at86rf230: mask irq's before deregister device
While transmit over a at86rf231 device and unloading the module I got:
[ 29.643073] WARNING: CPU: 0 PID: 3 at kernel/workqueue.c:1335 __queue_work+0xb4/0x224()
[ 29.651457] Modules linked in: at86rf230(-) autofs4
[ 29.656612] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W
3.14.0-rc6-01602-g902659e-dirty #294
[ 29.666490] [<
c00124f0>] (unwind_backtrace) from [<
c0010ad0>] (show_stack+0x10/0x14)
[ 29.674628] [<
c0010ad0>] (show_stack) from [<
c0032c80>] (warn_slowpath_common+0x60/0x80)
[ 29.683116] [<
c0032c80>] (warn_slowpath_common) from [<
c0032d30>] (warn_slowpath_null+0x18/0x20)
[ 29.692329] [<
c0032d30>] (warn_slowpath_null) from [<
c0045b08>] (__queue_work+0xb4/0x224)
[ 29.700906] [<
c0045b08>] (__queue_work) from [<
c0045cc8>] (queue_work_on+0x50/0x78)
[ 29.708944] [<
c0045cc8>] (queue_work_on) from [<
c05669cc>] (mac802154_tx+0x1e4/0x240)
[ 29.717164] [<
c05669cc>] (mac802154_tx) from [<
c0471814>] (dev_hard_start_xmit+0x2f0/0x43c)
[ 29.725926] [<
c0471814>] (dev_hard_start_xmit) from [<
c04878d0>] (sch_direct_xmit+0x64/0x2a0)
[ 29.734867] [<
c04878d0>] (sch_direct_xmit) from [<
c0487c38>] (__qdisc_run+0x12c/0x18c)
[ 29.743169] [<
c0487c38>] (__qdisc_run) from [<
c046e1b0>] (net_tx_action+0xe0/0x178)
[ 29.751205] [<
c046e1b0>] (net_tx_action) from [<
c0036690>] (__do_softirq+0x100/0x264)
[ 29.759420] [<
c0036690>] (__do_softirq) from [<
c0036818>] (run_ksoftirqd+0x24/0x4c)
[ 29.767453] [<
c0036818>] (run_ksoftirqd) from [<
c005232c>] (smpboot_thread_fn+0x128/0x13c)
[ 29.776121] [<
c005232c>] (smpboot_thread_fn) from [<
c004c3fc>] (kthread+0xd0/0xe4)
[ 29.784061] [<
c004c3fc>] (kthread) from [<
c000da88>] (ret_from_fork+0x14/0x2c)
[ 29.791628] ---[ end trace
3406ff24bd973834 ]---
The problem is there are still interrupts after deregister ieee802154
device. This patch mask all interrupts in the at86rf2xx chips before
deregister the device.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>