clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK

clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK

Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk
tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to
enter the ldb_di_ipu_div divider. If the divider gets locked up, no
ldb_di[x]_clk is generated, and the LVDS display will hang when the
ipu_di_clk is sourced from ldb_di_clk.

To fix the problem, both the new and current parent of the ldb_di_clk
should be disabled before the switch. This patch ensures that correct
steps are followed when ldb_di_clk parent is switched in the beginning
of boot. The glitchy muxes are then registered as read-only. The clock
parent can be selected using the assigned-clocks and
assigned-clock-parents properties of the ccm device tree node:

        &clks {
                assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
                                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
                assigned-clock-parents = <&clks IMX6QDL_CLK_MMDC_CH1_AXI>,
                                         <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
        };

The issue is explained in detail in EB821 ("LDB Clock Switch Procedure &
i.MX6 Asynchronous Clock Switching Guidelines") [1].

[1] http://www.nxp.com/files/32bit/doc/eng_bulletin/EB821.pdf

Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Akshay Bhat <akshay.bhat@timesys.com>
Tested-by Joshua Clayton <stillcompiling@gmail.com>
Tested-by: Charles Kang <Charles.Kang@advantech.com.tw>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>