ipq806x: set IMAGES in Device/Default definition

The Device/Default definition sets a default IMAGE/sysupgrade.bin,
but does not enable it by setting IMAGES. This is not consistent,
and has led to IMAGES being defined at various other places in the
file.

Thus, this patch consolidates the default value for IMAGES by putting
it in Device/Default. Since it's still overwritten where necessary,
this patch is cosmetic.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index 6ea66d064dbfe96ad36ac31089db6652ac697aa0..578303e9e066faf3e2b0f8b71130d09c4b9725d3 100644 (file)
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -21,6 +21,7 @@ define Device/Default
        KERNEL_LOADADDR = 0x42208000
        DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
        SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+       IMAGES := sysupgrade.bin
        IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
        IMAGE/sysupgrade.bin/squashfs :=
 endef
@@ -57,7 +58,7 @@ define Device/DniImage
        NETGEAR_BOARD_ID :=
        NETGEAR_HW_ID :=
        UBINIZE_OPTS := -E 5
-       IMAGES := factory.img sysupgrade.bin
+       IMAGES += factory.img
        IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
        IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
 endef
@@ -67,7 +68,7 @@ define Device/TpSafeImage
        KERNEL = kernel-bin | append-dtb | uImage none
        KERNEL_NAME := zImage
        TPLINK_BOARD_ID :=
-       IMAGES := factory.bin sysupgrade.bin
+       IMAGES += factory.bin
        IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
        IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
 endef
@@ -76,7 +77,7 @@ define Device/ZyXELImage
        KERNEL_SUFFIX := -uImage
        KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
        KERNEL_NAME := zImage
-       IMAGES := factory.bin sysupgrade.bin
+       IMAGES += factory.bin
        IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
        IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 endef
@@ -90,7 +91,6 @@ define Device/buffalo_wxr-2533dhp
        PAGESIZE := 2048
        IMAGE_SIZE := 65536k
        KERNEL_IN_UBI := 1
-       IMAGES := sysupgrade.bin
        IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
                sysupgrade-tar rootfs=$$$$@ | append-metadata
        DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
@@ -121,7 +121,7 @@ define Device/linksys_ea8500
        BOARD_NAME := ea8500
        SUPPORTED_DEVICES += ea8500
        UBINIZE_OPTS := -E 5
-       IMAGES := factory.bin sysupgrade.bin
+       IMAGES += factory.bin
        IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
        DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 endef
@@ -134,7 +134,6 @@ define Device/nec_wg2600hp
        SOC := qcom-ipq8064
        BLOCKSIZE := 64k
        BOARD_NAME := wg2600hp
-       IMAGES := sysupgrade.bin
        IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
        DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
 endef
@@ -295,7 +294,6 @@ define Device/tplink_vr2600v
        BOARD_NAME := vr2600v
        SUPPORTED_DEVICES += vr2600v
        DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-       IMAGES := sysupgrade.bin
        IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 endef
 TARGET_DEVICES += tplink_vr2600v