ar71xx: add support for YunCore CPE830
authorPiotr Dymacz <pepe2k@gmail.com>
Sat, 8 Oct 2016 01:36:35 +0000 (03:36 +0200)
committerJohn Crispin <john@phrozen.org>
Mon, 21 Nov 2016 09:05:40 +0000 (10:05 +0100)
commite33dcd1cfe105cb0e1ad09887144e4911eac653f
treec51e1a2a3d0ffbb7f1dfb74414b9911eda6a3430
parentdcceea4fd3ac40db872a4feec23f656fa60fd0b3
ar71xx: add support for YunCore CPE830

CPE830 is a clone of AP90Q, with different type of antenna (panel)
and additional 4 LEDs for WiFi signal level indication.

Use the same flash approach as for YunCore AP90Q.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/generic.mk