ath79: add d-link dir-825-c1 and dir-835-a1
authorSebastian Kemper <sebastian_ml@gmx.net>
Sat, 1 Dec 2018 18:41:34 +0000 (19:41 +0100)
committerChristian Lamparter <chunkeey@gmail.com>
Sun, 16 Dec 2018 23:21:34 +0000 (00:21 +0100)
commit6c3c4436ee1af0742de7c29bd9c4f10990ed2019
tree9c1c366c654a69c16e30d149b3a3323f6b7474ae
parent247fdceab6caa1d3bc29ca629833a2f705eb9d59
ath79: add d-link dir-825-c1 and dir-835-a1

This commit ports both dir-825-c1 and dir-835-a1 from ar71xx to ath79.
They're pretty much identical, except dir-835-a1 has less LEDs.

The routers come with 128 MByte of RAM and 16 MBytes of flash and sport
2.4GHz and 5.0GHz wireless. Both routers have entries already in
OpenWrt's TOH. Please check there for more information on these
antiquities.

https://openwrt.org/toh/hwdata/d-link/d-link_dir-825_c1
https://openwrt.org/toh/hwdata/d-link/d-link_dir-835_a1

Installation:

1. Connect to the web interface of the vendor firmware (usually
   listening on 192.168.0.1).
2. Go to "Tools", then "Firmware".
3. In the "Firmware Upgrade" box click "Browse".
4. Select the OpenWrt factory image for your router.
5. Click "Upload", confirm the popups if you agree to flash the file you
   selected.
6. Wait for firmware upgrade to complete. It takes about 5 minutes.

Run-tested on dir-825-c1. dir-835-a1 should work as well, but I don't
have this router so I can't confirm.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [trivial changes]
include/image-commands.mk
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/base-files/etc/board.d/03_gpio_switches
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
target/linux/ath79/dts/ar9344_dlink_dir-825-c1.dts [new file with mode: 0644]
target/linux/ath79/dts/ar9344_dlink_dir-835-a1.dts [new file with mode: 0644]
target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi [new file with mode: 0644]
target/linux/ath79/image/generic.mk