ar71xx:add support for COMFAST CF-E375AC
authorDing Tengfei <dtf@comfast.cn>
Wed, 7 Feb 2018 03:47:52 +0000 (11:47 +0800)
committerJohn Crispin <john@phrozen.org>
Sun, 11 Feb 2018 15:20:24 +0000 (16:20 +0100)
commitbf66bb8c969c58ef658407165a74afbfb4055997
tree50a0fcc91fc8d08aaa841dca91a59029908c6c99
parentf17173f5a36999f070a2ccbde2953d5d0d98001b
ar71xx:add support for COMFAST CF-E375AC

COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on
Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337.

Short specification:

    2x 10/100/1000 Mbps Ethernet, with PoE support
    128MB of RAM (DDR2)
    16 MB of FLASH
    3T3R 2.4 GHz, 802.11b/g/n
    2T2R 5 GHz, 802.11ac/n/a, wave 2
    built-in 5x 3 dBi antennas
    output power (max): 500 mW (27 dBm)
    1x RGB LED, 1x button
    built-in watchdog chipset

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Ding Tengfei <dtf@comfast.cn>
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/generic/config-default
target/linux/ar71xx/image/generic.mk