is connected to the RGMII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0);
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2",
+ "Buffalo BHR-4GRV2", bhr_4grv2_setup);
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARDUINO_YUN, /* Yun */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
ATH79_MACH_C55, /* AirTight Networks C-55 */
endef
TARGET_DEVICES += dap-2695-a1
+
+define Build/mkbuffaloimg
+ $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
+ -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
+ -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
+ -i $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Device/bhr-4grv2
+ DEVICE_TITLE := Buffalo BHR-4GRV2
+ BOARDNAME := BHR-4GRV2
+ ROOTFS_SIZE := 14528k
+ KERNEL_SIZE := 1472k
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | mkbuffaloimg
+endef
+TARGET_DEVICES += bhr-4grv2
$(call cc,mkmerakifw sha1, -Wall)
$(call cc,mkmerakifw-old, -Wall)
$(call cc,jcgimage, -lz -Wall)
+ $(call cc,mkbuffaloimg, -Wall)
endef
define Host/Install
--- /dev/null
+/*
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * Based on mkdniimg.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h> /* for unlink() */
+#include <libgen.h>
+#include <getopt.h> /* for getopt() */
+#include <stdarg.h>
+#include <errno.h>
+#include <sys/stat.h>
+
+#define DNI_HDR_LEN 128
+
+/*
+ * Globals
+ */
+static char *ifname;
+static char *progname;
+static char *ofname;
+static char *version = "0.00_0.00";
+static char *region = "JP";
+static char *rootfs_size;
+static char *kernel_size;
+
+static char *board_id;
+/*
+ * Message macros
+ */
+#define ERR(fmt, ...) do { \
+ fflush(0); \
+ fprintf(stderr, "[%s] *** error: " fmt "\n", \
+ progname, ## __VA_ARGS__ ); \
+} while (0)
+
+#define ERRS(fmt, ...) do { \
+ int save = errno; \
+ fflush(0); \
+ fprintf(stderr, "[%s] *** error: " fmt ": %s\n", \
+ progname, ## __VA_ARGS__, strerror(save)); \
+} while (0)
+
+void usage(int status)
+{
+ FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout;
+
+ fprintf(stream, "Usage: %s [OPTIONS...]\n", progname);
+ fprintf(stream,
+"\n"
+"Options:\n"
+" -B <board> create image for the board specified with <board>\n"
+" -i <file> read input from the file <file>\n"
+" -o <file> write output to the file <file>\n"
+" -v <version> set image version to <version>\n"
+" -r <region> set image region to <region>\n"
+" -R <rootfs_size> set RootfsSize to <rootfs_size>\n"
+" -K <kernel_size> set KernelSize to <kernel_size>\n"
+" -h show this screen\n"
+ );
+
+ exit(status);
+}
+
+int main(int argc, char *argv[])
+{
+ int res = EXIT_FAILURE;
+ int buflen;
+ int err;
+ struct stat st;
+ char *buf;
+ int i;
+ uint8_t csum;
+
+ FILE *outfile, *infile;
+
+ progname = basename(argv[0]);
+
+ while ( 1 ) {
+ int c;
+
+ c = getopt(argc, argv, "B:i:o:v:r:R:K:h");
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'B':
+ board_id = optarg;
+ break;
+ case 'i':
+ ifname = optarg;
+ break;
+ case 'o':
+ ofname = optarg;
+ break;
+ case 'v':
+ version = optarg;
+ break;
+ case 'r':
+ region = optarg;
+ break;
+ case 'R':
+ rootfs_size = optarg;
+ break;
+ case 'K':
+ kernel_size = optarg;
+ break;
+ case 'h':
+ usage(EXIT_SUCCESS);
+ break;
+ default:
+ usage(EXIT_FAILURE);
+ break;
+ }
+ }
+
+ if (board_id == NULL) {
+ ERR("no board specified");
+ goto err;
+ }
+
+ if (rootfs_size == NULL) {
+ ERR("no rootfs_size specified");
+ goto err;
+ }
+
+ if (kernel_size == NULL) {
+ ERR("no kernel_size specified");
+ goto err;
+ }
+
+ if (ifname == NULL) {
+ ERR("no input file specified");
+ goto err;
+ }
+
+ if (ofname == NULL) {
+ ERR("no output file specified");
+ goto err;
+ }
+
+ err = stat(ifname, &st);
+ if (err){
+ ERRS("stat failed on %s", ifname);
+ goto err;
+ }
+
+ buflen = st.st_size + DNI_HDR_LEN + 1;
+ buf = malloc(buflen);
+ if (!buf) {
+ ERR("no memory for buffer\n");
+ goto err;
+ }
+
+ memset(buf, 0, DNI_HDR_LEN);
+ snprintf(buf, DNI_HDR_LEN, "device:%s\nversion:%s\nregion:%s\n"
+ "RootfsSize:%s\nKernelSize:%s\nInfoHeadSize:128\n",
+ board_id, version, region, rootfs_size, kernel_size);
+ buf[DNI_HDR_LEN - 2] = 0x12;
+ buf[DNI_HDR_LEN - 1] = 0x32;
+
+ infile = fopen(ifname, "r");
+ if (infile == NULL) {
+ ERRS("could not open \"%s\" for reading", ifname);
+ goto err_free;
+ }
+
+ errno = 0;
+ fread(buf + DNI_HDR_LEN, st.st_size, 1, infile);
+ if (errno != 0) {
+ ERRS("unable to read from file %s", ifname);
+ goto err_close_in;
+ }
+
+ csum = 0;
+ for (i = 0; i < (st.st_size + DNI_HDR_LEN); i++)
+ csum += buf[i];
+
+ csum = 0xff - csum;
+ buf[st.st_size + DNI_HDR_LEN] = csum;
+
+ outfile = fopen(ofname, "w");
+ if (outfile == NULL) {
+ ERRS("could not open \"%s\" for writing", ofname);
+ goto err_close_in;
+ }
+
+ errno = 0;
+ fwrite(buf, buflen, 1, outfile);
+ if (errno) {
+ ERRS("unable to write to file %s", ofname);
+ goto err_close_out;
+ }
+
+ res = EXIT_SUCCESS;
+
+ fflush(outfile);
+
+ err_close_out:
+ fclose(outfile);
+ if (res != EXIT_SUCCESS) {
+ unlink(ofname);
+ }
+
+ err_close_in:
+ fclose(infile);
+
+ err_free:
+ free(buf);
+
+ err:
+ return res;
+}
projects / openwrt / staging / neocturne.git / commitdiff