ath79: add support for 8devices Rambutan board
authorAndrey Bondar <a.bondar@8devices.com>
Fri, 26 Jun 2020 08:16:00 +0000 (11:16 +0300)
committerPetr Štetiar <ynezz@true.cz>
Tue, 7 Jul 2020 17:47:24 +0000 (19:47 +0200)
commit326e488c7b02fb291e0b01970db3482284307c8d
tree18291117b0b51bea45da76917c3ede3678c24a69
parent4e57fd5adaf0c937da1e947f32dfa9ae513637a5
ath79: add support for 8devices Rambutan board

Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 2x USB2.0 host
- 2x UART
- SPI, I2C, GPIO

Flash instructions:

Upgrade from ar71xx target:
 sysupgrade -F /tmp/openwrt-ath79-nand-8dev_rambutan-squashfs-sysupgrade.tar
or upgrade from GUI (don't save config)

Use factory image to flash from U-Boot:
 tftpboot 80060000 openwrt-ath79-nand-8dev_rambutan-squashfs-factory.ubi
 nand erase.part ubi
 nand write 80060000 ubi ${filesize}

Signed-off-by: Petr Štetiar <ynezz@true.cz> [copy&pasted missing commit description]
Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
target/linux/ath79/config-4.19
target/linux/ath79/config-5.4
target/linux/ath79/dts/qca9557_8dev_rambutan.dts [new file with mode: 0644]
target/linux/ath79/image/nand.mk
target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom