ath79: add support for the TP-LINK WBS510 V1
authorAndrew Cameron <apcameron@softhome.net>
Fri, 8 Nov 2019 03:36:02 +0000 (21:36 -0600)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Fri, 22 Nov 2019 10:41:27 +0000 (11:41 +0100)
commit20fdfe37d21f19901eec86ace8da0c083faa7ebc
tree407681d561a163b3c990dcb839876ceec3b64865
parent5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21
ath79: add support for the TP-LINK WBS510 V1

This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts [new file with mode: 0644]
target/linux/ath79/generic/base-files/etc/board.d/01_leds
target/linux/ath79/generic/base-files/etc/board.d/02_network
target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
target/linux/ath79/image/generic-tp-link.mk
tools/firmware-utils/src/tplink-safeloader.c