ramips: enable flashing WizFi630S via OEM firmware
authorTobias Welz <tw@wiznet.eu>
Mon, 3 Aug 2020 19:28:31 +0000 (21:28 +0200)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Wed, 5 Aug 2020 21:08:03 +0000 (23:08 +0200)
commit816973f42aa47d910d3e35c2f8f8eb9d67416396
tree64cab8e8429c6678dc0e90de6000a6091e5125a6
parent7c1c0a00fc7948d119a3e3a0dc7a8e89a5c54acc
ramips: enable flashing WizFi630S via OEM firmware

WIZnet WizFi630s board name is written slightly different it its OEM
OpenWrt firmware. This causes an incompatibility warning during flashing
with sysupgrade. This patch is adding the vendor board name to the
supported devices list to avoid this warning. For initial flashing you
can use sysupgrade via command line or luci beside of TFTP.
Do not keep the OEM configuration during sysupgrade.

Signed-off-by: Tobias Welz <tw@wiznet.eu>
target/linux/ramips/image/mt76x8.mk