git.openwrt.org Git - openwrt/staging/blogic.git/commit

author	Anton Vorontsov <avorontsov@ru.mvista.com>
	Sat, 10 Jan 2009 02:03:21 +0000 (05:03 +0300)
committer	Greg Kroah-Hartman <gregkh@kvm.kroah.org>
	Wed, 28 Jan 2009 00:15:38 +0000 (16:15 -0800)
commit	236dd4d18f293e3c9798f35c08272196826a980d
tree	5e8f7dc48318e82c34758c1a807d034034b96221	tree \| snapshot
parent	fc91be2ad03e0d243418414a854665274d560ca2	commit \| diff

USB: Driver for Freescale QUICC Engine USB Host Controller

This patch adds support for the FHCI USB controller, as found
in the Freescale MPC836x and MPC832x processors. It can support
Full or Low speed modes.

Quite a lot the hardware is doing by itself (SOF generation, CRC
generation and checking), though scheduling and retransmission is on
software's shoulders.

This controller does not integrate the root hub, so this driver also
fakes one-port hub. External hub is required to support more than
one device.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/Makefile		diff \| blob \| history
drivers/usb/host/Kconfig		diff \| blob \| history
drivers/usb/host/Makefile		diff \| blob \| history
drivers/usb/host/fhci-dbg.c	[new file with mode: 0644]	blob
drivers/usb/host/fhci-hcd.c	[new file with mode: 0644]	blob
drivers/usb/host/fhci-hub.c	[new file with mode: 0644]	blob
drivers/usb/host/fhci-mem.c	[new file with mode: 0644]	blob
drivers/usb/host/fhci-q.c	[new file with mode: 0644]	blob
drivers/usb/host/fhci-sched.c	[new file with mode: 0644]	blob
drivers/usb/host/fhci-tds.c	[new file with mode: 0644]	blob
drivers/usb/host/fhci.h	[new file with mode: 0644]	blob