gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
The PM runtime API can't be used in atomic contex on -RT even if
it's configured as irqsafe. As result, below error report can
be seen when PM runtime API called from IRQ chip's callbacks
irq_startup/irq_shutdown/irq_set_type, because they are
protected by RAW spinlock:
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: insmod
3 locks held by insmod/96:
#0: (&dev->mutex){......}, at: [<
c04752c8>] __driver_attach+0x54/0xa0
#1: (&dev->mutex){......}, at: [<
c04752d4>] __driver_attach+0x60/0xa0
#2: (class){......}, at: [<
c00a408c>] __irq_get_desc_lock+0x60/0xa4
irq event stamp: 1834
hardirqs last enabled at (1833): [<
c06ab2a4>] _raw_spin_unlock_irqrestore+0x88/0x90
hardirqs last disabled at (1834): [<
c06ab068>] _raw_spin_lock_irqsave+0x2c/0x64
softirqs last enabled at (0): [<
c003d220>] copy_process.part.52+0x410/0x19d8
softirqs last disabled at (0): [< (null)>] (null)
Preemption disabled at:[< (null)>] (null)
CPU: 1 PID: 96 Comm: insmod Tainted: G W O
4.1.3-rt3-00618-g57e2387-dirty #184
Hardware name: Generic DRA74X (Flattened Device Tree)
[<
c00190f4>] (unwind_backtrace) from [<
c0014734>] (show_stack+0x20/0x24)
[<
c0014734>] (show_stack) from [<
c06a62ec>] (dump_stack+0x88/0xdc)
[<
c06a62ec>] (dump_stack) from [<
c006ca44>] (___might_sleep+0x198/0x2a8)
[<
c006ca44>] (___might_sleep) from [<
c06ab6d4>] (rt_spin_lock+0x30/0x70)
[<
c06ab6d4>] (rt_spin_lock) from [<
c04815ac>] (__pm_runtime_resume+0x68/0xa4)
[<
c04815ac>] (__pm_runtime_resume) from [<
c04123f4>] (omap_gpio_irq_type+0x188/0x1d8)
[<
c04123f4>] (omap_gpio_irq_type) from [<
c00a64e4>] (__irq_set_trigger+0x68/0x130)
[<
c00a64e4>] (__irq_set_trigger) from [<
c00a7bc4>] (irq_set_irq_type+0x44/0x6c)
[<
c00a7bc4>] (irq_set_irq_type) from [<
c00abbf8>] (irq_create_of_mapping+0x120/0x174)
[<
c00abbf8>] (irq_create_of_mapping) from [<
c0577b74>] (of_irq_get+0x48/0x58)
[<
c0577b74>] (of_irq_get) from [<
c0540a14>] (i2c_device_probe+0x54/0x15c)
[<
c0540a14>] (i2c_device_probe) from [<
c04750dc>] (driver_probe_device+0x184/0x2c8)
[<
c04750dc>] (driver_probe_device) from [<
c0475310>] (__driver_attach+0x9c/0xa0)
[<
c0475310>] (__driver_attach) from [<
c0473238>] (bus_for_each_dev+0x7c/0xb0)
[<
c0473238>] (bus_for_each_dev) from [<
c0474af4>] (driver_attach+0x28/0x30)
[<
c0474af4>] (driver_attach) from [<
c0474760>] (bus_add_driver+0x154/0x200)
[<
c0474760>] (bus_add_driver) from [<
c0476348>] (driver_register+0x88/0x108)
[<
c0476348>] (driver_register) from [<
c0541600>] (i2c_register_driver+0x3c/0x90)
[<
c0541600>] (i2c_register_driver) from [<
bf003018>] (pcf857x_init+0x18/0x24 [gpio_pcf857x])
[<
bf003018>] (pcf857x_init [gpio_pcf857x]) from [<
c000998c>] (do_one_initcall+0x128/0x1e8)
[<
c000998c>] (do_one_initcall) from [<
c06a4220>] (do_init_module+0x6c/0x1bc)
[<
c06a4220>] (do_init_module) from [<
c00dd0c8>] (load_module+0x18e8/0x21c4)
[<
c00dd0c8>] (load_module) from [<
c00ddaa0>] (SyS_init_module+0xfc/0x158)
[<
c00ddaa0>] (SyS_init_module) from [<
c000ff40>] (ret_fast_syscall+0x0/0x54)
The IRQ chip interface defines only two callbacks which are executed in
non-atomic contex - irq_bus_lock/irq_bus_sync_unlock, so lets move
PM runtime calls there.
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Austin Schuh <austin@peloton-tech.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>