zbt-wd323: add GPIO WDT support

Watchdog has not been properly configured for this router - the PCB has a
hardware watchdog connected to one of the GPIO pin 21 [1]
This commit provides this fix [2]

Without this fix, the ZBT-WD323 is unusable in OpenWRT because it power
cycles every 30 seconds due to the watchdog tripping

[1] https://forum.openwrt.org/t/zbt-wd323-router-power-cycles-every-30-seconds/77535/7
[2] https://forum.openwrt.org/t/zbt-wd323-images-unusable-proposed-workaround/162145/5

Signed-off-by: Joshua O'Leary <josh.oleary@mobile-power.co.uk>

diff --git a/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
index 8fc21be1dcb4965f886d483b72d09f31d6cc7383..8dc1ceb666608c76302ed183b7ccdecf11cf862a 100644 (file)
--- a/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
+++ b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
@@ -59,6 +59,14 @@
                        gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
                };
        };
+       
+       watchdog {
+               compatible = "linux,wdt-gpio";
+               gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+               hw_algo = "toggle";
+               hw_margin_ms = <30000>;
+               always-running;
+       };
 };
 
 &wdt {