ar71xx: add AVM FRITZ!WLAN Repeater 300E support
authorMathias Kresin <dev@kresin.me>
Fri, 30 Dec 2016 10:53:21 +0000 (11:53 +0100)
committerMathias Kresin <dev@kresin.me>
Sat, 24 Jun 2017 20:36:38 +0000 (22:36 +0200)
commite7cd6f5d66b827e31cfa7e7bc019ac1b86aac770
tree2266d211229d5045d0ea8d4e998164641272a5b7
parent0605b15be405ddaf9499e02f4b5a59ba406d2ccd
ar71xx: add AVM FRITZ!WLAN Repeater 300E support

Specifications:
* SoC: AR7242 (Virian 400MHz)
* RAM: 64 MB DDR (W9751G6JB-25)
* Flash: 16MB SPI flash (S25FL129PIF)
* WiFi: AR9382 (2.4/5GHz) + 2x SE2595L
* LAN: 1x1000M (PEF7071V)

To install LEDE via EVA bootloader, a FTP connection need to be
established to 192.168.178.1 within the first seconds after power on:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1

Signed-off-by: Mathias Kresin <dev@kresin.me>
15 files changed:
include/image-commands.mk
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/generic.mk
target/linux/ar71xx/mikrotik/config-default
target/linux/ar71xx/nand/config-default